Airport Express stopped working with my Airport Extreme Network
Hi. I have an airport extreme as my base station and I have an express that is used to extend the network and plug into my stereo to allow for streaming music from iTunes. The system has worked great for months and now suddenly the extreme dropped. The light used to be solid green but now its yellow. I've reset the express to factory settings and now its blinking yellow. I can't figure out how to get it back online. Any help would be appreciated. It seems like an airport utility program could do this but I can't seem to find it on my Macbook Pro.
Tim
Sorry...I meant to say that the express dropped. The extreme still works fine and gives me good internet connectivity.
Similar Messages
-
Airport Express stopped working...
My airport express stopped working some time ago so I bought a new one so I could play my music remotely again. My ld one just "disappeared" , it no longer showed on iTunes. I am having problems setting the new one up. I am using airport utilities and going through all the prompts. It is making me join my existing wireless network. At the end when it goes to restart, I get an error message "Airport utility was unable to find your Apple wireless device after restarting".
I am stuck, any suggestions?Quick check list
Is your AE firmware updated to 7.3.2?
Is your OS 10.5.4?
Is your Airport Utility software 5.3.2?
What are you using for a wireless base station? is it a combo modem / router, or are you using an Apple Extreme Base Station in bridge mode with a third party router?
All of the above are possible issues.
Provide some more detail in your post and the group will be more likely to be able to help
Cheers -
I downloaded and installed Airport Express Utility 5.6 to get my old Airport Express to work with the latest Mac OSX 10.7.4, but when I install and run it, it still says my Airport Express is out-of-date and needs the 5.6 utility. What's up?
It is likely that you downloaded AirPort Utility 5.6.1. If you checked the requirements, this only runs on Leopard or Snow Leopard Macs.
You have Lion, so you need AirPort Utility 5.6 for Mac OS X Lion -
Can't Get Airport Express To Work With ATT's Uverse
For years, AE worked just fine with my 2Wire portal streaming music to my stereo. Went to Uverse 2 months ago, and AE quit working. I am not using an Airport base station, just the Uverse modem and I need help getting it to work.
There is nothing in this forum when I search for uverse, so I post this in hope someone can help me.
I reset AE it and it finally appeared in Airport utility with a yellow light. I click configure and when I choose to join my current network, it sets up it's own Apple network, removing it from Airport utility and changing Airport status in Network to yellow.
No matter what I do or how I try, I just can't get AE to work with the stock 2Wire modem.
Has anyone been able to get AE to work with just the 2wire router & not have to buy an airport base station.
Any help is REALLY appreciated, as I wanna hear my Christmas music, and it's turning me into a Grinch!
Thanks!
Message was edited by: Chris Winkler1+However, it asks for the security and all I see is WEP in the Home Network set up, I don't know if it's 40 or 128+
AT&T set this up, so only they can tell you for sure. My guess would be WEP 128 since this type of security is stronger than WEP 40.
+And it asks for a wireless password. I entered the one from the router & it did not work. Tried the Key and it did not work.+
This is the same wireless password that you would use if you were logging on to your wireless network with your computer. But, unless you first have the exact, correct security setting for your 2wire router, the password will not work.
+Has anyone out there successfully got their Airport Express to work with Uverse????+
I don't provide instructions to anyone on the forum unless I've first done it myself. I'm providing you with the same instructions that I used to help a neighbor with his 2wire Uverse setup last week. It works fine.
But, he called AT&T to ask them what security setting they used on his 2wire router. Otherwise, we would have had to try each possible setting to see if we could make it work.
AT&T also told him that his password should be 13 characters, all lower case letters with no spaces. That is what the neighbor said he used. I cannot confirm this as he did not share his password with me.
AT&T may have set up the password criteria differently on your router. You need to confirm with them on this.
+What password goes in the Base station tab, Key or Password?+
Any password you want. This is a separate password simply to be able to access the settings on the device in the future when you are using AirPort Utility. You could use your wireless network password if you want.
