Airport Express uses in Hotels

Can the Airport Express be used by plugging Ethernet cable in Airport Express and accessing internet by means of a wireless connection with my MacBook with a secure hotel connection? Normal internet connections requires a paid subscription.
It would be nice to know that my laptop in a hotel is not limited to desk-only internet access when connection is to a Ethernet cable.

Does this have anything to do with the different electrical frequency? Anyways, a mac genius showed me the reset button and that seemed to have remedied the problem.
Apple provides AirPort Express Base Stations to meet most electrical standards throughout the world. The base stations are shipped with the appropriate AC adaptor for their intended country of use. Depending on where in Europe you used your AX and where you had bought it, you may not even been able to plug it in without the proper adapter. In additions, certain countries use the full 1-14 channels in the 802.11g radio band, whereas the US only uses channels 1-11.
What you may have experienced may have nothing to due with electrical requirements, but instead, you attempted to access a 802.11g network that was operating outside the channels supported by your device.

Similar Messages

  • How can I set up an older airport express using the newest airport utilities?

    How can I set up an older airport express using the newest airport utilities? Seems like there isn't an option to set this up.  Normally you could add/set up this in the airport setup assistant- but that doesn't exsist any longer.
    Thanks for any suggestions 

    How can I set up an older airport express using the newest airport utilities?
    Unfortunately you can't, since Apple dropped support of the older AirPorts with AirPort Utility 6.x.
    Using some workarounds....not supported by Apple.....you might be able to download and install an older version of AirPort Utility that would allow you to administer the older AirPort.
    See this thread for more details and instructions:
    https://discussions.apple.com/message/21397085#21397085

  • Since updating to Yosemite my airport express (used for airplay) connects for a short period then drops, the error message "An error occurred while connecting to the AirPlay device "Kitchen". The host cannot be reached."  Has anyone else had this?

    Since updating to Yosemite my airport express (used for airplay) connects for a short period then drops, the error message "An error occurred while connecting to the AirPlay device “Kitchen”. The host cannot be reached."  Has anyone else had this problem

    I'm having the same issue.  Haven't found a workaround.  I use a main TimeCapsule as my main router, also have another TimeCapsule that extends the network, three Airport Express and an AppleTV.  For whatever reason, the two AirportExpress that I have in a different rooms cut out.  I only have 600 square foot apartment so it's not that big, the signal should be strong enough.  Airport Utilitiy reports the signal strength to be strong on all devices.
    I'm using all new equipment, a new MacPro for my music, new TimeCapsules, new Airport Express, new everything with the latest Yosemite software.  Very frustrating.  My Airplay used to work very nice and now I'm constantly having issues and restarting my network.  I did a fresh install of all my software on my MacPro when I got it in January so it's not as if it's an old machine with old software, everything is new within the last 6 months.
    The only workaround I found so far is to unplug the devices and to plug them back in.  Since upgrading to Yosemite, I'm restarting my Airport Express at least twice a week.  Very annoying.

  • Can't connect to Airport Express using Linksys WRE54g?

    I am having problem connecting to Airport Express using Linksys WRE54G, under the following circumstances.
    Here's my setup.
    I am using Linksys WAG200G modem/wireless router in the studies. My house is fairly big and very weak signal in living room. Hence I added Linksys WRE54G Wireless-G Range Expander in living room.
    I have two HiFi. One in studies and the other in living room. macbook and external HDD where I store all my musics sit in studies.
    I use Airport Express (AE1) to stream music from macbook to studies HiFi. Works fine.
    So I connect AE1 to living room HiFi. Macbook still in studies. The problem is iTunes cannot connect to AE1 now. However I still able to detect AE1, open/change settings using Airport Utility on macbook in the studies.
    Now I bring macbook to living room. AE1 works!
    What I intend to setup is,
    1. WAG200G, macbook and external HDD in my studies.
    2. AE1 connect to studies HiFi. I am planning to get another Airport Express for living room HiFi.
    3. Control the playlist using iPhone Remote and listen music in living room.
    Question:
    1. Did iTunes connect directly to Airport Express without going thru network router?
    2. How should I setup Airport Express in this case?
    Appreciate anyone who can help me on this. Thank you.

    pss.
    actually, is it possible to do what i'm trying to do... the guy in the Apple store said that i can connect to the Netgear router for my internet connection, and Airfoil can separately connect to the Airport Express to play music...
    the way i've set it up so far, i can do either, but i can't do both... or do i need to somehow connect both wireless stations together...??

