Airport Express Not Working

Maybe someone can give me a hand. The airport express is working great for AirTunes but will not hookup to the internet. We've plugged in via ethernet wire and it works fine. We've also tried resetting the airport and unplugging it, resetting our computer. No dice. On the top of the computer screen the aiport indicator reads full internet perfectly but cannot connect. We're stumped.
Thanks for anyone who can give us a hand.

Assuming you have a green light and you wireless mac can see the network but you have no internet; unplug the cablemodem for a minute.

Similar Messages

  • Airport express not working since today's itunes update

    Since updating iTunes today, Airport Express not working. More specifically, the Airport software will recognise the device exists, but iTunes cannot connect to it, just getting error message.

    Ray Dio wrote:
    Since updating iTunes today, Airport Express not working.
    try this:
    go system preferences > network > airport > advanced > TCP/IP and set *configure IPv6* to off. click on apply.
    now have iTunes connect to the remote speaker again.
    JGG

  • Airport Express not working with Comcast

    I used to have AT&T and had my airport working well. Yesterday i changed to Comcast and my airport is not working the light stays yellow.. I tried resetting it but it didn't work.. I use it with my old Cisco router and its working. Whats wrong with my Airport Express? My computers are Windows 7

    A solid amber light indicates that the AirPort Express has locked up....or it is defective.
    Suggest you that try a Factory Default Reset as follows:
    Pull the Express from power
    Let it rest for a few minutes
    Hold in the reset button and keep holding it for another 8-10 seconds while you plug the Express back in to power
    Release the reset button after the hold period and allow 40-45 seconds to restart
    The Express should display a slow, blinking amber light at this time
    If you continue to see a solid amber light after a few tries with a Factory Default Reset, the Express has failed and it will need to be replaced.

  • Airport express not working with apple products

    We have been trying to get airport express to work with a macbook pro, ipad2, iphone, laptop, htc wildfire - havent even tried the air music or printer yet! 
    We have a green light on the airport express which is connected to an ntl cable modem(virgin media network).
    Currently the only thing that will connecy is the laptop and my htc phone.  All the apple products will not connect? 
    We went to the apple store today and it worked grand when it was plugged in - the apple products all worked.
    The network comes up on ipad2 but when you press connect it says 'unable to connect'
    can anyone help us please?
    thank you

    I have the same issue.  Mine fixed itself for a bit and now it's broken again.  I'm thinking it's going to be intermittently broken.  I've tried turning both devices off and on again but that did not help.

  • HT2508 airport Express not working in Mountain Lion

    My old airport express stopped working properly since I loaded Mountain Lion.  I purchased a new Airport Express and it will work, but the audio fades in and out.  I am connected from the airport express unit to my audio receiver via a 3.5 out into RCA (red/white) connector into the receiver.  Can someone suggest a cure?

    I have three printers up and running connected to an Air Port Express,
    and since I upgraded to Lion I can't connect to any of them, so I continued using SL on this MBP17.
    System Preferences does not show any of my printers.
    I opened Air Port and it says I need to update.
    When I click on the update button, it takes me to the App Store, but no Air Port Software — What gives?
    Now having the same problems with Mountain Lion.
    Hoped ML would fix the problem, but NO.
    I find I have to save documents to a flash drive and go to my old PowerMac G4 to print.
    Steve we miss you. Apple is going to crap without you.
    Message was edited by: random47 to fix typos and add information.

  • Airport express not working with 8.0

    airport express was working fine until I downloaded IOS 8.0
    Cannot get icon to show up on screen to play on airport express network

    I have the same issue.  Mine fixed itself for a bit and now it's broken again.  I'm thinking it's going to be intermittently broken.  I've tried turning both devices off and on again but that did not help.

  • Airport Express not working with Motorola Surfboard Sb6141 and TWC

    My 2012 Airport Express was working fine with my Motorola Surfboard Sb6141 and TWC until about a week ago when the signal started dropping constantly. I hard wired the modem to my computer and everything worked fine. I took the Airport Express to the Genius Bar and it is working fine. I have followed the instructions posted throughout this board to reset the AE to factory settings, then turn everything off for 1/2 hour, turn on just the modem, the the AE 15 minutes later and the computer 15 minutes after that, but to no avail. When I try to set up the AE using Airport Utility, it allows me to assign a name and password, but then the light goes to solid amber and I get "An unexpected error occurred. Try again." Any ideas?

    I'm still struggling trying to get the SB6141 to stay connected with my Airport Extreme but it drops altogether every day or 2 but if you're looking for an alternative, I've heard the Netgear CMD31T works well with the airport.

