Airport Express. No airtunes when there is an internet connection.

Hello guys,
Now I have my very own airport express problem. I will try to go into as much detail as possible.
I own Airport express for about a month. It worked fine. Moved to the new apparent recently.
I have HP Pavillion notebook. While without the internet in the new appartment i set up my AE to stream music to stereo in a bridge mode. It worked fine.
Now my inet is on.
I connected AE to modem via ethernet cable, set it in a bridge mode. After a while i got the wireless internet connection on my PC. When the PC is connected to the internet i cannot connect to the AE or get the Airtunes working.
While reading the forums i've found out that i can change TCP/IP on PC to 164.192. and that will help me to connect to AE. I did, but at the same time the inet was gone.
Summary: i have a working wi-fi internet connection while AE is in the bridge mode connected via ethernet to the modem, but have no airtunes. If i set my PC's IP to 164.192. i can get airtunes but no internet. Need to get this together.
*The things i've tried already*: used AirPort Utility to set AE to "distribute IP", via DHCP. After that i rebooted my modem, AE and PC. PC and AE got IPs like 10.1.0. but no internet connection. Tech support of ISP said that it sees my PC, but PC has no IP on the net. While in this mode i also get the trouble connecting PC wirelessly to the AE and have to use hard reset to default settings for AE.
Much the same result i get when trying to "share one IP via DHCP".
Notes: PC's IP is set automatically. PC has internet connection via ethernet cable plugged directly into modem. Usual PC's IP is something like 77.122.
As far as i understand the problem is with IPs.
Please help me out. Thaks alot in advance.

Ok, please try the following:
o Power-down the modem, AX, and computer(s). Order is not critical.
o While all of the network equipment is powered down, perform a "factory default" reset on the AX. When complete, power-down the AX.
o Power-up the modem; wait at least 10-15 minutes.
o Power-up the AX; wait at least 5-10 minutes.
o Power-up the computer(s).
Your computer should now be able to access the Internet through the AX. Please post back your results.

Similar Messages

I want to listen to my music through my airport express but I also have a wireless internet connection!

I want to listen to my music through my airport express but I also have a wireless internet connection!
I think I might have been sold a jelly - I want to listen to my music wirelessly which is why I bought the Airport Express, but I also have a wireless internet connection - can I do both?

David1854 wrote:
I want to listen to my music through my airport express but I also have a wireless internet connection!
I think I might have been sold a jelly - I want to listen to my music wirelessly which is why I bought the Airport Express, but I also have a wireless internet connection - can I do both?
Do you mean to say you already have a wireless network setup and thought by buying the Airport Express you just could use it for wireless music alone?
The Airport Express is chiefly a wireless router first, with the wireless music and printing as extra's.
It can be used for streaming music alone, but I think it needs to talk to network time servers and thus it gets screwed up over time not being on the internet. Also by your using your computers wifi for music streaming, no internet with your other router.
So it's a all Airport Express or back to a stereo mini cable.

How do I set up iPad with airport express to stream music to stereo without internet connection?

how do i set up iPad and airport express to stream music to stereo without using internet connection.

Your 4th gen iPad does have the necessary software to connect to the AirPort Express but not to administer it. To do the later, you would need to install the AirPort Utility applet.
You said that your iPad can "see" the AirPort's wireless network, but can't connect. What happens exactly when you attempt to do so? Do any of your other wireless devices have any trouble connecting to the Express? Did you configure the Express for a closed network ... that is, not to broadcast its Network Name?

How can I prevent Firefox from starting in Offline Mode when there is no internet connection?

Hey!
When I fire up my laptop from standby it takes some time before the wireless internet connection is established. If i am too quick and open Firefox before that happens, it automatically goes into Offline Mode, which I hate a lot.
Is there any way to disable this behaviour?
I have already tried everything mentioned here: [http://superuser.com/questions/208146/can-firefoxs-offline-mode-be-disabled http://superuser.com/questions/208146/can-firefoxs-offline-mode-be-disabled]
Also I found this addon, which unfortunately does not work with Firefox 11: [https://addons.mozilla.org/de/firefox/addon/disable-automatic-offline-mana/ https://addons.mozilla.org/de/firefox/addon/disable-automatic-offline-mana/]

That shouldn't happen in Firefox 4 or later. You should just get a page not found or server not found message.
Can you check the following setting?
(1) In a new tab, type or paste '''about:config''' in the address bar and press Enter. Click the button promising to be careful.
(2) In the filter box, type or paste '''offline''' and pause while the list is filtered
(3) Look for '''network.manage-offline-status''' and reset it to False (either double-click or right-click/reset).
Does that work?

