Airport express setup with wireless n, g and b devices

Hi
I'm trying to determine the best way to configure my network. I have an Airport express N 1st generation connected to my cable modem. When I connect my computer directly to the cable modem via Ethernet I can achieve 50mbps down.10mbps up according to speedtest and comcasts tests. However, when I connect the airport express (using a free non occupied channel, wpa2 and default settings) to the modem and connect wirelessly on my computer (has a wireless n card) the speeds are greatly reduced to 5-10mbps down.
Here is a list of the other devices connected. It's my guess the wireless g and b devices are slowing down the network. Is there anything I can do to improve my speed or would a dual band router be the best course of action? I also have an old airport express G that I can use if possible (don't know if I can somehow route the slower traffic there)
iPhone 5
iPhone 4S
Apple TV (wireless n)
Ps3 (wireless g)
Roku (wireless b)
Dell laptop wireless n
Dell laptop wireless g
Thanks in advance

Thanks for clarifying that for me. If your goal is to use this second wireless network just for 802.11b/g devices, I would recommend using one of your older 802.11b/g AXs instead of the newer one. In addition (whichever AX you end up using), not only does it need to be connected by Ethernet, it should be reconfigured as a bridge. This will allow any wireless clients connected to it to gain Internet access from the AEBSn.
Another thing you will want to do is to make sure that its 2.4 GHz radio is operating on a radio channel that is at least 3-5 channels away from the 2.4 GHz radio on the AEBSn. This will prevent any type of Wi-Fi interference between them.
For the remaining AX & AXns, you can now go ahead and configure them to join the appropriate wireless network for streaming. I would suggest joining the AX to the AX providing the 802.11b/g network, and the AXns to join the AEBSn's wireless network.

Similar Messages

HT4137 iCloud setup with one Apple ID and multiple devices

iCloud setup with one Apple ID and multiple devices

What, exactly, are you trying to do? You can use the same iCloud account on as many devices as you want, as long as you don't turn on iTunes Match. Once you turn on Match, you're limited to 10 devices total.
Is this what you want to do...same iCloud account, but different iTunes/App store accounts on each device? If so, you can do that also.

Airport express setup with iPad and no computer -- possible?

In September I will be staying a week in Germany in an apartment that lacks wireless but does have a broadband LAN connection. I would prefer not to take my MacBook Pro and, instead, rely on my iPad 2. But there's the rub: no way to connect via ethernet. I do have an Airport Express I could take with me. Is there a way to use it, creating my own wireless network, without having a laptop with me and using Airport Utility to set it up? Or am I stuck with lugging my MacBook Pro?

Is there a way to use it, creating my own wireless network
What I do with my Airport Express is to configure it to create a wireless network using DHCP at home before I leave, and then wherever I am, I just plug it in to the network via ethernet cable and turn it on. The Airport Express will grab an IP address from the ethernet network and create its own network that you can connect to.
So far, that has worked for me everywhere I have been.
From reports it appears iOS 5 will have the ability to configure an Airport Express, but we don't know the release date of that.

Airport Express problems with new MAC MINI and DLINK router SOLVED

Hi just thought I would post this as it may well help others experiencing similar frustrations with new core duo mac mini and wireless connection or quality problems across the network / internet etc
I have a 3 week old, new mac mini core duo 1.8ghz 2gig ram, 120gb disk - First Mac, connecting to my exisiting wireless network via DLINK ADSL Router 2MB Broadband also one windows laptop and pc also wireless on the network and two airport express potins to stream itunes to
Problem was briefly
Mac worked fine, but the network connection just far too slow, laptop and pc, 1800+ kbps downstream mac mini 90 - 150kbps (http://www.adslguide.org/tools/speedtest.asp)
also if i ping the router directly from terminal (ping -c 20 192.168.1.1) average response 12+ ms with 20% packet loss, yet laptop and pc avg 2ms no losses
Spent 2 evenings on frustrating calls of more than 1 hour each (due to being cut off , then ring back and closed etc etc) and carrying out a the helpdesk troubleshooting (I am an IT consultant I think I am above this level), eventually an archive and install of the os as well
last night I call for the third time, insisting I dont wish to carry out any further troubleshooting, and want it replaced and resolved or my money back
I receive a call back from product specialist (not sure if thats mac mini specialist or airport) but we resolved the issue (his knowledge far superior to the help desk do this do this attitude)
between us we carried out the folowing and resolved the problem and I am now very happy
mac now downstreaming also in excess of 1800kbps (as expected for 2mb broadband)and no packet loss
This problem was resolved by switching off the turbo option hidden away in the routers settings, under wireless configuration
Supposed to improve performance, but its rubbish and will make hardly any difference under mac os to the speed but will certainly affect your mac mini performance(you may have a similar setting switched on in your routers and mac os dont like it)
We stumbled across this by first disconnecting one of the airport express devices from my dlink network, and using it on its own default apple wireless settings, effectively making it a standalone wireless network, and not via the dlink router
we then carried out the same ping with the ip address of this device (from airport admin utility default 10.0.1.1) and the results were fantastic 2ms avg no package loss
this established it was something with the router, and how we then interrogated the routers settings and found the turbo on option within wireless configuration
you may not be able to replicate this if you dont have an additional network you could join (such as airport express), but probably worth checking your own router settings for something similar
Hope that may be of assistance to others, sorry that its a bit long winded and garbled, but I'm just so excited to finally get my new mac working as i would expect it to
Also perhaps insist on speaking to a product specialist immediately that the helpdesk are unable to help you