  • Can I add a second Airport Express using an Ethernet cable to extend my network if the first AX is wirelessly connected to an Xtreme?

    Hi, I run a small motel and I am trying to extend the wireless network from the office to the rooms in the next building.
    I have an AirPort Xtreme connected to my router with an ethernet cable and it works fine.  I have then connected an AirPort Express to this in the next bulding wirelessly (as i cant run an ethernet cable outside) which extends the network over all but the last 2 rooms in the next building.  There are bick walls so it sruggles over the distance.  I realise I cant connect another airport express wirelessly to extend the network further but can I connect another Airport Express using and ethernet cable to the exisiting Aiport Express to extend the network that extra distance?

    You can do this, but as you might imagine, that is going to place even more of a load on the weakest link....the wireless "hop"......between your AirPort Extreme and the current AirPort Express.
    So, things will slow down even more. Whether or not that will be acceptable to your guests is open to question. Light browsing and email should be OK. Someone trying to download a large file is going to be waiting longer than they might consider normal.
    Things like this, you simply cannot predict in advance. Might be a good idea to understand the store's return policy if the new Express puts more of load on the network than is expected.

  • Have installed Airport express using windows vista, unit blinks green, selected the speakers from itunes but get no sound at all, even if I put a headphone in the airport express. Pls advise

    Have installed Airport express using windows vista, unit blinks green, selected the speakers from itunes but get no sound at all, even if I put a headphone in the airport express. Pls advise

    If the AX is working properly, it should not show up in your list of available networks (since it is "joined" to your router). Have you unplugged and replugged your AX? Unplugged and, after a minute, replugged your router? Do you have MAC address filtering enabled on your router? (if so, disable it to see if the AX works ... it will broadcast its MAC address to the router, and you can add it.) Is your firewall turned on? Turn it off and see if you can access Airtunes. You will have to open a port in your firewall if that is the case.
    The AX should have the same network name as your router the wireless tab. When it shows up, what name is it broadcasting?

  • Airport Express (using AirTunes) with D-Link 614+ Router

    I have the following issue with my Airport Express not able to stream audio to iTunes. My configuration is an existing D-Link 614+ Wifi Router and I joined the Airport Express to my existing wifi network.
    I found a thread that says D-Link routers uses the 192.168... IP range and Airport Express uses the 10.0... IP range. I followed the advice and used the workaround to reset the Airport Express to also an IP in the 192.168 range.
    The light turns green on the airport express, but I can't see the remote speaker button on iTunes (version 6.0.1). I am able to go into my router and see that the Airport Express received an IP = 192.168.0.3. But using my iBook and the Airport Utility, I can't see the Airport express, but if I choose "other" and type in the IP address, I am able to open and configure and checked the remote speaker box and name it "Living Room". I open up iTunes, but I still don't see the remote speaker button in the lower right? Does anyone know what might be the problem?
    Thanks,
    David

    Too bad... because that would have been an easy solution to the problem if it had been the cause.
    It seems you have properly configured your Airport Express as a client on the D-Link router's wireless network - otherwise your Mac would not be able to communicate with it at all. Unfortunately, it seems something is still blocking communication between the Airport Express and your Mac - which explains why (a) the Airport Admin Utility is unable to automatically "see" the location of your Airport Express and (b) iTunes is unable to automatically "see" the location of your Airport Express.
    At this point, I cannot see an obvious cause to your problem (other than observing that D-Link router owners seem to be more than their share of obscure configuration issues). Some have commented that a setting on the D-Link router for "long" vs "short" preamble is an issue. I'm not really sure the "subnet switch" workaround described in Ewen's article is really that important, and on that theory you might try doing a hard reset of your Airport Express and following the alternative configuration instructions for the Airport Express as described in this discussion by David Lovell (also works for Macs):
    David Lovell, "Airtunes for XP with a Wired/Wireless network" #1, 08:05pm Jan 8, 2005 CDT

  • Can I connect an A1084 model Airport Express using current version of Airport Utility

    Can I connect an A1084 model Airport Express using current version of Airport Utility?

