Airport express light not coming on

when connected to outlet and modem. does this mean the airport express has suddenly and completely stopped working? will a hard factory reset fix this?

If the AirPort Express is plugged into a working AC socket and the light is not on, unfortunately the power supply section of the AirPort Express has very likely failed.
You can try a Factory Default Reset if you want, but it will be of no use if the power supply has failed.
Unplug the Express from power
Wait a minute
Hold in the reset button on the Express first, and keep holding it in for another 9-10 seconds while you simultaneously plug the Express back into AC power
Release the reset button after the hold period and allow a full minute for the Express to restart
If the reset has somehow ressurrected the Express, you will see a solid amber light for about 30-40 seconds that will change to slow blinking at about 45 seconds. That would be your signal that the Express has been reset and now can be configured again.
If the light remains off, the Express will need to be replaced.

Similar Messages

My airport express light is flashing orange, not sure how to fix this, can someone assist pls?

my airport express light is flashing orange
can someone help to fix this? please

Open AirPort Utility - it's in your Mac's Utilities folder. Click the amber dot. It will tell you the reason it's asking for attention.

Airport Express will not talk to my router

I have 2 airport express stations that are 6.3 and they have always been able to connect to my qwest wireless router no prob. I've recently updated to Leopard and was surprised to see the new airport utility instead of the airport admin and airport setup tools. I like the new utility and interface as it seems less confusing than the old but now I'm having issues.
1. I can get the new utility to recognize my airport express ONLY when I do a hard reset to the airport express.
2. As I've done many times in the past, I go through the following setup protocol to join my current wireless network. I simply want to join my current network so I can talk to my stereo and printer wirelessly.
3. When I finish the setup and hit update, the airport utility updates the express successfully and then attempts to restart the express in order to join my network. This is where the problem lies.
*Here's the error message I get:*
AirPort Utility was unable to find your Apple wireless device after restarting.
The settings for this Apple wireless device have been successfully updated, but there was a problem re-joining the wireless network or finding the Apple wireless device. You may need to select your network from the AirPort menu and try again.
Now, I've tried repeating this process 10 times with both airport express stations and the same result happens? Remember, the only way for the utility to find the express is to hard reset the express. What gives? I bought both of these express stations over a year ago and they've been working fine til now. Because they are older and updated to 6.3, I shouldn't update them to the 802.11n7.3.1 update or should I? Is there something different about this new airport utility in Leopard that is causing the problem?
Like I said, I've done this exact same thing many times and its pretty straight forward but I'm stumped.
Anyone? Thanks in advance

I've got the solution! It took me some fair hours, though...
It seems the Airport Express can not handle the WEP-encryption properly, nor the 64 or the 128 bit versions. Here's how to work around it:
1) change your routers encryption to WPA2 with passkey (WPA-2-PSK). You may use the 10-digit code supplied with most routers or any of your own choice.
2) Change all wireless cards in your network to WPA2-PSK. It can take some time to figure it all out, but in the end you'll fix it. I had to download a new driver for my D-Link card DWL-G650 for instance.
3) Do the usual config thing with the Airport Express. Choose to connect to an existing network, apply the 10-digit passkey (be sure to choose the WPA2-PSK-option in the drop down-menu).
4) Off you go! Itunes will find the remote speakers, green lights all over and everybody turns happy...
/W

Airport Express light went out, stopped working.

Airport Express light went out. iMac says the connection is "excellent," but it's not working (I use it to stream audio) and is getting very warm. Did it die?

The usual cause of a dark LED is a failed AirPort Express. The reason your iMac reports an "excellent" connection is a mystery, but would be explained if it is actually connected to a different wireless network.
The only potential remedy is a "hard reset" (see below). In rare occasions, repetitive and persistent attempts have been known to revive an ailing Express. There isn't anything else you can do. A "factory defaults reset" is identical, but is performed by keeping its reset button depressed while connecting it to power. Try that also.
To "hard reset" an AirPort Base Station: make sure it's powered up, then gently press and hold its tiny reset button. Don't apply any more force than required to feel a tactile click. Keep it depressed for five to ten seconds, long enough for its LED to flash amber rapidly. Release the reset button. Then, the LED will glow amber steadily for about a minute. Then, it will flash amber, slowly, about once every second or two, waiting for you to configure it with AirPort Utility.

