Airport express on lion and airport utility 5.6

How am I supposed to configure my airport express when utility 5.6 isn't compatible with lion?
Is there some other software I can use?
Thanks

Please check again to make sure that you are using the correct application below on your Lion machine:
AirPort Utility 5.6 for Mac OS X Lion
But, if you have moved to Mountain Lion, you will not be able to install AirPort Utility 5.6 unless you use a workaround. See this article for details:
http://www.macworld.com/article/1167965/mountain_lion_and_the_ancient_airport_ba se_station.html

Similar Messages

Airport express multiple configuration and iOS utility

Hi
Just wondering if there is a way to toggle configs on iOS 5 devices iPad :iPhones with the new airport utility?
Reason : I use it as an audio device to my sound system , but when I travel ( hotel , offices , etc) it becomes my own hotspot while cconfiged as a router from the stored configs on the device .., But I have to use my MBP !
Or change it before I leave ....
Any thoughts ? Thanks

do I need to use my computer to change the profile before unplugging the airport express and taking it with me wherever I am going,
Yes, unless you have another device handy on the road with a 5.x version of AirPort Utility installed.
or will it switch automatically
No, you must manually "switch" to the profile that you want to use at any given time.

Apple tv and airport express, apple tv and airport express

Simple questions from novice: If I have Apple TV, would there be a need to also have Airport Express? What is the main difference?

An Apple TV will work on any WiFi network so an AirPort Express is not required.
For the most part an ATV and an AirPort are 2 completely different devices. An Apple TV is intended to be connected to a TV and a home theater receiver for streaming audio and video. Even for audio the artwork will be displayed on the TV screen as well as all the menus.
An AirPort Express is a wireless network adapter for setting up a or extending a WiFi network. As a bonus it has an audio out jack which is used with AirPlay which is built into iTunes and iOS devices for an external speaker. It can also be used to create a wireless printer using it's USB port.
http://www.apple.com/ca/appletv/
http://www.apple.com/ca/airportexpress/

HT4145 Does this article apply to OS X Lion and Airport Utility 6.0? Reason: Airport Utility cannot find my Airport Extreme (4th generation) wirelessly on my Time Capsule configured network even although the firmware in both units is up to date.

Does this article apply to OS X Lion and Airport Utility 6.0?
Reason: Airport Utility cannot find my Airport Extreme (4th generation) wirelessly on my Time Capsule configured network even although the firmware in both units is up to date.

I thought you were trying to Extend the network with an Express as the article mentions you pointed to...
You can't find the Airport Extreme then...
I woudl suggest doing a Factory reset....
http://support.apple.com/kb/HT3728
Then you should be able to set it up just as you did when it was new....
Factory default reset (using reset button)
If the AirPort Base Station or Time Capsule isn't accessible from AirPort Utility, the Factory Default reset can be accomplished by using the reset button.
Unplug the AirPort Base Station or Time Capsule from power.
Press and hold the reset button with a pen or pencil, then plug the AirPort Base Station or Time Capsule back in while continuing to hold the button until you see the light (LED) flash rapidly. This should happen after a few seconds.
Release the button. This will factory default reset the AirPort Base Station or Time Capsule.

I just bought an AirPort express. Currently I have a qwest wired router plugged into the back of my computer via an ethernet cable. Can I just unplug the ethernet cable and plug it into the AirPort express, then use the setup utility?

I just bought an AirPort express. Currently I have a qwest wired router plugged into the back of my computer via an ethernet cable. Can I just unplug the ethernet cable and plug it into the AirPort express, then use the setup utility? Most of the discussions involve an existing wireless network. I don't have one.

Correct. That's the way to set up the AirPort Express. After connecting your AirPort Express to the router, open AirPort Utility (in /Applications/Utilities) and follow the steps

I have an AirPort Express, iPhone 5, and MacBook (late 2010). How do I see the graphical overview of my network?

I have an AirPort Express, iPhone 5, and MacBook (late 2010). How do I see the graphical overview of my network? (I can't seem to find a way to see it).
My computer is acting....well, strange. I can't put my finger on it but it doesn't seem right. Menus look skewed. Some applications look like they're trying to disguise themselves as apple (no consistant window formats). Airplay turns on and off on my devices on it's own. And some locked system preference seem to unlock themselves, or won't even grey-out after I lock them.
I have changed my password many times but the issue keeps coming back. I feel like I'm going crazy - but I know that something just isn't right...maybe someone's been hacking me? (I have no idea why...)
Anyway, maybe I could have stemmed from an improper setup of my wireless network.
Any thoughts?
Also, right now, when I just signed into apple communities....
     I have an iCloud email address that is accociated with my 1 and ONLY Apple ID...
     It seems to have been working but...
     When I loged in here it only saw my:
                              OLD MacBookPro
                              3 Old iPods
                              My new MacMini with OS X Sever (Server is currently turned off)
     Could my Apple ID be confusing my MacBook (which I'm currently using) as an old iPod or my old MacBookPro?
     I doesn't even see my iPad (1st generation), or my iPhone 5
     Also, the Mac App store is giving me the option to download Mountain Lion??? I already have version 10.8.3...
Can anyone perform an analysis on my account and computer? I have been to the Apple Store 6 seperate time and the problem was not resolved (after 6 COMPLETE hard drive wipes).
PLEASE HELP!

i guess you could put the aiport utility app on your iphone, click on the aiport express there, it will show you how many devices are connected to it and the mac addresses of those devices.