  • Airport express not working after updating to 7.6.3

    Hi all,
    I bought my airport express about 6 months ago. It's been working perfectly. Then this morning, I woke up to the blinking amber lights, not good.
    I restarted the modem, and checked the connection (by hooking up my mbp directly to the modem) and everything is fine. I plugged in the ethernet cable to airport express, powered down then up, no luck. Airport utility popped up (on my mbp) asking me to update firmware to 7.6.3 (I had 7.6.2). So I reconnected my mbp to the modem and updated the firmware, connected the ethernet cable back to airport express, powered down/up, still no luck. I grew desperate and did a hard reset, still nothing!
    I am not sure what happened here, or if anything had changed, since it was working fine as I went to bed last night.
    anyone else seen this before? i checked with Apple, it seems that my airport express is out of the free-repair period.
    pls help
    thanks a lot

    Worked on it some more and finally realized that I've plug the ethernet cable in the LAN port instead of WAN port. So, internet is back. Still don't know what happened (when it died), but owell.

  • DTS (5.1) Audio Through Airport Express: Not Working

    I imported some DTS-encoded WAV files into iTunes, to stream to my audio system via an Airport Express. The AE is connected to the preamp via optical, the WAV files were not converted or modified in any way, and the volume is @ 100% in iTunes.
    The preamp receives the files and the DTS icon lights up, so all seems to be good... except the audio output is 2.0 only. As a test I converted the files to Apple Lossless (since I know the AE has to make that conversion), same result.
    As another test I turned down the volume in iTunes and the audio became white noise, another indication that the files are DTS.
    If I burn an audio CD using iTunes and the same WAV files, and play them on my OPPO player I get 5.1, the final and conclusive proof that the files are properly encoded.
    I know I've read that streaming DTS-encoded audio via the Airport Express is possible, so I'm not sure what I might be doing wrong.
    Any ideas?

    Hi,
    I experienced some DTS files in iTunes, with my AirPort Express some months ago, it was working fine on my Marantz receiver. A few days ago I wanted to listen to them again, only white noise... I wanted to rip by myself a DTS-CD, therefore I found this out. Apparently since AirTunes has been turned to AirPlay, it's not working anymore (?) / the same way.

  • Airtunes/airport express not working with MacBook

    I have a new Macbook and an older Powerbook. The Powerbook is working nicely with my airport express and airtunes. I copied all settings to the new Macbook and configured it the same way, I also did the firmware update.
    ITunes found the airport express, connected and I could listen to the music.
    Later during the day it didn't work anymore, although I didn't change any settings. ITunes can no longer connect to the airport express, the airport utility does find the base station, but I can no longer configure or reset it.
    I started the old Powerbook again which is still working without problems
    What can I do to get the Macbook working as well ?

    Same issue here!! Everything working fine with OS X Tiger. As soon as I upgraded to Leopard the problems detecting the AX started. The setup I have is the following:
    -Linksys wireless router
    -AX connects to wireless network to play songs through iTunes and to print via USB printer.
    The green light on the AX is solid which means that it is connecting to the existing wireless network just fine. The problem lies with Leopard detecting and connecting to the AX. I have tried just about everything over the last few days and nothing seems to work. Some resets and updates let my macbook detect the AX for a little while but then it starts to drop and cannot be detected anymore. Apple HAVE to do something about this. These are two apple products not communicating properly. What ever happened to the good old days of apple products being so user friendly and "plug-and-play"
    Disgruntled Mac user

  • Airplay, Airport Express not working, 10.7.1 (Lion)

    Hi,
    Trying to connect to external speakers connected to airport express. I've done this successfully before but I've recently upgraded to Lion and now cannot connect:
    I see the airport express listed in itunes, but when I click it, it just sets back to "computer" without any error message.
    If I click "multiple speakers," the airport express has a lock icon next to it. When I try to check it, it simply won't allow me to check it.
    Any advice?
    Thanks

    Microtek is famous for not providing drivers so that their old scanners can work with newer operating systems.  The last time I upgraded the teachers' computers in my schools 300 Mircotek scanners insgtantly became trash  I don't buy them any more.  won't waste taxpayers' money.

  • Airport Express not working when used with Broadband Router **HELP!!!**

    Hello.
    I have an ethernet network in my house, and I am connected to the network via a Linksys router for Broadband VOIP and internet. I am on a G5 in my home office and want to stream music to my Airport Express for my home stereo in the living room, via the ethernet connection.
    The problem is that when using the router in my network, only the Admin Utility sees the base station-- iTunes does not.
    If I remove the router from the equation altogether and plug the network ethernet cable directly into the G5, the AX in the other room works just fine and I can get internet on the G5 in the office. The problem is that I need the router to operate my Vonage VOIP phone service and to connect a second computer to the internet as well. The IP address for the router in the home office is "192.168.x.xxx" and when I try moving it to the living room and connecting the AX to it, the Admin Asst doesn't see the AX at all.
    When I connect the router to the network in the office, I can use internet on both computers and the VOIP phone service, and the AX Admin Asst. sees the base station from the other room. But again, iTunes does not.
    Is there a way to configure the router to see the AX?
    Thanks for your help!