Airport express does not appear in Airport Utility

Hello,
I am having problems connecting my Airport Express to my network.
My configuration is all Apple. I am attempting to set up Airtunes. I have an Airport Extreme (software version 5.7) plus Airport Express. The Airport Extreme is hardwired to my Power Mac G5 (10.5.6) via ethernet. Wireless security is WEP 128 bit.
The Airport Express appears to establish a connection with no problems. The indicator light on the Express goes through normal start up and then a steady solid green.
Airport Utility shows the Airport Extreme but the Airport Express is not listed.
Any suggestions on how to make the connection are appreciated!
Thank you!

When having difficulties accessing the AirPort thru the AirPort Utility, try the following, in order checking accessibility with the AirPort Utility after each step:
o Check the local connection. If you are trying to access the AirPort wirelessly, make sure that you are connected to its wireless network before running the AirPort Utility to administer it. If you are still unable to access it with the utility, temporarily connect your computer directly using an Ethernet cable to one of the base station's LAN ports.
o Power cycle the base station. Remove the power adapter's plug from the power outlet, and then, wait 15 seconds before plugging it back in.
o Perform a "factory default" (AirPort Express) or "hard" (AirPort Extreme / Time Capsule) reset.

AirPort Express will not extend Wireless Network

Hello. My airport express will not extend my wireless network. It was green for about the first 4 hours and then I've had a flashing yellow light since that time. I've reset it a bunch of times and even have the AE in the same room as my AP Extreme. I complete the setup and then it continues to flash yellow. Can ayone give me a hand?

In the cases where the AirPort base stations would be interconnected by Ethernet you want to configure then for a roaming network, NOT an extended network. Apple uses the term "extended" when the base stations use wireless connection. Regardless of naming convention the end results is pretty much the same.
The link I provided should provide you with the necessary steps to set this type of network up.
If you need additional help, please start a new post as the solution for you will be different than the OPs. Thx!

Help Needed: Airport Express does not work

My Airport Express was ok until one day I setup it under bridge mode in a hotel room. Now neither my iMac and Dell laptop can update the settings in the Airport Express. It always shows error in reading the settings.
I have tried soft, hard reset and also tried to bring it back to factory settings. However, all these trials were not successful. It did not even blink with green light when I tried to reset it to factory settings (hold the reset pin, plug in power socket and then release the pin... I believe I did it right).
Also the network name I created in this Airport Express did not change to default name. The Airport Express name was restored to default though.
Does anyone know how to fix this? Do I have to send the hardware to Apple to fix it or it is just a software failure that I can fix at home with you guys help?
Thanks!

Same problem here -- followed instructions to do factory reset to a "T", never saw blinking green LED. Instead led blinks yellow. Always get an error in Airport Utility.
Apple had best quit poking fun at how lousy Microsoft stuff is before someone sees the large number of product complaints logged in the forums. It isn't smart to toss stones in a glass house.

My new airport express does not connect my printer to my computer? My old airport did! then I updated to OS 10.9.2. How do I get it connected?

My new airport express does not connect my printer to my computer. The old airport did. I recently updated to OS 10.9.2. I have since bought a new
HP 6700 all in one wireless printer, got the latest Comcast router. None of which connect to my computer wirelessly. Which do I throw away the printer, router, or Mac? Help

Contact HP for support.
Explain that you are using a Mac, anticipate the inevitable groan, and wait patiently for their resident Mac expert to return from vacation.
Until then download and install its driver here: http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?product=5058338&cc=us&dlc=en &lc=en
Otherwise return the printer and purchase one from a company that visibly supports OS X. HP isn't on that list.

"Airport Express" is not compatible with this version of itunes

Hello- My itunes reports that my airport express is not compatible with this version of itunes. My ipod and iphone no longer sync with the device either. Any suggestions? Thanks!

Does anyone out there have any advice? I have had no success correcting this problem........

HT1515 my airport express in not detected?

my airport express in not detected by my airport utility, and i want to conected to the wi fi of an internet conection.

In order for AirPort Utility to be able to detect your AirPort Express you need to either be connected to the AirPort Express via WiFi or by connecting an ethernet cable from your computer to the Express.

