Airport Express slow on wireless and fast on ethernet

I have an airport extreme setup as a base.
I then created a network.
Through the house I have airport expresses setup to extend the range.
They are all setup as N with robustness.
When I connect my macbook pro to the airport express most near I get 24696 kb/s download. But when I connect to the airport express via wireless my download falls to less then 8000 kb/s.
I tried this with different airport express devices setup and each one acted the same way.
If I connect to the express with an Ethernet cable is it super fast.
When I connect to it wireless it drops to at least half speed.
The really odd part.. if I connect via wireless to the airport extreme I get FULL speed. So the extreme can sent out full speed but it seems the express has an issue with wireless speed.
Can anyone help?
I hate to see if you used this to extend wireless that it would have to travel through two or more express devices. I would be down to a 2400 baud modem speed.

I have the exact same problem down to the letter. Anye help out there?

Similar Messages

Can AirPort Express connect a wireless and a non-wireless at the same time

Hello everyone,
I have both a PowerBook G4 with wireless card, and a 17 inch iMac G4. Is there a way to connect both of them to the internet using the airport express?? can the PB access via wireless and the iMac via the usb port perhaps?? right now I connect the non-wireless directly to the broadband modem using ethernet.any pointers will be really appreciated!!
Thanks

If you have a single Airport Express then the answer is no.
The USB port is for printing only.
iFelix

Can't See Airport Express on my Wireless N/work

I have a D-Link DSL G604t router, and have spent hours trying to get it to "see" AE - no joy. I have added the MAC Address to the enabled access list but still nothing - everytime I scan for it, it cannot be found. My Compaq l/top connects no problem to the network, and I cannot find any answers in the manual. Only trying to send itunes to my hifi - don't need to share connections or printers.
Dell Optiplex Windows XP Pro

Hi:
I had a similar problem with a DLink DI-624 wireless router and AirPort Express afew months ago. Here is what you can do.
As an intermediate step, which is undocumented but I found necessary, connect your Airport Express to the wireless router via an Ethernet cable. After the wired connection, your router will definitely see AirPort Express. Then you can go through the normal network registration process. Once this is complete, you can then power off Airport Express and disconnect it from the router and then place it where you originally intended. Once the solid green light comes on (30-60 seconds), you should be able to access AirPort Express the way it was intended, in a wireless manner.
Again, this worked for me after hours of unsuccessful struggling with the installation process as described in the Apple documentation. I hope this helps.
Lawrence

How do I use the airport express to connect a remote PC via ethernet cable and access the internet via wireless connection, How do I use the airport express to connect a remote PC via ethernet cable and access the internet via wireless connection

Trying to connect my xbox to the airport express. Have wireless in home and do not have a ethernet point behind tv/xbox. How do I configure the airport express to connect to my wireless network and then the airport express can use its connection via ethernet to connect the xbox to the internet.

Is your AirPort Express Base Station (AX) a 802.11n model? If it is, you can reconfigure it as a wireless Ethernet bridge or ProxySTA. This would allow the AX to join another wireless network and have its Ethernet port enabled for wired clients, like the Xbox 360.
To activate ProxySTA, you must set up the Express to join a wireless network and then enable the Allow Ethernet Clients setting; both settings are located in the Wireless tab of AirPort Utility.

Can I disable my Verizon Fios Router Wireless radio, connect it to a switch and use my airport express as my wireless access point connected to an in wall ethernet port?

Here's the deal. I have a Verizon Fios MI424WR router. My house has CAT5 throughout the house. The media panel is located in the garage. I want to take the Verizon Fios Router and cannot it in the media panel so I can connect a switch to it, that way, all my CAT5 can fire throughout the house. Verizon being Verizon decided to connect the router directly in the office.
Can I go this route (Router in media panel, switch cross connect to it) and use Airport Express, connected to one of the in-wall CAT5 ports in my house and then set it up as my wireless access point to provide wifi to my portable devices (iPad, iPhone, Macbook)? Is this possible? Will Airport Express comminicate with my verizon router via ethernet in-wall? Do I have to turn off the wireless radio in the Verizon router? Any help would be greatly appreciated!