    You will need an older 5.x version of AirPort Utility to be able to administer the older AirPort Express.  That would mean that you need to have....or be able to borrow for 10-15 minutes......a Mac running Leopard (10.5.x), Snow Leopard (10.6.x), or a PC with AirPort Utility installed on the device.

  • Airport express used as external card to connect to motorola wr850g

    i have a g4 with no airport card and i also have a motorola wireless router wr850g for wired and wireless connections. everything works fine however i want to connect my g4 to the airport express using the ehternet plug on ,y airport express. I have read other post that people have done this with there airport extreme base station and express. I just need to know how to configure my express card to connect to my network.
    I read here that people did it successfully please tell me how
    http://discussions.apple.com/thread.jspa?threadID=275083

    i can set my wireless router to wds and airport x to wds. in the link in my post someone did it without an airport extreme. so i really need to know how to setup my airport express. i have been able to get it to connect to the airport express and give me a green light but no internet connection. it gives me an ip address from thedhcp server in my network preference pane.

  • HT4437 How to stream audio from a Safari web site to Airport Express using Airplay?

    I'm able to stream audio from iTunes to my Airport Express using Airplay, but I can't stream audio from SoundCloud.com or any other system audio (not in iTunes) to the Airport Express. It is my understanding that AirFoil can do the trick but I do not want to spend 25$ if there is another way to do it.
    Thanks in advance.

    Tgara wrote:
    grunta22 wrote:
    I have played around and it's all fixed (not sure what I did and I don't think it was working all along), Tgara, you're right the icon colour has changed to orange for music (but still blue for you tube). 
    Cheers
    Good you got it sorted!
    I was wrong about one thing.   Regardless of how I connect (e.g., wifi or Bluetooth), the Airplay icon in an Apple App turns orange when connected to a device, not blue as I mentioned above.  This is probably why you see blue in the Youtube app.
    OK, I am retracting all my posts about the airplay icon and it's color scheme. 
    Seems as if the airplay icon on the music app is orange, but the airplay icon on the podcast app is blue. There appears to be no rhyme or reason to these color schemes or their significance, so I am abandoning all further speculation. 

  • Is it possible to stream music to an Airport Express using a wired connection?

    I have an Airport Express (V7.6.3) hooked up to the music system and have tried everything I can find but get fairly frequent dropouts.  Don't know if it's something the neighbours are running, but have pretty much given up trying to fix it.  I have an ethernet that I can get to the Airport, but I can't find any current answers on hooking it up wired rather than wireless. (All previous hints at it use pretty old version of Airport Utility with options that aren't there in the latest version.)
    Simply, what I want to do is connect the Airport Express using ethernet rather than wireless.... possible?
    Thanks

    Simply, what I want to do is connect the Airport Express using ethernet rather than wireless.... possible?
    Yes of course, this is far preferable than connecting it to your router wirelessly, and doing so is almost guaranteed to fix your AirPlay dropouts.
    Start by "hard resetting" your Express. If you connect it to your Extreme and try to reconfigure it without performing a "hard reset" first, the Express may cling to its wireless connection and bridge it back to your wired network, which will appear to crash everything and result in confusion.

  • HT1515 Will Airport Express work in hotels in China? They require user name/password to connect. Has anyone used one there?

    I will be traveling in China with my iPad2 and want to use hotel wireless. It requires a sign-in with user name/password.  Can I use an Airport Express for this purpose? How do I set it up for that? I have an old Express (pre-2007); can I use it or do I need to upgrade to the new model?

    OK - I have never been to China but the posts here say that it can be done - the cable from the hotel should be connected to the WAN port of the Express - the Express should be in bridge mode and set to create a wireless network with a name and password of your choice - you can do this with a computer before you leave for China or with the iPad if you have previously downloaded the Airport Utility app - you would then connect to your network and attempt to bring up a web page such as Google - the hotel should then intervene and ask you for the login info that they have provided.
    Charlie

  • I want to use Airport Express in my hotel room using the wired internet connection, but I don't carry a computer, just my iPad.  Is that possible?

