AirPort Express-Website isn't working

This is maybe a bit off-topic but the feature-part of the Airport Express-Website (http://www.apple.com/airportexpress/features/) isn't working. I'm not sure, if I want to buy one and the decision doesn't become easier when you can't see the features-page.

They may have moved it and/or changed the name.
Try this one.
http://www.apple.com/airportexpress/
and this
http://store.apple.com/us/product/MB321/AirPort-Express-AirTunes#overview
I have 3 or the above units and they work great.

Similar Messages

HT1515 How do i get my old AirPort Express (7years old) to work with my new Time Capsule?

How do i get my old AirPort Express (7years old) to work with my new Time Capsule?

Does anyone at Apple have help for this sort of question - I too have an old printer (HP LaserJet 5MP) that I would like to keep using on my Mac. (Mac OSX 10.6.8).
I got it working by getting a USB cord that connects to it - but every once in a while it just stops working for weeks. The mac 'sees' it and it sends the data because the printer lights start blinking but then it just doesn't do anything. Is there no one who can tell me (and raterada) how to get some new life into these old printers. I would rather not add this (and a new toner cart) to the landfill just yet. . .

The FormsCentral website isn't working.

The website isn't working. When I go to sign in, it takes me to a blank gray screen. What is going on?

This sounds like there might be an issue with your Flash Player. Have you tried another browser?
Please try this remedy:
1. Go to this link where you can manage your global flash player settings:
http://www.macromedia.com/support/documentation/en/flashplayer/help/se ttings_manager03.html
2. Make sure the "Allow third-party Flash content to store data on your computer" option is checked.
3. Make sure the slider is set to a value other than 0
4. Navigate away from the settings page (or close the browser window) to apply the changes.
Now try to sign in to FormsCentral

Why have all 3 airport express base stations stopped working, BT have checked and improved line still not working?

Why have all 3 airport express base stations stopped working, other users are on ipads and BT have checked and improved line but I still have an intermittent/no connection?

You must tell us the whole setup.. what is the main router?? How are the express connected to each other?
On ipad it works ok?? But you are on a computer?? MBP early 2011 running Lion?? That doesn't work.. even if you are right next to the main router??
Plugged in by ethernet does it work??
Have you installed a wireless diagnostic program.. ?? Actually Lion has one installed but hidden I believe.
Later version bought it to the surface.
About Wireless Diagnostics
If you do run Lion please install the 5.6 airport utility as it will give you loads more info on how the units are connected.. and link speeds for extend wireless.
How to load 5.6 into later Lion & ML
1. Download 5.6 for Lion.
http://support.apple.com/kb/DL1482
Click to open the dmg but do not attempt to install the pkg.. it won't work anyway.
Leave the package open on the desktop so you can see the file. AirportUtility56.pkg
2. Download and install unpkg.
http://www.timdoug.com/unpkg/
Run unpkg on the desktop.. If your Mac refuses to run the software, because it wasn’t downloaded from the Apple store, go to security in preferences and allow other software to work.. this is limitation of trade methinks. You can set back later if you like.
Now drag the AirPortUtility56.pkg file over to unpkg.. and it will create a new directory of the same name on the desktop.. in finder, open the new directory, drill down.. applications, utilities .. there lo and behold is Airport utility 5.6 .. drag it to your main utilities directory or just run it from current location.
You cannot uninstall version 6 (now 6.3 if you updated) so don't try.. and you cannot or should not run them both at the same time.. although I have had no problems when doing so.

I have internet optic fiber connection and I'm trying to configure it with my Airport Express but doesn't works, appears that I have IP and DNS, as I'm a computers dummy , who could help me to configuration it, please?

I have internet optic fiber connection and I'm trying to configure it with my Airport Express but doesn't works, appears that I have IP and DNS, as I'm a computers dummy , who could help me to configuration it, please?

You're welcome.
Voicemail is left at your carrier's server. That will continue to work unless you report your iPhone as lost or stolen with your carrier.
You may never find it again and you can't if the iPhone remains offline or out of service which means the iPhone is powered off or doesn't have cellular reception.

