Airport express update

I updated the airport express software today. restarted computer, and can no longer connect to the internet. My husband's powerbook (airport express NOT updated) still is able to connect.
When I try to open internet connect dropdown from the airport express icon on toolbar, I get the beachball and it just won't open. what can I do now?
g4 power book Mac OS X (10.3.9)

There are three Airport resets, soft, hard and factory default. It would probably be beneficial if you tried each one in sequence. Actually, you could jump to the factory default reset if you don't mind reconfiguring from scratch.

Similar Messages

AirPort Express update to 7.6.1 fails with error -6753

I have an AirPort Extreme acting as my primary base station, and a AirPort Express acting to extend my wireless network. The Extreme updated just fine to 7.6.1 (The update took a while, but it was fully successful.) But my AirPort Express repeatedly fails to update. I get the message "An error occured while updating software -6753".
Also note that I first did the update to OS X 10.7.3 (not yet a choice in the Operating System dropdown below this form.)
Any thoughts?

Hi Marne,
Thanks for reply. Good to hear everthing is working fine with your Express.
wifiguru wrote something interesting on a similar thread, which helped me updating the Express. In the configuration of the Airport Extreme I switched from channels automatic to channel 12 (no special reason for that number, just a try). After that I could update the Express to 7.6.1 without a problem and everthing seems to work fine now. I don't know how to reference wifiguru's tips so here is a copy:
wifiguru
Re: 7.6.1 Airport Extreme Update problem 02.02.2012 07:38 (in response to Vijay S)
Have you guys tried switching channels after you upgraded to make sure it's not a bad channel/interference issue ?
As for downgrading, if you launch AU and click on the AP, you will see the pop up which gives you AP details. You will see version info. on that popup. Now hold down the option key and click on Version and it will give you a drop down menu and you can downgrade to the older sw. if needed.
I recommend playing around with channels first to eliminate other environment related issues before you do this.
Now it's too late over here to test the HiFi but I'm very optimistic -> the iPhone Apps are working.
All the best
Gunter

Airport Express, update software? help?

When I turn my computer on, Airport Utility opens up and it has the internet world symbols and a green circle.
The problem part is, the airport extreme symbol has a 1 in a red circle and an amber flashing circle next to it.
help??

Click it. AirPort Utility will tell you the reason for its need of attention. It may be that a firmware update is available or some other reason that you may elect to ignore.

How do I download ID DL1481 (firmware update for airport express)

I am unable to use Airport express 802.11g with Lion 10.7.4. I have Airport Utility 5.6. When I try to update firmware, the dialogue tells me that current firmware version is 6.3 and that's the only option I have for updating. From Apple Support page I learned there is Firmware Update 7.6.1. available (download ID 1481). However WHERE IS THE FILE??????!!!!!
I really appreciate your help,
Arto

Hello:
Airport Express updates (including firmware) are here:
http://support.apple.com/downloads/#airport%20express
Barry

How do I use an Airport Express as a "range-extender" for Airport Extreme?

I bought an Airport Express with the intent of using it as an "extender" for my Airport Extreme, but I find no paper that describes how this is done. Any suggestions would be appreciated.
Thanks and cheers, Veit

Thanks for the info. Try this to see if it will do the job for you:
_On your AirPort Extreme (AEBS):_
Open AirPort Utility and click Manual Setup
Click the *Wireless tab* below the row of icons
Your *Wireless Mode* should already be set to “Create a Wireless Network”
Make sure there is a check mark next to “Allow this network to be extended”
Note the setting for Wireless Security as you will need this for the next setup on the AirPort Express
Update to save changes
_On the AirPort Express (AX):_
Hold the reset button in on the AX until you see the amber light begin to blink more quickly
Temporarily, move the AX near your computer and connect a short ethernet cable from your computer to the AX
Open AirPort Utility and click Manual Setup.
Click the *Wireless tab* below the row of icons
*Wireless Mode*….should be set to “Extend a wireless network”. If you don’t see this choice, hold down the option key when you click on the selection box
Wireless Network Name…the name of your main AirPort Extreme network should appear as a choice. Click to select it.
Place a check mark next to Allow wireless clients
Wireless Security….exact same setting as your AEBS
Wireless Password…exact same password as your AEBS
Confirm Password
Click the Base Station tab to assign a name and device password for the AX, set time zone, etc.
Click the Music icon to enable AirTunes if you wish
Update to save settings. You can disconnect the ethernet cable and move the Express to the desired location.
For further reference, Apple's instructions for the "extend" setup appear on pages 43-44 in the Apple AirPort Networks Guide.
Please post back on your results.
Message was edited by: Bob Timmons

ITunes update no longer connects to AirPort Express

Sympton exists on both iMac and iBook even after permissions updated with Disk Utility. Anyone have any thoughts?

