Airport Express linked to a WIFI router Reconfiguring

I have just installed a new Netgear WIFI router usinging an XP desktop and need to recongigure my AE again to play itunes. The problems is I have forgotten how to do this. Someone I know has written a good idiots guide toi this but I cannot find it on the discssions. Could someone send or link it to me again. Thanks

To set up AirTunes on the AirPort Express Base Station (AX), connect your computer directly (using an Ethernet cable) to the Ethernet port of the AX, and then, use the AirPort Admin Utility to check these settings:
AirPort tab
- Base Station Name: <whatever you wish or use the default>
- Wireless Mode: Join an Existing Wireless Network (Wireless Client)
- Wireless Network: <select the existing Netgear wireless network>
Music tab
- Enable AirTunes on this base station (checked)
- Enable AirTunes over the Ethernet port (optional)
- iTunes Speaker Name: <whatever you wish>
- iTunes Speaker Password (optional)
In iTunes:
iTunes > Preferences... > Advanced > General
- Look for remote speakers connected with AirTunes (checked)

Similar Messages

Any speed difference between Apple Wifi Router(air express) and Tp link(or others) wifi router)

Any speed difference between Apple Wifi Router(air express) and Tp link(or others) wifi router?
I'm using a tp link router and sometimes it takes a long time delay for my 2 mac computers to connect each other. I don't know this is because of the router compability or the computers.

Anyone knows?

Tried to use my two airport express to extend my wifi network on a windows pc but no success

Tried to use my two airport express to extend my wifi network on a windows pc but no success

My two airport express base stations are 802.11n and i am triying to use them extend my wireless network which is using a D link wirless router as supplied my my ISP connected to TalkTalk network.
Unless the D-Link wireless router has Ethernet ports for each of the 802.11n AirPort Express Base Stations (AXn) to connect to, they will NOT be able to extend the wireless range of the D-Link.
Instead, when directly connected and reconfigured for a roaming network, these base stations CAN extend the range.
Please check out this Apple Support article on how to use AirPorts to extend a wireless network.
The key is to have both AXns configured as follows:
As a bridge.
Each having a unique Base Station Name.
Both using the same Network Name (or SSID), wireless security type and password as the D-Link.
Each AXn to use a channel at least 3-5 channels apart both from each other and that of the D-Link.

Trying to connect my airport express to my home WIFI

Hi,
I have been trying to connect a airport express to my home WIFI connection for the purpose of wirelessly transmitting itunes to my Alfresco area using my iphone as a remote.
The problem i currently have is that the airport does not seem to pick up my wireless broadband.
My router is a Netgear dgnd3700.
The procedure i followed so far is : 1. Reset the airport back to factory settings.
2. Plug the ethernet cable in and open airport utility.
3. Tick the circle saying " join existing network ". Here's the problem, my wireless network does not show up.
I can type in the name of my network and also the password but the airport is not picking up the signal .... i cant choose a network.
I can create a new network no worries and connect devices to it but that's not what i'm after. I'd like to join my existing network so i can transmit itunes to my amp.
I've gone through the discussion forum but can't find an answer. I have also tried to manually set up the connection .. same result.
Any help would be great ... i'm about to give up and think it was abad idea ....

If it is the old G version Express you cannot use 6.3 utility.
You must use the 5.6 utility.
How to load 5.6 into ML.
1. Download 5.6 for Lion.
http://support.apple.com/kb/DL1482
Click to open the dmg but do not attempt to install the pkg.. it won't work anyway.
Leave the package open on the desktop so you can see the file. AirportUtility56.pkg
2. Download and install unpkg.
http://www.timdoug.com/unpkg/
Run unpkg on the desktop.. If your Mac refuses to run the software, because it wasn’t downloaded from the Apple store, go to security in preferences and allow other software to work.. this is limitation of trade methinks. You can set back later if you like.
Now drag the AirPortUtility56.pkg file over to unpkg.. and it will create a new directory of the same name on the desktop.. in finder, open the new directory, drill down.. applications, utilities .. there lo and behold is Airport utility 5.6 .. drag it to your main utilities directory or just run it from current location.
You cannot uninstall version 6 (now 6.3 if you updated) so don't try.. and you cannot or should not run them both at the same time.. although I have had no problems when doing so.
For screen shots see this post.
https://discussions.apple.com/thread/4668746?tstart=0

HT201335 I want to watch an iTunes rental video on my MacBook Pro but stream the sound to my Airport Express linked speakers. However re Airplay icon doesn't show up in iTunes when playing the rental video. Is there a way around that?

