Airport express...pages not loading

ok, so i pucrahcsed a new air port express station for travelling overseas. i am currently in brazil for a month and trying to utilize the station. where i am staying they have dsl, but it comes to the house via telephone cord..not coaxial...so they have a special software on their windows computers with username and password etc....however, the station shows green as does my wireless menu showing full wireless capabilities...however the web pages do not load. any suggestions? am i going to run into this problem everywhere i travel?
thanks for the help
mac book pro Mac OS X (10.4.6)

mcialdella, Welcome to the discussion area!
Anytime that you have "special software" required to use an Internet connection you won't be able to use most (if not all) routers or base stations. These devices have no capability to run that software.
That is a pretty unique situation and won't plague you in most places (except maybe in Brazil).

Similar Messages

Airport Express will not talk to my router

I have 2 airport express stations that are 6.3 and they have always been able to connect to my qwest wireless router no prob. I've recently updated to Leopard and was surprised to see the new airport utility instead of the airport admin and airport setup tools. I like the new utility and interface as it seems less confusing than the old but now I'm having issues.
1. I can get the new utility to recognize my airport express ONLY when I do a hard reset to the airport express.
2. As I've done many times in the past, I go through the following setup protocol to join my current wireless network. I simply want to join my current network so I can talk to my stereo and printer wirelessly.
3. When I finish the setup and hit update, the airport utility updates the express successfully and then attempts to restart the express in order to join my network. This is where the problem lies.
*Here's the error message I get:*
AirPort Utility was unable to find your Apple wireless device after restarting.
The settings for this Apple wireless device have been successfully updated, but there was a problem re-joining the wireless network or finding the Apple wireless device. You may need to select your network from the AirPort menu and try again.
Now, I've tried repeating this process 10 times with both airport express stations and the same result happens? Remember, the only way for the utility to find the express is to hard reset the express. What gives? I bought both of these express stations over a year ago and they've been working fine til now. Because they are older and updated to 6.3, I shouldn't update them to the 802.11n7.3.1 update or should I? Is there something different about this new airport utility in Leopard that is causing the problem?
Like I said, I've done this exact same thing many times and its pretty straight forward but I'm stumped.
Anyone? Thanks in advance

I've got the solution! It took me some fair hours, though...
It seems the Airport Express can not handle the WEP-encryption properly, nor the 64 or the 128 bit versions. Here's how to work around it:
1) change your routers encryption to WPA2 with passkey (WPA-2-PSK). You may use the 10-digit code supplied with most routers or any of your own choice.
2) Change all wireless cards in your network to WPA2-PSK. It can take some time to figure it all out, but in the end you'll fix it. I had to download a new driver for my D-Link card DWL-G650 for instance.
3) Do the usual config thing with the Airport Express. Choose to connect to an existing network, apply the 10-digit passkey (be sure to choose the WPA2-PSK-option in the drop down-menu).
4) Off you go! Itunes will find the remote speakers, green lights all over and everybody turns happy...
/W

My new airport express does not connect my printer to my computer? My old airport did! then I updated to OS 10.9.2. How do I get it connected?

My new airport express does not connect my printer to my computer. The old airport did. I recently updated to OS 10.9.2. I have since bought a new
HP 6700 all in one wireless printer, got the latest Comcast router. None of which connect to my computer wirelessly. Which do I throw away the printer, router, or Mac? Help

Contact HP for support.
Explain that you are using a Mac, anticipate the inevitable groan, and wait patiently for their resident Mac expert to return from vacation.
Until then download and install its driver here: http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?product=5058338&cc=us&dlc=en &lc=en
Otherwise return the printer and purchase one from a company that visibly supports OS X. HP isn't on that list.

"Airport Express" is not compatible with this version of itunes

Hello- My itunes reports that my airport express is not compatible with this version of itunes. My ipod and iphone no longer sync with the device either. Any suggestions? Thanks!

Does anyone out there have any advice? I have had no success correcting this problem........

Pages not loading completely

I am seeing intermittent issues with web pages not loading completely, or taking a long time to load. Some times embedded images will not load. The page will often load, but the page loading icon in chrome will carry on spinning.
This is happening periodically and at various times of the day, but has been going on for a couple of weeks. The rest of the time, my broadband speeds are fine and very snappy, as normal.
I've restarted my router (homehub 3) several times.
This doesn't seem to be a general speed problem.
Using speedtest.net, i can see that my download speed is pretty consistent at just under 20mbps.
Using pingtest.net i see no packet loss, with good ping times.
Using the BT speedtest tool, my line speed to the house is around 23mbps, and my download speed is again around 20mbps.
This is effecting all devices attached to the router, both wired and wifi... both windows PC/laptops and ipad/iphone devices.
I am not sure where to look next, and am kind of dreading a conversation with BT helpdesk.
Any ideas?