Voice control does not kick in place of SIRI when there is no internet connection

i have an iPhone 4s. i mainly use WIFI at both home and work. and am quite happy with SIRI. but when i leave home for work or am on my way back home after work quite often i press and hold the volume button to give voice command to call my wife. but SIRI does not work!
well, because SIRI needs internet connection and i dont bother using mobile internet (cause then i will need to turn on 3G which drains my battery like nothing on earth) it can not work.
but why does not my ordinary voice control kick in? since 4S is such a great gadget and is so smart in every way (apart from the pictures taken with the volume button could not be turned to adjust orientation in windows!) i was expecting this would be a normal thing to expect from it.
anyways, hope someday they would fix this.

I'm assuming you can either use Siri or Voice Control, but not both. I think if you turn Siri on the activation used to use Siri is removed from Voice Control and vice versa. This is just my own theory. Maybe a future software update might allow this.

What happens when there's no internet connection?

The only reference I can find to this is here
http://forums.adobe.com/message/4539999#4539999
But the thread is old and appears to have been shut down with no answer to the fundamental question.
Bottom line is that there are a 1000 valid reasons you may not have a connection and a 100 reasons that situation may not change for weeks.
So what happens, does CC just shut down?
Rob

Hi Rob,
I copied this from the Creative Cloud FAQ - http://www.adobe.com/products/creativecloud/faq.html
Do I need ongoing Internet access to use my Adobe® Creative Cloud™ desktop applications?
No. Your Creative Cloud desktop applications (such as Adobe® Photoshop® and Illustrator®) are installed directly on your computer, so you won't need an ongoing Internet connection to use them on a daily basis.
An Internet connection is required the first time you install and license your desktop apps, but you can use the apps in offline mode with a valid software license. The desktop apps will attempt to validate your software licenses every 30 days.
For annual members, you can use the apps for up to 99 days in offline mode. Month-to-month members can use the software for up to 30 days in offline mode.
So after 30 days it will attempt to connect, and give you a notification if it is unable to do but the software will continue to work.
Hope that helps,
-Dave

ERROR: 'Sky Go unable to load program information as there is no Internet connection'

I was using Sky Go via my iPad and a T-Mobile hot spot generator (Hauwei) to watch programs whilst in my caravan in Devon. Suddenly it stopped working and I now whenever I try and use Sky Go I get the message 'Sky Go unable to load program information as there is no Internet connection'. Obviously I am connected. I have tried reinstalling Sky Go and have completely rebooted the iPad but to no effect. Why has it suddenly stopped working???
Having returned home I have tried to connect again when the ipad is connected via my BTHomeHub2 but I still get the same message, I have also tried to use BBC iPlayer and I am getting the same error message. What has happened????

nikhildhoot wrote:
When the router has an internet connection, the phones automatically connect to the router flawlessly. When there is no internet connection, we get a notification saying "Wi-Fi Connection Limited"
The limited WiFi Connection issue when there is a good internet connection, is a known issue in the OS releases in the past six months, and has been corrected as far as I can tell on the most recent 10.2.1.3xxx or higher OS.
But, I would note that when your router has no internet connection, you should expect to get that notification... no internet connection > limited wifi connection.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Set up airport express to airtunes & internet when ISP connect using PPPoE

Hi,
I got the following problem: I connect to the internet using airport extreme and the ISP use PPPoE protocol. Now I'm trying to set up my airport express to airtunes my music but the admin utility doesn't see it and it doesn't see the airport extreme as well. Internet connection works fine but cannot play music. any idea what I'm doing wrong? It seems that I have to change the settings to DHCP to make sure airport admin can see the two base stations but if I do so, internet doesn't work anymore.
thanks for your help
Stefano

Hi all,
I have again the same problem but cannot find the answer I found a month ago anymore. anyone can help with a tip and point me in the right direction?
thanks
Stefano

Airport Express with Airtunes help!

