Airport Express to extend wifi

I wonder if some kind person can please help as I am tearing my hair out trying to set up an extension to our wifi.
We live in a barn and the BT Home Hub 4 is unmovable at one end of the barn, therefore the wifi is sketchy at the other, where the office is.
I have BT infinity connected by their white modem/router and the BTHH4.  From there I have a 500ps TP Homeplug connected to the BTHH4 and the other in the office connected to one Mac.  This works ok but as we have two Macs and a wifi printer so I also have a Huawei repeater which gives wifi to those.
The repeater acts ok but is not stable and frequently the printer and Macs lose connectivity so I wanted to boost this by replacing the repeater with an AirPort Express.
Try as I might, when I connect it to the Mac it gives an error message on setup (Lion). 
I have managed to get a green light on the AE when setting up via Iphone but as soon as I do that, it disappears from the Iphone and I lose all my internet.  It must be something I am doing wrong in the setup/configuration and would really appreciate some step by step help.
Thanks.

The repeater acts ok but is not stable and frequently the printer and Macs lose connectivity so I wanted to boost this by replacing the repeater with an AirPort Express.
You are not doing anything wrong. The AirPort Express is not compatible with products from other manufacturers for the purpose that you are trying to achieve.
The Express will only "exend" or "repeat" a signal from another Apple wireless router.

Similar Messages

  • Can I use an Airport Express to extend wifi w/o TC?

    Hi-my setup is this: I am using an Linksys modem and an ASUS router. I have a new Time Capsule but I am only using that for Time Machine backups. My wifi signal is weak upstairs and I was wondering if I could put an Airport Express up there to extend my network.... Remember that my TC is not being used as a router. I am hoping that I can just plug in a new-but-not-yet-purchased Airport Express upstairs and it will strengthen my wifi upstairs. Will that work? Thanks for the help!!! Judy
    PS-I have a MB Pro running the latest version of Mavericks, an iPhone 4S and a 4th Gen iPad. 

    I am hoping that I can just plug in a new-but-not-yet-purchased Airport Express upstairs and it will strengthen my wifi upstairs. Will that work?
    An AirPort Express could extend the wireless signal provided by another Apple product, in this case the TC, but since the TC is not being used this way on your network, the Express would be of no value to you. It cannot wirelessly extend the signal provided by the ASUS wireless router.
    Check with ASUS support or an online forum for suggestions on a repeater or extender that would do what you need.

  • Airport Extreme with Airport Express for extending WiFi Network...

    I have had an iMac for quite a few years now and never needed WiFi until this week. I purchased a Macbook Air, an Airport Extreme and an Airport Express over the last 24 hrs. I opened the Airport Extreme first and followed the somewhat easy installation procedures. My iMac is wired via Ethernet cable to my Airport Extreme. The Airport Extreme is connected to a Motorola Cable Modem using Time-Warner. I also happen to have a Verizon Network Extender connected via Ethernet cable to the Airport Extreme. The spot where I most frequently would be using the Macbook Air, is about as far away from my iMac and Airport Extreme Base Network Router as you could be. The WiFi works, shows only one bar on the Airport icon. Consequently I want to plug my Airport Express in near this location to give me a better WiFi signal (and thus perhaps faster performance). I have read both the Airport Express Manual and the Airport Extreme Manual but neither talks all that much about the network extension function with the exception of connecting a stereo to an existing WiFi network. I am wondering what the specific steps are to add the Airport Express as a Network Extender. I also wonder if my Macbook Air will be able to access my iMac as the iMac is connected via Ethernet to the Airport Extreme vs. using the Airport Network. Any help will be most appreciated.

    Julie Kruyne wrote:
    I am trying to do the exact same thing and am having some difficulties.
    It was easier for "WiseJD" because he was using two Apple base stations, instead of your AT&T router.
    I select Manual Setup, it just sits there thinking - I can't get into the actual set up.
    So you see the Express in AirPort Utility, but when you select it and select "Manual Setup", nothing happens?
    When setting up the Express to extend my existing wireless network (AT&T 2WIRE modem and Airport Extreme), do I initially connect the Express, via Ethernet cable, to the modem or the Extreme?
    I'll guess that the AT&T device is connected to your broadband connection. Is the 2WIRE device either without Wi-Fi support or is that turned off? How is the Extreme configured, in particular in the AirPort/Wireless panel "Wireless Mode" setting and in the Internet/Internet Connection panel, "Connection Sharing" setting?
    If anyone could provide a step by step process on exactly how to set up the Express to extend my existing network, I would be grateful.
    I have very little experience with mixed-vendor home networking, but someone should be able to help.

  • How does one use airport express to extend a non-Apple wifi network?

