AirPort Express Network Running Slow

I am running an AirPort Express network in my dorm room with my MacBook Pro. Things were going well, but as of late, it seems like it is slllloooowwwwing down. I cant even get through a 30 second iTunes clip without the "Network Stall"ing at least twice. Webpages take a while to load and that new iPod tutorial video, yea, had to go to class and come back before the SMALL one was ready to play straight through.
I have reset the airport express, renewed the DHCP lease... I think I have to clear out something like the DNS or whatever... any ideas!?

More than likely you are experiencing RF interference. Try changing the channel used by the AirPort Express (AX) until you find a channel which works better or you run out of channels.
KB 58543, AirPort: Potential sources of interference

Similar Messages

Airport Extreme Killed My Airport Express Network!!!

I have been an apple user since 1992 - NEVER HAVE I FELT SO FRUSTRATED!!!! Sorry to shout, but this is as bad as it gets - my kids are screaming at me and my wife laughing!! I have had a reasonably good Airport Express network running in my house with an Express as the primary and internet connected to it by the ethernet port. I worked fine for my Intel iMac and my daughters Intel MacBook, but my son had problems in his room. We then got an xbox 360 and wanted to connect that so I upgraded to an Airport Extreme - Disaster!. Firstly the net went intermittant! Then I rebuilt from scratch restting all devices to factory defaults; worse and worse, the network kept failing to find various base stations. Finally I cut the Extreme out of the loop and tried to rebuild the original network; now Airport utility won't see any base station after I configue it!! Please help if you can!!!

If nothing works, try a factory reset: disconnect the Extreme from power, press the reset button, plug in power while still pressing the reset button, release reset button after 5 seconds or so.
This method usually helps me with problems with my Airport Extreme and Express (this happens seldom by the way). The only disadvantage is that you have to set it up again completely.

How do you add an Airport Express to an existing Airport Express network

how do you add an Airport Express to an existing Airport Express network

I assume that you are interested in using the new Express to extend the wireless range of the other.
If so, please check out the following Apple Support article.

Airport Express network suddenly no longer visible - but only for one Mac..

What the..?
My 20" iMac Core Duo can no longer see my Airport Express network. It happened yesterday after restarting the AE a few times.. (I do this and also restart the modem from time to time if the net connection stalls - or I want to boot of my housemate's PC from the network cause she's hogging bandwidth)..
Anyway.. The first restart caused it to not re-appear on the list of available networks, so I restarted again.. then it was fine - it came back. All good.
I reset it again this morning because the net connection was not meeting my expectation and now the iMac no longer sees the AE network.
I can connect to other Wi-Fi networks around me (there is a neighbour with no WEP) but cant see hide nor hair of my own network.
The puzzling thing is that my girlfriend's Mac Book, my other iBook G3 and my housemate's PC can all see it and use the network fine - as normal..
So what has happenned? And what do I need to do?
Between you and me ..This intel iMac has been a bit tempramental ever since I got it.. weird things like this happen to it from time to time.. never one thing that you can point at and say AHA! Faulty [something] but just weird stuff like this... Hmmmm..
Some help would be much appreciated.. Thanks!
20" iMac Core Duo 2.0GHZ Mac OS X (10.4.7) 2GB RAM, 500GB HDD, 256MB Graphics

Well, from reading some other posts, and trying my own experimenting, I have gotten it to work.
Deleting the keychain did nothing, manually connecting to the network by typing the name in etc.. nothing.
What DID work was using my G3 iBook (which could see the network) to use the Airport Administrator to change the channel from Automatic to manual - in this case channel 7 (a completely arbitrary choice).
The thing I cannot work out is why it had this issue in the first place. It worked fine for months then one day decided that it apparently didn't like automatic channel selection.
The problem is solved but the cause is still a mystery.
Hopefully though, this might help others with the same problem.
20" iMac Core Duo 2.0GHZ Mac OS X (10.4.7) 2GB RAM, 500GB HDD, 256MB Graphics

Macbook no longer detects Airport Express Network

I've been using my macbook to connect to my Airport express base station for my home wireless daily for like a year now. Today however, my macbook refuses to connect to the network. After a few scans it detects the network, then when I try to connect it brings up the "this network requires a WEP password" which I put in, and then the connection times out on every attempt.
I tried using the Airport Utility which fails to even detect the base station.
Yes I've restarted my MB, yes I've restarted the express/modem. Thing is, I'm connected to the same network right now on my iPhone which doesn't seem to have any problem.

