Airport Express no longer recognized by my network.

I added an Airport Express (in another room) to my functioning home WiFi (Air. Extreme) as attempt to increase signal elsewhere in my home. My computer did add it to the network for months but now does not recognize the Air. Express. Airport utility shows its image and says that it was previously part of the network and Should it be forgotten?
I have repeatedly unplugged the Express, tried to press on a reset hole (?) on the back etc. It just blinks yellow. The iMac in that room is on the network so the signal is getting there.
I am just trying to increase signal for my kids and grandkids when they visit with their MacBooks.
Any ideas?

Please check the model number on the bottom of the AirPort Extreme and post back with that info.
Which version of the AirPort Express do you have?
The "new" AirPort Express looks like a miniature version of your AirPort Extreme.
If your AirPort Express is the older version that plugs directly into an AC socket, check the Model No on the side of the Express and post back with that information.
In the meanime, you can click to "Forget" the AirPort Express in AirPort Utility.
As far as resetting the AirPort Express....with the Express powered up for a few minutes, hold in the reset button on the Express and watch for the amber light to start blinking more quickly. Keep holding the reset button in for another 5-6 seconds when you see it blinking it more quickly and then release.
The Express should now restart and stay solid amber for about 30-40 seconds, then begin to blink amber about once a second.
Please confirm that you have been able to accomplish this "Hard Reset".

Similar Messages

Airport express no longer recognized within my home network

Home wifi no longer recognizes my Airport Express which I used to tether itunes to stereo. Any suggestions or is it broken or too old? How do I tell?

Please check the model number on the bottom of the AirPort Extreme and post back with that info.
Which version of the AirPort Express do you have?
The "new" AirPort Express looks like a miniature version of your AirPort Extreme.
If your AirPort Express is the older version that plugs directly into an AC socket, check the Model No on the side of the Express and post back with that information.
In the meanime, you can click to "Forget" the AirPort Express in AirPort Utility.
As far as resetting the AirPort Express....with the Express powered up for a few minutes, hold in the reset button on the Express and watch for the amber light to start blinking more quickly. Keep holding the reset button in for another 5-6 seconds when you see it blinking it more quickly and then release.
The Express should now restart and stay solid amber for about 30-40 seconds, then begin to blink amber about once a second.
Please confirm that you have been able to accomplish this "Hard Reset".

Airport express no longer recognized by macs, but still seen by iOS

Hello,
I have two airport expresses that I've been using just for streaming audio to two stereo amplifiers. They were working fine a week ago, both with Lion and with Snow Leopard. I have five macs in the house right now, running either of those OS versions. All have suddenly refused to recognize my two airport expresses. I can't find them using Airport Utility 5.6.1, which I think was recently provided by software update, so I downloaded an earlier version and it doesn't see them, either.
I have made a few changes recently, but none in the last week when the problem has started. A couple of weeks ago I went to a Vizio wireless router, because the airport express that I had been using for my wifi internet had begun to drop its connection. About 10 days ago I downgraded back to Snow Leopard because my white macbook was not performing well with Lion. But after doing so, the airport expresses were working fine in conjunction with the new router. Another computer running Snow leopard also refuses to recognize either Airport express, and there's been nothing done with that except to upgrade Airport Utility to 5.6.1. The macs in the house running Lion have Airport Utility 6.0, and they can't find the airport expresses either.
I have tried rebooting computers, and unplugging/reconnecting the airport expresses.
So you might think the problem lies with the Airport Expresses, but why would they both fail at the same time? And to add to the mystery, I find that my iOS 5.1.1 devices, including an ipad 2 and an iphone, both can recognize either of the AEs.
Thanks in advance!

Ok, found a solution. the wireless router sets up two networks, one at 5 ghz and the other at 2.4 ghz. I had been connected to the 5 ghz network. When I switched over to the 2.4 ghz connection, the Airport expresses became visible again. So, I guess the airport card sets its speed to receive the wifi network and as long as it's using that, can't communicate at a different rate for other devices?

Airport Express no longer recognized

I've had my Airport Express a good many years to stream music wirelessly and it's worked very well. Now I'm wondering if it's reached its end of life. I use it exclusively to stream music wirelessly from iTunes on my MacBook Pro and my Windows 7 desktop. The situation is that the AX is plugged into my stereo system and the green light is on, but neither computer can find the AX - it's as if it's not there. I unplug the AX to reset it and the yellow light flashes for a few minutes then goes to green. For a brief amount of time, the AX shows up on the computers, and I can ping it successfully. Then it disappears again but the light on the AX stays green. I attached the AX directly to the router via an ethernet cable and reconfigured the device but the same thing happened.
My router is a Belkin N+
So am I missing something obvious or is time to say adios to the AX? If the latter, what are my best options to wirelessly stream music from computer to stereo?
Thanks for any help.