    Hello. The wifi signal reaching my room shows good on my macbook but weak on my ipod touch. Therefore I want to pick it up on my airport express and extend/boost it.
    I have tried everything in the auto and manual methods of setup to do this, but the only thing I can manage to do is to join a wireless network wirelessly and then then connect to it through a ethernet cable from my airport express. I want to pick it up wirelessly and extend it wirelessly - is this possible? This is the reason why I bought it!
    thanks a lot, JJ

    Thanks for that info. So, I have been trying to use my airport express n to extend an airport n network (for greater distance of coverage) and cannot get this to work either. I can join the other apple airport's network and then connect to the airport express by cable. I have tried all the help available here but that seems to be the only way to extend a network. But I cannot see any point in that! JJ

  • How can I set up mhy Airport Express to extend my Time Capsule wifi wirelessly

    I want to extend my wifi off my Time Capsule with an Airport Experess in a part of my house that has no data cable ran to it. How do I do this?
    Thanks

    No more meseges.
    في ٢٦/٠٨/٢٠١٤، الساعة ٢١:٤٥، كتب Apple Support Communities Updates <[email protected]>:
    New discussion activity
    Bob Timmons has posted in the AirPort community.
    How can I set up mhy Airport Express to extend my Time Capsule wifi wirelessly
    Assuming that you have the model A1264 or A1392 version of the Express, it must be located where it can receive a strong wireless signal from the Time Capsule to be able to extend it correctly.
    A good general location would be a point that is about half way between the Time Capsule and other area that needs more wireless coverage.
    You will use AirPort Utility on your computer to configure the Express. An iPhone or iPad could be used as well.
    We can provide more help....if you need it....but we'll need to know what version of AirPort Utility that you are using on your computer....or whether you want to use an iPhone or iPad to setup the Express.
    https://discussions.apple.com/servlet/JiveServlet/downloadImage/2-26506753-46613 2/AboutAirPortUtility.png
    To post a reply, go to the discussion in Apple Support Communities.                                                             
    You are receiving this email from Apple Support Communities. You can change your email preferences in your Apple Support Communities Profile.
    TM and copyright © 2014 Apple Inc. 1 Infinite Loop, MS 96-DM. Cupertino, CA 95014.
    All Rights Reserved | Privacy Policy | Terms of Use | Apple Support

  • How do I setup Airport Express to extend my CISCO router's wifi range?

    Hi,
    I am using CISCO EA4500 router for internet connection via wifi. I have Airport Express with me, which I want to use as extender of the wifi network. I setup the Airport Express as "Extend the wireless network", provided same base station name (CISCO), network name (JKS) and passwords.
    However, I am not able to get it to work. Its gives me error saying network: unknown.
    I have just 1 BHK flat, and even then the range is not enough to reach from my DR to BR. I tried using Airport Express as the base station as well. But the problem is again the range.
    Help me please.
    Jayesh

    Can I do it other way around? I mean setup Airport as Base station and use Cisco to extend the wireless network?
    I doubt that the Cisco router would be able to to wirelessly extend the AirPort network, since Apple uses proprietary settings that are designed to work with other Apple routers.
    Also, when I am trying to use just Airport, I am not able to connect multiple devices at the same time
    Sorry, but I don't know whether you have the AirPort connected to the Cisco router using an Ethernet cable....or.....whether you are saying that you have the AirPort connected directly to your modem using an Ethernet cable.
    If the AirPort is connected directly to your modem.....what is the make and model number of this device?
    Since you know that the Cisco router is working OK when you have it connected to your modem, things would be much simpler if you connect the AirPort to the Cisco router using an Ethernet cable.  Can you do this?

  • Can I use Airport Express as a Wifi Extender?

    Forgive my ignorance, but I just swithed to all Apple products a few months ago and I have a question about the airport express.
    We currently have one airport extreme base station set up in our house. The only problem is that the g signal for my iPhone won't reach quite far enough to get to the third floor (its a very long and tall home).
    I was wondering if you can use the Airport express as a wifi extender with no cords plugged into it, similar to the linksys extenders you can buy that extend the signal range.

    LukeW, welcome to the discussions!
    Yes, an AirPort Express could be used with your Extreme to "extend" the wireless network created by the Extreme. I assume here that you have an "n" capable Extreme.
    If you have an older 'g" Extreme, the Express could be used to "participate in a WDS" (wireless distribution system), which is a similar setup.
    It will probably take some experimenting to find the best position for the Express (you want it to receive as strong a signal as possible and "extend", so a good starting point would be to place the Express at a point that was roughly half way between the Extreme and the area that needs more wireless signal.

