Airport express not allowing to expand range of my bigpond broadband
i connect my airport express open airport utility choose extend network range then clicked the network and a window says this network cannot be extended and my airport express is up to date.
Connect an Ethernet cable from one of the LAN <-> ports on your main router to the AirPort Express
Open up AirPort Utility and click Continue to follow the guided setup
You want to select the "Create a wireless network option" option when it is presented and then assign the same wireless netowrk name, same wireless security and same password that your main router is using to the AirPort Express as well.
Select the Bridge Mode option when it appears...if it is not already selected for you...and finish up the configuration by clicking Update to store the settings to the AirPort Express
Similar Messages
-
Airport express not allowing PC or xbox on to network with WEP password
Hi there
Ever since we switched from PC to Mac about 5 years ago our airport express (purchased 2007) has not allowed a PC or other gaming device on to it's network. I have two MacBooks at the moment which needed to be configured with slightly different IPv4 addresses in order to be on the network. That was about a year ago when we bought a new MB and I thought it strange when both computers would not connect and it was a bit of a drama lugging both computers to the store in order for the techs to manually fix the issue.
Now we have an international student living with us and it is very important that he is able to connect with his PC to our network. My son's DS and xbox is never allowed to connect to our network using the WEP password that we use for our Macs. It is a very frustrating situation now as I do not think that the Mac store can help us out since I asked for advice a while ago when trying to connect my son's gaming consoles and they said they could not help with non apple products. This is a little odd as I thought that Airport would connect all devices. Our internet provider cannot help us as it is NOT a modem issue.
I should also add that at least twice a day our Macbooks 'fall off' our network and we have to turn the airport off and on in order to reboot the connection. I also have an iphone and that connects to our network although occasionally it will ask me to rejoin and prompt me to enter the password which I do but it rejects it. I usually press cancel and for some reason it connects fine despite not accepting the password.
My question is this: Can I connect other devices to airport and if so, how? Or is our airport faulty and should I replace it? I really don't want to buy a new device if the same problem is still going to occur.
Thanks in advance for the help.bump
I'd love some feedback....anyone? -
just installed a new time capsule and i want to use my airport express to extend my wireless range....time capsule working with existing devices at this time...but i am not able to get airport utility to recognize the airport express.....????
Temporarily connecting your AirPort Express to one of the Time Capsule's Etherent LAN <-> ports...as LaPastenagure suggests....is always a good way to setup and configure other network devices.
If you want to configure the Express using wireless, remember that the Express broadcasts a default wireless signal with a name like Apple Network xxxxxx. You must log on to this network first....no password is required....then open AirPort Utility to "see" the AirPort Express. -
Can I run a cat5 cable to a 4 port hub from a cisco router then connect one of the hub's output ports to an airport express to 'extend' my wireless range?
Flow would be
Cable modem---->cisco e2000 wifi router (This is broadcasting wifi but not strong enough)---->4 port hub ---->airport express (to extend the wifi in another part of house)
thanks!Yes, you can do this as you stated. In essence you will want to configure both routers for roaming network. Please check out the following Apple Support article that describes this type of network. Although this article uses two or more AirPorts, it can be done with just about any manufacturer's router.
-
Airport Express Not Working with iMac G4 and HP laptop
Ok I am really frustrated with this. I had my Airport Express configured to my mac and my old roommate's mac fine. I moved and just tried setting it up with my mac and my new roommate's PC laptop. It did not work. I tried connecting a router to see if that would help. It still didn't work. I reset the airport's default settings and it still didn't work. Is there a connectivity issue between macs and pcs using the airport express that I don't know about? Am I missing something? Can anyone give me some suggestions of what to try next because I am seriously fed up and running out of ideas of how to alleviate this.
Could it have anything to do with a firewall on the pc or the fact that I'm going from a place that supplied me cable internet to a place that now has dsl?
Thanks for any help.
AaronMacs and PCs work together just fine with an Airport Express.
Unfortunately, you have given us little information to help you with beyond simply indicating that "it doesn't work". Please elaborate:
1. do the Mac and PC "see" the Airport Express wireless network?
2. if so, does the Airport Utility (or Airport Admin Utility) on either computer "see" the Airport Express and allow you to view/change its configuration?
3. what does the status light on the Airport Express show?
4. if you can connect to the Airport Express wireless network from the PC and/or Mac, is the only problem that you cannot access the internet?
5. what kind of reset did you do? To really start from scratch, do a factory default reset as described here. -
Apple airport express not recognised
I have a new iMac running on Yosemite and an old(ish) first gen apple airport express which allows me to stream itunes to my nice big speaker and that works great.
