AirPort Express Slowing Connection

I am experiencing a significant slow down using AirPort as my WiFi Router. I have Time Warner Cable Ultimate 100 as my internet package, running through a Motorola SB6141 and speed tests clock my connection between 85 and 97 Mbps when I'm hardwired. If I try to go wireless, (running through an early 2014 Airport Express with 7.6.4 firmware), I am cut down to 11 - 15 Mbps. From time to time, I can get up to 18 Mbps. What's going on? I was getting these same speeds when I was on their Turbo package (Up to 20 Mbps), but I upgraded because 4 laptops, 2 tablets, 4 smartphones, a Smart TV, and a PS3 were seriously leaching the system. With no significant difference, it's pointless for me to pay the extra cost every month.
Am I going to have to upgrade to the Extreme? I thought the Express would have higher speeds than this...

The ethernet cable is coming from my express
OK, thanks for clarifying that for me. This confirms that the wired, or Ethernet portion of the AirPort Express is working correctly.
If the wireless radio on the Express is functioning correctly, then you should be able to get something in the range of 85-90 Mbps over wireless on either the 2.4 GHz or 5 GHz band.
BTW, these tests were conducted with only my MBP connected to the network, while it was sitting mere inches from theExpress.
That is much too close, since the signal can easily overload the wireless card on your computer, which will have the effect of knocking the speeds down.  Move the computer 7-10 feet, or about 2-3 meters away from the AirPort Express with clear line-of-sight between the computer and Express and run the checks again.
Be sure to restart both the AirPort Express and your computer before you run the checks.
If the wireless speeds still clock in low.......anything below 60-70 Mbps......then I would start to look around for any devices that might be introducing wireless interference on your wireless network. The biggest culprits are cordless phones in this regard, but any BlueTooth devices like a mouse or keyboard can sometimes create issues, as well as wireless camera/security systems. Turn off these devices temporarily as a test and restart the AirPort an computer again to see if the speeds will improve.
If speeds are still slow during your "test", then I would try a Factory Default Reset on the Express.
If still no improvement, you need to take the Express to an Apple Store....if you have one near you, or an Apple Servicer to let them take a look and run some tests.
If the wireless speeds are still low when you do this, then the Express is defective and will need to be replaced.
However, if the Express checks out OK, then you know that something is affecting your wireless signal at the house.  What that might be will be the real question.

Similar Messages

  • 3 Floors two AirPort Expresses - slower connection

    I have an airport extreme downstairs. When i connect to in the same room I get a strong signal. When I connect via an airport express that see's the airport extreme, i get a slower internet speed. Then when I connect to a third floor airport axpress that sees the 2nd floor airport express, the signal slows even more. My question is will a Dr Bot External Antenna boost the signal to help maybe eliminate the second floor airport express?
    Thanks

    Most people's experience with the Dr Bot external antennas, as reported in these discussion forums, has been disappointing.
    Incidentally, the reduced data rate you have noted when connecting via a relay or remote base station is entirely expected.

  • AirPort Express - Slow connection speed

    Hi!
    I just setup my AirPort Express station in my dorm room. I use a Acer Aspire 2010 laptop(Might add I've never had any issues connecting to wireless network, infact I use one every day at home and at school with flawless speeds). I started by having the AirPort on the floor under a wooden desk surrounded by wires and other plugs. I installed the newest Firmware updates for it, 5.7 I think, and installed the Setup Assistant and downloaded a Windows XP update for the WEP access. I setup the AE and connected to it using a 128bit encrypted password, 13 characters in length. Put my computer 3 feet away from the AirPort.
    All worked perfectly and I had Excellent connection at 54mbps, for about 2 minutes, then it dropped to 1mpbs but stayed at Excellent connection signal. After a about 45 seconds it went back to 54mpbs but only for about 10 seconds, then dropped straight to 1mpbs. It goes up and down like this every 4 minutes or so, but the speed never really changes.
    Everything was sluggish, from loading website, having conversation on MSN Messenger to downloading files, nothing was as it should. Websites took everything from 20 - 60 seconds to load, or just not load at all.
    So I thought something must be interrupting the signal strenght, either the surrounding wires or concrete wall.
    So I moved the AirPort to a higher ground. Now it sits about 6' from the floor on the wooden desk, nothing is near it, connects to the router and speakers and is at least a feet away from anything (except the desk, of course).
    But same thing happends again. Plummets from 54mpbs to 1mpbs and then up to 54mpbs for a few seconds. No matter what the signal strength says its always the same sluggish feel.
    I have a 4mbit connection, has always been stable using ethernet and has never failed sofar. Good speeds. I use a Micronet SP3350A Ethernet Router I was supplied by my ISP.
    If anyone has any idea or any thought on this matter please elaborate.
    Many thanks in advance,
    Yours truly,
    Trausti
    Windows XP Pro
      Windows XP Pro  

    Hi Trausti:
    If all of your componets are 802.11G, try putting your AE in 802.11G only mode. That will prevent other slow 802.11B clients by joining your network.
    You may also be hit with some interference. Do you have a cordless phone? If so, that may be your issue.
    Give that a try.
    http://docs.info.apple.com/article.html?artnum=58543

  • How do I use the airport express to connect a remote PC via ethernet cable and access the internet via wireless connection, How do I use the airport express to connect a remote PC via ethernet cable and access the internet via wireless connection

    Trying to connect my xbox to the airport express. Have wireless in home and do not have a ethernet point behind tv/xbox. How do I configure the airport express to connect to my wireless network and then the airport express can use its connection via ethernet to connect the xbox to the internet.