Thanks... That's a long thread, and I am not going to pretend to understand all of it.
It seems to be similar issue, but I am seeing this any webiste, including this one, not just on a handful of specific sites.
If I understand the thread above correctly, that issue is with BT, and was apparantly fixed, although the most recent post suggests it has not been. And that if this is the same problem, I can't do anything to fix this myself, other than raise this BT?
Having played around a little more, I think I can see that this problem becomes more accute when i am jumping rapidly from one webpage to another in quick succession, until i get to the point where pages are just not loading anymore.

Web Pages not loading on Mobile Devices

Browsing web pages not working on mobile devices
I have bt inifinity 2, from my laptop and mac (with same wifi connection) webpages load no problem, from my android tablet and iphone (with same wifi connection) web pages not loading. On these devices I can load youtube videos, and apps have connections/load data, it seems to be limited just to browsing webpages.
I have tried changing ssid for the 2 channels, I have tried disabling wifi on the router, and using apple time capsule as the router, everything seems to result in the same problem, you cannot browse web pages on mobile devices.
previously i had adsl from bt and didnt have these issues.
Solved!
Go to Solution.

Try turning Smart Setup off.
http://bt.custhelp.com/app/answers/detail/a_id/44328/~/switching-smart-setup-on-and-off-on-the-bt-ho...
Devices where there are known to be problems include:
Some Apple devices including iPhone 5 and Apple TV
some Android smartphones
Xbox<
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

HT1515 my airport express in not detected?

my airport express in not detected by my airport utility, and i want to conected to the wi fi of an internet conection.

In order for AirPort Utility to be able to detect your AirPort Express you need to either be connected to the AirPort Express via WiFi or by connecting an ethernet cable from your computer to the Express.

Hi, The Airport Express does not work with iOS 7.0.4, I appreciate your help to resolve this event. Thank you,

Hi, The Airport Express does not work with iOS 7.0.4, I appreciate your help to resolve this event. Thank you,

Please locate the model number of the AirPort Express and post back that information.
The model number is located on the side of the AirPort Express. It begins with an "A" followed by four numbers.
We are not sure what you mean by "does not work". Does this mean that the AirPort Express worked at one time and has just recently stopped working?
Have you installed a newer operating system on your iOS device recently?
Or, is this a new AirPort Express that you are trying to configure for the first time?
If yes, what service will the AirPort Express perform on your network?
Please remember that we cannot see your network, so we only know as much about your problem as you can tell us.

Airport Express suddenly not extending

First, some technical info.
I am using a late model Airport Extreme with an early model Airport Express to extend my network. All has been working fine until recently. The Airport Express blinks amber and the utility says the connection is good but that the Base Station was unable to extend the network. I have not many any changes to either my Airport Extreme or the Airport Express. Have unplugged the Express and plugged it back in, but get the same result. What would cause it to suddenly drop off the network? Thoughts?

AMAZING!
Setup: AirPort Express extends Time Capsule both on 7.6.4
Symptom: Suddenly AirPort Express blinks and AirPort Utility says AirPort Express seems to have problem extending the network
Solution: Google "airport express not extending" and click link to "Airport Express suddenly not extending"
Problem solved in seconds!
PS: I wasted 5 minutes earlier when I pressed the reset button in my AirPort Express hardware and had to reconnect it to my internet connection as the extending network although the setup was very intuitively easy ( a very intelligent setup sequence all figured out by Apple ) ... then I read this !

Need Help...my wireless airport express will not work with my update of snow leopard

after installing snow leopard on my macbook pro my airport express will not work...or will connect only for a minute at a time.

If you mean by "airport express" the square airport router you plug in and has a usb port then run the Airport Utility located in your Utilities folder to set it up again. If AU doesn't see it you may need to do a re-set of the AE.

Home page not loading in some machines

I develop one site & released to the server but some
machine home page not loading.
We can see the message done only.
Is it possible to load the page without the Flash
Player.

"Shums Lafir" <[email protected]> wrote in
message
news:gp2brj$j56$[email protected]..
>I develop one site & released to the server but some
machine home page not
>loading.
> We can see the message done only.
> Is it possible to load the page without the Flash
Player.
You can include alternative content for people who do not
have the Flash
player. Essentially, you write the site twice--once in HTML
and once in
Flash/Flex. This is one reason why people will often advise
you not to put
mission-critical functionality into anything that requires
the Flash player,
unless you're 100% certain that all of the users who need to
see your
content will have it.