Lots of existing threads, but no consistent answer - what settings need to be applied to the 2012 (new) Airport Express for it to work at hotels with an ethernet only connection? Any answers specific to Japan would be helpful.

Lots of existing threads, but no consistent answer - what settings need to be applied to the 2012 (new) Airport Express for it to work at hotels with an ethernet only connection? Any answers specific to Japan would be helpful. I would prefer not to take my old Dell laptop and just be able to use my Ipad 2 via the wireless connection that the Airport Express creates. However, I can configure the Airport Express at home prior to leaving if that is the best thing to do.

I have a very similar problem with my AE! My MacBook, MacBook Pro & iPod Touch (1st Generation) all get a GREAT signal from our AE. BUT, our iPod Touch (2nd Generation) and new iPad (WiFi) get terrible signal strength unless we're right next to the AE!! Tech support at Apple is of no help! I'm ready to sell them all! This all started when we got the last OS update for iPod Touch/iPhone/iPad. So it must be a software issue not a hardware one..
Any ideas?

Just can't get Airport Express to configure: it worked at my mum's, but not at home!

Hello helpful people,
I am really hoping someone can think of what's going wrong with my set up. I keep getting an error message "an unexpected error occurred, please try again" when i try to do my configuration. I only want it to stream music from my ipad to my stereo. I would really prefer to do the set up only using an ipad, if at all possible.
I was given a shiny new Airport Express for Christmas. As i was staying at my mum's for two weeks, I plugged it into her stereo, and got it working. This was configured to join her existing wifi network, using only my iPad to set it up. The airport utility software was not used, as i didn't know it existed. All worked fine.
It looks as if my router is running WEP. So i gather i need airport utility to configure it. Airport utility says it can't detect a base station anywhere, even when inches away. There don't seem to be any options to get it to work differently.
I have reset and factory reset the device many times.
Some level of wireless access must be working on it, as it appears on my wireless list as a possible "set up airport express base station"
I go through the menus to set it up in the same way as at my mum's: selecting my existing wifi network to add it into, setting up a new base station password, and then watching and waiting.
Among the different resets and re-attempts i have done, it varies slightly in behaviour: the last time it failed it didn't get as far as asking for my wifi password.
After the error message i can't "try again" as suggested. It wipes out my wifi access, so i need to delete my existing wifi network (on the ipad) and re-add it to get an internet connection back again. I need to do a reset to get the "configure new base station" message back.
The differences between the two houses:
The stereo connection is different in the two houses: single 3.5mm jack into mum's; 3.5mm jack split into two needed for our stereo. I know it says you need to plug into the stereo first (and I have), but surely the device doesn't care which cable i use?
At my house, the wireless router and airport box are within 4m of each other. At my mother's it's more like 20m.
My wireless router is from O2 (now Sky), my mother's is plusnet.

It looks as if my router is running WEP.
Virtually no security at all there, as there are numerous free utilities available on the Internet that will crack a WEP network in seconds. You might as well run the network wide open, since WEP offers about the same level of protection.
You will not be able to configure the Express using an iPhone, iPad, or any version of AirPort Utility that is 6.x or higher with your router set to use WEP "security". They will not work with WEP, since it is so long out of date and non-secure.
An older version of AirPort Utility 5.x might allow you to configure the Express using WEP security, but with no protection anyway, this would be of little value.
See if your router can be configured to use WPA2 Personal security or WPA/WPA2 Personal security. If it can, then you will be able to use an iPhone, iPad, or any version of AirPort Utility to configure the Express in just a few minutes.
If your router cannot be configured to use stronger current WPA settings, now might be a very good time to ask your service provider for a new router.