Please post back on your progress. -
Airport express not working with apple products
We have been trying to get airport express to work with a macbook pro, ipad2, iphone, laptop, htc wildfire - havent even tried the air music or printer yet!
We have a green light on the airport express which is connected to an ntl cable modem(virgin media network).
Currently the only thing that will connecy is the laptop and my htc phone. All the apple products will not connect?
We went to the apple store today and it worked grand when it was plugged in - the apple products all worked.
The network comes up on ipad2 but when you press connect it says 'unable to connect'
can anyone help us please?
thank youI have the same issue. Mine fixed itself for a bit and now it's broken again. I'm thinking it's going to be intermittently broken. I've tried turning both devices off and on again but that did not help.
-
I'm using iTunes 9 and I recently just bought AirPort Express. I have used it before in the past put the problem I have now is that I cannot select the Express network for my speakers. Does Airport Express only work with iTunes 10 or 11?
Hello Hornet12,
Indeed, iTunes 10.2 or later will be required to utilize AirPlay.
Using AirPlay
http://support.apple.com/kb/HT4437
AirPlay requirements and capabilities
To get full AirPlay features, make sure your AirPlay-enabled devices are running the latest software updates. The table below identifies minimum AirPlay requirements and capabilities:
Stream content from
Requirement
Notes
iPad
iOS 4.3 or later.1
From the Videos, iPod, Photos, Music, and YouTube apps on iOS devices, stream videos, music, and photos to an Apple TV (2nd and 3rd generation), or stream music to an AirPort Express or compatible third-party device.
With iOS 4.3 and later, you can also stream video and audio from a website or a third-party app installed on your iOS device if the developer for the app or website has added AirPlay functionality.
iPhone (3GS or later)
iPod touch
(2nd generation or later)
Computer
iTunes 10.2 or later.
Stream videos and music from your iTunes library to an Apple TV (2nd and 3rd generation), or music to an AirPort Express or compatible third-party device.
Apple TV
Apple TV software version 5.1 or later.
Stream music from your Apple TV to another Apple TV (2nd and 3rd generation), to an AirPort Express or compatible third-party device.
Cheers,
Allen -
I am currently using the Airport Express to work with a Bose Wave radio. 3.5 MM jack out of the Express and phono connectors into Bose. Is there a way to hook to a new Bose Wave which does not have phono input plugs?
The latest Bose Wave SoundTouch music system still uses a single 3.5 mm analog Aux port. You would connect the two using an analog audio cable with 3.5 mm stereo jacks on either end.
An example cable would be located here. -
Airport Express stopped showing up on the wireless network
Airport Express stopped showing up on the wireless network, and now I can't stream music from my iMac or iPhone through the AE as I used to. I now have a new adsl modem, but it doesn't help. The AE has a wireless connection to the modem. I've used Airport Utility to setup the AE again, no help. I also updated to Maverick but it didn't help. Any ideas?
By "I can't reset it" do you mean you tried both the "hard" and "factory default" resets on your AirPort Express Base Station (AX) and still were not able to see it from iTunes? ...and if so, were you able to connect to it directly, using an Ethernet cable, to configure it using the AirPort Admin Utility?
-
Airport Express Not Working with All Devices
My airport express has been working fine. All of a sudden, it stopped working with iPad and MacBook, but iMac is still working fine. Firmware is updated. What to do? Help~~~!
Which version of Windows and Service Pack is your Dell PC running?
-
Airport Express not working with Motorola Surfboard Sb6141 and TWC
My 2012 Airport Express was working fine with my Motorola Surfboard Sb6141 and TWC until about a week ago when the signal started dropping constantly. I hard wired the modem to my computer and everything worked fine. I took the Airport Express to the Genius Bar and it is working fine. I have followed the instructions posted throughout this board to reset the AE to factory settings, then turn everything off for 1/2 hour, turn on just the modem, the the AE 15 minutes later and the computer 15 minutes after that, but to no avail. When I try to set up the AE using Airport Utility, it allows me to assign a name and password, but then the light goes to solid amber and I get "An unexpected error occurred. Try again." Any ideas?