Also have an Apple TV, an iphone and an iPad and they all talk to each other fine.
Have bought another, second hand, first gen (model number A1088) apple airport express as I want to get another nice speaker for another room so I can have music streaming throughout the house.
However, when I plug this second apple airport express in all I get is a flashing amber light and it's not recognised on the airport utility on the mac or on my iphone.
When I disconnect my original apple airport express and leave the 2nd one still connected I "think" my Mac detects it but it says the Airport Utility does not work with this device.
Can anyone please help?
I have power cycled everything (inc modem/router) and no change.
ThanksBelieve it or not I have got it all working.
I ethernet connected the troublesome AE to my router, downloaded AU 5.6 and configured it to join my existing home wifi network.
Yes my iMac's and iPhone's AU won't allow me to change any settings but they both now see it.
If I want to make any changes I just use the AU 5.6 that I now have on my iMac. And any changes I want to make on the AE which I have been successfully using I just use the Yosemite AU.
All good. Now off to go shopping for a nice powered speaker. -
just did firm ware update on time capsule an now my airport express not connected do to air port utilities doesn't support base station ?
mickair wrote:
I have been experiencing some networking problems
Welcome to Apple's discussion groups.
I have the latest Time Capsule ("TC"), an old Airport Extreme Base Station ("AEBS") bought in 2007 and 2 Airport Expresses, one bought in 3 months ago ("AE-Alpha") and the other bought back in 2007 ("AE-Beta"). All of them have been updated with the latest firmware.
Based on those dates, the AirPort Extreme is probably flat (as opposed to dome-shaped), making it 802.11n-capable. The Newer AirPort Express is probably an 802.11n-capable model A1264, while the older one is probably a model A1084 or A1088.
I use {the TC's} DHCP function ... to avoid unauthorized use.
This a discussion for another thread, but that's not what DHCP is for.
The wireless setting for it is to participate as WDS Main, but after reading various posts, it seems WDS is a bad idea
With that older AirPort Express you're stuck with WDS unless you decide to replace it with a newer model.
The AEBS is currently setup as being a WDS Relay at the moment
Why a relay? That's only needed if there's another base station "beyond" it that is configured to depend on it.
Since the AEBS is connected to the TC via Ethernet, you should probably configure it as a "roaming network":
http://discussions.apple.com/thread.jspa?threadID=2273124
{The AE-Alpha} connects fine as WDS remote at the moment
I don't have any experience with mixed WDS and non-WDS networks, but since it's 802.11n-capable, you may be able to configure it to "extend" the network of the TC rather than as WDS. Look for a setting on the TC to "Allow this network to be extended".
Physical location:
AEBS in one end, TC and AE-Alpha in the middle while AE-Beta on the other end.
A device such as "AE-Beta" that's supposed to extend a network shouldn't be "at the end" but should be half way between the central base station and the clients that need an extended network. -
What is the range of an Airport Express 2nd generation? The range is better than the 1st generation?
150 feet in clear space with no obstructions in the signal path. It is not possible to predict range with any obstructions in the signal path.
-
How does one sync the new time capsule with the old airport extreme and airport express in order to extend range?
Thanks for the additional information.
Unfortunately, the AirPort Utility application in the Lion and Mountain Lion operating systems, which is used to configure the new Time Capsule does not support the older versions of the products that you have.
Even if it did, there are no settings on the older AirPorts to "Extend a wireless network", so they are not compatible with the new Time Capsule if you intend to extend the network only using wireless connections.
If you have the ability to connect each AirPort to the Time Capsule using a permanent wired Ethernet cable connection, it might be possible to use a complicated workaround to install an older version of AirPort Utility to configure the older AirPorts to work with the new Time Capsule.
If you have another Mac there that is using the Leopard or Snow Leoapard operating system, things would likely be simpler. I have not done this type of procedure to mix a new Time Capsule with older AirPorts, so I would not be able to say whether this would work or not. -
I have qualitynet either wired internet. I buy a card good for a month at a time, I can only log into one device at any one time. Are there settings I can adjust on my airport express to allow all my devices to connect to wi-fi without having to log out of one devise before using another?
Some Internet providers that limit access to a single device at a time do so by the device's hardware MAC address. If your ISP is one of those, you may be able to substitute the MAC address of your AirPort Express base station for the computer. I would suggest that you contact them to find out if this is allowable.
