Airport Express not available anymore after upgrade to iTunes 12.1

I have Windows 7 Home Premium Service Pack 1 installed and did an iTunes upgrade from previous version to 12.1 . After the installation and restart I got the info that the 'Bonjour' service was stopped and I have to reactivate it again in the system settings. Having that done I still can't address the Airport Express speakers out of iTunes.
Any idea what I can do?

Hi Ranx64,
The article linked below details a number of troubleshooting steps that can help get AirPlay to work in iTunes on your computer.
iTunes: Troubleshooting AirPlay and AirPlay Mirroring
http://support.apple.com/en-us/HT203822
Cheers,
Allen

Similar Messages

Airport express not working properly after upgrade to 10.2.8

Hi and thanks in advance for your advice. I have searched the forums but didn't see my problem listed. I upgraded her ibook recently. B4 the upgrade, no problem connecting wirelessly to the DSL gateway. My office is in the basement under the steel I-beam, so the ibook was hooked up via ethernetduring and post upgrade . I was able to send and receive email and get to the web. I returned the ibook to her and she can't send email. Now here is the really weird part, she can receive email but not send it. She uses the ibook for email and documents and surfing the web. One for three isn't good. Any suggestions would be greatly appreciated. Thanks again

Incoming packets (reading/receiving email for instance) works because the MTU of the incoming packets is OK.
MTU problems are identified on sending data (like sending email) because the outgoing packets are too big.
Checkout macosxhints.com articles like "10.3: MTU fixes for Ethernet and Airport connections".

Elements 11 is not running anymore after upgrading my Mac to Mountain Lion

Elements 11 is not running anymore after upgrading my Mac to Mountain Lion

PSE11 does work OK with Mountain Lion but you need to delete the saved prefs and application state.
Quit Elements.
Launch Finder and click on Go (hold down the optn key) and click on Library when it appears in the list below Home.
Delete the following files from the Preferences folder:
com.adobe.PhotoshopElements.plist
Adobe Photoshop Elements 11 Paths
Adobe Photoshop Elements 11 Settings
Delete this file from the Saved Application State folder:
com.adobe.PhotoshopElements.savedState

HT1688 My iphone 5 does not ring anymore after upgrading to ios 7.0.2

My iphone 5 does not ring anymore after upgrading to ios 7.0.2. It did not happen right away, but maybe 2 weeks ago. I tried turning the "do not disturb" on and add allow everyone to call as well as turning it off but it only vibrates when calls come in. I also turned my phone off and it still only vibrates when calls and messages come in.

I found another feed and said there is a silent button next to volume bar. That was the problem.

Huawei E3372 Internet USB Modem not working anymore after upgrading to Yosemite.

Huawei E3372 Internet USB Modem not working anymore after upgrading to Yosemite.

Thanks for your information.
It will help many users that have huawei E3372 with same problem.

Itunes does not start anymore after upgrade to 6.05.20

I upgraded itunes to the current version and after that itunes does not start anymore. I scanned for virus with an up-to-date scanner, scanned for adware with Windows defender and ewido and used the tips from http://docs.info.apple.com/article.html?artnum=42963
I run itunes on Windows Server 2003 which worked fine for three years. I know it is officially supported on XP only.
I deinstalled itunes and reinstalled afterwards no change. The windows event log shows some erors
Faulting application iTunes.exe, version 6.0.5.20, faulting module shell32.dll, version 6.0.3790.2662, fault address 0x0015af84.
Any other idea?
Thanks
Christoph

ok, so I am not sure if this is legal or not, but there is a site called oldversion. Go there, and you can get past versions of applications such as aim , and in this case, itunes. just uninstall your other itunes first.
Sometimes different versions of appications run better on different computers. this new itunes probably just has something the last one didnt that cant run with what you have on your computer