After updating my Time Capsule, I received this message on my Airport Express: This version of AirPort Utility doesn't support this base station." How can I fix this?

After updating my Time Capsule, I received this message on my Airport Express: This version of AirPort Utility doesn’t support this base station." How can I fix this?

Per chance is your AirPort Express an 802.11g model? If so, you will need to use AirPort Utility v5.6 to administer it. However, this version will not install under OS X Mountain Lion without a workaround.
The following is one of those workarounds:
Here are the basic steps to install version 5.6 under Mountain Lion using CharlesSoft's Pacifist:
If you haven't already download the AirPort Utility disk image file directly from Apple Support Download
Place the resultant AirPortUtility56.dmg file onto your Mac's Desktop.
Run Pacifist.
Click on the Open Package option. Find the disk image file that you just placed on your desktop, and then, click on Open.
The utility is located as follows: Contents of AirPortUtility56.dmg > Contents of AirPortUtility56.pkg > Contents of AirPortUtility56Lion.pkg > Applications > Utilities > AirPort Utility 5.6.app
Drag AirPort Utility 5.6.app to your Mac's /Applications/Utilities folder.
You can now run the AirPort Utility from the Utilities folder.

Itunes using Airport Express 802.11n and Remote app no longer staying connected

I'm running Windows 7. I find that my Remote app either keeps dropping Home Sharing (unless I toggle Home Sharing off/on in Itunes) or if it finds my library it cannot open it through the app. I can play music through my Airport, but it's the remote app that can't seem to connect with my iTunes. I should add that the remote app has the same breakdown on both my iphone 6 and ipad mini 2. So it's not the app, but some problem along the line (Airport express? router? Itunes?) Any suggestions?

OK, thanks for the info.
You'll need to jot down a setting that the AirPort Extreme (AEBS) is using in order to give the AirPort Express (AX).
Open AirPort Utility, select your AEBS and click Manual Setup
Click the Wireless tab below the row of icons
Jot down the setting that you see for Wireless Security
Close AirPort Utility
Hold in the reset button on the AirPort Express until you see the amber light begin to blink more quickly and then release.
Temporarily, position the AX near your AirPort Extreme and connect an ethernet cable from your computer to the AirPort Express
Open AirPort Utility, select the AX and click Manual Setup
Click the Base Station tab below the icons to name your device, establish a device password (write this down) and adjust time settings
Click the Wireless tab
Wireless Mode = Join a wireless network
Wireless Network Name = Exact same name as your AirPort Extreme wireless network
Enter a check mark next to Enable Ethernet clients
Wireless Security = Exact same setting as your AEBS that you wrote down
Wireless Password = Same password that your AEBS network is using
Confirm Password
Click Update at the lower right and the AX will restart. You can close AirPort Utility and disconnect the ethernet cable once you see the message that the settings have been saved to the AX.
After 30-45 seconds, you should have a green light on the AX. Now you can move the AX where it is needed and power it back up again. The ethernet port on the AX is enabled in this type of configuration, so you should be able to connect an ethernet device and connect. You may need to restart the device and/or the entire network to get everything synchronized.

How do I find a forgotten airport express base station in Airport utility.

I tried to add my airport express to my home network. I inadvertently clicked on "forget this base station" in airport utility. I cannot seem to get it back in airport utility. How do I find it again?

Hi,
This reply is for anyone who got this far but couldn't get further, becuase their setup was similiar and the above didn't work.
I have an Airport Extreme which I wanted to extend with a new Airport Express (2G). I first connected with a network lead and then decided I wanted to extend wirelessly so I could use the lead for my Samsung Smart TV - for Netflix. I clicked "forget" and then couldn't see the Airport Express to reconfigure it to extend my network wirelessly. Resetting the Airport Express is fine but it still doesn't appear in AirPort Utility.
You must switch ON Wi-Fi in System Prefs, Network. I didn't have it switched on because my Mac Mini is connected to the Airport Extreme with a network cable. The newly reset to Factory settings Airport is now available in AirPort Utility to select under the "Other AirPort Base Stations" button. Be careful of the default setting during setup. You do not want to use the AirPort Express instead of the AirPort Extreme (which sets the Extreme back to Default settings)
Connecting a New AirPort Express to a wired AirPort Extreme by first switching on Wi-Fi (which I wasn't using) was not intuitive. Remember to switch ON the Wi-Fi then switch it OFF after setup if you don't need it. And honestly one less thing in my living room broadcasting radio waves everywhere has got to be a good thing.

Airport Express not seen in Airport Utility! PleaseHelp!