    I want to use AirPort Express when I am traveling.  I would like to use a wired internet connection in a hotel room to create a wireless connection.  However, I do not normally carry my laptop, just my iPad.  Is it possible to do this?

    You will have to pre-configure the Express using AirPort Utility on your computer before you leave on the trip. The Express will store and remember the settings.
    You might want to check with the hotel in advance to make sure that they have Ethernet ports available. Most hotels have switched to wireless and the others are not far behind.

  • Can i use the airport express in my hotel with wired connection?

    I'm going to be traveling quite a bit coming up and staying in hotels with wired internet connections in the room.  Can i use the airport express to connect with the hotel's internet connection and then my ipad and/or iphone 4S?  I'm new to Apple products so will certainly appreciate any info that may help.  Thank you!

    You will need to have AirPort Utility installed on the iPad and/or iPhone. It is free on the App Store
    App Store - AirPort Utility
    Connect the AirPort Express 802.11n to the hotel Ethernet jack using an Ethernet cable
    Power up the AirPort Express and wait 40-45 seconds
    Tap Settings, then tap Wi-Fi on the iPad
    Tap the AirPort Express under the heading of Set up an AirPort Base Station
    AirPort Utility will take a moment to to analyze the connection and then you can proceed with the easy guided setup
    Once the AirPort Express is configured, you should not have to set it up again at the next hotel. But, you could if you want to.

  • Using airport Express on a hotel ethernet to create a wireless network

    Hi there, yesterday I bought an airport express as I was lead to beleive it was the perfect device and simple to set up with regards to creating a wireless network from a ethernet connection in a hotel room. I seem to get a green light and seem to aquire a valid IP address of 192.168.2.102 and the AE utility doesn't state I have any problems and yet I cannot connect to the internet. I am from the UK and currently in Honk Kong on business for the next few days and desperately need to get a wireless connection sorted. I have read through many of the archives on these forum pages and it is still not certain to me whether I should be using bridged mode or not?
    btw, I can connect my pc and get internet access without any problems by ethernet directly into my pc.
    can someone advise me of the settings I should use given my scenario (ethernet connection in a hotel room). Given how much tme I have invested trying to get the AE to connect to the internet I would prefer to stick with it and get it workShort rather than taking the Airport Express back to the Apple store tomorrow and moving to a hotel with wireless and not ethernet connection.
    Help appreciated
    Russellb

    Hello, thanks for your suggestions. I have tried setting up the AE using my girlfreinds Win XP computer instead of my vista one and it setup 1st time without any problems. In fact, the options I got presented with were slightly different. Shocked at what a difference installation and setup can be from using a Vista laptop to a XP netbook. Maoin thing it is now working and you were correct about using it in bridged mode so many thanks.
    Russyb

Maybe you are looking for

  • Issue in assigning new Planning Calendar for MRP.

    Hello Experts I have trouble in setting up new Planning calendar for S&OP and MRP process. Let me explain in details Requirement is, currently I am using standard country specific Factory calendar format (monthly period) per plant. But new requiremen

  • GP: WebDynpro Application vs Web Dynpro (GP Interface)

    Hello, I've gone through some documents here in SDN. And I can't find a document that could give me a comparison between having a WebDynpro Application and WebDynpro (GP Interface) as callable objects. From what I understand is as for GP Interface (W

  • LOAD-OF-PROGRAM  IS EXECUTED AT EVERY PBO

    Dear All: I'm working with a ECC6 system, which was upgraded from a 4.6C. Concerning to LOAD-OF-PROGRAM:  When an ABAP program is loaded in an internal session, the runtime environment triggers the LOAD-OF-PROGRAM event, and the corresponding event b

  • LINE-IN, how do you get it to work?

    Hi I'm new to macs, and still learning. I use to use my PC a lot for music, now i want to use my mac. I am trying to record using the line-in jack on the back of the imac. Under sytem preferences I can see the volume bars moving when it's connected,

  • Adobe Flash Player 11.5 issue

    Hi, I have installed silently Adobe Flash Player 11.5 on Windows 32. It is detecting the correct version from http://helpx.adobe.com/flash-player/kb/find-version-flash-player.html. My issue is, when I install it and then uninstall it silently, then r