2008 Airport Express utility doesn't work all of a sudden, name reverted to ID, lost security, message not supported.

The Airport Express I purchased in 2008 worked fine this morning, but when I tried to use Wi-Fi with my cell phone and iMac the light was green on the AE but no signal. I unplugged AE and unplugged my modem, plugged in my modem, plugged in my AE, it turned green but no signal - that is, the name I had given it did not appear on either my iMac of cell phone. Then, out of the blue, the original ID for my AE shows up on the iMac and phone and when I selected it my Wi-Fi worked, and is working. The problem is there now is no security. I got a message that Airport Utility did not support or something like that. So then I took the old CD that came with AE (in 2008) and loaded that on my iMac so I could re-establish WPA security. It seemed to load okay but then the following message popped up, "AirPort can't be installed on this disk [my Macintosh HD]. The version of Mac OS X on this volume is not supported." Well, yes, since I'd purchased my AE I'd gone through all the cats and recently had upgraded to Mountain Lion, 10.8.5, several weeks ago. But since this morning I had done nothing new.
So, it's 12:30am, Apple Care is not open - I'm not even sure I'm still covered - so maybe some night owl out there can tell me what I need to do. I'm beginning to suspect it might have to do with my operating system upgrade, but don't understand why this problem should suddenly crop up after several weeks. Any ideas out there? Oh, and incidentally, my AE was cutting off a lot about a year ago and I took it into an Apple Store and they did something with the software in the device and the cutting off improved but still would occur at least twice a week - something I just lived with.

Then, out of the blue, the original ID for my AE shows up on the iMac and phone and when I selected it my Wi-Fi worked, and is working.
My first thought is that the AirPort Express is normally good for 4-5 years on average, so you may be getting some signals in that regard.
The AirPort Express reset itself back to factory default settings. The big question now is if you re-configure it again whether it will hold those settings. Not likely....my opinion.
The other problem that you have is that Mountain Lion operating system no longer supports the older version of the AirPort Express that you have.
Oh, and incidentally, my AE was cutting off a lot about a year ago and I took it into an Apple Store and they did something with the software in the device and the cutting off improved but still would occur at least twice a week
It's really time for a new AirPort Express, which will offer much faster reliable performance....and it will be compatible with AirPort Utility on the Mountain Lion operating system.

Airport Express suddenly no longer works

I'm thinking from reading the boards that it may have something to do with the 6.3 update, but in case anyone else has any suggestions, I wanted to outline my new problem.
Computer worked (wirelessly) absolutely fine this morning (G5 imac, Airport Express).
Got home tonight - internet connection was no longer working.
I ran my own diagnostic - the airport and the computer are talking, green light on the airport, network showing up in the drop down menu. This means it's a cable problem, right?
No. All of the cable modem lights are still working, but just in case, I unplug everything to reset.
I reset, still having the same problems.
I spend an hour (2 phone calls) to cable company, who resets my modem, yells at me for using wifi (they refuse to provide support to anyone who uses a router), but points out that if I plug the modem directly into the computer, I'll know whether it's actually the internet connection.
So I do this (annoyingly, I might add, since the wifi has previously enabled me to have my modem in the living room near the stereo, and not in my office). After stringing wires everywhere, voila! I have internet (as evidenced by this interminably long post). However, when I reset everything again to use the Express, I'm back to the same problem. All the lights on every device say it's a go, but nothing (e-mail, internet, etc.) loads. When I run the diagnostic presented in safari, all lights are green except second to last, "Internet". Gee thanks for that obviousness.
Cable company won't help me at this point, because as far as they're concerned, when the computer is hooked up "correctly", as in hard line to my computer (as in, not violating their terms of service), it works perfectly fine.
I read a few things here, and try a hard reset on the express. no luck (and yes, I know to reset, repower, etc. all the devices before each attempt). The ONLY thing that I did was yesterday, when I ran all the software updates on my iMac. Doesn't explain why it was working this morning...
I've had this airport for several years. I've set them up in all of parents', friends, etc. homes. I've never had a problem like this (I've had plenty of problems, but they always have fairly obvious symptoms - lights out or yellow or whatnot that hint at something wrong).
Any suggestions would be greatly appreciated

Thanks for the quick response! just to give some further detail...
• Turn off the Airport card and then turn it back on.
-- I did this during the initial attempts (all further attempts will have to wait until tomorrow, as it's past my bedtime)
• "network showing up in the drop down menu" with a check mark next to it?
-- yes, the network has always shown up.
• This thread has a user with a bogus DNS entry.
• Does your Powerbook work?
-- I'll try these tomorrow
• What IP are you getting on your iMac?
-- I was getting the standard 10.10....address created by the airport.
• Create a new Location on your iMac's Network System Preferences and re-create the Airport connection
• Keychain First Aid?
• Temporarily connect via ethernet directly to the Express and check it's configuration again.
• Reset the trusted networks.
-- I'll try all of these tomorrow
Good Luck!
-- Thanks!
iMac G4; PowerBook G4
iMac G4; PowerBook G4
iMac G5; PowerBook G4

I have a Cisco wireless router. Can I buy an Airport Express plug in booster for a distant part of my house or do I need an Airport Extreme base station instead to make the Airport Express plug in booster work?

