Airport express use as router.

I have two airport express. the first as base, the second as bridge. I want to use a wireless IP camera connected to internet and accessible from any other PC in the world by internet. Is it possible with my airport express or do i need a router.
thanks for any help.

You main base AirPort Express is a router if you have configured it as such.
Open Macintosh HD > Applications > Utilities > AirPort Utility
Click on the base AirPort Express icon,then click on Edit
Click the Network tab at the top of the next window
IF....the Router Mode setting is configured as DHCP and NAT, then the Express is functioning as a router. You will likely need to use the Port Mapping settings to configure the cameras.
IF...the Router Mode is set to "Off (Bridge Mode)", then you have another device on the network....you likely call this your modem....that is providing the DHCP and NAT functions, so it is acting as the router for the network. You will need to configure Port Mapping or Port Forwarding on this device.

Similar Messages

Airport Express (using AirTunes) with D-Link 614+ Router

I have the following issue with my Airport Express not able to stream audio to iTunes. My configuration is an existing D-Link 614+ Wifi Router and I joined the Airport Express to my existing wifi network.
I found a thread that says D-Link routers uses the 192.168... IP range and Airport Express uses the 10.0... IP range. I followed the advice and used the workaround to reset the Airport Express to also an IP in the 192.168 range.
The light turns green on the airport express, but I can't see the remote speaker button on iTunes (version 6.0.1). I am able to go into my router and see that the Airport Express received an IP = 192.168.0.3. But using my iBook and the Airport Utility, I can't see the Airport express, but if I choose "other" and type in the IP address, I am able to open and configure and checked the remote speaker box and name it "Living Room". I open up iTunes, but I still don't see the remote speaker button in the lower right? Does anyone know what might be the problem?
Thanks,
David

Too bad... because that would have been an easy solution to the problem if it had been the cause.
It seems you have properly configured your Airport Express as a client on the D-Link router's wireless network - otherwise your Mac would not be able to communicate with it at all. Unfortunately, it seems something is still blocking communication between the Airport Express and your Mac - which explains why (a) the Airport Admin Utility is unable to automatically "see" the location of your Airport Express and (b) iTunes is unable to automatically "see" the location of your Airport Express.
At this point, I cannot see an obvious cause to your problem (other than observing that D-Link router owners seem to be more than their share of obscure configuration issues). Some have commented that a setting on the D-Link router for "long" vs "short" preamble is an issue. I'm not really sure the "subnet switch" workaround described in Ewen's article is really that important, and on that theory you might try doing a hard reset of your Airport Express and following the alternative configuration instructions for the Airport Express as described in this discussion by David Lovell (also works for Macs):
David Lovell, "Airtunes for XP with a Wired/Wireless network" #1, 08:05pm Jan 8, 2005 CDT

HT1515 do you need to connect the airport express to a router via ethernet or can it do it using wireless?

do you need to connect the airport express to a router via ethernet or can it do it using wireless?

There are 3 Apple routers....AirPort Express, AirPort Extreme and Time Capsule. Details here:
http://www.apple.com/compare-wifi-models/
Do you have one of these products in the living room?
If no, you can only use the AirPort Express by connecting to the router in the living room using an Ethernet cable at all times.

Can I use The Airport Express as a router only. Need your help

Hi there,
I need to get some help from anyone for a good wireless router for a MacBook Pro. I want to know if anyone had a Airport Express as a router only of some help in this matter.
Hope to get your feedback. Thanks
From Samantha Kellar

Can you explain a bit more?
The Apple Express is a router. The new Apple Express has a LAN port so you can have a device on a wired connection.
Are you talking about removing the modem and only having the Airport Express?

Since updating to Yosemite my airport express (used for airplay) connects for a short period then drops, the error message "An error occurred while connecting to the AirPlay device "Kitchen". The host cannot be reached." Has anyone else had this?

Since updating to Yosemite my airport express (used for airplay) connects for a short period then drops, the error message "An error occurred while connecting to the AirPlay device “Kitchen”. The host cannot be reached." Has anyone else had this problem

I'm having the same issue. Haven't found a workaround. I use a main TimeCapsule as my main router, also have another TimeCapsule that extends the network, three Airport Express and an AppleTV. For whatever reason, the two AirportExpress that I have in a different rooms cut out. I only have 600 square foot apartment so it's not that big, the signal should be strong enough. Airport Utilitiy reports the signal strength to be strong on all devices.
I'm using all new equipment, a new MacPro for my music, new TimeCapsules, new Airport Express, new everything with the latest Yosemite software. Very frustrating. My Airplay used to work very nice and now I'm constantly having issues and restarting my network. I did a fresh install of all my software on my MacPro when I got it in January so it's not as if it's an old machine with old software, everything is new within the last 6 months.
The only workaround I found so far is to unplug the devices and to plug them back in. Since upgrading to Yosemite, I'm restarting my Airport Express at least twice a week. Very annoying.