Airport Express not seen in Airport Utility! PleaseHelp!
Changing Utility version did not help.
I have successfully used my Airport Express 802.11n A1264 (1st gen.) to stream my iTunes music wireless to my living room stereo. Lately my Airport Express looses connection after every restart and does not show in the Airport Utility.
I run 10.6.8 on a Quad core Mac Pro. up to date on al software updates per 10.6.8 I use a 3rd gen. Airport Extreme 802.11n.
W.W.

I actually did this by myself not into the computer but a secondary Ethernet port on myTripple play Fios modem.
The Express showed up right away. I did the reset and set it up in the utilities to join my existing wireless network. I don't remember all steps but at some point it asked me to put in internet info, I did not, and then it asked me if I wanted the amber flashing stoped so I could use it to stream music. I clicked yes and the set-up finished with a green light. After I disconected the Ethernet cable, plugged in the Express in my living room stereo wireless, it has been working normal since. I restarted a few times, green came right back.
James since you had the right idea I gave you the 10 points. Thank you for being helpful.
Walter

Airport Express is recognized in AirPort Utility but will not connect.

I just bought a brand new Airport Extreme from Best Buy yesterday and have it set up perfectly. However, now my Airport Express (that I use to stream music to my stereo via Airtunes) will not connect. I have reset the Airport Express many times and it still won't connect. Here is what is crazy... the Airport Express is recoginized within the AirPort Utility, however when I click 'Continue' I get this message:
"Warning: Are you sure you want to switch wireless networks? Setting up this Apple wireless device requires switching networks. Switching networks may interupt your connection to the Internet"
I click 'OK' and I get this message "Connecting To Network' Connecting to network 'Apple Network 08ded7'. Please wait..."
Than the message disappears and I stay on the same screen I started from (I don't advance to the next setup screen... repeat and it does the same thing.
I've disabled my firewalls and still no luck. Also, the Airport Express shows an Orange light both on the device and the AirPort Utility.
Anyone know what the deal may be?
Thanks in advance!!

Not sure why, but I installed the Airport Utility software on a differnt PC and was able to get the Airport Express configured and working just fine now. Hmmmmm...
So nice to have my music playing again - love Airtunes!

Problem with Airport Express (1st gen) and Mavericks?

Hello,
I still have an older 1st gen Airport Express (model A1264) and now with Mavericks it isn't working at all. The Airport Utility app on my Mac can't even find or connect with it. The same with the iOS app. It worked fine before. I can't even update the firmware (either no download available or other available downloads are too old and won't install). Is there a solution or do I need to update my whole device?
Thanks,
Paul

As a last resort, try a factory default reset on the AirPort Express as follows:
Power off the AirPort Express
Wait a minute
Hold in the reset button first, and keep holding it in for another 8-10 seconds while you simultaneously plug the Express back in to power
Release the reset button after the hold period and allow a full minute for the Express to restart to a slow, blinking amber light status
On an iPhone or iPad home screen....
Tap Settings
Tap WiFi
Look for a heading of Setup a New AirPort Base Station. If it appears.....
Tap on AirPort Express just below the heading to start the configuration process on the Express again
If you try several factory default resets, and the AirPort Express does not appear under the heading of Setup a New AirPort Base Station, the Express most likely is defective and will need to be replaced.

Hi i got a new airport express for christmas and i set it up as per instructions ,i even give a static ip and wpa2 security ..the problem is is when i come to want to use it it says its not on my network and a orange triangle shows .when i reboot it works

hi i got a new airport express for christmas and i set it up as per instructions ,i even give a static ip and wpa2 security ..the problem is is when i come to want to use it it says its not on my network and a orange triangle shows .when i reboot it works..then if i leave it a while and try iy agian its disapeared of my network...i have a bt hub 3 ....any help please ..im not sure if itsa faulty express

I really don't have an answer for that one. I guess that while trying to get things working correctly, I would use the most basic monitor I had which in your case would be the Eizon using the Thunderbolt port and adaptor.
When you boot into Safe Mode the startup is quite slow, but you should get the Apple logo and then the spinning gear below it (release the SHIFT key when it appears.) Then after a little more time you should see a gray progress bar appear below the spinning gear. When that disappears the computer will startup to a login screen.

How to set up and configure AirPort Express for AirPlay and iTunes

Saw somewhere that supposedly there were some apple written guidlines on the above topic. I have searched all over for them. Anyone know where I can get a copy to read through. Just trying to educate myself a bit and sety up another room with access to itunes, radio, etc with high quality speakers and amp off my express.

Here you go ...
How to set up and configure AirPort Express for AirPlay and iTunes

Airplay disrupts transmission with Airport Express 6.2 and OS X 10.8.3 Any fixes known?

Airplay disrupts transmission with Airport Express 6.2 and OS X 10.8.3 Any fixes known?

Looks like this is a known issue which has been fixed for Java 8:
https://javafx-jira.kenai.com/browse/RT-23328 "Mac: Impossible to use -splash:<image> with JavaFX 2.2 and JDK 7"

Airport express on lion and airport utility 5.6

Similar Messages

Maybe you are looking for