Update: my macbook can connect to the wireless network at my university, but still not the airport express network.

Connecting Wireless Samsung BluRay Disc to Airport Express Network

I am trying to connect my wireless capable Samsung BuRay Disc Player to my Airport Express Network. The Samsung keeps telling me to check my IP Address, DNS Server, Gateway etc. I have tried to set it up using the auto option and using the manual option. Neither is working. How do I check that my IP address, etc. is correct for connection??

kalh wrote:
I am trying to connect my wireless capable Samsung BuRay Disc Player to my Airport Express Network. The Samsung keeps telling me to check my IP Address, DNS Server, Gateway etc. I have tried to set it up using the auto option and using the manual option. Neither is working. How do I check that my IP address, etc. is correct for connection??
Welcome to Apple's discussion groups.
I looked at a manual for a Samsung Bluray Disc player. They seem to have left out an important capability: the ability to choose a wireless network and supply its password.
You may be able to use the WPS (Wi-Fi Protected Setup) capability, although that is said to be tricky between Apple and non-Apple equipment. Use AirPort Utility to put your AirPort Express into "manual setup" mode. Invoke the menu option Base Station -> Add Wireless Clients. Then follow the player's instructions for "PBC (WPS)". Use the AirPort Utility option "First attempt". The AirPort Express' status light will turn blue while it waits for a connection from the player.
I have no direct experience with this. All the above information came from the electronic book "Take Control of Your 802.11n AirPort Network" (http://www.takecontrolbooks.com/airport-n).
I have no relationship with Take Control Books other than that of a customer.

How many people can simultaneously share airport express network?

How many people can simultaneously share airport express network? I want to set up a wireless network in my classroom and need to accommodate about 25 devices.

The AirPort Express will only handle 10 wireless connections.
You will need to consider an AirPort Extreme....which will handle up to 50 wireless connections.

Using my Actiontec modem's wifi, it doesn't find my new airport express. When I use the new airport express network I created error message says ip address is wrong. Help setting this new airport express up

Using my Actiontec modem's wifi, it doesn't find my new airport express. Using the new airport express network I just set up it says the ip address is invalid. What can I do to overcome this blinking amber light and error messages?

You need to begin by configuring the AEX to Join an existing network (Bridge Mode.) You can then connect to it using Wi-Fi, but the AEX will not extend your existing network.
If you can connect the AEX to your existing router using Ethernet, then you could use it to Create a new network. Otherwise, if you want to extend your existing network you will need to get a Wireless Access Point - WAP - from a non-Apple product like D-Link.

How can I share my Internet from my iPhone to Airport express network?

How can I share my Internet from my iPhone to Airport express network?

YES you can! - Gotta love those "you can't" answers from people who haven't even tried. ;o)
Just have your Airport Express "Join" your iPhone. It will share your Internet connection through its Ethernet port. I currently have an AppleTV connected via Ethernet to the Airport Express. With this setup I have wireless Ethernet AND wired LAN connection. I can even AirPlay to the AppleTV and have Internet at the same time. Haven't tried a switch/hub but see no reason why it wouldn't work. This proves to be very useful to create a wired network with Internet from a cellular device without Ethernet.

My computer is recognizing my airport express network at first but then slips to an exclamation mark. I have followed the steps to reset everything and it ends up keeping me on a loop of asking me to rest everything after I do so. network is recognized

My computer is recognizing my airport express network at first but then slips to an exclamation mark. I have followed the steps to reset everything and it ends up keeping me on a loop of asking me to rest everything after I do so. network is recognized on list along with all my neighbors. Any help would be greatly apprectiated.

