Airport Express - No Sound with Airplay

I'm at my witts end
Set Up:
Very Simple - Airport Express connected to comcast modem.
No problem with wi-fi connection to internet.
Problem Statement:
No sound out of speakers using Airplay.
Facts:
1) In iTunes I can select my speakers (connected to Airport Express).
2) When I select my speakers, the music will stop playing from my device, but no sound comes out of the speakers themselves.
3) No sound when plugging in ear buds to the airport express.
4) Speakers work when plugged into the device.
5) All software/firmware is up to date.
Misc Questions:
1) I have tried nearly every configuration I can think of in the airport utility...and I simply get nothing. Are there certain settings necessary?
2) Is IvP6 a signficant factor?
3) Is it possible my audio jack on the airport express is malfunctioning?
4) Is there anyway to test it?
I've exhausted the threads on this issue, so any fresh feedback would be appreciated.
Thanks for your time.
C

1) I have tried nearly every configuration I can think of in the airport utility...and I simply get nothing. Are there certain settings necessary?
None that I can think of. It appears that you have everything configured properly.
2) Is IvP6 a signficant factor?
I only found IPv6 to be an issue when used in conjuction with Bonjour on Windows-based PCs. On Macs I found that it doesn't matter if this networking protocol is enabled or not ... as far as AirPlay is concerned.
3) Is it possible my audio jack on the airport express is malfunctioning?
Yes, or the audio circuitry, specifically the DAC built-in the Express. When substituting a pair of stereo headphones (or earbuds) you are only testing the analog audio output of this port.
4) Is there anyway to test it?
You've already tested the analog part of the audio port. To test the digital side, you would need to connect a optical digital connector/cable to the port. One simple test is to verify that the other end of the optical cable has a bright light appearing from it. Better still, connect it to an audio receiver that has the appropriate optical digital audio input port to verify that sound is present.

Similar Messages

Airport express: no sound with iphone but works with ipad and mac

Hello,
I have a problem with my airport express. With my iphone (5, ios8) i can connect to it but there is no sound when i play something. However, when i connect to it with my mac (mini, 10.9.5) or ipad (ios8), everything is fine. I tried restarting of all the devices, including the router, but it does not help. There is no problem with the iphone; streaming to apple tv works fine. Does anyone know how to fix this, or what could be the problem?
Bastii

Bastii
Did you resolve this I have the same problem with all my mobile devices iphone 5, ipad mini and ipod touch 5th Gen all wuiing latest software. It also works fine with my PC and iTunes.
I have managed to get sound on the odd occasion for a few minutes but drops out, it also stops if I swap back to the mobile device and back to the airport express (this never works).

Can my first generation airport express be used with airplay using iOS 7.1.2? It stopped working after one of the big iOS updates.

I have a first generation Airport Express. Although it appears on the Airplay screen on my iPad and iPhone 5 (using iOS 7.1.2) the music does not play through the Airport Express. The Airport Express does function correctly when I stream music via iTunes from my desktop computer, so I know that the device is working. The Airport Express firmware version 7.6.4 is up to date.

Hello lorifromminn,
The article linked below details some useful troubleshooting steps and information that can help get AirPlay working on your iPad.
iOS: Troubleshooting AirPlay and AirPlay Mirroring
http://support.apple.com/kb/TS4215
Cheers,
Allen

Airplay won't connect to my Airport Express & is intermittent with Airport Utility