That is right, by hard wired I was just making clear wired vs wireless attachment. AirPort family of devices will only act in a repeater mode with their own family members, not FiOS routers. they have to be wired to work.
There are some useful docs you can download from Apple, Support, Manuals, Peripherals, AirPort (just follow thos links from the Support button on the top bar):
Apple AirPort Networks
Designing AirPort Networks
AirPort Express Setup Guide
The last has a diagram of what you are trying to do, though without the house wiring, etc., but the basic principle.

I have tryed to connect an AirPort Express to my wireless network. But I alwais get the errocode -4. Can anybody help. I have reset the AirPort Express and updated the software.

I have tryed to connect an AirPort Express to my wireless network. But I alwais get the errocode -4. Can anybody help. I have reset the AirPort Express and updated the software.

The ZyXEL P-2601HN-F1, as you know, is a combination DSL modem & 802.11n wireless router (or gateway device).
For your goal you will want to take a look at this Apple Support article for details on how to configure an AX for iTunes.
If you are still having difficulties with the AX joining the ZyXEL's wireless network, you can try the following:
Temporarily disable wireless encryption.
If you are hidding the SSID, disable that feature.
Change the Mode Select setting to: 802.11g Only
Change the Channel Selection from "Auto" to a set channel, like 1, 6, or 11

Airport Express as a Wireless Bridge and AirTunes?

I have a linksys router and just got a Tivo I was thinking of getting the Tivo wireless adapter but after much though i had a brainstorm
What if i were go get an express and hook it up as a wireless bridge (connect the Tivo to the ethernet port) and while i am at it connect my computer to my stereo system via AirTunes.
Is it possible to use the Airport Express as a wireless bridge and use airtunes at the same time while using my linksys router?

To do this, you must use WDS. Very, very, very few 3rd party devices are compatible with Apple's WDS.
The Linksys WRT54G or WRT54GS (not latest versions v5) however are compatible with Apple's WDS. If you have one of those, it is possible.

Airport Express questions on wireless print serving

I have a wireless network setup using a linksys router and thinking about using an Airport Express as a wireless print server in another room. I currently have a Canon MP500, 2 wired PCs connected to the router and 2 wireless laptops one Windows and an iBook. Would the Airport Express connect to my existing wireless network to act as a wireless print server for my network?
Thank you
PCs running Windows XP Pro and iBook is running OS X Tiger

Hi, does anyone know how to change the port setting on Windows XP Pro. I recently purchased an Airport extreme and the network is working great, however when I tried to set up the printer the documentation left some key peices of information out.
I had followed the step for installing a printer, but when I got to the point about specifing the adapter type, the documentation in the manual that came with the Airport skipped over that part. I guessed at the adapter and unfortunatly (and obviously after reading the instructions here http://www.ifelix.co.uk/tech/1008.html) I chose the wrong adapter. Now I want to go back and fix it but I can't figure out how. When I tried to run the add printer wizard again and the port setting wizard it said the port (IP_10.0.1.1) was alread in use and kicked me out of the wizard.
How do I change the settings on the port to the correct settings?
Thanks
Dell laptop Windows XP Pro

Airport Express 801.11b/g and the neverending, unconfigurable blinking amber light

Gather round and let me tell you a tale. Once upon a time I bought an airport express 801.11b/g and I was very happy to use it for airtunes, extending a wi-fi network and the wireless printing capabilities. One day, it beagn flashing a scaaaary amber light. The base station stopped showing up in my airport utility 5.6 as well. The only way to get it to show up, was to hard reset it, and lose all the configurations I once enjoyed happily. After the hard reset, It would show up in the utility, and I would reconfigure it to do all its cool things it once did, and it would restart. But sadly, after restarting the blinking amber light came on a again. It would also not show up in the utility unless I hard reset it again, and the same thing happened over and over and over until I felt like pulling my hair out.
I decided to get another airport express a few months later, ultimately deciding that the unit must have just been defective. Bad luck. But - the second unit literally went through the SAME EXACT THING. Worked for a while, then onto the blinking amber light- hard reset- reconfigure-blinking amber light thing. Over and over and over. Just like the first one. The end.
So - either Im missing something totally fundamental or I had the misfortune of getting two defective units in a row. Both were bought used from different places, and worked "fine" for previous owners. Am I corrupting these things or what?
I have spent literally hours trying all the resets, configuring "workarounds" and nothing works. For both of them.
What do I do with these two devices? I don't need two shiny white paperweights.
Please advise,
Thanks.