I'm new to the wireless world so my question is why would I get the blinking yellow light on my Airport Express with Airtunes even when I'm within 5 feet of my G4 that has a airport card installed (802.11B). I also tried putting it in the living room which is one floor down and got the same thing.
I updated the firmware for the Airport Express with Airtunes but have not updated the airport card in the G4 because I'm unsure at the apple download site which software to download.
System profiler reports the airport card is 9.52 firmware version.
So is this what I update to: http://docs.info.apple.com/article.html?artnum=120097
The music is only cutting out from time to time but I would still like to see a green light on the Airport Express, its odd that it blinks yellow stating that I have a weak connection.
I'm not sure updating the firmware will help the weak signal, I used the airport utility to setup the Airtunes, but maybe there is a different way to configure the network to make it stronger, like I said I'm totally new to this stuff.
Thanks in advance for any help.
Roger
2002 Quicksilver G4
1.47GHz GigaDesigns Single Processor
OS X 10.3.9
1.5 GB SDRAM
ATI Radeon 9800
Pioneer 107 DVD-RW
Logitech MX518 Gaming Mouse
Klipsch ProMedia 2.1 Speakers
G4 Quicksilver 2002 Mac OS X (10.3.9)
G4 Quicksilver 2002 Mac OS X (10.3.9)

The blinking light doesn't indicate a weak wireless signal, it indicates that you do not have an internet connection established.
Are you using the AE for music streaming without an internet connection?
Haven't tried this myself, but it might eliminate the blinking light:
1. Open Airport Admin Utility and double click your AE to open the configuration.
2. Select the Internet tab.
3. Set to configure manually and enter:
IP address: 192.168.1.2
Subnet Mask: 255.255.255.0
Router Address 192.168.1.1
DNS servers 192.168.1.1
If this doesn't work, there probably isn't much you can do except establish a good connection to another router to get the light to turn green. The above numbers shouldn't be terribly important either since you are just trying to get the Airport to think it has an established connection.

Can I use Airport Express's Airtunes with a non-Apple modem/router?

I am about to set up a network in our second home, so I am trying to do it as economically as possible. I will have a Verizon modem/router. The Verizon rep says the Verizon equipment is all I need for a computer network (no Airport Extreme Base Station needed). But I would also like to play music on Internet radio stations through iTunes on my Cambridge Soundworks system in a room that is different from the one where the Verizon modem/router will be. Can I purchase an Airport Express with Airtunes to plug in near the music system without also getting an Airport Extreme Base Station to which the Airport Express would be linked? If it is possible to go with just the AE, is it foolish to avoid getting the base station if I would also like to have wireless printing on my network? (I believe I would need the Airport Extreme Base Station for printing because it has the USB port.)

The Airport Express will do what you want in addition to printing if your printer is compatible as it does have a USB port. Just configure the Express to "join" the wireless network that the Verizon router is creating.
You will be able to stream AirTunes to the AirPort Express, which in turn will furnish an audio signal to your stereo system.
If you want to be able to stream any audio source from your computer to the AirPort Express...not just iTunes audio sources...you might want to take a look at Airfoil.

Iphone, Ipod Touch - Send tunes to Airport Express with Airtunes

Does anyone know if they plan to update the iphone firmware with the ability to send your itunes music straight to your airport express with airtunes bass station. It really seems like a no brainer to me that this be added!

No one here knows if Apple has any plans to include this option with a future update, but this would drain the iPhone's battery in a very short period of time.

Apple AirPort Express with Airtunes and Netgear WPN824v2 Router

I'm having some trouble getting the AirPort Express with Airtunes to connect to a Netgear WPN824v2 network.
Details:
- Router: Netgear RangeMax Wireless Router WPN824v2
- Wireless Network Security: WEP
- Computer: MacBook Pro
- OS: OS X 10.4.10
- AirPort card in computer: this works fine - no problems
- AirPort Express with Airtunes: the setup routine goes OK, but then the unit cannot connect to the wireless network; the light blinks amber.
Could the problem relate to the password (Hex versus ASCII) or perhaps WEP versus WPA?
Any / all suggestions welcome. Thanks.

sonicdubster, Welcome to the discussion area!
Are you following the directions in KB 302153, AirPort Express: How to join an existing wireless network in client mode?
Is the AirPort Express (AX) placed in an area where it can receive a good wireless signal from the Netgear?
Does the AX connect if you disable wireless encryption?
WPA (or WPA2) is much more secure and less troublesome than WEP. If all of your equipment supports WPA, I would switch to WPA.