I had the same Issue. My Internet connection was working, but slow. Amber flashing light on the airport Express. Airport Utility was not recognizing the airport express.
In my case, after updating my mac software, the airport firmware was out of date.
Here what I did to solve it.
1) Connect to another wireless network if possible, or directly to your modem via ethernet.
2) As Above, unplug the airport express, plug it back in after 30 sec.
3) Airport Utility should now recognize the express. if your firmware is out of date as mine was (mine had never been updated) it will inform you in airport utility.
4) Click download firmware update within airport utility. (As #1 I had to join another network for this, but you could also plug directly into your modem)
5) Software, installs, express reboots. order is restored.
now i'm back up to great surfing speeds.
Hope it helps.

Airport Express No Longer Recognized in Airport Utility

I have an Airport Extreme (version 7.3.2) that I is connected to my cable modem and a pc in my basement. I have an iMac in a separate room on my second floor that accesses the internet wirelessly via the Airport Extreme. I also have an airport express that I used throughout the summer to play airtunes through speakers that I set up in other parts of my home. The airport utility (that is set up on my iMac) always picked up the Airport express and the window in the lower right corner of iTunes allowed me to pick the speakers so that I could play my music on the connected speakers.
All of a sudden - and without any warning - when I tried to connect my airport express last week, all I got was the blinking amber light on it; the airport express is no longer recognized in my airport utility. I have tried to reset the express, but it doesn't work. Furthermore, the option to play airtunes no longer appears in the lower right corner of iTunes. All I have now is a blinking amber light on the Express.
Can anyone suggest ways in which I can correct this problem and resume playing airtunes? I am not the most technically advanced person, so please try to make any suggestions in simple terms! Thanks!

Just an update to yesterday. I managed to get the DVD out of the superdrive by shaking it out while ejecting. I put the old HD back in and still no dice with regards to making it show up in Disk Utility. While opened up, everything seemed to be in order with nothing burnt or smelling burnt. All connections seem to be in place. I guess it's off to the repair shop for the laptop.

My airport express no longer works with my network

The airport utility does not recognize my airport express. It was suggested to download Airport utility 5.6.1 but that is no longer compatible with my OS X 10.7.4. Even my iphone sees it but then crashes when it trys to do something with it.

It's an easy mistake to make, but AirPort Utility 5.6.1 will only run on Snow Leopard and Leopard machines.
If you want to use the previous version of AirPort Utility, you need to download and install AirPort Utility 5.6 for Mac OS X Lion
It might be a good idea to perform a Factory Default Reset on the Express and then start over to reconfigure the device. To do this....
Power off the Express for a few minutes
Hold in the reset button first and keep holding it in for an additional 9-10 seconds as you simultaneously plug the Express back in to power
Release the reset button after the hold period and allow it 45 seconds or so to restart to a slow, blinking amber light
The Express provides a default wireless network with a name like Apple Network xxxxxx. Make sure that your computer is logged on to this network first....no password is required.....then open AirPort Utility and it will have a good chance to recognize the Express.

Airport Express no longer joins network

Greetings, I have a cable modem internet connection; I use an older Airport Extreme (802.11n, without Time Capsule) to make a local wifi network with WPA2 Personal security, and an older Airport Express (802.11 b/g, firmware 6.3) to connect a laser printer in a different room.
All was working well until two days ago when access to the internet disappeared. I reset the modem, confirmed that the cable connection was working by plugging a laptop directly into the modem by ethernet, determining that the problem was the Airport Extreme. I discovered the 7.5.2 firmware update which I uploaded, and all seemed well.
However, the 27" iMac upstairs only connected to Airport intermittently; it appeared to have been duplicated in name, as well as only recognized the Airport Express. I've since been able to correct that problem, however, now the Airport Express no longer connects to the Airport Extreme network.
I've tried soft resets (unplugging then plugging back in) and hard resets (pressing the reset button with a paperclip until the amber light flashes, then reconfiguring the device). I've tried setting the Airport Express both just to join the network (printer sharing) as well as extend the network; I also reverted the Airport Extreme's firmware to 7.4.2 which works perfectly well. However, now after each successive attempt to reconfigure the Airport Express to join the network, Airport Utility says that the Airport Express has been successfully updated and will restart, which it never does - it simply flashes an amber light, and Airport Utility eventually times out and says that it was unable to find the Airport Express after restarting, noting that the settings have been successfully updated, but that there is a problem re-joining the wireless network/finding the device. Notably, the Airport Express no longer appears in the left hand list of wireless devices in Airport Utility.
Help!!