Hi, The Airport Express does not work with iOS 7.0.4, I appreciate your help to resolve this event. Thank you,

Hi, The Airport Express does not work with iOS 7.0.4, I appreciate your help to resolve this event. Thank you,

Please locate the model number of the AirPort Express and post back that information.
The model number is located on the side of the AirPort Express. It begins with an "A" followed by four numbers.
We are not sure what you mean by "does not work". Does this mean that the AirPort Express worked at one time and has just recently stopped working?
Have you installed a newer operating system on your iOS device recently?
Or, is this a new AirPort Express that you are trying to configure for the first time?
If yes, what service will the AirPort Express perform on your network?
Please remember that we cannot see your network, so we only know as much about your problem as you can tell us.

Airport Express suddenly not extending

First, some technical info.
I am using a late model Airport Extreme with an early model Airport Express to extend my network. All has been working fine until recently. The Airport Express blinks amber and the utility says the connection is good but that the Base Station was unable to extend the network. I have not many any changes to either my Airport Extreme or the Airport Express. Have unplugged the Express and plugged it back in, but get the same result. What would cause it to suddenly drop off the network? Thoughts?

AMAZING!
Setup: AirPort Express extends Time Capsule both on 7.6.4
Symptom: Suddenly AirPort Express blinks and AirPort Utility says AirPort Express seems to have problem extending the network
Solution: Google "airport express not extending" and click link to "Airport Express suddenly not extending"
Problem solved in seconds!
PS: I wasted 5 minutes earlier when I pressed the reset button in my AirPort Express hardware and had to reconnect it to my internet connection as the extending network although the setup was very intuitively easy ( a very intelligent setup sequence all figured out by Apple ) ... then I read this !

Need Help...my wireless airport express will not work with my update of snow leopard

after installing snow leopard on my macbook pro my airport express will not work...or will connect only for a minute at a time.

If you mean by "airport express" the square airport router you plug in and has a usb port then run the Airport Utility located in your Utilities folder to set it up again. If AU doesn't see it you may need to do a re-set of the AE.

How do I set up my Airport Express and not interrupt my TIme Capsule

I have ATT UVerse recently installed and have my Time Capsule Router Behind their installed router. I recently purchased Airport Extreme and want to install it as well so I can connect an older Version of a Sony PS3 which doesn't have bluetooth capability via rj45 since the time capsule is no where close to my PS3. Is there a way to install this Airport Express and not mess up the settings of the Time Capsule?

Hello hbwilli. Welcome to the Apple Discussions!
I recently purchased Airport Extreme and want to install it as well so I can connect an older Version of a Sony PS3 which doesn't have bluetooth capability via rj45 since the time capsule is no where close to my PS3. Is there a way to install this Airport Express and not mess up the settings of the Time Capsule?
Yes. You will want to configure the new 802.11n AirPort Express Base Station (AXn) as a ProxySTA. In this configuration, the AXn will join the wireless network created by the Time Capsule and share Internet access through its Ethernet port to the PS3.
To activate ProxySTA, you must set up the Express to join a wireless network and then enable the Allow Ethernet Clients setting; both settings are located in the Wireless tab of AirPort Utility. The feature should work with any wireless network: a, b, g, or n; and 5GHz or 2.4GHz. (Note that the Express, which ships with firmware 7.3, must also be updated to firmware 7.3.1 for this feature to appear.)

My airport express is not recognizing an IP address. How can this be fixed?

My airport Express is not recognizing an IP address. How can this be fixed?

I would recommend that you do the following as a minimum:
Power-down the modem, AirPort base station, and computer(s).
While all of the devices are powered-down, perform a "factory default" reset on the base station. This will get it back to its "out-of-the-box" configuration and make setting it up much easier, especially if you use the "Assist me" process within the AirPort Utility. (ref: Resetting an AirPort Base Station or Time Capsule)
After the base station resets, go ahead and power it back down.
Power-up the modem; wait at least 10-15 minutes.
Power-up the base station; wait at least 5-10 minutes.
Power-up your computer(s).
In this basic configuration, computers connected to the base station, either by wire or wireless (as appropriate for the base station type), should now be able to access the Internet through the ISP's modem. Once Internet connectivity has been verified, you can use the AirPort Utility to configure the base station for wireless security and any other desired options.

Airport express light not coming on

Similar Messages

Maybe you are looking for