Hello macfar14. Welcome to the Apple Discussions!
For just streaming iTunes and/or for sharing a USB printer, the AirPort Express Base Station (AX) just needs to be configured as a wireless client ... which you already attempted to do.
Just to be sure nothing was missed, here are the basic steps to do this:
Either connect to the AX's wireless network or connect directly, using an Ethernet cable, to the Ethernet port of the AX, and then using the AirPort Utility in "Manual Setup" mode, make the following changes:
AirPort > Wireless
o Wireless Mode: Join a wireless network
o Network Name: <existing wireless network's Network Name or SSID>
o Wireless Security: <select the encryption type of the existing wireless network>
o Wireless Password: <enter the existing wireless network password>
o Verify Password: <re-enter the existing wireless network password>
Music
o Enable AirTunes (checked)
o iTunes Speaker Name: <enter desired speaker name>
o iTunes Speaker Password: (optional)
o Verify Password: (optional)
o Click Update to write the new settings to the AX
In iTunes:
iTunes > Preferences... > Advanced > General
o Look for remote speakers connected with AirTunes (checked)

Can I disable my Verizon Fios Router Wireless radio, connect it to a switch and use my airport express as my wireless access point connected to an in wall ethernet port?

Here's the deal. I have a Verizon Fios MI424WR router. My house has CAT5 throughout the house. The media panel is located in the garage. I want to take the Verizon Fios Router and cannot it in the media panel so I can connect a switch to it, that way, all my CAT5 can fire throughout the house. Verizon being Verizon decided to connect the router directly in the office.
Can I go this route (Router in media panel, switch cross connect to it) and use Airport Express, connected to one of the in-wall CAT5 ports in my house and then set it up as my wireless access point to provide wifi to my portable devices (iPad, iPhone, Macbook)? Is this possible? Will Airport Express comminicate with my verizon router via ethernet in-wall? Do I have to turn off the wireless radio in the Verizon router? Any help would be greatly appreciated!

That is right, by hard wired I was just making clear wired vs wireless attachment. AirPort family of devices will only act in a repeater mode with their own family members, not FiOS routers. they have to be wired to work.
There are some useful docs you can download from Apple, Support, Manuals, Peripherals, AirPort (just follow thos links from the Support button on the top bar):
Apple AirPort Networks
Designing AirPort Networks
AirPort Express Setup Guide
The last has a diagram of what you are trying to do, though without the house wiring, etc., but the basic principle.

Anyone with a working TC - Airport Express setup out there?

Anyone with a working TC - Airport Express setup (wireless) out there?
My setup is super slow and has dropouts all the time!

I have an AEBS connected to my cable modem, TC connected wirelessly to the network. TC dropps the connection all the time (what a pain!). I also have 2 x 500Gb USB drives connected to the Tc via a USB hub. The interesting thing is if I have mounted both USB drives while the Tc connection is working, I don't los connection to the USBs, just the TC hard drive (TM won't backup because it can't see the TC hard drive). BTW, speed is definitely not an issue and I have "interference robustness" active as I have a cordless 2.4GHz phone.
Still working to troubleshoot and will keep you posted!