  • Original Airport Express to extend range of non-Apple WiFi network

    I own one of the original Aiport Express devices in addition to an Actiontec PK5000 modem/router.  I would like to use the Airport Express to extend the range of the non-Apple router/wifi network.
    I heard it is possible to do this using a direct connection with an ethernet cable.  Is this possible?
    Thanks

    With the AirPort Express (AX) powered up, hold in the reset button for 8-10 seconds and then release. Allow a minute for the AX to restart.
    Connect the AX to the Actiontec gateway with the Ethernet cable, which I assume is working correctly.
    Open AirPort Utility and click Continue to follow the guided setup to "Create a wireless network". Use the exact same wireless network name, WPA2 Security, and wireless network password as the Actiontec network.
    AirPort Utility should recommend "Bridge Mode" for the AX, which is the correct setting.
    Once the AX is updated with the new settings, be sure to power cycle the entire network. That means powering everything off, waiting a minute, then powering up the Actiontec first for a minute, then the AX, then each device one at time until everything is powered back up.
    If the Actiontec is using standard wireless settings, the network will behave as if it is one large wireless network.

  • Can I use an additional airport express to extend my wifi network

    Hi,
    I have an airport express running my wifi network but I have black areas in farthest away areas. If I buy a further express would that extend my network ? If so what would I need to do !
    Tnx

    Hi Matt
    Thanks for reply - my speed is already poor - what would be a better solution ?
    Tnx again

  • Tried to use my two airport express to extend my wifi network on a windows pc but no success

    Tried to use my two airport express to extend my wifi network on a windows pc but no success

    My two airport express base stations are 802.11n and i am triying to use them extend my wireless network which is using a D link wirless router as supplied my my ISP connected to TalkTalk network.
    Unless the D-Link wireless router has Ethernet ports for each of the 802.11n AirPort Express Base Stations (AXn) to connect to, they will NOT be able to extend the wireless range of the D-Link.
    Instead, when directly connected and reconfigured for a roaming network, these base stations CAN extend the range.
    Please check out this Apple Support article on how to use AirPorts to extend a wireless network.
    The key is to have both AXns configured as follows:
    As a bridge.
    Each having a unique Base Station Name.
    Both using the same Network Name (or SSID), wireless security type and password as the D-Link.
    Each AXn to use a channel at least 3-5 channels apart both from each other and that of the D-Link.

  • Using airport express to extend Time Warner cable modem wifi signal

    I just today got a Time Warner Cable Arris modem with built-in wifi.  I'd like to use my 802.11n Airport Express base station to extend the TWC network wifi signal to other parts of my house, but I can't get the Airport Express to shake hands with the TWC modem.
    In Airport Utility, under the "Wireless" tab, I've selected "Extend a wireless network".  I am able to select my TWC network under "Wireless Network Name." Wireless Security is set to "WPA2 Personal."  But when I click "update" the airport express fails to join the TWC network, and my Airport Express signal disappears; I am only able to get the signal back by resetting the Airport Base Station with a paperclip.
    Applecare tells me that I might be able to use the Airport Express to extend my TWC network, but they do not support that process.  Is there any way to do what I'm trying to do?  Are there settings in Airport Utility I need to change?  I'd appreciate anyone's help.
    Thank you.
    Todd

    You need TWO Airport units, one to function as the main radio and the other to function as an extender.  I used two Express units.
    Configuration is simple if you start from a factory default condition.  Then connect the main Airport to AC power and finally to the Internet modem (or modem/router).  Open Airport Utility on your Mac or other computer and accept all of the recommendations.  After confirming that it works, insert your desired administrative and WiFi passwords.
    Then connect the extender to AC power.  As before, open Airport Express on your Mac or other computer and accept all of the recommendations.  No need to add password info.
    Do not expect the Airport to respond instantly to the configuration commands.  BE PATIENT!

  • Problems using wired airport express to extend airport extreme wifi

    I've followed the instructions in this community to use a wired airport express to extend an airport extreme wifi network.  Here is the issue I'm having.
    The airport express wifi network has the same name as the airport extreme wifi network.  So far so good.  My laptop will pick up the airport express wifi in my office, and the airport extreme wifi in the other part of the house without any problems.
    However, where the signals for the two overlap, my laptop will often latch on to the weaker wifi signal (I can tell by the number of bars) and my connection speed slows down significantly.  Since both airports have the same wifi name, I can't manually switch it to the better signal.
    Has anyone encountered this and have suggestions?  My only solution was to give the two separate wifi names so i can switch manually, but this is an inelegant solution.

    Hey dude, i'm having the same problem and i didn't find a proper solution for it, appart of creating another network as you said.
    Its weired  cuz in my case only the small things doesn't connect to the new router(using 2 airport extreme's) such as the iphones ipods and apple tv, but my mac did it great change the signal all the time i went from the basement to my room. So i just create another network and for me it wasn't a big deal to change it all the time i go to the basement, even more when use a mac.
    I know thats not the point when you have two wifi routers, but you know it's tolerable.
    Greetings!