-
Help regarding Materialized view ( subquery expression not allowed here )
Hi all,
while creating materialized view i got following error
ORA- 22818
subquery expression not allowed here
following is my query
CREATE MATERIALIZED VIEW MV_NAV_REC
BUILD IMMEDIATE
REFRESH COMPLETE ON DEMAND
as
select folio_no FOLIONO,CHKDIGIT as Check_Digit,sch_code SCHEMECODE, sysdate as FOLIODATE ,
(select case when count(distinct SUBBROKERCODE) =1 then to_char(max(SUBBROKERCODE)) else 'Multiple Broker' end from transaction_st
where folio_no = tst.folio_no
group by folio_no) ARN_Number ,
(select sum(case when tran_type in ('PURCHASE','SWITCH IN') then UNITS else 0 - UNITS end ) from transaction_st
where folio_no = tst.folio_no AND SCH_CODE = tst.sch_code
group by folio_no,sch_code) NUM_UNITS_NEW ,
--SUM (case when tran_type NOT in ('REDEMPTION','SWITCH OUT') THEN UNITS ELSE 0 - UNITS END ) AS Num_Units,
(select sum(case when tran_type in ('PURCHASE','SWITCH IN') then AMOUNT else 0 - AMOUNT end ) from transaction_st
where folio_no = tst.folio_no AND SCH_CODE = tst.sch_code
group by folio_no,SCH_CODE) as NUM_AMOUNT_NEW ,
--SUM (case when tran_type NOT in ('REDEMPTION','SWITCH OUT') THEN AMOUNT ELSE 0 -AMOUNT END ) AS Scheme_Amount,
sum( CASE WHEN upper(tran_type) NOT in ('REDEMPTION','SWITCH OUT') THEN
units * (select nav_rs from nav_rec where nav_rec.sch_code = tst.sch_code and nav_rec."Date" = /*trunc(sysdate)*/to_date('23/03/2009','dd/mm/yyyy'))
ELSE (0 - units) * (select nav_rs from nav_rec where nav_rec.sch_code = tst.sch_code and nav_rec."Date" = /*trunc(sysdate)*/to_date('23/03/2009','dd/mm/yyyy')) END ) Scheme_Valuation ,
null as SCHEMEPHRASEID ,
null as "Prefered Mode of SOA",
( select sum( case when upper(tran_type) NOT in ('REDEMPTION','SWITCH OUT') THEN AMOUNT ELSE 0 - AMOUNT END ) from transaction_st t where t.folio_no = tst.folio_no group by folio_no ) as Folio_Amount,
select sum(CASE when upper(tran_type) NOT in ('REDEMPTION','SWITCH OUT') THEN
units * ( select nav_rs from nav_rec where nav_rec.sch_code = ts.sch_code and nav_rec."Date" = /*trunc(sysdate)*/to_date('23/03/2009','dd/mm/yyyy'))
ELSE
(0 - units) * ( select nav_rs from nav_rec where nav_rec.sch_code = ts.sch_code and nav_rec."Date" = /*trunc(sysdate)*/to_date('23/03/2009','dd/mm/yyyy')) END
) from transaction_st ts where ts.folio_no =tst.folio_no group by ts.folio_no
) as Folio_Valuation
from transaction_st tst
group by folio_no ,sch_code,CHKDIGIT
order by folio_no , SCH_CODE
please help meHi,
You cannot use scalar subqueries in a materialized view.
http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:4110947624538#22981269011674
edit
From 10g doc:
ORA-22818: subquery expressions not allowed here
Cause: An attempt was made to use a subquery expression where these are not supported.
Action: Rewrite the statement without the subquery expression.
(http://download.oracle.com/docs/cd/B19306_01/server.102/b14219/e19400.htm#sthref6020)
Edited by: hoek on Jun 10, 2009 7:56 AM -
Airport express not working since today's itunes update
Since updating iTunes today, Airport Express not working. More specifically, the Airport software will recognise the device exists, but iTunes cannot connect to it, just getting error message.
Ray Dio wrote:
Since updating iTunes today, Airport Express not working.
try this:
go system preferences > network > airport > advanced > TCP/IP and set *configure IPv6* to off. click on apply.
now have iTunes connect to the remote speaker again.
JGG -
ORA-22902 CURSOR expression not allowed Error Cause: CURSOR on a subquery..
Hi,
I found same issue in a metalink thread which is addressed in Oracle 12.1 which doesn't help me now. I need to rewrite the below query. Does anyone have any suggestions how to go about it?
thanks,
April
working in Oracle 11.2.0.3.1, windows server, doing an upgrade from 10g to 11g. Piece of code is failing with following error via TOAD
Oracle Database Error Code ORA-22902 Description :
CURSOR expression not allowed
Error Cause:
CURSOR on a subquery is allowed only in the top-level SELECT list of a query.
The below code is returning a tree of data for projects, units within the buildings.