Airport Express slow on wireless and fast on ethernet

I have an airport extreme setup as a base.
I then created a network.
Through the house I have airport expresses setup to extend the range.
They are all setup as N with robustness.
When I connect my macbook pro to the airport express most near I get 24696 kb/s download. But when I connect to the airport express via wireless my download falls to less then 8000 kb/s.
I tried this with different airport express devices setup and each one acted the same way.
If I connect to the express with an Ethernet cable is it super fast.
When I connect to it wireless it drops to at least half speed.
The really odd part.. if I connect via wireless to the airport extreme I get FULL speed. So the extreme can sent out full speed but it seems the express has an issue with wireless speed.
Can anyone help?
I hate to see if you used this to extend wireless that it would have to travel through two or more express devices. I would be down to a 2400 baud modem speed.

I have the exact same problem down to the letter. Anye help out there?

Airport Express (Model with 802.11G +54MBPS Mac/PC and Set Up Issues

Hi,
We have a 4 Mac and 1 PC Household. Cable Internet Service by Roadrunner.Cable model (owned) connected to a D-Link 802.11G wi fi router (by ethernet from cable modem)in the family room , then out to a Imac (the half moon base and LCD screen with a airport card also in the family room and the closet computer to the D-Link
router, (we did add a D-Link antenna to the router ? about 10 months ago (a D-Link ANT24-0700 (Version 1.2)and a HP 4 in 1 printer attached via USB to the Imac
,a eMac 1.25 ghz 1Gb ram with airpot card also connected wirelessly (no printer attached on the same floor but in a ajoinging room about 20 feet from the Router, and another eMac 1.0 Ghz 1Gb ram with airport card in the upstairs part of our house (a bedroom) and no issue with Internet connection (it has a Epson 3in 1 printer attached via USB, and a MacBook Pro with 802.11N wireless card in side , bought for a Christmas/Birthday Present and also for college.It to has no issues with the Internet where ever it may be in the house. Our sole PC a HP tower with a added D-Link WDA -2320 Range Booster Desktop Adapter (802.11G) and we added a D-Link Antenna same model as the other a ANT24-0700 to help with Internet access which it did as well as adding some ram to increase page loading time etc. It does not have a printer attached. I will get to the Topic Area now
The Airport Express. I was not involved in the set-up as I was laid up due to a bad back and post major knee surgery , But I always (especially recently) wondered why the light was amber and blinking. I read through the manual and also
Apple.com support and MacFixit.com (which is under construction and moved to part of Cnet.com)and then went to the Airport Express Discussion area (sorry for being so wordy) I need a Twitter account to post!) We have a network name for the D-Link and the computers all were added and it also supports a Xbox 360, a Sony PlayStation 3 and a Nintendo Wi (in online use without issue) but..
A network was also as it appears to myself) for the Airport Express and under the half moon bars showing connection strenght (there is our D-Link network "phoenix" with security protection WPA2 I believe) as I have set up the router, We had a Apple Base station prior that was ? 802.11B (a half moon white unit) still have it in the box ) So for normal daily use, checking e-mail and internet use all of the computers use the "phoenix" or D-Link supported Router 802.11G
and The other network calld Apple Network with numbers and letters after it (and hopefully security) password is unknown , The Airport Express is set up connected via USB to a HP B&W laser printer which has saved quite a bit of money on ink, To utilize that printer you must switch from "phoenix" The D-Link router network to the Apple Network (followed by letters and numbers) The Imac and the eMac in the family room and a ajoing room (after switching to the Apple Network
can than print to the lasr printer. The eMac upstairs and the HP Windows XP Professional software can not print to the laser printer (yet the HP PC shows it as a individual network and a strong signal, equal to the Internet connection from the D-Link, and the eMac (after switching under the half moon (not the proper name I am sure) to get to the Apple Network to print , it will not print, yet it shows a 5 bar signal, same as the D-Link connection. I do believe we have two seperate networks (but do not understand why the two Mac's in the family room can print to the laser printer by simply switching networks and then file and print. ** One other 9probaly major item is that it states to set up the Airport Express with a Mac With OSX 10.4 or later (at the time of set up, we had the Imac and two eMac's all running Panther OSX 10.3.9 9which they continue to have installed) We obtained the HP Tower and Monitor and HP 4in 1 printer ust before Christmas in 2008 and the MacBook Pro in Mid December 2009 (current model and running Snow Leopard 10.6. The HP Tower runs Windows Xp Professional (Service Pack 3) so the MacBook Pro which is much more mobile , could be used to do the set-up, or the HP Tower coulf be moved temprarily, I do recall if Router changes (at least with The D-Link You need to be connected by Ethernet to the Mac
that would be doing the set up/configuration of the router (and it runs OSX 10.3.9 and is a older Mac (with 80Gb Hard drive that is partioned for OS9 and OSX as well , it is under a Ghz processor wise and less than 1 Gb of ram as the last ram slot required a seal to be broken and 256mb of ram (?) could be added
it has 768 mb of ram but knock on wood running well. We use Lacie external drives
on the Imac and both eMac's and need to get external drives for the HP PC as well as the Mac Book Pro (15" screen)
I apoogize if I repeated myself, and rambled but I wanted to (in one post) to explain our set up and network configuration
Questions
1) if indeed it is that the two networks is true and a set yp that is not correct
can the Airport Express be configured without opening up the router (when ever that happens it seems one computer is unable to get online and each time its a differnt one a Mac or veen the PC
The PC under My Computer and Networks clearly shows the wto distinct and seperate netwoks with strong signals and the distance is not far (it is through a floor as the other emac and the PC are upstairs and cabling by ethernet is not a option
2) If I need to open the router would I add the Airport Express as a client as if it was one of the computers or gaming systems on the network? (adding the Mac adress or IP address (not sure how you find the Mac address) and its been while since the router was opened up for any additions or work on it.
3) would it be on the same channel as the router or not ?
4) Hopefully with proper configuration the light will stay on (and green) on the A/E and the eMac and HP PC will be able to print to the laser printer. Currentlt
when anything needs printed from the PC its put on a Flasg Drive and plugged in tothe Imac and the the Apple Network is selected and data printed, The eMac upstairs has the option of using the attached Epson 3 in one or doing the Flash stick work around.
I would be verya appreciative if some one took a look at the set up above and advised me of what is right, what is not right* and what to do to fix things up
I would imagine after proper set up, delete the Apple Network from the PC and eMac upstairs and ? all of the computers as we should have one base station (the D-link and the spoke (the A/E connected by UBS to the A/E (it may be ethernet but the cable connection from the A/E to the HP laser printer is correct (the rest of the A/E set up ... Please , tell me where it is and where it should be
and ? any idea why we can print to the laser printer down stairs and not up stairs ? it did mention printer set up with Panther as possible, page 43 of themanual we have un chaper 5 Tips and Troubleshooting (under whn your printer isn't responding) (we do not have the interfereance listed in the manual,
our phones are land line, one 900 mghz and the others 5.8 ghz
It is possible to move the A/E and laser printer if that would help the two computers (desktops) upstairs) bt the distance is way less than 150 but their is a floor and ? duct work (metal ) but I think here is a place to stop typing and let some of the experts on the discussion forums take a look.
one lst note (as the lap top will be going off to college in the fall (runnning Snow Leopard, and the other 3 Mac's run Panther OSX 10.3.9 should the HP PC windows Xp Professional be the computer to set up the air port express and the Airport Utility proram installed & would this conflict with the current Router (set up by a Macc running OSX 10.3.9 (Panther) i.e (should both set ups be on the same computer?) but actually aThe D-Link is OSX10.3.9 compatible (and 802.11G) and set up requires ethernet connection to a Mac (You type in the numbers and . etc and password as administror and you are in, or should the admin be on the same cpmpuer for the router and A/E ?
(and considering a Airport Extreme Base Station as well as dual frequency simulataneus and 802.11N (for the laptop now) and future, or wait. The 802.11
in theory would broadcast farther..?? even if computers had 802.11b(our Mac Desk tops and the PC 802.11B card
Thanks Again!!!
Many, Many Thanks
amnienttales