Can I buy an Airport Express plug-in wifi signal booster to connect to a Cisco wireless router, or do I have to buy an Airport Extreme base station to make the Airport Express plug-in work?

You would need either an AirPort Extreme or an AirPort Express connected to the Cisco router, with a permanent Ethernet cable connection.
Configure the Extreme or Express that is connected to the Cisco router to "create a wireless network".
Then, you could add an AirPort Express to "extend a wireless network" to provide more wireless coverage for the network that the Extreme or Express would be creating.
Remember that the Express can only "extend" the quality of signal that it receives, so it must be located where it can receive a strong signal from the "main" AirPort.
If you don't need the Cisco wireless signal, you could turn it off.....or use that network for guests or something similar.
The bottom line here......you always need two Apple routers if you want to extend the network wirelessly.

AirTunes / Airport Express / Windows XP not working together

Here's the issue. I have two PCs available to me; a laptop from work that is tightly locked down by our paranoid IT dept, and a family desktop that has the iTunes library within it. I purchased airport express so that I could stream to my stereo. The laptop does not have iTunes on it, the IT dept having cunningly deployed some way of blocking its install. They did not, however, block airport utility.
Both computers connect happily over wireless to Verizon FiOs and on into the wider world.
1) The laptop's airport utility will happily locate and allow configuration of the express unit.
2) The desktop unit, however, does not find the airport express at all finding no apple wireless devices. However, knowing from the laptop (and from direct to the fios router's network map utility) I can tell airport utility to "configure other" supplying the express' IP address and p/w. Then it finds it and can configure away until I hit the update button. It then can find it no longer until I configure other again.
The point is, iTunes / air Tunes, hosted on the same desktop, displays, I suspect, similar behavior. It never finds the "speakers".
I have tried switching off Norton's firewall altogether, the windows firewall altogether, going w/o any WEP or WPA without luck. Also, I have tried configuring the unit as first as a "joining an existing wireless network", and, second, as it own new wireless network again without avail.
I have spent 4 hrs with Apple support and we thought we had it licked; the speakers appeared briefly after switching to a "bridge" connection share mode. The speakers duly showed up. Letting the gentleman go off the phone in triumph, I stupidly neglected to test the connection from iTunes through to the amp and ran into the error code 15000. Trying some of the ideas in these and other forums to beat that then led me back to square one, never seeing the much anticipated speakers again.
Any ideas out there?
Thanks much!

I detected a problem with Airport+iTunes in Vista and some XP machines.
I have 3 machines: Lenovo 3000 N200 Vista, Compaq nx9010 XP and Asus EEE Top XP.
On the Compaq, APutil and iTunes perform flawlessly 100% of the time. However, on the Lenovo and the Asus, ApUtil doesn´t detect my 2 Airport Express, and iTunes will drop the connection after 30-60 minutes. Then I have to restart iTunes in order that it "sees" my Airports again.
At first, I thought it was a problem with Vista. Later, as it happened on my Asus XP, I thought it was a hardware/driver compatibility problem. Then I decided to make some experiments.......
I found that at startup, 2 processes are activated: iTuneshelper and APAgent.
I cancelled both of them. Voila ! Suddenly APUtil detects my Airports, and no more dropped connections in iTunes !!!!!
Now, it remains still unanswered to me: Why did the problem not happen on my Compaq ???