Code as follows:
SELECT LEVEL
, p.project_id
|| NVL (p.file_ref, ' ')
|| '] ['
|| NVL (p.project_ref, ' ')
|| '] '
|| p.project_name
|| ' ( '
|| (SELECT COUNT (*)
FROM PROJECT p1
WHERE p1.parent_project_id = p.project_id)
|| ' sub-projects, '
|| (SELECT COUNT (*)
FROM PROJECT_ELEMENT pe2
WHERE pe2.project_id = p.project_id)
|| ' elements)' AS project_description
CURSOR
(SELECT pe.element_id
|| pe.element_ref
|| '] '
|| pe.element_name
|| ' ('
|| pe.unit_count
|| ')' AS element_description
CURSOR
(SELECT hu.hu_id
|| hu.hu_ref
|| '] '
|| CASE
WHEN hu.bedroom_count IS NOT NULL
THEN ', Bedrooms: ' || hu.bedroom_count
ELSE NULL
END
|| CASE
WHEN hu.bedspace_count IS NOT NULL
THEN ', Bedspaces: ' || hu.bedspace_count
ELSE NULL
END AS hu_descripton
FROM HOUSING_UNIT hu
WHERE hu.element_id = pe.element_id
ORDER BY hu.hu_ref
) AS housing_units
FROM PROJECT_ELEMENT pe
WHERE pe.project_id = p.project_id
ORDER BY pe.element_ref, pe.element_name
) elements
FROM PROJECT p
START WITH p.project_id = l_root_project_id
CONNECT BY PRIOR p.project_id = p.parent_project_id -- connect by used with LEVEL keyword
ORDER SIBLINGS BY p.file_ref DESC
, p.project_ref DESC
, p.project_name DESC;
Edited by: AprilM on Jul 17, 2012 10:28 AMInteresting. I am getting even worse results on 11.2.0.1.0:
SQL> select * from v$version
2 /
BANNER
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - Production
PL/SQL Release 11.2.0.1.0 - Production
CORE 11.2.0.1.0 Production
TNS for 32-bit Windows: Version 11.2.0.1.0 - Production
NLSRTL Version 11.2.0.1.0 - Production
SQL> select dname,cursor(select ename from emp e where e.deptno = d.deptno) from dept d
2 /
select dname,cursor(select ename from emp e where e.deptno = d.deptno) from dept d
ERROR at line 1:
ORA-00604: error occurred at recursive SQL level 1
ORA-00905: missing keyword
SQL> connect scott
Enter password: *****
Connected.
SQL> select * from v$version
2 /
BANNER
Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - Prod
PL/SQL Release 10.2.0.4.0 - Production
CORE 10.2.0.4.0 Production
TNS for 32-bit Windows: Version 10.2.0.4.0 - Production
NLSRTL Version 10.2.0.4.0 - Production
SQL> select dname,cursor(select ename from emp e where e.deptno = d.deptno) from dept d
2 /
DNAME CURSOR(SELECTENAMEFR
ACCOUNTING CURSOR STATEMENT : 2
CURSOR STATEMENT : 2
ENAME
CLARK
KING
MILLER
RESEARCH CURSOR STATEMENT : 2
CURSOR STATEMENT : 2
ENAME
SMITH
JONES
SCOTT
ADAMS
FORD
SALES CURSOR STATEMENT : 2
CURSOR STATEMENT : 2
ENAME
ALLEN
WARD
MARTIN
BLAKE
TURNER
JAMES
6 rows selected.
OPERATIONS CURSOR STATEMENT : 2
CURSOR STATEMENT : 2
no rows selected
SQL> And double CURSOR also works fine in 10g:
SQL> select cursor(select dname,cursor(select ename from emp e where e.deptno = d.deptno) from dept d) from dual
2 /
CURSOR(SELECTDNAME,C
CURSOR STATEMENT : 1
CURSOR STATEMENT : 1
DNAME CURSOR(SELECTENAMEFR
ACCOUNTING CURSOR STATEMENT : 2
CURSOR STATEMENT : 2
ENAME
CLARK
KING
MILLER
RESEARCH CURSOR STATEMENT : 2
CURSOR STATEMENT : 2
ENAME
SMITH
JONES
SCOTT
ADAMS
FORD
SALES CURSOR STATEMENT : 2
CURSOR STATEMENT : 2
ENAME
ALLEN
WARD
MARTIN
BLAKE
TURNER
JAMES
6 rows selected.
OPERATIONS CURSOR STATEMENT : 2
CURSOR STATEMENT : 2
no rows selectedSY.