Hi
Yesterday, my iTunes 10 stopped connecting via Airplay to my Airport Express. It spent a long time displaying a Connecting message, then finally gave me this error message: "An unknown error (-15006) occurred while connecting to the AirPlay device AirPort Express”.
I have a Macbook Pro 2.5 Ghz Intel Core i5 (6 months old). 4 GB 1600 MHz DDR3.
Running OS X 10.7.5.
My main modem/router is a Livebox and I usually going my Airport Express to the Livebox network to play music.
My Airport Express is 802.11g
All my equipment is within a radius of 2 or 3 feet.
I'm aware of at least one other recent thread about this problem (https://discussions.apple.com/thread/4150757?tstart=0), but none of the solutions suggested have resolved my problem, so I have summarized a list of the actions I have so far taken to try and resolve the problem. Hopefully, this will help others sort this issue out for themselves.
ACTIONS TO SOLVE ISSUE
1. Ran Airport Utility 6.1, which was unable to find my AX.
2. Downloaded, installed & ran Airport Utility 5.6. AU 5.6 still couldn't find my AX, giving me this error message:
"AirPort Utility was unable to find any AirPort wireless devices. Make sure the AirPort wireless device you want to set up is plugged in and in range of your computer, and then click rescan to try again."
3. Unplugged the AX and did a hard reset. AU found my AX and I configured it to join my Livebox network. After being configured, the green light came on the AX, which also appeared on the AU list of devices. However, AU still had the message "Waiting for Airport Express to reset…" with a spinning ball for several minutes. So, I closed the AU window (as AU advised), and reopened it. Happily, the AX was still listed.
4. Reopened iTunes and tried to select my AX as speaker output. At that exact moment, the AX vanished from the AU list of devices and, after the long wait, iTunes gave me the same error message as before:
"An unknown error (-15006) occurred while connecting to the AirPlay device AirPort Express”.
When I tried to rescan for devices in AU, I got the same error message:
"AirPort Utility was unable to find any AirPort wireless devices. Make sure the AirPort wireless device you want to set up is plugged in and in range of your computer, and then click rescan to try again."
5. Hard reset and configuration of AX. This time I didn't close the AU window, I waited for the AX to reset. When the spinning ball finally vanished, I got this error message:
"An error occurred while reading the configuration. Make sure your Apple Wi-Fi base station is plugged in and in range of your computer or connected via Ethernet and try again. (-6753)"
6. Apple help pages suggested updating the AX firmware. I downloaded the firmware update, did the AX hard reset/configuration routine, then tried to run the firmware installer and got this error message:
"An error occurred while attempting to communicate with the AirPort Express. (-8)"
7. Ran all the software updates, including upgrading to iTunes 11.
8. Spent over 5 hours doing many many hard resets of the AX, combined with iTunes restarts, MBP restarts etc. Along the way, I discovered that if I hard reset & configured the AX, after a few minutes, AX would disappear from the AU device list without me doing anything.
9. Attempted to change IPv6 options, using following methods:
a. System Preferences -> Network -> Advanced -> TCP/IP -> IPv6 _> Link-local only
b. In Terminal.
networksetup -listallnetworkservices
networksetup -setv6off Wi-Fi
Neither method had any effect on the ability of AU to see my AX.
Phew! I'm now exhausted & rather demoralised. Anyone got any other ideas?

I have been dealing with this for days now. I'm not sure what the solution is either, I've spent most of my vacation from work attempting to get it to work with my speakers and printer, none work still!!
It seems like a lot of ppl are dealing with these errors but there isn't one solid solution out there.
Try to set the AX wirless setting to "off" and only have it work for Airplay, Does it work for you?
One last thing, could this be an update problem? As in, you update your firmware/software and it renders the AX obselte. My AX is old probably a little older than 4-5 years, what about your?
I would really like to get this to work as I do not think I need a new AX to make this work.
Let me know your thoughts.
B.

I'm using iTunes 9 and I recently just bought AirPort Express. I have used it before in the past put the problem I have now is that I cannot select the Express network for my speakers. Does Airport Express only work with iTunes 10 or 11?

I'm using iTunes 9 and I recently just bought AirPort Express. I have used it before in the past put the problem I have now is that I cannot select the Express network for my speakers. Does Airport Express only work with iTunes 10 or 11?

Hello Hornet12,
Indeed, iTunes 10.2 or later will be required to utilize AirPlay.
Using AirPlay
http://support.apple.com/kb/HT4437
AirPlay requirements and capabilities
To get full AirPlay features, make sure your AirPlay-enabled devices are running the latest software updates. The table below identifies minimum AirPlay requirements and capabilities:
Stream content from
Requirement
Notes
iPad
iOS 4.3 or later.1
From the Videos, iPod, Photos, Music, and YouTube apps on iOS devices, stream videos, music, and photos to an Apple TV (2nd and 3rd generation), or stream music to an AirPort Express or compatible third-party device.
With iOS 4.3 and later, you can also stream video and audio from a website or a third-party app installed on your iOS device if the developer for the app or website has added AirPlay functionality.
iPhone (3GS or later)
iPod touch
(2nd generation or later)
Computer
iTunes 10.2 or later.
Stream videos and music from your iTunes library to an Apple TV (2nd and 3rd generation), or music to an AirPort Express or compatible third-party device.
Apple TV
Apple TV software version 5.1 or later.
Stream music from your Apple TV to another Apple TV (2nd and 3rd generation), to an AirPort Express or compatible third-party device.
Cheers,
Allen

HT4587 I downloaded Airport Express Utility 5.6 to get my Airport Express to work with the latest Mac OSX 10.7.4, but when I install and run it, it still says my Airport Express is out-of-date and needs the 5.6 utility.

