AIrport express not reading my airport card suddenly..

After a short period I managed to get my airport express to work thru my laptop. Then it was on to my PC for about 5 hours. That didn't work at all and in the process now I can no longer use express on my laptop. I tried hard resetting and reinstalling the software.
This message keeps coming up when I tried to go thru the setup:
There was an error communicating with your AirPort card. Please make sure it is installed properly and try the AirPort Setup Assistant again.
My DHCP is on and working fine.. I'm quite confused. Please help thanks

Hi silatix and welcome to Discussions,
You might have to do a Hard Reset:
Resetting
Also make sure you have the latest software and firmware for the Airport Express:
Software and Firmware
Plus have you done tried Software Updater on your Mac?
This helped me with my PC:
Airport Software for Windows
hope this helps.....
Powerbook G4 1.67 15", 1 gig ram, 128 vram, 80 gig harddrive Mac OS X (10.4.8) Powermac G3 266 mt, Dell 5150,ibook G4, 1 gig shuffle, epson printers, airport

Similar Messages

Airport Express not seen in Airport Utility! PleaseHelp!

Airport Express not seen in Airport Utility! PleaseHelp!
Changing Utility version did not help.
I have successfully used my Airport Express 802.11n A1264 (1st gen.) to stream my iTunes music wireless to my living room stereo. Lately my Airport Express looses connection after every restart and does not show in the Airport Utility.
I run 10.6.8 on a Quad core Mac Pro. up to date on al software updates per 10.6.8 I use a 3rd gen. Airport Extreme 802.11n.
W.W.

I actually did this by myself not into the computer but a secondary Ethernet port on myTripple play Fios modem.
The Express showed up right away. I did the reset and set it up in the utilities to join my existing wireless network. I don't remember all steps but at some point it asked me to put in internet info, I did not, and then it asked me if I wanted the amber flashing stoped so I could use it to stream music. I clicked yes and the set-up finished with a green light. After I disconected the Ethernet cable, plugged in the Express in my living room stereo wireless, it has been working normal since. I restarted a few times, green came right back.
James since you had the right idea I gave you the 10 points. Thank you for being helpful.
Walter

Airport express not listed in Airport admin utility, no music

I had my stereo connected to my airport express to stream music from my imac.
Its been working great for a year. About 2 days ago I did some updates and now
the light is blinking orange and no music.
I have tried to reset the AE with a paperclip but its still not showing in the Airport Admin Utility NOR the Airport Setup Assistant.
Not sure where to go from here....
thanks Laura Drew

When I open the Airport Admin Utility, even when the AX is connected via ethernet, it is still not listed there. I hit rescan and it never surfaces. If I hit OTHER I get a screen that says 10.0.0.1 (if I remember correctly) then I put in the pw public.
10.0.0.1 would be the correct default LAN IP address for the AirPort Base Stations.
The screen says its rebooting the AX. The light turns green for apx. 2 seconds then turns back to blinking orange.
If I unplug it from the ethernet, I am able to see it under the airport icon.
And this would be normal when the AX is not connected to a network. I have assumed that your are using a Cable/DSL modem for your Internet connectivity and that you had not replaced the Ethernet cable between the modem and the AX just yet. So a blinking amber (orange) status light would be correct.
I choose it, plug the AX into the stereo but the light never turns green, and itunes says it can't find the AX.
Connecting the AX to a stereo would not change the status light. Again, remember a green status light indicates a valid network connection.
Maybe I will need to do it thru my router?? could my airport card have gone bad? but it seems I can connect to other networks (my neighbors)??
You can certainly set up the AX while it's connected to a router. I agree with you that it shouldn't be a problem with your AirPort Card.
So now I have to admit, I'm a bit baffled about your current network configuration. My confusion is, whether or not, you are using an Internet router, in addition to the AX.
Would you please confirm for me which of the following two network configurations, 1 or 2, that you currently desire...
1) DSL/Cable modem > (Ethernet cable) > [WAN port] Internet router [LAN port] > (Ethernet cable) > [Ethernet port] AX [Audio port] > (audio cable) > stereo, or
2) DSL/Cable modem > (Ethernet cable) > [Ethernet port] AX [Audio port] > (audio cable) > stereo
...or something else?
In other words, are you using the AX for both your Internet connectivity/iTunes streaming or another router for the Internet and just using the AX for streaming iTunes?

Airport express not supported in airport utility 6!

all of a sudden my airport express is not supported by APU 6. tried to install the old one, 5.6, but Lion 10.7.4 will not allow it.
so now what? I have to buy a new airport?