William Boyd Jr.
Hello again,
D-Link Router is model DGL-4300 (along with a D-Link ANT24-0700 Omnidirectional
7dbi Antenna . Our Cable Internet ISP (Roadrunner) provides consumers with dynamic ISP address's . All Mac's have Airport Cards and The Hp Tower XW4550 has a D-Link Rangebooster G Desktop Adapter WDA-2320 (also with a D-Link ANT24-0700 Omnidirectional 7 dbi Antenna (the PC OS is Win XP Pro Service Pack 3) The 3 desktop Mac's run OSX Panther 10.3.9 , The 15" MacBook Pro OS is OSX 10.6 Snow
Leopard (not sure what is after the .6 (right now) D-Link's website is
http://www.dlink.com , I have configured this router multiple times in the past.
also added as clients on the network (Utilizing the D-Link Router) are a X-Box 360, Sony Play Station PS3, and a Nintendo Wii all of which have on line ability
and enables online video game play with any one online.
As mentioned prior the Airport Port Express is Model A1084 Part No. M9447OLL/A
which is USB conected to a HP LaseJet B&W , model 1020 and some how the two computers near it can switch to the Airport Express Network from the D-Link Router based Network and print wirelessly to the A/E connected LaserJetPrinter
I realize I will need to reconfigure the D-Link Router and add the A/E as a client. I will try first to use the Airport Utility and see if I can do anything
Utilizing it (adding it to the D-Link network, I think its unlikely but worth a try but* the password is unknown but I have a few guess's as to what it may be.
I do have the necessary admin and network paswwords to cconfigure the D-Link Router,
1) * If the the A/E Utility experiment fails and I need to re-configure the router * do I need to (as per the Airport Express Set Up Guide (Use a Mac with OSX 10.4 or later or a PC with Win Xp Home or Professional (have a desk top PC that has the specs) and The Mac Book Pro meets the Mac Spec's)
If I can not get a password to work on the A/E I would reset it using the reset button
And before plugging in the A/E , connect the appropraite cables in our case a USB cable to the LaserJet Printer then plug in the A/E
2) I would then connect by Ethernet from Either the Mac Laptop or The PC to the D-Link router (if not the router will not set-up correctly)
3) The one question that puzzles me is that we are not using the A/E as a base
but a client
in two sections(Using Airport Express , connecting a Printer via USB
and use Airprt Utility to create a new network or join a new newWireless computers using Mac OSX 10.2.7 (Tiger) or later or a PC with Windows XP and it then goes in to the steps of ising the printer for both a Mac and a PC (using Bonjour on the CD that came with the A/E (this appears to contradict needing to use Mac OSx 10.4 or a PC with Win Xp set the A/E up for use as a printer
(joiing a new network or existig one)
And in Chapter 5 Tips and Roubleshooting= Your Airport Express Status Light Flashes amber & Your Printer is not responding (it is flashing amber and the printer does not respond to the two computers upsstairs (one Mac running OSX 10.3.9 & One PC running WinXp and its states to make sure the printer is selected
in the Printer list o client computers, to do this on a Mac using OSX 10.3 or later , open Printer Set Up Utility and follow steps and if a PC with Windows XP , Open Printers and faxes and then follow steps
in Closing ? can I configure the A/E Utility with a Mac using 10.3.9 as above or
? Per Chapter 1 Getting Started use a Mac with OSX 10.4 or later or a PC with Windows Xp Home or Professional
Perhaps I am taking the tips and trouble shooting and Printer Set up out of context or does the getting Started Computer specs contradict them or are they
for use if the A/E was going to be a Base Station and not a client..
Will keep at it,
ambienttales