I downloaded and installed Airport Express Utility 5.6 to get my old Airport Express to work with the latest Mac OSX 10.7.4, but when I install and run it, it still says my Airport Express is out-of-date and needs the 5.6 utility. What's up?

It is likely that you downloaded AirPort Utility 5.6.1. If you checked the requirements, this only runs on Leopard or Snow Leopard Macs.
You have Lion, so you need AirPort Utility 5.6 for Mac OS X Lion

Can't Get Airport Express To Work With ATT's Uverse

For years, AE worked just fine with my 2Wire portal streaming music to my stereo. Went to Uverse 2 months ago, and AE quit working. I am not using an Airport base station, just the Uverse modem and I need help getting it to work.
There is nothing in this forum when I search for uverse, so I post this in hope someone can help me.
I reset AE it and it finally appeared in Airport utility with a yellow light. I click configure and when I choose to join my current network, it sets up it's own Apple network, removing it from Airport utility and changing Airport status in Network to yellow.
No matter what I do or how I try, I just can't get AE to work with the stock 2Wire modem.
Has anyone been able to get AE to work with just the 2wire router & not have to buy an airport base station.
Any help is REALLY appreciated, as I wanna hear my Christmas music, and it's turning me into a Grinch!
Thanks!
Message was edited by: Chris Winkler1

+However, it asks for the security and all I see is WEP in the Home Network set up, I don't know if it's 40 or 128+
AT&T set this up, so only they can tell you for sure. My guess would be WEP 128 since this type of security is stronger than WEP 40.
+And it asks for a wireless password. I entered the one from the router & it did not work. Tried the Key and it did not work.+
This is the same wireless password that you would use if you were logging on to your wireless network with your computer. But, unless you first have the exact, correct security setting for your 2wire router, the password will not work.
+Has anyone out there successfully got their Airport Express to work with Uverse????+
I don't provide instructions to anyone on the forum unless I've first done it myself. I'm providing you with the same instructions that I used to help a neighbor with his 2wire Uverse setup last week. It works fine.
But, he called AT&T to ask them what security setting they used on his 2wire router. Otherwise, we would have had to try each possible setting to see if we could make it work.
AT&T also told him that his password should be 13 characters, all lower case letters with no spaces. That is what the neighbor said he used. I cannot confirm this as he did not share his password with me.
AT&T may have set up the password criteria differently on your router. You need to confirm with them on this.
+What password goes in the Base station tab, Key or Password?+
Any password you want. This is a separate password simply to be able to access the settings on the device in the future when you are using AirPort Utility. You could use your wireless network password if you want.
Please post back on your progress.

HT1515 How can I use Airport Express (1st generation) with OS X Mavricks?

How can I use Airport Express (1st Generation) with OS X Mavericks?

1st Generation AirPort Express will work fine with Mavericks.
Are you sure that you have a 1st Gen Express?
Check the model number on the side of the Express. 1st Gen is A1264.
If you see A1084 or A1088, these are much older versions of the Express that were sold long before Apple began to use the Generation naming with "n" wireless devices in 2007.
Mavericks will not support the A1084 or A1088. Use another Mac running Leopard, Snow Leopard, or a PC if you need to administer the older Express.

Airport express not working with apple products

We have been trying to get airport express to work with a macbook pro, ipad2, iphone, laptop, htc wildfire - havent even tried the air music or printer yet!
We have a green light on the airport express which is connected to an ntl cable modem(virgin media network).
Currently the only thing that will connecy is the laptop and my htc phone. All the apple products will not connect?
We went to the apple store today and it worked grand when it was plugged in - the apple products all worked.
The network comes up on ipad2 but when you press connect it says 'unable to connect'
can anyone help us please?
thank you

I have the same issue. Mine fixed itself for a bit and now it's broken again. I'm thinking it's going to be intermittently broken. I've tried turning both devices off and on again but that did not help.

HT1998 what is the latest update for Airport Express 802.11n with the Mac OSX10.6.8

what is the latest update for Airport Express 802.11n with Mac OSX 10.6.8?

You can find out as follows:
Open Macintosh HD > Applications > Utilities > AirPort Utility
Click the AirPort Express
Click Manual Setup
Click directly on the word Version (3rd line)
If there are any updates, you will be notified.
If there are not any updates, you have already have the latest firmware.