Connecting Airport Express via Ethernet to Time Capsule - Lose Internet

I have a number of Airport Express units throughout my house that are all connected to speakers. There are 2 Airport Expresses that I want to hardwire (via eithernet) as they are too far away and I tend to get audio dropouts. I wired the one with no problem. When I plugged the other in - my internet went out completely. I confirmed its not an internet or provider issue - its something to do with the Time Capsule. I will check my Airport Utility and it will show everything out. When I unplug the second airport, reset the time capsule - all goes back to normal.
Any ideas on what the issue is? How I can fix? I need to hardwire this second airport to avoid the audio drops. Thanks in advance.

your best connection is going to be wired, hands down, so long as you have a Cat5e or Cat6 spec'd cable.
now the N is pretty fast, but if you have the original version TC, running in N only mode will be the best option because running in multi-mode actually slows the N speed down, not making it worth the upgrade to N.
If you have one of the "Dual Band" models then the issue mentioned above doesn't apply.

I was downloading some songs when I lost my internet connection. There is no sign that these songs reached my iTunes but i have been charged for these songs anyway. What should I do?

I was downloading some songs when I lost my internet connection. There is no sign that these songs reached my iTunes but i have been charged for these songs anyway. What should I do?

It's possible that the message you got was to update the AirPort Express Base Station's (AX) firmware...and that something might have gone wrong during the upgrade.
Let's start by performing a "factory default" reset on the AX to get it back to it's original "out-of-the-box" condition.
Then, let's set it up to work with your cable modem...
AirPort Express Base Station Setup (AX) w/High-Speed Cable Modem
Modem/Router Power ReCycling (optional)
- Power-off the Cable modem, AX, & computer(s). (Wait at least 30 minutes. If possible, leave the modem off overnight.)
- Power-on the Cable modem; Wait at least 30 minutes.
- Power-on the AX; Wait at least 5 minutes.
- Power-on the computer(s)
Setup the AX
With the network components powered down, set up the AX, using the AirPort Admin Utility, either connect to the AX's wireless network or connect your computer directly (using an Ethernet cable) to the Ethernet port of the AX, and then, try these settings:
AirPort tab
- Base Station Name: <whatever you wish or use the default>
- AirPort Network Name: <whatever you wish or use the default>
- Create a closed network (unchecked)
- Wireless Security: Not enabled
- Channel: Automatic
- Mode: 802.11b/g Compatible
Internet tab
- Connect Using: Ethernet
- Configure: Using DHCP
- WAN Ethernet Port: Automatic
Network tab
- Distribute IP addresses (checked)
- Share a single IP address (using DHCP & NAT) (enabled)
Do not, at this point, set up any security (i.e., WEP/WPA encryption, closed network, etc.) to first make sure the AX is operating properly. Try to access the Internet wirelessly with your MacBook. If you're successful, go ahead and add any security features you wish.

After the Airport update today, Airport Utility no longer sees my new Extreme or my 2 new Airport Express relay stations (same network); however, my internet is working and all Airports are green?

After the Airport update today, Airport Utility 6.0 no longer sees my new Extreme or my 2 new Airport Express relay stations (same network); however, my internet is working and all Airports are green? I'm running Lion on my iMac and updated when Airport Utility prompted me to do so a few hours ago. After applying the updates is when Airport Utility stopped seeing my routers. But they are working? Thoughts?

Did you remember to completely power cycle the entire network?
You would want to do this after any update or change to the network.
If you did not do this yet......things are out of sequence.
Power off everything on the network.....all devices.....power down order is not important
Wait a few minutes
Start the modem first and let it run a minute or two by itself
Start the next device connected to the modem the same way
Work your way out on the network starting each device about a minute apart
Check the network

Airport Express. No airtunes when there is an internet connection.

Similar Messages

Maybe you are looking for