Hi..I have an AirPort Extreme base connected to my DSL Modem and has been working fine. But I recently bought another DSL modem along with the latest Airport Express. With this one however I can't get it to connect to the Internet. Any suggestions?

Hi..I have an AirPort Extreme base connected to my DSL Modem and has been working fine. But I recently bought another DSL modem along with the latest Airport Express. With this one however I can't get it to connect to the Internet. The light on the Express is flashing green though. Does it mean I have to re-set the settings on Airport Utility? I.e. the old settings haven't been cleared yet. Any suggestions?

Let's see if I can get this straight.
You have an Airport Extreme base station that is set to "Create a wireless network" and you have the box checked for "allow this network to be extended"....
Then you have an Airport Express that is set to "Extend a wireless network" which you selected the name of your network in the box...
Correct?
See this Apple document:
http://support.apple.com/kb/HT4259?viewlocale=en_US&locale=en_US
The wireless unit on the right of the diagram can be either of the newer Apple base stations.
Extreme, Express, Time Capsule

I have tryed to connect an AirPort Express to my wireless network. But I alwais get the errocode -4. Can anybody help. I have reset the AirPort Express and updated the software.

I have tryed to connect an AirPort Express to my wireless network. But I alwais get the errocode -4. Can anybody help. I have reset the AirPort Express and updated the software.

The ZyXEL P-2601HN-F1, as you know, is a combination DSL modem & 802.11n wireless router (or gateway device).
For your goal you will want to take a look at this Apple Support article for details on how to configure an AX for iTunes.
If you are still having difficulties with the AX joining the ZyXEL's wireless network, you can try the following:
Temporarily disable wireless encryption.
If you are hidding the SSID, disable that feature.
Change the Mode Select setting to: 802.11g Only
Change the Channel Selection from "Auto" to a set channel, like 1, 6, or 11

Airport Express Conflicts with Clear Wireless Network?

