Airport Express turns off

Over the past week, I have noticed that my Airport Express (model MC340LL/A) turns
itself off periodically. I have it cabled to my iMac and periodically use
a wireless connection to my MacBook. I have to pull the power cable and plug it back in to restart. A pain if I fire up the MacBook downstairs.
Is there some timer or setting that turns off the device after some period of no connections to an operating computer?

The model number that you provided indicates that you have an AirPort Extreme, not an AirPort Express.
In either case, there is not a setting or adjustment that powers the device down after a period of inactivity. It should remain on 24/7 unless it is physically powered off.
If you notice that the symptoms continue, you should make an appointment at an Apple store or authorized repair shop to have the device and it's separate power supply checked for proper operation.

Similar Messages

  • After 15 mins  with no activity my airport express turns off how can I make it permanent

    After about 15 mins with no activity my airport express turns off. How can I make it stay on permanently ?

    Not sure what you mean by "turns off".  Are you saying that the light on the Express goes out after 15 minutes?
    Assuming that it is functioning correctly, the AirPort Express is "always on". It has no type of "sleep" setting.
    If the power light on the Express remains on, you have some other device on the network that is going into a standby mode or sleep mode. Check the Preference settings on other devices on the network.

  • Airport Express turns off unexpectedly

    Hy, I have a problem from a week with my airport espress.
    It turns off unexpectedly, when I connect it to the electrical outlet,
    it works for a few minutes (good wireless signal). After few minutes
    It turns off, like no power. If I muve the cable, it starts to work, but after few mitutes
    it turns off.
    I think thet the problem is related to the power supply (I tried to change several outlets).
    suggestions?
    Thanks
    Matteo

    Hi Bob,
    thanks for your answare... I said thai I'm very luky for this
    I'll bay anotherone.
    have a good day...
    bye
    Matteo

  • AirPort is turned off on reboot

    Hi,
    AirPort is turned off on reboot.
    I don't have any setting for that.
    Does anyone know how to fix this?
    Thanks.

    bwittbold, welcome to the discussions!
    From your description, this sounds like an internal power supply problem on your AX, but it couldn't hurt to try a hard reset on the unit as a last resort. If this is successful, you will need to reconfigure the device.
    Pull the power plug from your unit. Hold in the small reset button with an unfolded paperclip or something similar and continue to hold it in for at least 10 seconds while you plug the power cable back into the AX.
    If this does not help, it is time to call Apple support for repair or replacement.

  • Airport keeps turning off!

    I have a mid-2009 MacBook Pro running Snow Leopard. When I'm running wireless in my home, I experience a lot of drop offs from the Internet. While some of this is due to poor wireless reception, what puzzles me is that when I try to get back on, I keep seeing that Airport is turned off. When I go to Network Preferences, it also tells me that Airport is turned off. When I attempt to turn it back on, I am asked to verify my password and such. Still, Airport is indicated at not being turned on. I am forced to Restart my MacBook Pro. When I connect up to my router via an Ethernet cable, Airport is indicated as being on. Can anyone please offer me some assistance?
    Mark

    You are posting in the MacBook Pro (Original) forum. Your mid 2009 MBP qualifies you to post in the MacBook Pro (Late 2008 and 2009) forum area here:
    http://discussions.apple.com/category.jspa?categoryID=251

  • Why won't my airport express turn on after thunder storm ?

    Why won't my airport express turn on?

    There are three Airport resets, soft, hard and factory default.  It would probably be beneficial if you tried each one in sequence.  Actually, you could jump to the factory default reset if you don't mind reconfiguring from scratch.
    If none of the above helps, you may well have a harware problem.

  • VNC with a computer who's airport is turned off?

    Sorry, this is probably kind of a stupid question....but can you use remote desktop to monitor computers who's airport is turned off?

    sure, as long as they're connected to the network via Ethernet instead.

  • Airport keeps turning off on my Mac book

    Why does airport keep turning off with no way to turn it back on except a restart?  I've seen countless posts on this, but ot sure if there is a solution.

    This is the Mac Pro desktop forum. I requested your post be moved to the MacBook Pro laptop forum.