Can't connect to Airport Express using Linksys WRE54g?

I am having problem connecting to Airport Express using Linksys WRE54G, under the following circumstances.
Here's my setup.
I am using Linksys WAG200G modem/wireless router in the studies. My house is fairly big and very weak signal in living room. Hence I added Linksys WRE54G Wireless-G Range Expander in living room.
I have two HiFi. One in studies and the other in living room. macbook and external HDD where I store all my musics sit in studies.
I use Airport Express (AE1) to stream music from macbook to studies HiFi. Works fine.
So I connect AE1 to living room HiFi. Macbook still in studies. The problem is iTunes cannot connect to AE1 now. However I still able to detect AE1, open/change settings using Airport Utility on macbook in the studies.
Now I bring macbook to living room. AE1 works!
What I intend to setup is,
1. WAG200G, macbook and external HDD in my studies.
2. AE1 connect to studies HiFi. I am planning to get another Airport Express for living room HiFi.
3. Control the playlist using iPhone Remote and listen music in living room.
Question:
1. Did iTunes connect directly to Airport Express without going thru network router?
2. How should I setup Airport Express in this case?
Appreciate anyone who can help me on this. Thank you.

pss.
actually, is it possible to do what i'm trying to do... the guy in the Apple store said that i can connect to the Netgear router for my internet connection, and Airfoil can separately connect to the Airport Express to play music...
the way i've set it up so far, i can do either, but i can't do both... or do i need to somehow connect both wireless stations together...??

Can I add a second Airport Express using an Ethernet cable to extend my network if the first AX is wirelessly connected to an Xtreme?

Hi, I run a small motel and I am trying to extend the wireless network from the office to the rooms in the next building.
I have an AirPort Xtreme connected to my router with an ethernet cable and it works fine. I have then connected an AirPort Express to this in the next bulding wirelessly (as i cant run an ethernet cable outside) which extends the network over all but the last 2 rooms in the next building. There are bick walls so it sruggles over the distance. I realise I cant connect another airport express wirelessly to extend the network further but can I connect another Airport Express using and ethernet cable to the exisiting Aiport Express to extend the network that extra distance?

You can do this, but as you might imagine, that is going to place even more of a load on the weakest link....the wireless "hop"......between your AirPort Extreme and the current AirPort Express.
So, things will slow down even more. Whether or not that will be acceptable to your guests is open to question. Light browsing and email should be OK. Someone trying to download a large file is going to be waiting longer than they might consider normal.
Things like this, you simply cannot predict in advance. Might be a good idea to understand the store's return policy if the new Express puts more of load on the network than is expected.

Have installed Airport express using windows vista, unit blinks green, selected the speakers from itunes but get no sound at all, even if I put a headphone in the airport express. Pls advise

Have installed Airport express using windows vista, unit blinks green, selected the speakers from itunes but get no sound at all, even if I put a headphone in the airport express. Pls advise

If the AX is working properly, it should not show up in your list of available networks (since it is "joined" to your router). Have you unplugged and replugged your AX? Unplugged and, after a minute, replugged your router? Do you have MAC address filtering enabled on your router? (if so, disable it to see if the AX works ... it will broadcast its MAC address to the router, and you can add it.) Is your firewall turned on? Turn it off and see if you can access Airtunes. You will have to open a port in your firewall if that is the case.
The AX should have the same network name as your router the wireless tab. When it shows up, what name is it broadcasting?

Airport express used as external card to connect to motorola wr850g

i have a g4 with no airport card and i also have a motorola wireless router wr850g for wired and wireless connections. everything works fine however i want to connect my g4 to the airport express using the ehternet plug on ,y airport express. I have read other post that people have done this with there airport extreme base station and express. I just need to know how to configure my express card to connect to my network.
I read here that people did it successfully please tell me how
http://discussions.apple.com/thread.jspa?threadID=275083

i can set my wireless router to wds and airport x to wds. in the link in my post someone did it without an airport extreme. so i really need to know how to setup my airport express. i have been able to get it to connect to the airport express and give me a green light but no internet connection. it gives me an ip address from thedhcp server in my network preference pane.

Is it possible to stream music to an Airport Express using a wired connection?

I have an Airport Express (V7.6.3) hooked up to the music system and have tried everything I can find but get fairly frequent dropouts. Don't know if it's something the neighbours are running, but have pretty much given up trying to fix it. I have an ethernet that I can get to the Airport, but I can't find any current answers on hooking it up wired rather than wireless. (All previous hints at it use pretty old version of Airport Utility with options that aren't there in the latest version.)
Simply, what I want to do is connect the Airport Express using ethernet rather than wireless.... possible?
Thanks

Simply, what I want to do is connect the Airport Express using ethernet rather than wireless.... possible?
Yes of course, this is far preferable than connecting it to your router wirelessly, and doing so is almost guaranteed to fix your AirPlay dropouts.
Start by "hard resetting" your Express. If you connect it to your Extreme and try to reconfigure it without performing a "hard reset" first, the Express may cling to its wireless connection and bridge it back to your wired network, which will appear to crash everything and result in confusion.