I am using Airport Express also but have not had any trouble with the iTunes 6.0.4 update. Is your AE firmware up-to-date? Try resetting the AE (look in Airport Help for instructions) You may want to post to the Airport Express discussions. Good luck.

My new airport express does not connect my printer to my computer? My old airport did! then I updated to OS 10.9.2. How do I get it connected?

My new airport express does not connect my printer to my computer. The old airport did. I recently updated to OS 10.9.2. I have since bought a new
HP 6700 all in one wireless printer, got the latest Comcast router. None of which connect to my computer wirelessly. Which do I throw away the printer, router, or Mac? Help

Contact HP for support.
Explain that you are using a Mac, anticipate the inevitable groan, and wait patiently for their resident Mac expert to return from vacation.
Until then download and install its driver here: http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?product=5058338&cc=us&dlc=en &lc=en
Otherwise return the printer and purchase one from a company that visibly supports OS X. HP isn't on that list.

How do I update the software on my Airport Express?

Hello everyone,
I have an Airport Extreme base station acting as WDS and an Airport Express station. I recently upgraded the security on the Airport Extreme base station from 128-WEP to WPA (Personal), but I don't know whether I have to do something to the Airport Express base station. It's green light is on. Do I need to do something? Also, how do I update the software in the Express? Whenever I open the Airport Admin Utility, the only thing that comes up on a scan is my Extreme base station. Any advice would be most appreciated.

yes you need to update your Airpost Express. I just went through this last week with two of my Airport Expresses. I updated my Base and my Remote's light was green but was unable to view it in Airport Admin Utility. So this is what I ended up doing and it works great.
First bring the Airport Express you are working on in the same room as your computer......just the ease of seeing what is going on with the Airport Express. Next you need to reset it.....take a paper clip and push in the little button next to the Audio port and hold in 10 seconds. Then unplug the unit wait 10 seconds and plug it back in. wait about 3 minutes and then you will need to use Airport Set Up Assistant. You will need to make sure you have WPA Personal on your Airport Express too.
don't forget to make sure you have the update firmware too.
http://www.apple.com/support/airport/
I hope this helps.....
Powerbook G4 1.67 15", 1 gig ram, 128 vram, 80 gig harddrive Mac OS X (10.4.6) Powermac G3 266 mt, Dell 5150,ibook G4, 1 gig shuffle, epson printers, airport

Latest firmware update 6.3 and dead airport express basestation

My Airport Express basestation (aebs) is 13 month old. It suddenly went dead. No light, no reset, nothing.
And maybe a coincidence:
It happened only 36 hours after I loaded the new 6.3 firmware update.
I wonder if anyone had the same experience regarding a dead aebs due to firmware update 6.3. At least - compared to the posts here - a dead aebs is not such a rare incident as one might wish it would.
Mac OS X (10.4)

Exactly the same has happened to mine, although I don't recall doing a firmware update. Yesterday I just downloaded and installed iTunes 6.0.2 & QuickTime 7.0.4. However, when I came home from work this evening my Airport Express had no LED on as normal. It was cold and had obviously been off for sometime. The fuse it OK and it's just one month after the 1-year guarantee period. Sounds suspiciously like a plot to me....
What has Apple done to kill my Airport Express???
20 G5 iMac iSight Mac OS X (10.4.3) Airport Express, iPod 60GB

I have an Airport Express that I am trying to use connected by ethernet to my iMac G4 running Mac OS 10.4.11. I need to update the Airport software in order to use security option WPA2 Personal. I currently have Airport software v. 5.6.1.

I have an Airport Express that I am trying to use connected by ethernet to my iMac G4 running Mac OS 10.4.11. I need to update the Airport Express softwart in order to use security option WPA2 Personal to connect to the internet through my Airport Extreme. I currently have Airport Express software version 5.6.1. How can I update this software? (I can connect directly to my Airport Extreme by ethernet and download the update that way). Is a later version of A E software available for download anywhere? Any suggestions would be greatly appreciated.
Thanks.

Download and install AirPort Utility 5.4.2 for Mac OS X 10.4.11 "Tiger" here:
AirPort Utility 5.4.2
Once installed, launch AirPort Utility. It will tell you if a firmware upgrade is available for your Express.