Yes. It seems an integral part of the set up process though, you don't have to seperately configure the airport do you?
My wireless security is WPA/WPA2 Personal. When I go through the standard network set up, it automatically enters my wireless security settings. So it doesn't really seem to give an option to specifically set that option on the airport if that makes sense?
I did go through maunual mode to try that with the same result:
If I'm using the airports own network and connect to the wifi, no security, then I'm getting airtunes from my macbook. Of course this means it's plugged into my router via ethernet which isn't any use to me as I want it in my kitchen, and would rather not limit my apple devices to b/g when I have a decent N router, and would also mean running a huge ethernet cable across my house!
The seller has said it worked for him but he's not up to scratch on his tech, so if I'm sure it's malfunctioning he'll refund. Obviously this is great news and he seems like a very nice guy so I want to be certain it's not me malfunctioning before I send it back!
So in summary I have it functioning on it's OWN network:
Wireless mode: Create a wireless network
Wireless network name: Apple Network XXXXXX
etc
Once 'wireless mode' is switched from 'create a wireless network' to 'join a wireless network' I select my current WiFi, security and password, checked the TCP/IP settings all good. Select 'Update'. Get the warning that device and network will be temporarily unavailable am I sure I want to continue. Then it goes through the same as before, says it's succesful, restarts to flashing amber with no way of accessing it unless I hard reset.
Thanks for the help so far...

I cannot get my Airport Express to accept wireless clients.

I cannot get my Airport Express to accept wireless clients. After resetting to factory default and reconfiguring, it works briefly but then stops again.
The Airport Express is on the second floor of my house and is seen by Airport Utility. Using a LAN cable with the Express works no problem.
My network is created by an Airport Extreme (ground floor) and extended by a Time Capsule (first floor)
Have run through all settings repeatedly and as I said I can get it to work briefly by resetting and then reconfiguring, but after a short while again my iOS devices can no longer connect and revert to cellular.

I cannot get my Airport Express to accept wireless clients. After resetting to factory default and reconfiguring, it works briefly but then stops again.
The Airport Express is on the second floor of my house and is seen by Airport Utility. Using a LAN cable with the Express works no problem.
My network is created by an Airport Extreme (ground floor) and extended by a Time Capsule (first floor)
The issue is most likely due to the fact that the AirPort Express may be too far from the AirPort Extreme to properly extend it with enough bandwidth to be useful.
It is important to understand that with Apple 802.11n or 802.11ac base station an extended network works in a wheel-like fashion with the base station to be extended at the hub and each extending base station along one of the spokes. This type of configuration does not allow for daisy chaining the base stations. That is, in your case, both the Time Capsule and AirPort Express are attempting to extend the AirPort Extreme.
Each extending base station must be within a certain signal quality range in order to extend the network properly. Please check out the following AirPort User tip for details.

Trying to connect my wired PC to the wireless airport express via the wireless router.

Trying to connect my wired PC to the wireless airport express via the wireless router. TP-link wired/wireless router. Ultimate goal is to send music from iTunes on PC to wireless router, then to airport, then to reciever. The amber light is blinking. Thanks in advance for the help!

If I'm understanding right your need and your computer has wired access to your network/router, all you have to do is give your AX wireless or wired access to your network too.
Wired should be easier. Just use a network cable to connect to the router. Power up the AX and look for it on AirPort Utility, do so without changing any of your computer settings. If it's visible, then on iTunes your AX should be visible on the AirPlay icon at the bottom-right corner.
If you want to connect your AX to your router wirelessly I would suggest to reset your AX settings by pressing and holding for a few secs the reset button next to all the ports. Once it is reset, using your computer try to look for the wireless network it'll be creating, it should be something like Apple Network 4341eb. Join that network and, using the AirPort Utility, configure your AX as a network client. Go to Wireless > Wireless Mode: Join a wireless network.
Select your router wireless network from the drop-down menu, select the appropriate security and type in your password. Click update.
It'll restart and automatically join your network. Have your computer join back your router network and, again, in iTunes bottom right you should be able to see the AX speakers.
Let me know if this worked.
Jorge...