Apple AirPort Express Base Station with 802.11n - MB321LL/A. How to set it up to my new iMac

Community:
How do you set up an
Apple AirPort Express Base Station with 802.11n - MB321LL/A how do you set up on Mac running on OS X 10.9.4?
Please advise
Fmsalazar

Apple did say it was important.
If the units do not show up in the airport utility then you must set it correctly to link-local.
Steps for OS X Lion or Mountain Lion
This can happen if IPv6 has been disabled. To enable IPv6 for your network interface:
Choose Apple menu () > System Preferences, and then click Network.
If a lock icon appears in the lower-left corner, click it and enter your admin name and password to unlock the pane.
Click your network service (Wi-Fi or Ethernet) in the list, and then click Advanced.
Click the TCP/IP tab.
Choose Link-local only from the Configure IPv6 pop-up menu.
Click OK.
Click Apply.
AirPort base station not seen or "An unexpected error occurred" appears in AirPort Utility 6.3
Apple rep says the same.
Re: Unexpected error when connecting Airport Express A1264 to Airport Utility 6.3.1
I am searching as I saw it in a thread today where a person had issues. (No contribution from me in the thread but found that was the issue).
It is kind of a fail safe.. since auto can end up with any setting.. and it will depend on the setting of ipv6 in the Airport Router if it works properly in the computer.. setting it to the correct value is one step in sorting out problems when people get in a mess.

AirPort Express Base Station with AirTunes, is it worth it?

I am about to buy a MacBook and get a wireless capable printer and I'm wondering if it's worth buying the AirPort Express Base Station with AirTunes. Does it improve internet connectivity? I have a Cable modem will the Mac pick up the connection automatically?
thanks!

Hi liquid_garnet,
welcome to macbook forum.
First check your wirelesss printer that you want to buy, and make sure they have intel mac driver for it in the box or on their sites.
And check your cable modem, see if the modem is capable with wireless networking (usually if the box has antenna, it should be wifi capable), if it does, why bother to buy another wireless access point?
If you really need wireless access point, I suggest you consider a wireless router hub, so you can connect up to 4 computer wired and not to mention the wireless capability too, rather than airport express with iTunes that only can act as wireless access point and cannot act as a hub.
Good Luck.

I am currently using the Airport Express to work with a Bose Wave radio. 3.5 MM jack out and phono connectors into Bose. Is there a way to hook to a new Bose Wave which does not have phono input plugs?

I am currently using the Airport Express to work with a Bose Wave radio. 3.5 MM jack out of the Express and phono connectors into Bose. Is there a way to hook to a new Bose Wave which does not have phono input plugs?

The latest Bose Wave SoundTouch music system still uses a single 3.5 mm analog Aux port. You would connect the two using an analog audio cable with 3.5 mm stereo jacks on either end.
An example cable would be located here.

Will airport express be compatable with windows vista

will airport express be compatable with windows vista

vista will not be compatable because I do not have the capability in vista to download AirPort Utility 5.6.1 for Windows, which is a requirement for the ethernet connection to the Airport Express. Is that correct?
No, sorry for the confusion.
You would need 5.6.1 on the PC only if you intend to use that to initially setup and configure the Express. I understand that you will be using the Mac to setup the Express, correct?
5.6.1 is not needed if all the Vista machine will be doing is connecting using Ethernet or wireless to the network. You don't have to install anything on the Vista machine if all it will be doing is connecting to the Express.

Should airport express be configured with the same network as my existing router

Should airport express be configured with the same network name as my Verizon router.

Carolyn1962 wrote:
I am new to apple,used to windows.Apple store advised airport express in order to boost my DSL router.In order for it to be most effective should it be under the same settings.Still learning
A router signal can not be boosted as all routers put out the maximum allowed by law. However, proper placement of a secondary router will enable it to "repeat" or extend the signal.
An Airport can "extend" the WiFi created by another Airport. It can not extend a non-Apple WiFi. You need TWO Airport units, one to function as the main radio and the other to function as an extender. I used two Express units.
Configuration is simple if you start from a factory default condition. Connect the main Airport to AC power and finally to the Internet modem (or modem/router). Open Airport Utility on your Mac or other computer and accept all of the recommendations. After confirming that it works, insert your desired administrative and WiFi passwords.
Then connect the extender to AC power. As before, open Airport Utility on your Mac or other computer and accept all of the recommendations. No need to add password info.
Do not expect the Airport to respond instantly to the configuration commands. BE PATIENT!

Airport Express - No Sound with Airplay

Similar Messages

Maybe you are looking for