    Forgive me if this a little off thread, but I have just managed to get this to work and thought it might help people with similar configuration issues (mix manufacturer wireless networks)
    I received an Airport Express (FW v. 6.3) for Christmas this year. I already am using a D-Link DI-524 wireless(G) router (Rev A FW 1.03) for my Comcast cable modem in my house (downstairs). What I wanted to do is to add the Airport Express in my office upstairs to my network (client mode) so that I could print from my HP Deskjet 3740 printer and listen to iTunes on my stereo through Airtunes. I have two iBooks (G3) with regular (802.11b) airport cards in them) running Tiger.
    I ran into a couple of snags though. I could see the printer in Rendezvou and I could see the airport express in iTunes. I however could not print to the printer or connect to the speakers. I was able to connect to the speakers very intermittenly and then the audio would be disrupted every few seconds.
    After a bit of hacking, what I found is that it seems that WPA PSK security doesn't work between the two. I changed the security to 128 bit WEP (ASCII mode). This means that you need an exactly 13 character pass phrase. This is necessary because Apple (and pretty much only Apple) supports 40 bit WEP (5 chars) and D-Link (and the rest of the Windows wireless universe) supports 64 bit WEP (7 chars), but they both support 128 bit WEP. I assume you could set both up as an open network if you were far enough from your neighbors, but I am in a townhouse complex, so I thought I probably better have some security on the network.
    Now I only see one network (the one set up on my D-Link router) and I can print to my printer and stream to my stereo through iTunes (without disruption). Seems to work seemlessly now.
    I should also mention that I did about three other things. I moved the LAN subnet on the D-link router to 192.168.1.1 (DHCP client address are now between 1.100 and .1.200) I had heard that this was necessary since both routers tried to use the 192.168.0 subnet, but I think this is only necessary in relay mode. I also statically assigned the IP address for the Airport Express. Finally I set up a firewall rule of Source WAN/LAN IP addresses of 192.168.1.100-200 of any protocol from ports 1-20000 to the same destination address range should be allowed to allow for all LAN traffic to be passed. I am very certain this is unnecessary and possible dangerous for security, but I thought I should mention that I did it.
    Hope this might help someone.
    Michael
    iBook G3 (600 MHz)   Mac OS X (10.4.3)   D-Link DI-524 Router. Motorola Surfboard Cable Modem. Comcast Broadband

  • Airport Express Not Working With Netgear Router

    I have two Airport Expresses connected to my Netgear WNDR3300.  I run Windows 7 on all my computers.  One express works fine, wirelessly streaming music in several rooms.  However, the other does not work unless it is plugged into my router.  When it is unplugged and I try to connect to it via iTunes I have a "connection timed out" message.  Genius wasn't able to help me, and the Apple support won't help me over the phone because the express is out of warranty.  It is a 1st generation Express, but was working fine until I installed the newer express.  Can anyone help?

    I am sorry that I don't have a definitive answer but I also have Windows computers and I have "inherited" some older Apple devices from my son and am trying to learn about them so in addition to searching this group,  I "Googled" "1st generation airport express" and it listed many specific posts in this group - I read them all and they might answer your question - good luck

  • Airport Express not working with PK5000

    I'm new to this site....
    I just bought a Airport Express to stream music and extend my wireless signal...
    I currently have a DSL connections, my modem is a PK5000...
    I'm having troubles with the connection...
    Does anyone have the procedures on what I need to change in the modem to get this to work...
    Do I hard wire it from the modem to the Express or run it on wireless?  No instructions I've found so far, is clear
    Thanks,
    Kelly

    I have the same issue.  Mine fixed itself for a bit and now it's broken again.  I'm thinking it's going to be intermittently broken.  I've tried turning both devices off and on again but that did not help.

  • Airport Express not working with printer on Windows, works fine on Macbook

    I have an airport express that is connected to my Brother laser printer. I installed the software and it works and prints fine on my macbook pro.
    I tried to also set it up using my Dell running Windows XP SP2, but after using the instructions, it looked like it set up fine and the printer is recognized, but when I try and print, it just gives me an error message that that printer is "busy or unable to print".
    Any ideas?

    Is there another solution to this problem? I have two PCs running WinXP and can not print with either one of them through Airport Express. Printing works fine with MacBook. I have Bonjour on both PCs and have run the setup wizard. The printer seems to be connecting and then hangs up on "communicating with printer."

Maybe you are looking for