  • Modem Setup Says Airport is Turned Off When It's Turned On

    I'm trying to set up a new modem/wireless account using Motorola 2247-N8. During the se- up phase it keeps telling me that the AirPort is turned off, when in fact it's turned on and can pick up many wireless networks in my vacinity. This problem keeps kicking me out of the set up phase so I can't even set up the new network. I go into System Prefrences>Networks and the AirPort is there with a green light. What is the problem?

    If your MacBook (MB) is able to "see" and connect to other Wi-Fi networks then chances are the AirPort card built-in the MB is not the issue.
    By default, your Motorola Netopia gateway device has a local (LAN-side) router IP address of: 192.168.1.254. Your MB will need to be on this local network in order for it to find it. This may require that you temporarily reset your MB to using an IP address, like 192.168.1.100. You can do this via System Preferences > Network > AirPort. Easier still I would recommend that you temporarily connect the MB to the Motorola using an Ethernet cable. The Motorola should assign the MB the proper IP address and you should now be able to access the Motorola's web-based administrator interface.

  • Can Airport Express bridge off another Airport Express?

    Hello All,
    Currently I have the current setup and working great for the most part.
    Aiport Extreme (Base) - Connected directly to my ISP Modem upstairs.
    Airport Express 1 (Bridge Mode) - Bridged to the Airport Extreme Base and placed midway hall upstairs
    Airport Express 2 (Bridge Mode) - Bridged to the Airport Extreme Base and placed downstairs
    Currently when I am out on my deck, I will receive 1 bar or no signal.. The signal that I do recieve is coming from one of the airport express.. 
    My question is, If I place a third additional Airport Express outside on my deck/patio will this daisy chain off the current AirPort Express that is already bridged to the Airport Extreme Base, or will it ONLY be able to bridge from the AirPort Extreme Base and not daisy chain from the AirPort Express? In other words, if I do not receive signal from the AirPort Extreme base on my deck/patio will this be of no use to extend the range?
    Many thanks in advance!

    My question is, If I place a third additional Airport Express outside on my deck/patio will this daisy chain off the current AirPort Express that is already bridged to the Airport Extreme Base
    Sorry, but no. Although the third AirPort will connect to the AirPort Express, it will "join"....not extend...the network. When an AirPort "joins" a network, it provides no additional wireless signal coverage.
    or will it ONLY be able to bridge from the AirPort Extreme Base
    Correct, if you want the additional AirPort Express to "extend" the network.  An "extending" device must connect directly to the main base station.....not to another device that is already extending the wireless signal.  The reason for this is that Apple's "extend" feature only allows a signal to be extended wirelessly one time....not two.
    if I do not receive signal from the AirPort Extreme base on my deck/patio will this be of no use to extend the range?
    Correct. But, if you located the additional Express somewhat closer to the AirPort Extreme, it might pick up enough of the signal to be able to extend it. Remember, an extending device can only extend the quality of signal that it receives.
    However, if you could run an Ethernet cable from the port on the current "extending" Express to the other Express that you want to add, you could configure the additional Express to 'create a wireless network" and effectively extend the network that way.

  • (2012) AirPort Express disapears off network

    So I have one of the new Apple TV style AirPort Express's and it's only purpose is to stream music. Unfortunately everytime something is played from a computer it completely drops off the network. (Signal strength is about 74% before dropping)
    My routers status page and Airport Utility show no connection from the AE whatsoever, yet the AE status LED stays Green.  The only way to get it back up is to pull the plug.
    The most annoying part of this is I have 3 Apple TV's that work perfectly, all the time! Suggestions are very welcome.
    (Note that I've already tried disabling IPv6 on the Mac)
    Hardware:
    Asus RT-N16 w/ DD-WRT build 14929
    2012 AirPort Express w/ Firmware 7.6.2
    2012 MacBook Air w/ OS X 10.8.1
    AirPort Info:
    Wireless Mode: Join a Wireless Network
    Routing: Bridged
    SNR: 54; -34 Signal, -88 Noise (as reported from Router)
    Assigned IPv4: Static
    IPv6 Mode: Local-Link Only
    AirPlay: No password set
    Router Info:
    Network Mode: NG-Mixed, 2.4GHz, 20MHz channels
    Encryption: WPA2-PSK (AES)
    ACK Timing: 100 meters
    Beacon: 100ms
    CTS Protection: Disabled
    Preamble: Short
    Shortslot: Short
    SPI Firewall On: Set to filter Multicast & Port 113 (IDENT)
    VPN Passthrough: Disabled
    UPnP: Enabled
    TCP timeout: 360 Seconds
    UDP timeout: 120 Seconds
    DHCP Lease: 720 Minutes (Not that this matters with a Static IP)