I'm still struggling trying to get the SB6141 to stay connected with my Airport Extreme but it drops altogether every day or 2 but if you're looking for an alternative, I've heard the Netgear CMD31T works well with the airport.
-
Airport Express not working with HughsNet
After ditching Comcast and signing up with HughsNet and Dirct TV, our Internet Access is very intermittent. We are requested to 'restart the device' when we access internet with both of our Macs at the same time. Only one or the other Macs works at any one time.
Hello!
Have you set up your Express to work with your new modem? See here: https://www.apple.com/airport-express/#setup -
Airport Express not working with wireless router
I just bought Airport Express to play music on my stereo. My PC running XP is connected to my wireless router (TeleWell TW-EA510v3) with ethernet cable and airport express wirelessly. Problem is that Airport Utility (and iTunes) can't find AE if it's not connected to router with ethernet cable.
I can connect to AE from Aiport Utility by "configure other" option so it's connected to my wireless network correctly.
Is this kind of set up even possible (pc wired to router and AE wireless)? I have tried tried WEP, WPA/WPA2 and no encryption on my wireless network and AE connects ok every time but Airport Utility still can't find it. I even tried to make a WDS network but AE was not compatible with my router. Now I can't come up with anything else to try.
Is there anything else to do? Should I buy WLAN adabter to my PC and would AE work then?
Why can't Apple make Airport Utility to recognise AE with given IP like with "configure other" option? Should not be too hard to program?!
Message was edited by: -MTL-Follow the isntruction lisetd below...they work.
Actually, the ae is a slick device, once you get it to work.
Make sure that one (or both) checkboxes in Airport Utility > Airport Express tab
(middle of page) are not checked...if one or both are checked, they limit (hide) wireless connectivity options (e.g., WEP-64) to choose from.
P.S. You must have patience: it may take a couple of minutes to establish the connection and turn the led to solid green. So, give it a chance.
===============================================================================
OMG!!! You are da man!!!
I have this streaming perfectly now!! Here is what I did for others to see and use (it does work perfectly)
Step 1) Clear/Reset the Airport Express
Step 2) Connect the Airport Express directly to the Router/Modem via Ethernet to set up Wireless
Step 3) Do it via the Manual Set-up Effort Listed Below following:
AirPort > Base Station
o Base Station Name: <rename or leave default>
o Base Station Password: <enter desired password>
o Verify Password: <re-enter desired password>
o Remember this password in my keychain: (optional)
o Set time automatically: (unchecked)
AirPort > Wireless
o Wireless Mode: Join a wireless network
o Network Name: <existing Linksys wireless network>
o Wireless Security: <select the encryption type of the existing wireless network> I have 64bit WEP
(Same as 40bit on the drop down menu)
o Wireless Password: <enter the existing wireless network password>
o Verify Password: <re-enter the existing wireless network password>
Music
o Enable AirTunes (checked)
o iTunes Speaker Name: <enter desired speaker name>
o iTunes Speaker Password: (optional)
o Verify Password: (optional)
o Click Update to write the new settings to the AX
In iTunes:
iTunes > Preferences... > Advanced > General
o Look for remote speakers connected with AirTunes (checked)
Once it congratulates you, unplug the ethernet cable
Verify in Aitport Utility that it still recognizes (if not, repeat the above). Note this may take a few minutes, so be patient.
Now place the airport express with your stereo (or whatever) and again be patient as it tries to find the network
(mine took 4 minutes) then it turns green and you are off listening to music on your stereo downstairs in another room.
Frustrating when it does not work at first, but keep trying and it will work!!
Thanks everyone for your help!!