Using TimeCapsule with a Comcast modem AND Airport Express. Way slower after updates! What's up?

I've been running this set up for two years now without a hitch. Comcast Modem to TimeCapsule by Ethernet. Then TimeCapsule to Airport Express via WiFi. It used to work great because my TC was far away from my family room and the AE extended my network flawlessly.
After Mavericks and IOS 7.06 installations on my devices (iMac, Macbook Air, iPhone, and iPad) my wifi seems to be moving at half speed. I've rebooted the Comcast Modem and TimeCapsule. I guess I should reboot airport express as well. But I doubt thats the problem. I was thinking of asking Comcast to change out Modems but this is a new problem only since updates. What should I do?
Any ideas?
Thanks
Marylyn

Power off the entire network.....all devices....computers, printers, modem, TC, mobile devices, etc
Wait a few minutes
Start the modem first, and let it run a few minutes by itself
Start the TC next and let it run a full minute
Keep starting devices one a time about a minute apart until the entire network is powered back up
Check the network

After iTunes update, can't connect to remote speakers via Airport Express

I updated to iTunes 10.1.2.17 the other day, and ever since then, I can't connect to my stereo via my Airport Express. I get this message: "An error occurred while trying to connect to the remote speaker 'Airport Express'. The network connection failed."
My Airport Express firmware is up to date and I have not changed any settings since the iTunes update.
Anyone else have/had this problem? Any ideas?

I run Vista and I had the same problem after updating to the latest version of iTunes: Apple TV would indicate "Loading Library" for ever and nothing would happen. This had never happened before.
I tried different tricks like turning on/off home sharing on both iTunes and Apple TV (didn't work), unplugged/plugged Apple TV (didn't work), restore Apple TV (didn't work).
Eventually the solution was actually very simple: go to Firewall settings and make an exception for iTunes. I don't know why that was not necessary before the update, but it made the trick.

My airport express seems to no longer be supported by Apple. Was working fine, just blinking amber. So tried to update and reset, but update will not install with Lion? Im disgusted.

Airport express was blinking yellow. Tried to update, but my computer said update is not supported (yellow exclamation points). I have a mac pro with Lion and latest updates. So I reset express, yes that was a mistake because it was at least functioning on my stereo, now it does not function at all and shows on my wifi as "airport express", used to be labled "stereo". So it asks for an update, I download the update, but computer will not allow update to be installed. I will buy a newer one if I have to because I enjoy it's function, but I will be extremely disgusted with Apple to have to do so.

If you are using Lion...as you indicate...is it possible that you mistakenly downloaded the incorrect version of AirPort Utility?
Try the following version for Lion:
AirPort Utility 5.6 for Mac OS X Lion

After the Airport update today, Airport Utility no longer sees my new Extreme or my 2 new Airport Express relay stations (same network); however, my internet is working and all Airports are green?

After the Airport update today, Airport Utility 6.0 no longer sees my new Extreme or my 2 new Airport Express relay stations (same network); however, my internet is working and all Airports are green? I'm running Lion on my iMac and updated when Airport Utility prompted me to do so a few hours ago. After applying the updates is when Airport Utility stopped seeing my routers. But they are working? Thoughts?

Did you remember to completely power cycle the entire network?
You would want to do this after any update or change to the network.
If you did not do this yet......things are out of sequence.
Power off everything on the network.....all devices.....power down order is not important
Wait a few minutes
Start the modem first and let it run a minute or two by itself
Start the next device connected to the modem the same way
Work your way out on the network starting each device about a minute apart
Check the network

After updating Time Capsule to 7.7.2, Airport Expresses can no longer connect

After I update the Time Capsule firmware to 7.7.2, my three Airport Expresses can no longer connect to the Time Capsule (their orange lights blink and they appear inaccessible in the Airport Utility). When I downgrade, they are able to connect fine.
They are connecting to the Time Capsule over my 5GhZ wireless network.
Any help?

Hi yonajon!
I have some resources for you that may help you resolve this issue. First, here is an article about addressing the blinking amber light:
Wi-Fi base station: Understanding and resolving a blinking amber status light
http://support.apple.com/kb/ts1589
If you are still having issues, you may need to reconfigure your extended wireless network:
Wi-Fi base stations: Setting up and configuring an extended wireless network (802.11n)
http://support.apple.com/kb/ht4259
Take care, and thanks for visiting the Apple Support Communities.
-Braden

Airport express update

Similar Messages

Maybe you are looking for