  • Using AirPort Express as a WiFi Range Extender

    I have a Westell Versalink 327 W combination DSL Modem and Wireless Router downstairs hooked up to an iMac via ethernet cable. Can I use the AirPort Express as a WiFi Range Extender upstairs? Any issues I should be aware of?

    I suggest that you check with DLink on this as using the same manufacturer will always give you the best chance at compatibility.
    Maybe this would do it:
    http://www.dlink.com/products/?pid=357

  • I have a DLINK 524 150 and bought recently an airport express to extend my WIFI network. I tried by many ways to get the connection but it was impossibble. If possible, what is the necessary setup and orientation I have to follow ?

    In have a DLINK 524 and bought recently (march/2013) an airport express to extend my WI-Fi network. I triedmany ways to get the connection but it was impossible. Is really possible to get this connection ? If it is, what is the necessary setup and orientations that I have to follow ?
    Thanks

    Apple designed their "extend" feature as a proprietary function to work with other Apple routers, so it's extremely unlikely that the AirPort Express would be able to wirelessly extend your D-Link network.
    If you can connect the AirPort Express to the D-Link router using a wired Ethernet connection, the Express can likely be configured to provide more wireless coverage that way.

  • Trying to use Airport Express to extend network created by Actiontec M1424WR (FiOS)

    I would like to use two Airport Expresses to extend my home network which is created with my Actiontec M1424WR.  My ISP is Verizon FiOS.  I previously had TimeWarner and used one of my Expresses to create the WiFi and the second Express to extend it.  Now that I have a modem/router provided by Verizon, I'd like to utilize both Airports as extenders.  I have a two story house and the signal is "fair" upstairs.  I would like to use my Roku player to access my home library via Plex. My problem(s):
    I used a hard reset to restore my Expresses to the default settings because my Airport Utility could not find them and my old network is not active anymore.  After the reset I was able to find them but I kept getting an "unexpected error occurred try again later" message.  After this message my Macbook OS X 10.8.5 could not connect to the internet anymore.  I had to go to System Preferences ---> Network ---> Assist Me.. ---> Assistant ---> and then found my network and reconnected.  So my Macbook is connected again but my Airport Expresses sit unused..
    My Network:
    Modem/Router ->     1. PC
                                   2. PC #2
                                   3. Xbox
                                   4. D-link 5 port gigabit switch -> a. Directv  b. xbox #2  c. xbox #3   d. THIS IS WHERE I WANT MY AIRPORT                                       
    I would like one Airport, connected via ethernet and towards the back of the house, extending my network and the other, connected via wifi and upstairs, also extending my network.
    If anyone has time on their hands to help me with my problem I would greatly appreciate it.
    Thank you,
    Mike

    I followed Kappy's advice and connected one AEX to my modem/router using a 50ft ethernet cable, creating a new network.   I connect my second AEX wirelessly to the first, extending the network.  The first AEX was placed towards the back of the house and the 2nd AEX was placed upstairs.  I was able to stream netflix on two devices upstairs while streaming a movie using plex from one pc downstairs to a roku player upstairs without any buffering at all.  All three were in HD and my brother was playing multiplayer on his xbox (wired).  It works! Thanks Kappy!

Maybe you are looking for

  • Why there is no dependent req. passed from discontinued material ?

    Dear gurus, I set discotinue indicator=1, effective-out date and follow-up material. But, there is no dependent requirement passed from discontinued material material. That is I can't see the dependent requirement for the follow-up material. Anyone t

  • Change the topic icon in Webhelp TOC?

    We are using RoboHelp 9 on a Windows 7 platform. When we publish Webhelp, the topic icon in the published output has a question mark in it. We have had almost universal feedback from our target audience that they are confused by the question mark (th

  • Change font in "Reflection black"?

    Hi; I'm using the "Reflection black" theme, but want to change the font for the title and the buttons. I've figured out how to do it, so I'm not looking for directions on HOW to do it -- I'm having a different problem. I can change the font for both

  • Linking text frames with script label array in vbs

    Here's what I'm using TextFrameStr = "name1,name2,name3,name4" TextFrameArray = split(TextFrameStr, ",") 'On Error Resume Next For i = 0 to Ubound(TextFrameArray) myDocument.TextFrames.item(TextFrameArray(i)).nextTextFrame = myDocument.TextFrames.ite

  • EMC RecoverPoint and storage replication

    Hi, I just need some feedback or inputs regarding DR. Can you help me sharing on your thoughts about the EMC Recover point to do a storage level replication for Oracle Database. DB Info: Oracle 11Gr2 on Solaris 10 with 2 node racs on ASM on ZFS Stora