    Is your AirPort Express Base Station (AX) a 802.11n model? If it is, you can reconfigure it as a wireless Ethernet bridge or ProxySTA. This would allow the AX to join another wireless network and have its Ethernet port enabled for wired clients, like the Xbox 360.
    To activate ProxySTA, you must set up the Express to join a wireless network and then enable the Allow Ethernet Clients setting; both settings are located in the Wireless tab of AirPort Utility.

  • Can I use the Airport Express to connect to a Linksys Wireless Network and then use the Ethernet port on the Airport for a wired connection to a device for internet access?  Would I be able to then also use that Ethernet pt to a Ntwk Hub for more wired c

    Thanks for the help.  Looked but not clear on what I am trying to do as being possible.  Can I use an Airport Express to connect wireless to a Linksys Wireless Router, such that I can then use the Ethernet ports on the Airport to either connected to a PC wired, or even use a hub off the Airport Express to allow multiple wired connections to it? 
    I am not looking to have the Airport Express extend my wireless network, just connect to it and provide me wired connections in a different location from where my Linksys Route is located.  Would prefer to replace Linksys with all Apple, but just not possible financially yet.  Thanks for the help.

    If the AirPort Express Base Station (AX) is an 802.11n model, then yes, you can reconfigure it as a wireless Ethernet bridge. In this configuration, the AX would join the wireless network provided by the Linksys router and its Ethernet port would be enabled for either a single wired device or for an Ethernet hub or switch for multiple devices.

  • I can print from my macbook pro using airport express usb connected printer, however my iPad is looking for an airprint printer.  Can I direct the iPad to the usb connected printer.  Both macbook and iPad confirm a wifi connection through the airport exp.

    I can print from my macbook pro using airport express usb connected printer, however my iPad and iphone are looking for an airprint printer.  Can I direct the iPad/iphone to the usb connected printer.  Macbook iphone and iPad confirm a wifi connection through the airport express.

    You will need to install an App like Print Central on the iPad to try to print to the printer. It will allow you to print to most printers. Check with their support folks if you need more info.
    PrintCentral for iPad on the iTunes App Store

  • Do I need to have Airport Express to connect to other computers on our homer network?

    Do I need to have Airport Express to connect to other computers on our homer network?

    Not necessarily. You could use the "Create Network" feature of your MBP's built-in AirPort card to provide an Ad-hoc wireless network for local wireless-capable computers to connect to.

  • Can I use Airport Express to connect to a printer, Time Machine Back up drive, second b/u drive, and scanner through a USB hub? if so, how?

    I have an Airport Express that connects to my printer. I'd like to add a scanner, and two back up drives (one for use with Time Capsule, another specifically for photographs backed up from Adobe Lightroom.
    The printer connects to the Airport Express through a USB hub and is recognized.  I cannot get the scanner nor either of the back up drives to be recognized.  Is there a way to do it or will I need to rely on a USB hub wired to the USB port of the MacBookPro?  If it is possible, can you walk me through the set up for each? 
    Thanks,
    Doug Earle

    I'd like to add a scanner, and two back up drives (one for use with Time Capsule, another specifically for photographs backed up from Adobe Lightroom.
    Unfortunately, the USB port on the AirPort Express will only work with a compatible printer.
    It will not work with a scanner, copier, or hard drive.
    It should be possible to do what you want by connecting a powered USB hub to your Mac and then connecting the devices to the powered hub.
    The setup for the scanner and hard drive would be covered by the manfacturers documentation, so providing specific advice for those types of products would be outside the realm of this support area.
    But, if you can provide model numbers, it is always possible that another user who is using those products might see this post.

  • Help!! can't get my airport express to connect to my network

    I have set up my airport express to connect to my network so I can play itunes with it but it says that the Airport has been set up but cannot connect To my network. I've tried it on both my computer and my wife's computer and we have the same problem. I have been able to connect in the past with my Airport express that I had for this one but for some reason I can't seem to connect it using this airport express. Any help would be much appreciated.

    When joining a non-Apple WEP encrypted wireless network with an AirPort, you must use one of two different styles for password entry depending on whether the network is protected with an ASCII or HEX key.
    ASCII password
    If using a password that is plain ASCII text, use the double quotation mark (") before and after the password. These are case-sensitive, and they are at least five characters long for 40-bit encrypted networks or at least 13 characters long for 128-bit encrypted networks.
    Hexadecimal password
    If using a password that uses only the hexadecimal range of characters, add a dollar sign ($) before the password. These passwords are at least 10 characters long for 40-bit encrypted networks or at least 26 characters long for 128-bit encrypted networks.