Hi pslebow,
You make it sound like there was no change, then suddenly the Airport Express 802.11g lost connection to the wireless network and you can't get it back.
What network security is your wireless network using?
From the specification sheet, "…When joining an existing wireless network, AirPort Express only supports WPA-Personal."
AirPort Express - Technical Specifications
Please make sure your router security is set to match.
iOS and OS X: Recommended settings for Wi-Fi routers and access points - Apple Support
If you have older Wi-Fi devices on your network that don't support WPA2 Personal (AES), a good second choice is WPA/WPA2 Mode (often referred to as WPA Mixed Mode). This mode will allow newer devices to use the stronger WPA2 AES encryption, while still allowing older devices to connect with older WPA TKIP-level encryption. If your Wi-Fi router doesn't support WPA/WPA2 Mode, WPA Personal (TKIP) mode is the next best choice.
Best,
Nubz

My airport express no longer shows up in Airport Utility since I got a new router.

Hi all, I'm scratching my head at this one.
For years I've had an Airport Express and it has worked fine. I was using it simply to stream music from iTunes on my PC as well as my iPhone and iPad to my home theater which is in a different room. I had a Linksys WRT150N wireless router, and the Airport Express would join my existing network and stream music via Airplay.
A few days ago I replaced my Linksys router with a Netgear WNDR3800, and the Airport Express no longer connected. I assumed I had to set it up again, but it is not even recognized by Airport Utility, so I can't get to the setup screen. I tried performing a soft reset, hard reset, and attaching the Airport Express to one of my Netgear's LAN ports via Ethernet cable, but it still won't show up in Airport Utility. The amber light just flashes on the unit and I can't access any setup screens.
Am I missing something obvious? All of the help tips assume the Airport Express at least shows up in Airport Utility. In my Airport Utility there is nothing to select and it says "AirPort Utility was unable to find any AirPort wireless devices. Make sure the AirPort wireless device you want to set up is plugged in and in range of your computer, and then click rescan to try again."
I am running a PC with Windows 7 and using Airport Utility v. 5.6.1 for Windows.
Thanks for any help!
-Rob

Did you try temporarily connecting an Ethernet cable from your PC to the AirPort Express to see if AirPort Utillty could "see" the AirPort Express that way? This method will work virtually all of the time unless the Windows Firewall or the PC's anti-virus program is blocking the connection attempt from your PC to the AirPort Express.
If you want to configure the Express using wireless only, you need to remember that when you reset the Expess back to default settings, it is now producing a wireless network with a name like Apple Network xxxxxx.
You must log on to the Apple Network xxxxxx wireless network first....no password is required.....and then open AirPort Utility so that your PC will establish a connection to the AirPort Express.
Once the AirPort Express has been configured to join your Netgear wireless network, you can log back on to your normal wireless network and all devices will be working with one another.

Can I use airport express to create a local wireless network that my apple tv can connect to for AirPlay/mirroring in student halls/dorm without Internet connection

Hi I was wondering :
Would I be able to make a local wireless network using airport express that my apple tv can connect to which in turn is connected to a projector with hdmi in so that I can mirror/AirPlay from iPhone pad and mac

will the Airport Express allow you to log onto a hotel wireless network, and broadcast a secure wireless network in your room for your wireless devices, like the Ipad, Iphone, etc.?
The bottom line with a single AirPort Express is no.
The AirPort Express can only "extend" a wireless network when the network is being provided by another Apple router.
As you might imagine, it is extremely unlikely that that the hotel network....which no doubt uses professional wireless access points provided by a manufacturer of commercial systems.....would be compatible with an AirPort Express.
In many years of travel domestically and internationally, I cannot recall a time when a single AirPort Express would "extend" the signal provided by a hotel's wireless network.
However, if you had two AirPort Express devices handy, you might be able to configure one to "join" the hotel network and provide an Ethernet signal to the second AirPort Express, which would be configured to "create" your own "private" wireless network.

I changed my wireless router and ever since my airport express isn't recognized by itunes, but it is from my iphone. I have ready many blogs and eventally get it to work, for a day. The very next day, doesn't work. Takes hours to fix.

Xfinity sent me a new wireless modem/router and ever since i have had issues with my airport express. It started with music cutting in and our. After an evening on the computer i fixed that. Now the airport express is always recognized by my iphones, but now my itunes on my PC. last night i spend three hours playing with it and thought fixed it, however, 24 hours later, it doesn't work from the PC. Itunes doesn't see it. Can anyone help.... Its driving me nuts!!!