HELP - Website isn't working for me but working for everybody else

Hey I'm new to this site so I'm sorry if this is in the wrong section!
So I've been getting annoyed lately because my website (www.curtiskeay.com) isn't working for me and just redirecting me back to my hosting website saying that the website is 'coming soon' but it works for everyone else that has tried loading it, so it just seems to be me that it's not loading for.
It works every now and then but very rarely for me, so it makes me feel that the site is down but really and truly it's just not loading for ME. It works perfectly fine at home on my wifi on my phone which is android and I use google chrome. I know this isn't probably a Apple related problem but I was unsure where else to post this.
If anyone can give me any kind of help it would be greatly appreciated!
Thanks,
Curtis

It's working here.
Try this.. from your Safari menu bar click Safari > Preferences then select the Privacy tab.
Click: Remove All Website Data
Now empty the Safari cache.
Back to Safari > Preferences. This time select the Advanced tab.
Click: Show develop menu in menu bar
Now go to the menu bar, click Develop > Empty Caches
Quit and relaunch Safari then try your site.

Airport Express and Airtunes not working

Hi all. I have a Digital Audio G4. I've been able to use my G4 with iTunes and my Airport Express for quite a while. All of sudden iTunes no longer sees it. The Airport Admin Utility doesn't see it either. But I can still connect to the internet with it. What makes this even weirder is, I also have a MacBook Pro. The MacBook Pro has no problem seeing the Airport Express in the Airport Admin Utility and in iTunes.
Any Help you can give is much appreciated.

I can't offer any help. I am having the same problem except I have an Airport Extreme with the Airport Express acting as an extender. The only thing that works for me is unplugging the Airport Express and plugging it back in. Sometimes it is fine the entire day. Other times I have to do this multiple times throughout the day. I don't think this is a good, long-term solution. Any help anyone?

Printing from XP to Airport Express-connected printer stopped working

We have an HP printer hooked up to an Airport Express. We have a Windows XP machine that has been set up to print using Bonjour and the Airport, and it has been working for months. Suddenly, it is not working. Documents get to the printer queue, but then error out.
We also have a Power Mac set up, running Tiger, that still works. We can also hook up the printer directly to the Windows PC and it prints fine. We have tried the following:
-Recreating the printer in Windows. (The Bonjour Wizard finds the printer just fine.)
-Reinstalling Bonjour 1.04
-Restarting Windows and the printer and the AE (several times)
-Turning off the firewall
-Printing documents from multiple applications
-Creating a printer with a generic driver
No matter what, the document errors out in the printer queue when we try to print wirelessly from the PC. We don't know exactly when this started, because we haven't printed anything in a while. We can't think of any changes that have been made recently, except for automatic Windows updates. Has anyone else seen this problem recently? Any suggestions?

Excellent...great find! Had the same problem. Mac PB and two PC laptops on XP via Bonjour have been printing fine for many years through an Airport Extreme to an HP 7300 AIO printer. Then one day last week the Mac continued printing fine over wifi to Airport Extreme but both PC's (one Dell and one Compaq) stopped printing both via direct wired USB and wifi through the AE. Microsoft must have put out an update that hosed something on the XP side. Tried reinstalling drivers, deleting and rebuilding bonjour printer, resetting devices, etc. Nothing fixed it. Found this link and reconfigured the port as mentioned above to AE's IP address, RAW setting was already set, and they are now printing fine again. Thx for the help!

Airport Extreme, Airport Express network extending not working

I have had the Airport Extreme base statin for a while now and have had it running fine on my two computers, ones a Macbook Pro and the other is a Sony laptop. My brother recently moved in with me and he has not been getting a good enough signal to run his computer off the extreme. We bought the Airport Express to be an extender of the network. I have tried about every configuration in setting it up but for some reason his computer does not want to work. He is also using a Sony, but an older Sony with Xp and no Wireless Card, so he is using a Wireless USB adapter. I can set everything up, everything is Green and he still can't use the network, what is even more weird is that his computer wont even see the Airports in Airport Utility. Any ideas on what to do next?

I am pretty sure that it does. He can get the signal and access the internet, every once and a while, the other night it worked for an hour straight before it stopped working and hasn't worked since. I am about to take back the USB wireless adapter and try something else. I am so frustrated because he wont get off my back.

AirPort Express-Website isn't working

Similar Messages

Maybe you are looking for