HPNY, unfortunately, if you click on the link shown within:
"This version of AirPort Utility doesn't support this base station. Use AirPort Utility 5.6 to configure or manage this base station. AirPort Utility 5.6 is available at...."
it will take you to 5.6.1 - I fell for that one. That download does not work in Lion. You need to click on the link in bobwild's 06/12/2012 4.23pm post which takes you to 5.6 which is the Lion compatible software. Everything works for me now (thanks bobwild) but for an hour I had believed two previously workable 'old' Airport Expresses had suddenly become expensive and redundant legacy hardware.
I can understand Apple's introduction of parallel software but not their apparent failure to explain what's happening. This is actually triplicate software, not just parallel. Thank goodness for the contributors on these forums doing Apple's work for them.

Old airport express not recognized by airport utility

Mine is a two part problem. I was having issues with my old Airport Extreme Base Station. I was dramatically losing data transfer speeds just 20-30 feet from its location. I also noticed that signal strength no longer made it upstairs to the master bedroom. I thought that after 6 years, it finally died on me. I purchased a brand new Netgear dual band 5G router and performance improved but I still am having difficulty with the non-5G band upstairs. (I understand that 5G doesn't travel as far but is faster. I thought it would be better to use my other network for devices upstairs.) I still have the Airport Extreme and believe it or not, a really old Airport Express. I've tried to use both to extend the range of my non-5G network and have failed miserably at both. The Airport Extreme keeps giving me problems during set up to extend range and my Airport Utility doesn't even support the Express. (see photo)
Any suggestions?

Two separate issues here:
I still have the Airport ExtremeThe AirPort Extreme would not be compatible with a Netgear router if you are trying to "extend" or "repeat" the signal from the Netgear wirelessly.
The reason.....Apple designed their "extend" feature to only work with other Apple routers, so it would be extremely unlikely that this feature would work with a 3rd party router for the purpose that you ask about.
If you are able to permanently connect the Extreme to the Netgear router using a permanent wired Ethernet cable connection, then the Extreme could be configured to provide additional wireless coverage in that manner.
Airport Utility doesn't even support the Express. (see photo)
That would be correct if you have the older A1084 or A1088 versions of the AirPort Express. To confirm, locate the model number on the side of the Express.....hard to see....you may need a magnifying glass to see the number.
It will take a Mac running the older Leopard or Snow Leopard operating system, or a PC with AirPort Utility installed to be able to administer the older Express.
Unfortunately, this version of the Express does not even have an "extend" feature, to it too would also need to be permanently wired to the Netgear or the Extreme if you need more wireless coverage from the Express.

AirPort Express not recognized by AirPort Utility, but connected to WiFi network

Hi all,
This problem with AirPort Express is driving me nuts. I purchased AX to use it mainly for AirPlay, but I never managed to get it fully working.
It seems to be working fine for some time after initial boot, but then the AirPlay play option disappears from iTunes, and AirPort Utility (5.6.1) no longer finds any AirPort device.
I'm using a Planet WNRT-625G router as a base station (connected to my modem box), and I'm joining this WiFi network as a client (I understand extending the network does not work if it's not an AirPort Extreme station?). The WiFi is protected by a WPA2 pre-shared key, and I have tried using different channels. I have assigned a fixed IP to my AX... all to no avail.
In the status details of my router, I can see that the AX is connected, and I am able to ping my AX... but all Apple software cannot find its own device. Any clue what may be going wrong? How does the AirPort Utility find AirPort devices?
Thanks to all in advance for your help and ideas! Appreciate it.
jfk-007

by design the AX will create a separate network when it starts up for the first time.
click on the airport icon in your menu bar. you should see something like Apple network XXXXXXXX. in order to set up the express, you will have to temporarily join its network !
you will get a message asking "do you really want to switch networks ?" and you do want to do that. now you should see the AX in AU. click on the icon of the AX once to highlight it, then click continue.
follow onscreen instructions to either have the AX create a new or join an existing network.

AirPort Express not connecting to Airport Extreme on Ethernet port

Not sure how to connect the express when using extreme on a ethernet connection.

Got help from Apple, the Airport Express must be configured through a wireless connection first and then the Ethernet connection will pic it up. Which it did.