We had the same problem, but figure out the solution.
You MUST have at least 1 song added to your ITUNE! After you add a free song, then everything else should work as normal!
Hope this helps!

I cant find my Airport Express any longer under Wi Fi in my iPhone but it works in ipad and my imac?

I cant find my Airport Express any longer under Wi Fi in my iPhone but it works in ipad and my imac?
I also get a message that I cant listen to music from itunes in my speakers in the other room that have been worked before?

I have fixed it so wi fi working in my iphone by doing my Airport Express to Zero by a nail in the little whole...but still has problem to get out my music from my iMac from ituens to my speakers in my other room that was working before...

Airport Express connecting to an existing wired network

Hello,
I'm trying to connect an Airport Express unit to an existing wired network, can someone please help me to set this up or what I need to do? I originally connected the ethernet cable from the device (airport express) to the switch it was on but it didn't work and the other computers were connecting to that network. Should I setup the Airport Express in Bridge Mode or will i need to fiddle around with the settings a bit?
Any help would be greatly appreciated.
Regards,
Daniel

Not sure what the difficulty is here.
All you really need to do is connect the Express to the switch with an Ethernet connection, open AirPort Utility on your Windows machine, and click Continue to get the process going.
If you need to download and install AirPort Utility for the PC, it is here:
AirPort Utility 5.6.1 for Windows
Select the "Create a wireless network" option, assign a device name and password to the Express, then assign a wireless network name and password for the wireless network that you want the Express to provide.
Select the Bridge Mode option when it appears and click Update to save the settings.
The Express will restart and you should have a green light on the Express.
Then, log on to that wireless network from the iPad.

How many airport express can I add to my network for the purpose of using the airport express to send audio signal to different rooms in the house? I'm interested I'm running about six different zones.

How many airport express can I add to my network for the purpose of using the airport express to send audio signal to different rooms in the house? I'm interested I'm running about six different zones.
What I'm looking to do is to have self powered in ceiling speakers in every room in my house with out having to run wires to every room to carry the audio signal. I would like to use the airport express to do the job of carting the audio signal.
Here's my set up now I have an airport extreme and one airport express that I use to carry audio to one room.

FWIW. I have used up to four AirPort Express Base Stations (AX) for streaming sucessfully in pretty much the way you have described. I didn't have a need to try more so I can't attest that more would or would not work.

HT4259 Airport Express that were part of another network

I have two Airport Expresses that were part of another network and I am now trying to configure them on a new network to wirelessly extend it, but can not discover them on the AirPort Utility and I factory reset them as well and still they are not being discovered. They plugged in only about 4-6 feet away from the base station (Airport Extreme). What should I do?

If you are using Lion 10.7.4 as your profile indicates.....
Open AirPort Utility and look at the rectangular box in the upper left hand corner of the AirPort Utility window.
It should read Other AirPort Base Stations (1) if you have reset the Express correctly.
Click on Other AirPort Base Stations (1), then click on the the AirPort Express xxxxxxx
AirPort Utility will take a minute to analyze your network, then announce that the Express will be configured to Extend your wireless network
Edit the name of the AirPort Express device if you wish, then click Next
Allow a minute or two for AirPort Utility to configure the Express
When you see the message that Setup is compete, click Done
Configure the second AirPort Express the same way.

Using the AirPort Express to Join an existing Wireless Network

Hello,
I am hoping you can provide me with some help on this... I recelty acquired a PowerMac G4 with a 450 MHz processor, CD-RW/DVD-ROM drive, Zip Drive, 1 GB RAM, and two 40 GB HD... The system has OS 10.4 installed, and it is has built-in Ethernet...
I was told I could use the Airport Express to connect to an existing wireless network, so I purchased an Airport Express base Station... Thing is, to e honest, I am having a bit of a problem getting started...
- First, to connect from the AirPort Express to my G4, do I need a special kind of Ethernet cable, or will the usual kind do?
- Second do I need to istall the software first, or have the Airport express connected to the G4 before I do?
How would I go about setting this up, step-by-step?
Any information would be appreciated...
Thanks for your time...

OK, thanks. Hopefully, the Netgear is creating a wireless network using WPA/WPA2 security. That will make it much easier for the AirPort Express (AX) to join the wireless network. It can join networks with using WEP security, but password issues almost always arise using WEP.
Since you must enter the exact security settings and password for the wireless network, it would help tremendously to know this in advance. Otherwise, it's going to be a series of "trial and errors" and likely frustration, later on.
When you have a moment, check the security settings on the Netgear router.
It might be one of the following: WPA2 Personal, WPA/WPA2 Personal, WEP 128, WEP 40.

Airport Express no longer recognized by my network.

Similar Messages

Maybe you are looking for