I want to watch an iTunes rental video on my MacBook Pro but AirPlay the audio to my AirPort Express linked speakers. However the AirPlay icon isn't available when arching the rental video in iTunes. Is there another way? Do I need to but an AppleTV? I don't own a TV, hence why I want to watch on my MacBook Pro.

Welcome to the Apple Community.
With or without an Apple TV you can't send video to one device and audio to another using AirPlay.

Can I use airport express without connecting to a router?

I hate trailing a long wire across my room just to listen to music through my (old but still fantastic) stereo system. I share a house with friends and our router is in the living room.. does the airport express need the router to work? sorry if this is a dumb question, there just doesn't seem to be an answer anywhere!

You do not need the AirPort Express to connect to a router in order to stream iTunes. In its default mode, the AX provides a standalone wireless network. You would just need to connect to this network to stream. The drawback, of course, is if your are getting your Internet access via another wireless network, you would have to switch networks to perform either.

About My New Apple Airport Express 802.11n Wi-Fi Router

Yesterday on Saturday after i finshed work I Went out & Bought a New Apple Airport Express 802.11n Wi-Fi Router for My Apple iMac Computer & for My Apple iPhone 5 & Apple TV & I Set it up & everything & everything worked out well so i had a question about it, that Green Solid New Light on Apple Airport Express is it suppose to always stay on even if my Apple iMac Computer is Sleeping like other Wi-Fi Routers??? cause i'm wondering cause it looks Very Nice & White & Shiny & New & i don't really want it to Fail on me cause i do like it & it does not take up a lot of space witch is a good thing so just had to ask???
how many years will My Apple Airport Express Wi-Fi Router will last for since it's as Big an an Apple TV, just was wondering if this thing is really strong & stuff to like hold out for years time maybe???
will My Apple Airport Express Wi-Fi Router Software ever get Outdated like my other Wi-Fi Router??? & they stopped making that Belkin Wireless n Router that i had & they stopped Updating it's Software & then The Software became not usable at all so I Had to go out & buy an Apple Airport Express 802.11n Wi-Fi Router.

Hi Byron,
on the first question: take a look at your manual; I have a different router, and on it the light stays on all the time, but I don't know if the Airport works the same way. On mine, it simply means that it is on and ready in case you need it. You should worry when there is no light, LOL.
Second question: with electronics, can't tell at all how long they will be good for. They are made to be compatible with a certain range of devices and software - and will be updated for a while when those devices and softwares are updated. After a while, too many new routers are available with too many new features that are compatible with new devices and softwares, so it's not worth updating the old ones. It's a question of money - they don't want to give you free updates forever, they want you to buy a new piece of equipment.
Third: yes, it will at some point. Everything technology/electronics related is outdated - some very quickly: you buy a new one and the next week you see an ad for a "new, improved" one. Same principle: they want you to buy again.

Problème de connection Airport Express avec réseau wifi

Bonjour,
J'essaie de connecter mon airport express à mon réseau wifi numéricable.
Petite spécificité de celui-ci: lorsque je veux me connecter à mon réseau avec un nouvel ordinateur.iphone... je dois saisir le nom du réseau car il ne me le propose pas de lui-même dans la liste des réseaux disponibles.
J'effectue donc le paramétrage normal (j'ai quand même du inscrire moi-même mon nom de réseau car il ne me le proposait pas) mais au moment du redémarage de mon airport après la programmation de celle-ci, j'ai un message d'erreur disant que ma borne n'arrive pas à déceler le réseau wifi, à quoi est ce du selon vous?
Merci de votre aide.
Louis

Bonjour,
Air port capsule revient au voyant lumineux orange après 3 ou 4 jours de fonctionnement au vert. Je le débranche et il fonctionne à nouveau pendant 3 ou 4 jours. Que se oasse-t-il?
Avez-vous reçu des réponses qui me permettraient de résoudre mon problème?
Merci
René Blouin

HT1731 How does one configure a NEW (unconfigured) AirPort Express to join a WiFi network that has a non-broadcasted SSID?