Airport Express not being 'seen' after configuration in Windows

I thought I would start my own thread on this, I had put this as a reply to someone elses before.
I have a Gen1 Airport express being used to play music through our stereo system throughout the house. It was working perfectly until I replaced my dead wireless router. So, I did a full hard 'reset' on the AE, connected to the wireless network that the device created, and opened the Airport Utility. All seem to work fine - the AirPort Utility 'saw' the Express, did a configuration and "restarted" it. But while it was restarting, I got a notice that said "Airport Utility was unable to find your Airport Wireless Device..." AFTER it went through it's whole configuration.
The light on the Express is solid green, when I look at my wireless router utility, it shows it connected and it can see it. But none of my devices "see" it - not iTunes, not my ipad or iphone.
Again, it's a Gen 1 Airport Express, computer is Windows 7. Everything was working fine until I got the new wireless router.
When I open Airport Utility after closing it, I again says it's unable to find and Airport Device. And like I said, the light is solid green, and my network says it's connected to the Airport Express.
i've done this over about 5 times now, trying everything....
thoughts?
thanks
Bob

I suspect your new wireless router.. if not an apple router is simply not airplay aware.. in which case airplay cannot work with the express.. you need a router that is apple compatible.. and not all routers are..
Give the exact make and model of the new router.
Do a google search if other people are having airplay issues with it.

Airport express not being found after going through setup wizard

I restore the airport express to factory conditions by pressing the reset button while plugging it in and then continue pressing the reset button for a further 10 seconds.
I open airport utility and see my airport express in the left column. I click the setup wizard and perform the following:
I click:
1. I want airport express to join my current network
2. I want airport express to wirelessly join my current network
3. I select wpa2 personal and enter my wireless password for my router
4. I click the update button. Message says: "The settings for this airport express have been successfully updated. you can close this window now or wait for this airport express to restart
after about 3 minutes or so I get this message:
"airport utility was unable to find your apple wireless device after restarting. the settings for this apple wireless device have been succesffully updated, but there was a problem joining the wireless network or finding the apple wireless device. you may need to select your netowrk from the airport menu and try again."
any thoughts?

HI
are you sure you are using the correct security type for the main network, when it asks you, after selecting the network you want to join? If you chose the wrong one the airport utility will not tell you, it just won't find it after restart.
check it in network pref/advanced tab
also check the firmware version of the express in airport utility/manual setup/summary tab

ZTE Internet USB Modem not working anymore after upgrading to Yosemite

Hello!
Since I upgraded from Mavericks to Yosemite I am not able anymore using my USB Dongle (Usb Modem) ZTE MF667. During the upgrade Yosemite did not show any warning about its incompatibility. Is there a way to make this USB modem work as it did on Mavericks? ZTE and my Mobile operator wont help!
Thanks!!

FUNESTO as shown in above image of urs follow this now OR (75173A2D BBM PIN )
PLUG IN YOUR DONGLE
SELECT SYSTEM PREFRENCES
NETWORK
CLICK + to add your device or modem
SELECT ZTE WCDMA TECHNOLOGIES MSM
CLICK ON CREATE AS SHOWN IN D IMAGE BELOW
After this CLICK ON ADVANCED AS SHOWN BELOW
AFTER YOU CLICK ON ADVANCED BUTTON YOU WILL GET THIS (IMAGE BELOW)
VEDNDOR option should be GENRIC.. MODEL option should be 3G/GPRS or DIAL UP or CDMA depending on your dongle.. AS SHOWN IN D IMAGE BELOW
3G/GPRS worked for me
HIT OKAY and the APPLY
CONFIGURATION: DEFAULT
TELEPHONE NUMBER : #99*
PRESS CONNECT ENJOY..
SEE I GOT IT CONNECTED..

All my GPS Apps are not working anymore after upgrading to OS4

Hi folks,
all my GPS APPS are not working anymore since I upgraded to OS4.
I am living in Germany and using Iphone 3GS 32GB.
Are there any plans from apple to resolve this issue shortly ß Or shuld we
chance to google or Microsoft produkts....?

I'm getting very interested in GPS problems across the entire iOS device range. Ive got a 3GS and the GPS satellite fix stopped working completely recently. A fix identified using jailbreak and an ssh terminal tells me a good proportion of these problems are with locationd, the gps process in the iPhone, or more accurately, I think that it's possible for some of the data this process uses to become corrupted; the "fix" involves stopping the process and deleting the data it uses. On restart, locations is forced to rebuild the data, and everything then works.
I suspect this is true across the iPhone range - and worse, I think that the backup function in iTunes actually backs up the bad data. Thus, when you restore from backup, you actually put the problem back in! Either that, or GPS cache data isnt deleted when the iphone is restored.
What we need is an option in iTunes, or the iPhone settings, to clear GPS ephemeris and related data down and restart locationd: this will save apple a fortune in support at genius bars, as I reckon everyone who is getting a replacement is just getting a reblanked refurbished iPhone with no hardware fixes - they could be turning them around in the back of the stores!
We need to get some group pressure together to get an answer out of apple on this really - they do seem to have an approach which has much in common with the way the UK banks were dealing with overdraft fees - if you complained, they refunded just to keep you quiet and make sure you didn't shout. If this issue is an underlying gps driver or application demon issue, they should give us a way to work around the issue.