Airport express not displaying in airport utility

My airport express has been working just fine until today. I took it with me to Hong Kong, so that I could use it in my room to create a wireless network for my iPhone. When I brought it home, I plugged it back in, and went to re-configure it for my family room. I use it for AirPlay mostly, as my speakers are plugged into it. After I went through the configuration change, there was an error, and the screen told me to close the Airport Utility and retry. Well, I've had no success since. I've reset the AE multiple times, and it still does not display in the airport utilty, and the AE itself flashes yellow.
Any suggestions?
Thanks,
ted

Update: After leaving the utilty on for a while, and plugging the AE into the wall near my time capsule, it finally showed up in the window. I was then able to configure it properly. I guess I just needed to be more patient.

Wired AirPort Express not showing in AirPort Utility or iTunes

So I was using my two AirPort Express's to wirelessly play iTunes throughout the house. Recently I wired the house with Cat6 and decided to wire in the AXs for more reliability. My AXs are 1st gen and are running 7.6.1. The problem is, when I turned the wireless off on them, they no longer show up in AirPort Utility or iTunes. I can get them to show in utility by selecting "Configure Other" then manually entering their IP address and password, but that's the only way and they never show in iTunes and disappear from Utility once I "Update". They are wired to a Gigabit switch which is wired to a Netgear router.
Some additional Info:
Green light is on and solid
I can ping them and connect manually
"Connect using ethernet" is set
Connection sharing "Off (Bridge Mode)" is set
I also want to extend my wireless range with them, so I've mirrored my wireless settings and used "Create a wireless network" (tried without doing this as well without luck)
Enable AirPlay is checked
Netgear WNDR3700v2 Router Firmware version 1.0.0.36
Keebox SGE08 Gigabit Ethernet Switch
Windows 7 Home Premium SP1 x64
Any idea why I can't see or use them in iTunes and AirPort Utility?
Thanks!
-Jake

I wish that I could help you. I'm having a similar problem, but wireless.
A couple months ago, my two Airport Expresses and my Apple TV disappeared from iTunes AirPlay. When I ran the Airport Utility, the Airports and Apple TV could not be located. Interestingly, the Airports displayed a green light and all iDevices (iPod Touches and iPads) could connect to the Airports via AirPlay. Like wise, Airport Utility on the iDevices located the Airports. So I connected an Airport to the router via a Ethernet cable. Once connected via wire and after a hard reset (with an orange light displayed) the Airport Utility found the wire-connected Airport. I ran the utility to set up the Airport and a green light came on. Then the wire-connected Airport was visible on iTunes AirPlay. So I unplugged the Airplay and returned it to the stereo. The green light came on, but now neither iTunes not the computer based Airport Utility could find it, even though the iDevices could. I repeated this process expecting a different outcome enough times to be certified insane.
So as I sit my computer based (Windows Vista) Airport Utility and computer based iTunes (the new version) cannot locate the Airport Expresses even though the iDevices readily see them. And their green lights display a connection to the network.
I even tried a forced connection by pasting the Airport's IP address (obtained using Airport Utility on iPad) into the manual configuration of the Airport Utility on the computer. Oddly, once the IP address was entered, the computer based Airport Utility could see the specs of the Airport Express. But when I tried to save or conclude the Computer based Airport Utility configuration, I got an error.
Another odd thing is that the Remote App on my iDevices no longer works either. I can no longer connect to my iTunes library. The remote simply can't find my Library at all. (I confirmed that Home Sharing is on). But I noted that in iTunes is indicated that four devices work connected or linked to the Library. So I had iTunes "forget" the devices "connected" for Remote and tried to reconnect. I got the number could on the iDevise but the devise never appeared in iTunes Devises for selection.
So whatever problem is preventing iTunes from locating my Airport, is also blocking my iDevises from connecting to iTunes. Meanwhile, my iDevises can sync with iTunes (while wired - I never tried a wireless sync) and can connect via AirPlay to all Airports.
I've researched this for months and found nothing to work. I'm frustrated to the point of doing something drastic like dumping iTunes and finding some other player to manage my music and stream to my stereos. I'd rather not but the vast majority of my Library can't be played over my stereo.

HT1218 airport express not showing in airport utility

Airport Extreme is shown in airport utility but airport express is not, light is solid amber after resetting any ideas? I want to use it to stream music from itunes through stereo speakers.

A solid amber light idicates that the devices is rebooting. It's normal to see that after a hard reset or factory reset. Allow up to 2 minutes for the device to power up and appear in Airport Utility.
If you are using Airport Utility 6.1, you will have to click the Other Airport Base Stations button on the top left of the window, and select the Airport Express which will take you through an assisted setup.
If you are using Airport Utility 5.5.3, the Airport Express will automaticall appear on the left side of the window. Select the device and click Continue on the bottom right and follow through the assisted setup.