The following KB article assumes that the user has a configured AirPort Express:
http://support.apple.com/kb/HT1731
I reset my AirPort Express, because the SSID of the WiFi network changed and its name is not broadcast for security reasons.
When using the "AirPort Utility" ( not the "AirPort Admin Utility" – which is the wrong name of the application in the article! ) the application found the unconfigured AirPort Express, connected to the LAN via ethernet; However, when selected, the configuration "wizard" assumes that the user wants to configure the AirPort Express as a WiFi base station.
I selected the option to have the AirPort Express join a WiFi network; However, the AirPort Utility sent back an error, saying that a "Base station" ( WiFi network?! ) could not be found. Well, guess what? That's because the SSID of the network I want the AirPort Express to join.
UGH!
...and the best part is that there is no other solution, but to run with the AirPort Utility's assumptions, configure the AirPort Express as a WiFi Base station, then follow the KB article's instructions ( which are not accurate ) to re-configure the AirPort Express as a WiFi client.
This is a really bad user experience, Apple.
Please try following your own instructions to see how fantastically they fail..then, re-write your KB articles.
Thanks,
PS — If anyone knows of any easier methodologies, do tell. (That's the "question" part of this inquiry )
PPS — My Mac Pro, which I used to configure the AirPort Express, does not have WiFi.
PPPS — Why do all the articles that match searches for "AirPort Express" return articles that refer to "AirPort Base Stations"?! Please, for the love of UX, be consistent!

Here are the basic steps:
Run the AirPort Utility
Select the AirPort Express
Click on Manual Setup
Click on the AirPort icon
Click on the Wireless tab
For Wireless Mode, select the "Join a wireless network" option
In the Wireless Network Name field, enter the SSID of the hidden wireless network you want the Express to join.
Select the approrpriate wireless security type in the Wireless Security window.
Enter the appropriate wireless security password for the hidden network.
Click on Update.

Activate AirPort Express via D-Link DI-634M WiFi router to iMac Leopard

I installed an AirPort Express last year via Windows and a "g" WiFi router. Worked, but sporadically. Upgraded to MiMo router (using WPA-PSK) for better range and security, but AirPort Express stopped working.
This month, converted from Windows to iMac (OS-X 10.0) and trying to get AirPort Express working, but Setup Guide is useless, and my system doesn't "see" the AirPort.
Any help will be much appreciated.
Gib

Yes. You can directly connect an 802.11n AirPort Express Base Station (AXn) using an Ethernet cable. The AXn would then just need to be configured as a bridge to allow the D-Link to continue to provide both NAT & DHCP services for all network clients connected to either router.
In this configuration, the AXn would broadcast a wireless network for your wireless network clients to connect to.

How do I setup Airport Express to extend my CISCO router's wifi range?

Hi,
I am using CISCO EA4500 router for internet connection via wifi. I have Airport Express with me, which I want to use as extender of the wifi network. I setup the Airport Express as "Extend the wireless network", provided same base station name (CISCO), network name (JKS) and passwords.
However, I am not able to get it to work. Its gives me error saying network: unknown.
I have just 1 BHK flat, and even then the range is not enough to reach from my DR to BR. I tried using Airport Express as the base station as well. But the problem is again the range.
Help me please.
Jayesh

Can I do it other way around? I mean setup Airport as Base station and use Cisco to extend the wireless network?
I doubt that the Cisco router would be able to to wirelessly extend the AirPort network, since Apple uses proprietary settings that are designed to work with other Apple routers.
Also, when I am trying to use just Airport, I am not able to connect multiple devices at the same time
Sorry, but I don't know whether you have the AirPort connected to the Cisco router using an Ethernet cable....or.....whether you are saying that you have the AirPort connected directly to your modem using an Ethernet cable.
If the AirPort is connected directly to your modem.....what is the make and model number of this device?
Since you know that the Cisco router is working OK when you have it connected to your modem, things would be much simpler if you connect the AirPort to the Cisco router using an Ethernet cable. Can you do this?