  • I have a MacPro 2008 workstation without Airport or Airport Extreme CArd isntalled. Can I use Airport Express to connect (wireless) to my wireless network? If so, can I then connect my Airport Extreme to my MAcPro by a ethernetcable ?

    I have a MacPro 2008 workstation. It has no Airport/Airport card so I have to use an ethernetcable to connect to my modem. As the MAcpro
    is in my office in the attic and the wireless modem is in the basement I have a problem. I wonder if it is possible to use Airport Express to connect to the wireless network? Itshould be like this: in my office I connect the MacPro with AE through an ethernet cable. If I can then get AE to connect (wireless...) to my wireless network I should be ablle to connect my MacPro to internet/wireless network. Is this possible???? Any suggestions are very much appriciated. Thank you.

    Apple calls this configuration a ProxySTA.
    To activate ProxySTA, you must set up the Express to join a wireless network and then enable the Allow Ethernet Clients setting; both settings are located in the Wireless tab of AirPort Utility.

  • Can multiple Airport Expresses be connected via ethernet to an Airport Extreme to extend a single WiFi Network?

    I am a big fan of both the Airport Extreme and Airport Express.  In my work environment, I need to create a good quality single wireless network around 2 large aircraft hangars and some offices at the perimeters.  We have a good quality wired Cat5e ethernet network extended between the buildings and offices now.  Is this possible and does it seem like a good practical solution?  I think that 4 or 5 Airport expresses would easily provide good wireless coverage in the needed areas. 

    Can multiple AirPort Expresses be connected via ethernet to an AirPort Extreme to extend a single WiFi Network?
    Yes, this will work just fine as long as any individual Ethernet cable run will not exceed much over 330 feet or about 100 meters.

  • Can I use airport express without connecting to a router?

    I hate trailing a long wire across my room just to listen to music through my (old but still fantastic) stereo system. I share a house with friends and our router is in the living room.. does the airport express need the router to work? sorry if this is a dumb question, there just doesn't seem to be an answer anywhere!

    You do not need the AirPort Express to connect to a router in order to stream iTunes. In its default mode, the AX provides a standalone wireless network. You would just need to connect to this network to stream. The drawback, of course, is if your are getting your Internet access via another wireless network, you would have to switch networks to perform either.

  • Can't get airport express to connect to internet after ISP changed my modem

    Hi. My internet service provider installed fibre optic to my house, so they gave me a new modem. Have not been able to get airport express to connect to the internet ever since. Just get the flashing amber light. Other than paying $50 for phone support, I have no idea what to do. I just use the airport so I can play music from iTunes from my stereo using airplay. I use the airport utility on my laptop.

    Does the new modem provide a Wi-Fi network? If it does, and your only goal with Express is for iTunes streaming, the Express would just need to be reconfigured to join the new modem's wireless network. Please check out the following Apple Support article for details.

  • I recently bought an Airport Express and connected it to my TimeWarner modem. Am able to surf the internet using my MacBook Air, iPad, and Apple TV, but the AirPort Express has a blinking amber light. How could I change it to a green light?

    I recently bought an Airport Express and connected it to my TimeWarner modem. Am able to surf the internet using my MacBook Air, iPad, and Apple TV, but the AirPort Express has a blinking amber light. How could I change it to a green light?

    The following may help: Wi-Fi base station: Understanding and resolving a blinking amber status light

  • Use my Airport Express to connect my PC to my non-aiport wireless network??

    I have a wireless network at my house. Can I somehow use my airport express to connect a pc that does not have a wireless card to my existing (non-airport) wireless network?

    Duplicate
    http://discussions.apple.com/thread.jspa?threadID=624119&tstart=0

Maybe you are looking for

  • Podcast Playlist Problems - 1st gen Shuffle

    First off, I'm a casual user of iTunes & Shuffle - almost solely for podcasts and couldn't figure out how to make a playlist stick on the iPod; it would revert to file order, not playlist order. Couldn't reorder in the Library>Podcasts folder. Autofi

  • IPhone synched with another library

    Had to restore my pc back to factory settings. Now iTunes is stating that my iPhone is synced with another iTunes library. If I do erase and synch with this library, will it erase my apps and photos or just music? Thanks

  • LaserJet 2600n Print Quality problem (with a scan showing the problem)

    I'm trying to create areas of solid colour in order to use the toner transfer method of making printed circuits.  To do that I need to print really dark solid black blocks - when I try that I see uneven toner in certain areas.  This scan of the outpu

  • Can't Connect to the DBConsole

    I have just installed 10.1.0.2 on an 64-bit AIX server running version 5.2.04. A new repository database was created automatically as part of the installation. Everything went just fine as far as the install is concerned, but I am unable to connect t

  • Experiences on JPA persistence providers other than standard SAP's

    Hi developers, in this thread I would like to gather experiences from all those who have tried using JPA persistence providers other than SAP standard implementation in productive environments It would be very interesting if you could share you exper