=============================================================================== -
Airport Express Stopped Working when I switched to FIOS wireless router
AirPort Express worked for several years with Linksys router. When I upgraded to FIOS service, it came with a new wireless router. I have two Macs (iMac-G5 and MacBook 2.0 GHz) and work-supplied Lenovo T-61. Network is set up with WPA2 with 23-character-long pass phrase. AE (802.11B/G) will not connect to network. I can reset it to factory defaults and Airport Utility will find it. I then change the wireless interface on iMac to match the default network and I can configure the AE. When I apply the configuration changes, the AE reboots and never comes on-line. It stays in either the blinking orange pattern or in the alternate between orange and green pattern.
I have tried setting the AE up manually as well as "automatically" and have not had any success. I was a network engineer for over 10 years, so I have lots of experience configuring IP routing and switching. The log files on the FIOS router do not show any attempts by the AE to connect to my LAN.
Does anyone have any suggestions?Suspecting a problem with the security key, I began to experiment with different security settings. My first attempt was to change the security setting on the Verizon router from WPA2 to WPA. I did not change the key. When I did, I was able to configure the AirPort Express and then get the Airport Express to reboot and establish wireless communications with the FIOS router. Again, the only change I made was to switch the encryption type on the FIOS router from WPA2 to WPA. I have no idea why the AirPort Express would not properly join the network when the main wireless access point (the FIOS router) was using WPA2 security.
-
Airport express not working with 8.0
airport express was working fine until I downloaded IOS 8.0
Cannot get icon to show up on screen to play on airport express networkI have the same issue. Mine fixed itself for a bit and now it's broken again. I'm thinking it's going to be intermittently broken. I've tried turning both devices off and on again but that did not help.
-
I have an Airport Express connected to my stereo and it was working without any problem.
Recently I bought an Airport Extreme to use it as my Base Unit connecting it to my DSL.
I followed the instructions of the Airport Utility, and it started working.
Suddenly, problems started happen the Airport express that was connected to the stereo , stopped working and it disappeared from the Airport Utility area , as it did not exist in the network. I tried to reset it but it did not appear in the Airport Utility page.
Apparently I have other problems with the private network that it created because I cannot use it because of problems with the password that was created. I can only use the network that I created for my guest...
I dont know if my problem is a configuration problem or there is problem with the equipment.
I read that other users where having the same problem with the Airport express , using non apple equipment as their base unit , but I thought that using the Airport Extreme was going to be compatible and no problems would happen.
What should I do?Common Problem. Common solution.
Connect your Express via ethernet cable to the Mac while other network connections on the Mac are switched OFF.
After the Express shows up, change the settings of the Express to join the existing network. Take the appr. settings.
Unplug and reconnect your Mac to the network.
Check if the Express shows up in Airport Utility
Alternative solution:
Hardreset the Express to factory settings
(while on power push the Pin next to the audio plug with a paperclip. Plug out the Express still holding down the little button then replug the Express to power and release button)
After that, the Express will show up in the Airport Utility.
Make all needed settings.
I would prefer the first solution, its easier just to plug a cat5 cable.
Maybe you are looking for
-
How to get all records created this month?
Ok I'm trying to write a query that would get records that were created this month or later but not in the past. So today is Nov 16th 2009 I need to look for all records created from 11/2009 and onward (>11/2009) Any ideas?
-
How can I get my itunes playlist to sync with ipad?
I have created a few playlists in iTunes. When I attempt to drag and drop the playlist or sync the playlist with my iPad 2 I can see the playlist and songs on my iPad HOWEVER, they are greyed out with a dotted circle to the left of the song title.
-
Macbook is VERY slow all of a sudden
Hey all, Hope some of you will be able to help me out with this one... I have a regular macbook (2008) with OS X 10.6.8 installed on it. 2 nights ago, I was watching some YouTube videos when, with no warning, boom, it turned off. I thought it mi
-
A pop-up window keeps appearing with the message that a script is not completing correctly - " "Script: chrome://forecastfox/content/observers.js:1" I'm given the choice to a) let it continue in the hopes it will complete or b) cancel. No matter whic
-
HT4623 cannot customize contacts ringtones on iphone5
try to choose a curtain ringtone but the phone doesnt allow me too ,it only allows me 2 pick one for all my contacts .