AirPort Express not seen by wifi devices, but router wired devices OK

Hi,
I purchased an AirPort Express yesterday, upgraded the firmware to 7.6.1, connected to my Netgear DG834G router as a wireless client ("Join an existing network"), plugged into stereo and iTunes on my MacPro had no problems using AirPlay.
Today I tried using the AirPort Utility on my iPad and my wife's MacBook (as well as iTunes), but neither of them can see the AX via WiFi. But my MacPro is wired into the router and can see it OK. Likewise if I connect the MacBook to the router it can see the AX fine.
On a more technical note the wired devices can ping the AX, but WiFi devices can't. I find that pretty strange as they're all on the same subnet.
I've tried several resets and reconfigs (even from the MacBook), but once the AX is set to talk to the router then the WiFi devices can't see it. And throughout all this the (wired) MacPro can use AirPlay with no problems.
Has anyone got any ideas on what's going on, I'm a bit stumped! Thanks in advance.
Cheers,
Jay

Problem solved. For some stupid reason I had switched on a setting on the Netgear called "Wireless Isolation", and you can probably guess what that does...
So it's all working now!

AirPort Express link to Belkin Router

This has probably been answered before somewhere, but anyway here goes...
I have a PC. It does NOT have a wireless card.
I bought a Belkin wireless Router
It is connected via an ethernet cable to the PC.
I want to use an AirPort express as a client to allow me to play music from iTunes in other places in the house.
I have not been able to get the AirPort Express to connect as a client.
I have been on the phone to Belkin for 1 hour. They appear unable to help me.
Anyone in this forum able to shed some light on how to do this? I have entered the MAC address of the AirPort express in the Router set-up and tried diabling the my firewall, but still nothing.
Please help me!
Compaq Windows XP

Ensure that the PC is connected to the LAN port of the Belkin router and not the WAN port.
Is the Belkin router using WEP?
One of the problems with WEP is that the actual standard relies on a 10 character HEX key for 40bit WEP and a 26 character HEX key for 128bit WEP.
In order to make things easier for people, vendors use certain algorithms to convert simple alphanumeric passwords (or passphrases) into HEX keys, thus enabling people to use simple memorable WEP password rather than lengthy HEX keys.
The problem is that different vendors use different algorithms to generate the HEX key and therefore a ASCII password on an AEBS will be hashed differently on a Netgear client and vice versa.
One thing is a 13 character 128 bit WEP password will be hashed by all vendors in the same way (if you use 40bit WEP then a 5 character password is required).
Though sometimes not even that works and the HEX key must be used regardless.
AirPort: Joining an encrypted wireless network
http://docs.info.apple.com/article.html?artnum=106424
Choosing a password for networks that use Wired Equivalent Privacy (WEP)
http://docs.info.apple.com/article.html?artnum=108058
I wouldn't worry about using MAC Address access control as this will just confuse the issue and doesn't in fact add any security.
iFelix

Airport Express becomes inaccessible (apart from routing WiFi)

My configuration: an Airport Extreme (7.4.2), providing WiFi access, with a 1TB USB disk attached for Time Machine backup. MacBook Air and Mac Mini clients, both via WiFi, both running Time Machine. There is also an Airport Express (7.4.2) extending the WiFi network.
This setup runs perfectly for days at a time, and will then unexpectedly fail. When it fails, WiFi is still handled correctly, with new clients being able to attach, and full access through to my cable modem. However I can no longer connect to the USB HD, either through Finder or via Time Machine. If I run Airport Utility, it will discover the Airport Express, but if I click "Manual Setup" it will take ages (rarely less than 5 minutes) to retrieve the device configuration. I've not established an upper bound on the delay....
Power cycling the Airport Extreme seems to work, but I'm not thrilled with that approach. (How do you fsck a remote disk?)
Any suggestions?

* correction, I was pinging 10.0.1.1
Any help is appreciated.
EDIT: And of course, right as I post this, it starts crapping out again. Pings start timing out. Ping responses go to 3000ms. It takes 60+ seconds for the Apple Discussions page to even load!!! Really! Come on Apple.............!!!!!!!!!!!!!!!!

Airport express extend range of wifi

How do I extend the wifi signal in my house with the 2nd gen Airport Express? I have a non-Apple router (Orange) and an old Mac Mini. Thanks in advance. Sang

hello
i want to buy the TP LINKhttp://www.amazon.com/gp/product/B00E98O7GC/ref=ox_sc_act_title_4?ie=UTF8&psc=1& smid=ATVPDKIKX0DER
and i have a question
i have no longe the normal router. i have the Apple Airport Express ( and I am going to buy another airport express to even more get a better wifi range)
my question is. how can i set the TP link with the airpot express?
regards

Airport Express linked to a WIFI router Reconfiguring

Similar Messages

Maybe you are looking for