System Preferences > Network
WiFi/Airport should be at the top of the list.
Select WiFi/Airport
[√ ] Ask to Join new Networks
click ( Advanced )
In the WiFi/Airport pane, remove ALL other networks except your home Network. (This will keep your computer from "wandering off" onto a neighbor's Network.)
You are not done until you close the windows and Save Changes.

Time Capsule and Airport Express network extension

Hello,
I have a time capsule using 5GZ network. However i have an issue, as in my bed room the signal is too weak.
I also get an airport express and would like to use it in order to make the signal reach my bed room.
Would you please tell me how i could do so ?
I checked WDS but this option is not available for my time capsule.
Thanks for your reply.

Hello both,
thanks for you reply.
Actually Tesserax, it's what i did from my Time Capsule + Airport Express.
However in my room i cannot get enought signal and only see the Time Capsule wifi network.
Is this normal or shall the airport express network appears differently ?
Thanks for your reply,
Pierre

HT5211 My HP 2355 won't show up in AirPrint? I have it plugged in via USB and set it up on my Mac mini with the airport express network. Any advice?

My HP 2355 won't show up in AirPrint? I have it plugged in via USB and set it up on my Mac mini with the airport express network. Any advice?

Unless your HP printer is an AirPrint-ready device, just connecting it to the USB port of the AirPort Express base station will not make it so.
On the other hand, connecting a non-AirPrint printer to the base station's USB port it can be shared out by the base station's print server. Please see the following Apple Support article for details.

WRT54G as client for Airport Express Network?

I know this can be done in reverse, with the airport express becoming a client for the WRT54G, but I want the 54G to connect to the airport express network I've already set up. Is there a way, and how?
Thanks!

It is not possible to set up a Linksys WRT54G as a client on a wireless network created by an Airport Express.
Others have noted here (in past discussions) that they have also been unsuccessful at configuring the WRT54G as a remote base station in a wireless distribution system (WDS) where the Airport Express is the main base station.

Airport Express as very slow in "extend wireless network" mode

Hi!
I am using a Airport Extreme (fourth generation) as a wireless router and a Airport Express 802.11n in "extend wireless network" mode.
I've set the Airport Extreme mode to 802.11n only - and all devices connect to the Airport Extreme as 802.11n Clients properly.
But as soon as they connect to the Airport Express, they only work in 802.11b/g mode (although they are capable of n)
and the connection is very slow - around 1Mb/s:
http://imageshack.us/photo/my-images/804/bildschirmfoto20111211u.png/
Can i force the Airport Express station to accept only "n" connections to speed up my file tranfers?
Thanks for any help!
matt

Where is the AirPort Express located in relation to the area that needs more wireless coverage?
Ideally, it would be at a point that is about half the distance between the AirPort Extreme and the area that needs more wireless coverage....and....there would be no obstructions like walls and/or ceilings in the signal path....tough to do in most homes, so do the best that you can.
Avoid placing the Express down low on the wall and use an extension cord to get it up as high as possible with a free look into the room.
The Express will normally "extend" what it receives, but you could try the following to see if it helps:
Temporarily, change the Wireless Mode setting on the AirPort Express to "Create a wireless network" and change the Radio Mode to "802.11n only".
(You may have to hold down the option key on your Mac while you click on the Radio Mode selection box to see the "802.11n only" choice). Then change the Wireless Mode back to "Extend a wireless network" and Update.

Do I need 2 airport expresses to run a network and airtunes at the same time?

Meaning, if I set up the network in my office with the airport express, I need another one plugged into the stereo for air tunes right? unless I want to unplug it and move it back and forth right?

If the stereo and the Internet modem are not in the same room, then "yes," you will need another AirPort Express in order to do both simultaneously.

AirPort Express Network Running Slow

Similar Messages

Maybe you are looking for