How can I set up an older airport express using the newest airport utilities?

How can I set up an older airport express using the newest airport utilities? Seems like there isn't an option to set this up. Normally you could add/set up this in the airport setup assistant- but that doesn't exsist any longer.
Thanks for any suggestions

How can I set up an older airport express using the newest airport utilities?
Unfortunately you can't, since Apple dropped support of the older AirPorts with AirPort Utility 6.x.
Using some workarounds....not supported by Apple.....you might be able to download and install an older version of AirPort Utility that would allow you to administer the older AirPort.
See this thread for more details and instructions:
https://discussions.apple.com/message/21397085#21397085

Can I connect an A1084 model Airport Express using current version of Airport Utility

Can I connect an A1084 model Airport Express using current version of Airport Utility?

You will need an older 5.x version of AirPort Utility to be able to administer the older AirPort Express. That would mean that you need to have....or be able to borrow for 10-15 minutes......a Mac running Leopard (10.5.x), Snow Leopard (10.6.x), or a PC with AirPort Utility installed on the device.

HT4437 How to stream audio from a Safari web site to Airport Express using Airplay?

I'm able to stream audio from iTunes to my Airport Express using Airplay, but I can't stream audio from SoundCloud.com or any other system audio (not in iTunes) to the Airport Express. It is my understanding that AirFoil can do the trick but I do not want to spend 25$ if there is another way to do it.
Thanks in advance.

Tgara wrote:
grunta22 wrote:
I have played around and it's all fixed (not sure what I did and I don't think it was working all along), Tgara, you're right the icon colour has changed to orange for music (but still blue for you tube).
Cheers
Good you got it sorted!
I was wrong about one thing. Regardless of how I connect (e.g., wifi or Bluetooth), the Airplay icon in an Apple App turns orange when connected to a device, not blue as I mentioned above. This is probably why you see blue in the Youtube app.
OK, I am retracting all my posts about the airplay icon and it's color scheme.
Seems as if the airplay icon on the music app is orange, but the airplay icon on the podcast app is blue. There appears to be no rhyme or reason to these color schemes or their significance, so I am abandoning all further speculation.

PC cannot see wireless Airport Express using Ethernet on D-LINK DIR-655 Router

This seems to be a recurring issue going way back, but I have yet to see a real solution posted.
I am using my Airport Express (APX) to stream music from the computers on my network to my stereo via Airplay. I have APX set up to wirelessly join my existing wireless network, which uses a D-Link DIR-655 router hooked to a Time Warner cable modem. I can succesfully connect all of my wireless devices via Airplay, through iTunes to my APX, including two laptops and an iPhone. However, my primary desktop PC, which does not have a wireless card is linked directly via ethernet cable to my D-Link router, and it is not able to see my APX. I can, however, see the Airport Express from my PC through my Airport Utility by directly typing in the IP address. Note that the APX set-up option to allow Ethernet clients is checked. I also noticed that my laptops will stop detecting the APX if I directly connect them to my D-Link router via Ethernet and turn off their wireless cards. They will resume detecting APX when I turn their wireless connections back on. So, bottom line, I am convinced that this is not a firewall problem. Although I have tried every conceivable setting of my D-Link router and APX, I am convinced it is either a wireless to ethernet communication issue, or some obscure setting on APX.. Any help would be appreciated.
Thanks,
Wayne

I think I found the fix based on reading some Apple TV forums where several people were having the same problem. Under Advanced Network settings in the D-Link setup, I just checked "Enable Multicast Streams" and that seemed to do the trick.

Using Airport express for dlink router on a PC

Okay here is my question. I am trying to extend my netwok between my house and our guest house. I have a pc with a dlink router and modem. Bought a airport express thinking I could extend my network signal to the other house. There is about 50-60 feet between houses.
Followed the setup disk instructions onto the PC where the router and modem are. It is not letting me extend my network because I do not have an Airport Base station.
Is there any way to extend the network so I can have access in both houses.
I am not computer "network" savvy so I am a little lost. The guy at the apple store said this is possible. Was he wrong.
Please any help would be much appriciated

Unfortunately, you will not be able to use the AirPort Express Base Station (AX) to extend your D-Link's wireless network in a Wireless Distribution System (WDS) as only a few non-AirPort routers are known to be compatible.
You might want to consider another D-Link product, like the DWL-G710 Range Extender for your needs.

Airport express use as router.

Similar Messages

Maybe you are looking for