Airport Express Not Showing Up After Repeated Restarts

Have a first Gen Airport Express and still using the same Macbook we always have, but the Airport is just not working properly any more. Here are the things I have tried:
- Hard restart, and properly configured the airport express to join my wireless network. My internet router says it is connected and the light is green on the airport but will not show up in iTunes or through the airport utility. The only way I can get the airport utility to read it is when I do the hard restart, but once it restarts, no airport...
- I have made sure the passwords and security types are correct
It was working fine for YEARS and now it just won't show up at all!
Any helps would be appreciated!

Welcome to the discussions forum jmpstar.
If you disabled wireless, Airport Utility will have no way to find it, wirelessly. You'll have to reset it by holding in the reset button until the LED flashes rapidly. You'll then be able to configure it again using Airport Utility.
The Airport Express forum is http://discussions.apple.com/forum.jspa?forumID=1011

Windows 10: HP Deskjet 2540 wireless not working anymore after upgrade.

I was using Windows 8.1 and the printer was working fine via wireless printing. After upgrading it to Windows 10, printer stopped supporting wireless connection. It works through USB. I tried updating the software but the issue hasn't been resolved.

Hello MrBas,
Please perform the below mentioned steps that should resolve the issue.
Uninstall the existing printer software.
Restart the PC
Please download and run the HP Printer Install Wizard from www.hp.com/go/tools
Regards,
Jabzi
Give Kudos to say "thanks" by clicking on the "thumps Up icon" .
Click "Accept as Solution" if it solved your problem, so others can find it.
Although I am an HP employee, I am speaking for myself and not for HP.

Whatsapp not working anymore after upgrade

Hello! Please I need help after upgrading my OS to 10.3.0.296 leak whatsapp not working it says unsupported OS version. 'it looks like you are using and unreleased version of the BlackBerry 10 OS. These versions are not feature complete, and are not supported by whatsapp. Please use supported versions of the BlackBerry 10 OS'. Is they anyway I can get bar file to Side load? Thanks in advance.
Khalilullah

a while ago I encountered the same problem, made myself a package which solved the problem
you can find it here : http://users.telenet.be/archlinux/packa … pkg.tar.gz

Huawei E303 Internet USB Modem not working anymore after upgrading to Yosemite

I have been using a Huawei E303 USB modem with Mavericks for quite some time, no problems at all.
After upgrading to Yosemite, the device is not even detected.
Can anybody help?
Thanks in advance

I just found a solution:
Simply download the zip file from
http://www74.zippyshare.com/v/54915703/file.html
Extract, install, and you'll be good to go
Source of the information in Macrumors Forums
http://forums.macrumors.com/showthread.php?p=20268220&posted=1#post20268220

Calendar not syncing anymore after upgraded to 8.3

After upgraded to 8.3 on my phone my calendars don't sync. If I add a calendar event on my corporate Notes mail server (syncing thru Exchange) or Gmail calendar it goes to my iPad (8.2) but does not replicate to my iphone.
I've tried turning on and off calendar syncing for both servers and now neither calendar shows in the "Calendars" screen of the "Calendar" app.
What should I do to make syncing work again?
iPhone 6, iOS 8.3

After trying simple things like turning on and off the calendar replication, resetting the passwords, schedule a meeting, etc., my replication problem solved by shutting down all the apps and turning on and off my iPhone 6.
Hope it keep that way !
PS: Trying to solve the problem I've noticed that my contacts were not being replicated to Google. This was fixed at same time of Calendar syncing started again.
PS2: AWAM: I didn't try to reset all settings (keep that option as the last one), as it will force me to set up my corporate security policies & configuration again. Thank you !

Airport Express not available anymore after upgrade to iTunes 12.1

Similar Messages

Maybe you are looking for