My Apple Airport Express is blinking Amber and I cannot find it with the utility

My Apple Airport Express is blinking Amber and I cannot find it with the utility

Hi, had the same problem -
1) Connected AE to Time Capsule with Ethernet cable - Configured it - All worked fine
2) Removed Ethernet cable between AE og TC - All worked fine
3) Unpluged my AE from the socket outlet (power off) and pluged it inn where its supposed to be (2m from my Time Capsule)
4) Now Airport Utility do not find me AE (after all i reconfigured through the Etheret calbe) ????
A) Seems that Airport Utility are not able to "see" any wireless AE, only configurable by Ethernet Cable.
B) Seems that AE are not able to reconnect to configured network after a power loss.
This is a little bit ****** - older airport utility had none of the problems (A and B)

HT1515 does airport express replaces any wireless router ?

can airport express act as wireless router ? connect directly to your cable or DSL modem and get wifi access ?

can airport express act as wireless router ?
This AirPort Express is a wireless router.
connect directly to your cable or DSL modem and get wifi access ?
Yes

I have 3 airport express units, an Ipod and a PC. I used the PC to set up an airTunes and the AirUtility can see all three of the airexpresses. The Ipod displays all of the airexpresses and I can pick any one to stream music to. PC won't - any ideas?

I have 3 airport express units, an Ipod and a Windows 7 PC. I used the PC to set up an iTunes/airTunes and the AirUtility can see all three of the expresses. The Ipod displays all of the expresses and I can pick any one to stream music to. The PC won't - any ideas? AirUtility tells me the 7.5.2 version of the firmware is the latest for the expresses and ITunes is also reporting that there are no upgrades available. I get an error code -15000 when I try to connect from the PC to one of the expresses.

How do I configure the AX to connect to the hub's wireless network? It will only scan one base station Airport Express at a time in the Airport Utility. I think what I am trying to do is use the hub as a router to the two AX's. Is there a specific way to set this up?
To set up the AX to join a wireless network as a "Wireless Client," using the AirPort Utility, either connect to the AX's wireless network or temporarily connect your computer directly (using an Ethernet cable) to the Ethernet port of the AX, and then, try these settings:
Launch the AirPort Utility.
Select the AX.
If not already connected to the AX's wireless network, go ahead and switch to it when prompted.
AirPort Utility > Select the AX > Manual Setup > AirPort > Wireless
Wireless Mode: Join a wireless network
Network Name: <type in the network name/SSID of the wireless network that you want to join or select it from the pop-up menu>
Wireless Security: None OR, if you are using security on your wireless network:
Wireless Security: <Select the appropriate level of security for the existing wireless network: WPA/WPA2 Personal | WPA2 Personal>
Password: <enter your wireless network security password>
Verify Password: <re-enter the same security password>
Click Update to write the new settings to the AX.

No sound on Airport Express (via iTunes wireless link)

I have Airport Express base station directly connected to the Alcatel 510 ADSL modem. My Toshiba Notebook is using wireless connection to the Airport Express to access Internet, which is working fine.
Using iTunes I can listen to the music on Notebook, but when I choose the remote audio system connected to the Airport Express there is no sound.
On the Music tab (Admin Utility) I have:
- YES Enable AirTunes on this station
- NO Enable AirTunes over ethernet (changing this to yes makes no difference)
- iTunes Speaker Name: Roland
- Password has been assgned to the speakers
There is no WDS.
My first question is this set-up viable (Airport Express providing internet connection and beeing a iTunes client at the same time)?
What does the "Enable AirTunes over ethernet" setting means?
I have windows XP SP2 - are there any ports that should be open in the firewall (iTunes is listed in exceptions list), and how to do that?
I am using optical cable.
Robert

Well it was cable. When I changed from optical to RCA cable (bost from Monster pack) it started to work.
Robert

Airport Express slow on wireless and fast on ethernet

Similar Messages

Maybe you are looking for