Airport express does not appear in Airport Utility

Hello,
I am having problems connecting my Airport Express to my network.
My configuration is all Apple. I am attempting to set up Airtunes. I have an Airport Extreme (software version 5.7) plus Airport Express. The Airport Extreme is hardwired to my Power Mac G5 (10.5.6) via ethernet. Wireless security is WEP 128 bit.
The Airport Express appears to establish a connection with no problems. The indicator light on the Express goes through normal start up and then a steady solid green.
Airport Utility shows the Airport Extreme but the Airport Express is not listed.
Any suggestions on how to make the connection are appreciated!
Thank you!

When having difficulties accessing the AirPort thru the AirPort Utility, try the following, in order checking accessibility with the AirPort Utility after each step:
o Check the local connection. If you are trying to access the AirPort wirelessly, make sure that you are connected to its wireless network before running the AirPort Utility to administer it. If you are still unable to access it with the utility, temporarily connect your computer directly using an Ethernet cable to one of the base station's LAN ports.
o Power cycle the base station. Remove the power adapter's plug from the power outlet, and then, wait 15 seconds before plugging it back in.
o Perform a "factory default" (AirPort Express) or "hard" (AirPort Extreme / Time Capsule) reset.

How do I set up my Airport Express and not interrupt my TIme Capsule

I have ATT UVerse recently installed and have my Time Capsule Router Behind their installed router. I recently purchased Airport Extreme and want to install it as well so I can connect an older Version of a Sony PS3 which doesn't have bluetooth capability via rj45 since the time capsule is no where close to my PS3. Is there a way to install this Airport Express and not mess up the settings of the Time Capsule?

Hello hbwilli. Welcome to the Apple Discussions!
I recently purchased Airport Extreme and want to install it as well so I can connect an older Version of a Sony PS3 which doesn't have bluetooth capability via rj45 since the time capsule is no where close to my PS3. Is there a way to install this Airport Express and not mess up the settings of the Time Capsule?
Yes. You will want to configure the new 802.11n AirPort Express Base Station (AXn) as a ProxySTA. In this configuration, the AXn will join the wireless network created by the Time Capsule and share Internet access through its Ethernet port to the PS3.
To activate ProxySTA, you must set up the Express to join a wireless network and then enable the Allow Ethernet Clients setting; both settings are located in the Wireless tab of AirPort Utility. The feature should work with any wireless network: a, b, g, or n; and 5GHz or 2.4GHz. (Note that the Express, which ships with firmware 7.3, must also be updated to firmware 7.3.1 for this feature to appear.)

AirPort Express will not extend Wireless Network

Hello. My airport express will not extend my wireless network. It was green for about the first 4 hours and then I've had a flashing yellow light since that time. I've reset it a bunch of times and even have the AE in the same room as my AP Extreme. I complete the setup and then it continues to flash yellow. Can ayone give me a hand?

In the cases where the AirPort base stations would be interconnected by Ethernet you want to configure then for a roaming network, NOT an extended network. Apple uses the term "extended" when the base stations use wireless connection. Regardless of naming convention the end results is pretty much the same.
The link I provided should provide you with the necessary steps to set this type of network up.
If you need additional help, please start a new post as the solution for you will be different than the OPs. Thx!

HT1145 internet pages not loading

internet pages not loading, though the Wi-Fi is on and working on other devices

Hi Satyazapple,
If you are having issues loading pages in Safari, you may find the following articles helpful:
Apple Support: Troubleshooting "A connection failure has occurred", "The specified server could not be found" or similar messages
http://support.apple.com/kb/ts1843
Safari 5.0.1 or later: Slow or partial webpage loading, or webpage cannot be found
http://support.apple.com/kb/ts3408
Regards,
- Brenden

My airport express is not recognizing an IP address. How can this be fixed?

My airport Express is not recognizing an IP address. How can this be fixed?

I would recommend that you do the following as a minimum:
Power-down the modem, AirPort base station, and computer(s).
While all of the devices are powered-down, perform a "factory default" reset on the base station. This will get it back to its "out-of-the-box" configuration and make setting it up much easier, especially if you use the "Assist me" process within the AirPort Utility. (ref: Resetting an AirPort Base Station or Time Capsule)
After the base station resets, go ahead and power it back down.
Power-up the modem; wait at least 10-15 minutes.
Power-up the base station; wait at least 5-10 minutes.
Power-up your computer(s).
In this basic configuration, computers connected to the base station, either by wire or wireless (as appropriate for the base station type), should now be able to access the Internet through the ISP's modem. Once Internet connectivity has been verified, you can use the AirPort Utility to configure the base station for wireless security and any other desired options.

Airport express...pages not loading

Similar Messages

Maybe you are looking for