Airport Express not showing in Airport Utility, flashing Amber

I have 3 Airport Express units. Two of the 3 work fine and show up in Airport Utility v.6 , but the third flashes amber and is not recognized in Airport Express. I have tried soft and hard resets, and it always goes to a flashing amber light and is never reocgnized by Airport Utility.
If I pull down the Wifi icon and go to Airport Express, I get the following window:
Any ideas would be appreciated.

The screenshot is still not coming through here.
Sorry, but I am not familiar with any of the model numbers that you have posted. North and South American versions of the older Express models will be A1084, A1088, or A1264. The newest version of the AirPort Expess is A1392.
Regardless of the model number, all that you can really do is power up the Express for a few minutes, and hold in the reset button on the side of the device for 10 seconds. Then, release the reset button and allow a full minute for the Expess to restart to a slow, blinking amber light.
If you still cannot "see" the Express in AirPort Utility, you either have a defective Express or a much older version that is not supported by AirPort Utillity 6.x.

Airport Express not showing in Airport Utility

I am on a tripple play Fios modem wired to my 3rd gen. Airport Extreme to my Mac Pro running 10.6.8. My Airport Express which is plugged into my living room stereo (I have used successfully before) is not showing up in the Airport Utility and blinking amber endlessly. Unplugging and 10 sec. reset with the reset button, no difference. Please help.
W.W.

I was able to install utility 5.6 (I am on 10.6.8) but when the Express showed up and I followed the instructions, I got this message at the end: I tried to attache the sceen shot from the message I got, It did not work: It says: "Nothings connected to the WAN port. Connect the broadband modem or network to the Ethernet WAN port"
I never changed any Fios modem or Ethernet cables. Express is blinking.
W.W.

Old airport express not supported by Airport Utility

I have two first generation airport express units connected to a lat 2010 airport extreme. The units are not allowing for sustained airplay support or iTunes sharing. It is very inconsistent. Since my Mavericks update I cannot support those units run updates, diagnostics or even reset. What do I do?

Please check the model number on the side of each AirPort Express.
A 1st Gen AirPort Express is model number A1264, which is fully supported by Mavericks.
If you see model number A1084 or A1088, these are much older versions of the AirPort Express that were sold long before Apple began to use the Generation naming for AirPorts with the 802.11"n" wireless products in 2007.
You will need to have a Mac running Leopard or Snow Leopard, or a PC....or borrow one for 5-10 minutes.....if you need to administer these older versions of the Express.

Airport Express not supported by Airport Utility

I have a few Airport express around the house and since I have updated to OS 10.8.4 i now get the message "This version of AirPort Utility doesn’t support this base station. Go to AirPort Service and Support for more information."
So I have gone to Airport service and support and nothing is mentioned or listed.
Does anyone know why I am getting this message? They are all 1st gen airport express stations.
It is really annoying as my house has been set up round these and now none of them work.
I have reset and restarted them without any success. I have connected via ethernet etc
Any other ideas?

I gave an answer just before you posted.. in the other thread.
Load in 5.6 utility.
How to load 5.6 into ML.
1. Download 5.6 for Lion.
http://support.apple.com/kb/DL1482
Click to open the dmg but do not attempt to install the pkg.. it won't work anyway.
Leave the package open on the desktop so you can see the file. AirportUtility56.pkg
2. Download and install unpkg.
http://www.timdoug.com/unpkg/
Run unpkg on the desktop.. If your Mac refuses to run the software, because it wasn’t downloaded from the Apple store, go to security in preferences and allow other software to work.. this is limitation of trade methinks. You can set back later if you like.
Now drag the AirPortUtility56.pkg file over to unpkg.. and it will create a new directory of the same name on the desktop.. in finder, open the new directory, drill down.. applications, utilities .. there lo and behold is Airport utility 5.6 .. drag it to your main utilities directory or just run it from current location.
You cannot uninstall version 6 (now 6.3 if you updated) so don't try.. and you cannot or should not run them both at the same time.. although I have had no problems when doing so.

Airport Express not seen by Airport Utility

I have a time capsule that runs my secure wireless network and two airport express stations for airtunes. The Express units have stopped working and are not seen by the airport utility. They have worked in their previous locations for months so they are in range. I already tried resetting them. I have not changed anything with my network and the time capsule is working.
Thanks for any help figuring this one out.
Message was edited by: Valentine166

Well it turns out that when I rebooted the TC everything worked again.

AIrport express not reading my airport card suddenly..

Similar Messages

Maybe you are looking for