Edited by: Solomon Yakobson on Jul 17, 2012 1:27 PM -
Materialized view ....subquery expression not allowed
Hi,
I have been assigned to create a materialized view using the following subquery.
When I executed it is giving error ora-22818:subquery expressions not allowed here. The same query is good for view but not MV.
Can anybody help me in writing MV for my query.
select rownum as ROWNUMBER,f.id Folder_ID, concatyear(f.id) year_name,
(select nvl(fr.requestor,fr.requested_by) from fts_folder_request fr where
fr.folder_id=f.id and fr.status=0 ) Pending_Requestor,
(select nvl(fr.requestor,fr.requested_by)
from fts_folder_request fr,fts_folder_checkout_history fch where
fr.folder_id=f.id and fch.folder_requested=fr.id and fch.return_date is null) CheckOut_To from fts_folder f;
Thanks in advance.Any help in creating MV for my query.It contains subquery expressions that have to be avoided in MV.
select rownum as ROWNUMBER,f.id Folder_ID, concatyear(f.id) year_name,
(select nvl(fr.requestor,fr.requested_by) from fts_folder_request fr where
fr.folder_id=f.id and fr.status=0 ) Pending_Requestor,
(select nvl(fr.requestor,fr.requested_by)
from fts_folder_request fr,fts_folder_checkout_history fch where
fr.folder_id=f.id and fch.folder_requested=fr.id and fch.return_date is null) CheckOut_To from fts_folder f;
Thanks.
Message was edited by:
user617694 -
Received ORA-22818 subquery expressions not allowed here when creating mate
Hello,
I was trying to create a materialized view to describe the referential integrity between the tables in my schema:
create materialized view user_references
tablespace tbspc
build immediate
using index
refresh complete on demand next sysdate + 1
as
select uic.table_name to_table, uic.column_name to_column,
ucc.table_name from_table, ucc.column_name from_column
from user_ind_columns uic, user_constraints uc, user_cons_columns ucc
where uic.index_name = uc.r_constraint_name
and uc.constraint_name = ucc.constraint_name
and uc.owner=upper('my_schema');
I was able to create this MV in Oracle 9.2. It failed with the following error when I ran it against Oracle 10.1:
from user_ind_columns uic, user_constraints uc, user_cons_columns ucc
ERROR at line 9:
ORA-22818: subquery expressions not allowed here
Is not allowing subqueries in MV a new restriction in Oracle 10? Is there a workaround?
ThanksHello
This may be a bug in your version as I can do it successfully on 10.2
tylerd@DEV2> create materialized view user_references
2 build immediate
3 using index
4 refresh complete on demand next sysdate + 1
5 as
6 select uic.table_name to_table, uic.column_name to_column,
7 ucc.table_name from_table, ucc.column_name from_column
8 from user_ind_columns uic, user_constraints uc, user_cons_columns ucc
9 where uic.index_name = uc.r_constraint_name
10 and uc.constraint_name = ucc.constraint_name
11 and uc.owner=upper('my_schema');
Materialized view created.
tylerd@DEV2> select * from v$version
2 /
BANNER
Oracle Database 10g Enterprise Edition Release 10.2.0.2.0 - Prod
PL/SQL Release 10.2.0.2.0 - Production
CORE 10.2.0.2.0 Production
TNS for 32-bit Windows: Version 10.2.0.2.0 - Production
NLSRTL Version 10.2.0.2.0 - Production
5 rows selected.HTH
David
Maybe you are looking for
-
I had a previous iPhone, my current iPhone and my iPad that are all connected to one cloud. Can I delete the backup from my previous iPhone? Will it delete in the cloud AND on the phone? or does it just delete from iCloud? or does it just delete from
-
Hi, I have a MacBook Pro Retina 15", connected to a Time Capsule. My iPhoto library is stored on an external HD, connected to the Time Capsule via USB. I want to sync my photos with my iPhone (iOS 7.1) The issue is that iTunes can't display anything
-
Connecting HP LaserJet P1102w printer to wireless network
I have been trying to connect my HP LaserJet P1102w printer to my wireless network for a couple days now. I put the disk in and follow the instructions. When I get to the part about plugging in the USB to the desktop computer and turning on the print
-
Adobe reader android browser plugin
Why does adobe reader not allow the mime type application/pdf in an object tag to work in a web page? Instead it wants to download the pdf instead of viewing it in the browser like your desktop application. All you have to do is write a library .so
-
Hard Drive Gained Space for no apparent reason...
Good Evening, Today I was using my MacBook Pro and I noticed that for some wierd reason my HDD Space Available went from 370.33GB to 370.37GB for no aparent reason. Why has this happened. My Mac has been holding steady at 370.33 for the last month (t