After months of stumbling around, trying to figure out why my Clear Wireless internet service was so choppy, I finally plugged the ethernet cable directly into my computer, and disabled my local Airport network. Voila! Works like a charm -- very fast and reliable, now. Trouble is, I don't have network access for my laptop. The problem (I suspect) is that I also have phone service on my Clear modem.
Here's what the connection looked like (and was recommended by Clear Wireless), with <-> meaning wireless connection and <+> meaning an ethernet connection:
computer(s) <-> Airport Express <+> Linksys Phone Box <+> Clear Modem <-> Clear Tower
So, pulling the Airport Express out of this sequence cleared up ALL of the stalling problems and slowness. My new (and functioning) set up looks like this:
computer <+> Linksys Phone Box <+> Clear Modem <-> Clear Tower
My question is whether I can have somehow connect the Airport Express on the other side of my computer, and allow my local network access the Clear Wireless modem via my computer? Right now, I've got the Airport Express plugged in and running, mostly to check if there was simply an interference problem, and that doesn't seem to be the case (the phone connection is a base station with wireless handsets, so thought there might be interference there -- doesn't seem to have been an issue).
Any advice on this would be great. Clear Wireless is as clueless on technical support as it is brilliant in concept. Still very much in startup mode, with phone operators reading from generic scripts and masses of angry users spamming their discussion board -- ugh! Thus my post here. I'd love to see a schematic that shows the optimal way to bring a phone connection into a local wifi network.
Thanks!

What I would like to do is to connect the airport express to the wireless network (Linksys-router).
What are you trying to do with the AirPort Express Base Station (AX)? Use it for streaming iTunes and/or share a USB printer, or extend your existing Linksys wireless network?

Airport Express connection with my wireless network

Hi
I have tried to install my Airport Express, which was okay, but doing so I had to disconnect my wireless network.
What I would like to do is to connect the airport express to the wireless network (Linksys-router). I tried to choose the "Join an existing wireless network" in the admin utility, but now I have lost contact with my airport express base station.
Please help me....
BR Morten
IBM Thinkpad T43 Windows XP Pro

What I would like to do is to connect the airport express to the wireless network (Linksys-router).
What are you trying to do with the AirPort Express Base Station (AX)? Use it for streaming iTunes and/or share a USB printer, or extend your existing Linksys wireless network?

Airport Express as a Wireless Bridge and AirTunes?

I have a linksys router and just got a Tivo I was thinking of getting the Tivo wireless adapter but after much though i had a brainstorm
What if i were go get an express and hook it up as a wireless bridge (connect the Tivo to the ethernet port) and while i am at it connect my computer to my stereo system via AirTunes.
Is it possible to use the Airport Express as a wireless bridge and use airtunes at the same time while using my linksys router?

To do this, you must use WDS. Very, very, very few 3rd party devices are compatible with Apple's WDS.
The Linksys WRT54G or WRT54GS (not latest versions v5) however are compatible with Apple's WDS. If you have one of those, it is possible.

Will airport express work with 3G wirelessly without access to Y Fi connection ? (usinmg an iPad )

I do not have wi Fi at work. Will airport express work with just the 3G on my Ipad2?

In addition to Keith's comments, if you are asking if the iPad can configure an Apple router like the AirPort Express, the answer would be yes, if you download and install AirPort Utility from the App Store. It's free.
I'm assuming that you have a newer version of the Express. Check the Model No on the side of the device. It needs to be A1264.
http://itunes.apple.com/us/app/airport-utility/id427276530
if you do not have an Ethernet Internet connection to connect to the Ethernet port on the Express, you can still use the Express to "Create a wireless network", but of course devices will not be able to connect to the Internet. The Express will complain, but you can ignore the error messages.
If your printer is wireless, hopefully it is an AirPrint compatible printer. Then you would be able to print from the iPad. Check this Apple Support document for information about compatible printers. There might be other applications that would allow this as well. Check Keith's post for that info.
http://support.apple.com/kb/HT4356
I'm still not clear on exactly what you are trying to do, and devices that you have, so if you can state your goals again....we can make sure that we are not missing something.

Can't connect (wireless) to my Airport Express anymore with iBook, iPad or iPhone.

Can't connect (wireless) to my Airport Express anymore with iBook, iPad or iPhone. It still recognizes the printer on the iBook (bonjour), but not on my Windows notebook (work). The only device that still connects via wireless is the PlayStation 3.

The latest firmupdate solved the issue.

Airport express setup with wireless n, g and b devices

Similar Messages

Maybe you are looking for