    Update:
    Tried rebooting the router multiple times, doing a factory reset and all 3 primary 2.4GHz channels. Then I downloaded the pervious version of AirPort Utility (AU 6.x is missing logging) to check the logs but when the AE restarts the logs get cleared.
    Also when the dam thing dies it takes the entire network with it for about 45 seconds; the link speed on the router drops from 144Mbps to <1.

  • AirPort Card Turned Off/ How's It Turned On?

    I've gotten as far as installing the software and hooking up all the wires. When I open the AirPort Utility window the base unit shows at the upper left. That's the only icon showing. When I click the continue button,after a few seconds, a message drops saying AN ERROR OCCURRED JOINING THE SELECTED NETWORK. If I click Manual setup the same thing happens. I have reset and extreme reset the AirPort. When I check the About This MAC list of components and click the AirPort Card the info says it's turned off. Is this the problem? If so hoe do I turn it on?

    Hello Milton hoskins. Welcome to the Apple Discussions!
    When I check the About This MAC list of components and click the AirPort Card the info says it's turned off. Is this the problem? If so hoe do I turn it on?
    The easiest way is via the AirPort icon in the OS X menu bar. Click on the AirPort icon, and then, select the "Turn AirPort On" option.

  • AirPort -card turns off

    Hello,
    I have small problem with my AirPort card, it turns off by itself about 15-20min (if I do not USE my Mac).
    I have AirPort station and my older PoweBook has "connection" all time long. I have tried to find out any options in energy savings but no. Is there any way to setup my AirPort card to keep going all time ?
    MacBookPro 17"   Mac OS X (10.4.7)   2.16 GHz Intel + 2 Gt DDR2 SDRAM

    OK

  • Airport Being Turned Off

    I am using a MacBook Pro running OSX 10.5.3. Every time I restart my MacBook, it turns off Airport. This is extremely annoying because I have it set to automatically mount network servers at login, but this will fail unless I an very quick and turn Airport back on before it tries to connect to the server. I don't know why Airport keeps getting turned off, but does anyone know what I can do to stop this from happening?

    adam ramage wrote:
    we have been having a lot of problems with students turning off the airport and playing games to evade us from watching them. Is there any way to prevent students from changing the status of the airport ( on /off )?
    Would managed accounts be too drastic a solution? Perhaps you could switch the accounts of offending students to such a status.

  • Airport extreme turns off.

    I just bought a airport extreme and after few hours it turns off. It happened twice, any help please? thanks a lot

    This should not be happening. Please return the defective device for a replacement.

Maybe you are looking for

  • ICal subscribed calendar on the iPhone

    Hi, I've run on the Mac OS X Server calendar services. What is the URL for the calendar subscription? (not CalDAV account) I want to add Subscribed calendar on the iPhone!  thx for Help SH

  • VPN clients can connect via SSTP but not IKEv2 due to error 808

    I have a Windows Server 2012 R2 with RRAS configured to allow SSTP / IKEv2 VPN connections. I'm using an external certificate for server authentication and the client authentication is done via domain username/password (Protected EAP). The clients ca

  • Inventory age analysis report

    Dear All, I have closing stock on Say 31.03.2008 and need to bifercate on no. of days it is lying as dead stock. eg say closing stock = 100 Units      Dead Stock 180 days = 20 units      Dead Stock 270 days = 10 units Is there any standard report ava

  • Typewriter properties set to a different color per user.

    In Std 9 each user can set the properties of the typewriter and arrows etc to a different color. This feature appears to be gone in Std XI. I am looking for a work around or how to set it up.

  • "Licensing for this product has stopped working" error

    Hi and thanks for your help. I've installed Director 11, but when i run for fist time i get this error : "Licensing for this product has stopped working"; I've already uninstall it and install it again, but it keep saying me the same error. I've alre