Airport Express WiFi issues after Yosemite and iOS update

Since the most recent software updates for OSX and iOS my WiFi has been acting up. Sometimes it works and sometimes it doesn't. I've noticed that Safari does not work most of the time, yet I can open Chrome (on either Macbook Pro, Macbook Air, or iPhone 6) and the website I was trying to access in Safari will open instantaneously. I just recently upgrade my Xfinity internet from the Performance package (25 mbps) to the Extreme package (105 mbps) and thought these issues were related to the upgrade, but we also have a Windows 8.1 hardwired and it streams consistently. I have seen a few other posts related to this issue, but have yet to find a resolution.

bump

Similar Messages

  • Can't sync files on Cloud Drive between Macbook and iPad after Yosemite and IOS 8.02

    can't sync files on Cloud Drive between Macbook and iPad after Yosemite and IOS 8.02
    Pages, Numbers and more won't sync.

    Er OK efter opdatering til IOS 8.1
    Til gengæld er Photo funktionen (synkronisering) blevet dårligere (for dårligt)

  • Can't configure airport express with laptop after 10.5.6 update

    I can't configure airport express with laptop after 10.5.6 update
    the airport express is seen but can't access configuration screen, I get the spinning wheel forever.
    Other computer gets to the configuration screen without problem.
    And the airport utility describes the airport express like this: syAP.802.11format

    I downloaded the airport utility and re-installed
    and the problem was solved

  • Does the first generation Airport Express work on newer Macs and IOS devices?

    I would like to know if an older Airport Express(M9470LL/A) will work on:
    Macbook Air 2011
    iPhone 4
    iPod Touch 2nd Gen
    iPhone 3Gs

    Check again very carefully and make sure that you are downloading the correct AirPort Utility 5.6 for Mac OS X Lion
    You likely downloaded AirPort Utility 5.6.1 for Mac, which is only for Snow Leopard and Leopard operating systems.....so it will not run on Lion.

  • Ipad 2 Wifi issues after upgrading to ios 7

    I live in a small house, 750 sq ft area (30 x 22). Ipad wifi was working fine in all the rooms before upgrading its iOS to 7. After ipad2 iOS was upgraded to iOS 7, wifi now works in the room where the Wifi router is located. But does not receive Wifi signal in any other room. I tired everything that has been suggested in the forum - like changing the router settings (channel, security etc),playing with ipad2's wifi, etc. etc. But to no avail!
    Clearly the bug in iOS 7 has caused this issue! How does one log this issue with Apple tech support team so they can rectify this issue in iOS 7 patch? Also, please let me know if I should be trying anything else. Thanks!

    I have exactlythe same issue. Have had ever since the upgrade to iOS 7. It's nothing to do with the router. It has to be a bug in iOS 7. Question is, would upgrading to iOS 8 help at all???  Anyone done this.??  I used to love my iPad and it was never out of my hand. Now I just hate it and use my Kindle Fire all the time instead. I used to pick up wiif signals across the street. Now I have to be sitting on a router to connect.
    <Edited by Host>

  • My iphone start having speed, keyboard and wifi issue after ios8.1.3 update

    Hi community, i am using i phone 5, i was highly satisfied with that one,  With Fast speed and good network and wifi coverage,
    never had any issue. since i am using ios7.
    But the time since i updated my i phone 5 (16gb / ios7.1.2) to ios8.1.3 i start having issues which are never ending.
    * Slow down speed of keyboard and its strucks while typing.
    * Using application are not faster than before.
    * on ios 7 i was getting 35-45 mbps download and 25-40mbps upload speed, while after updating  ios 8.1.3  it became slow to  9.68 downloading speed and uploading is 1.68mbps which became worst.
    * i deleted my all data freed my memory 5.5 gb after update still its very slow.
    * reset ed multiple time even by iTunes and i cloud, but nothing works
    * i backup-ed  data on i cloud and while restoring its taking more than 2 days just to restoring my all data.
    meanwhile  my iphone 5, 16gb is now became bunch of problems
    please apple i dont want to loose my device please help me out plz fix these bugs i tried every diagnosis step  nothing have been solved.
    plz help..............................

    Hi community, i am using i phone 5, i was highly satisfied with that one,  With Fast speed and good network and wifi coverage,
    never had any issue. since i am using ios7.
    But the time since i updated my i phone 5 (16gb / ios7.1.2) to ios8.1.3 i start having issues which are never ending.
    * Slow down speed of keyboard and its strucks while typing.
    * Using application are not faster than before.
    * on ios 7 i was getting 35-45 mbps download and 25-40mbps upload speed, while after updating  ios 8.1.3  it became slow to  9.68 downloading speed and uploading is 1.68mbps which became worst.
    * i deleted my all data freed my memory 5.5 gb after update still its very slow.
    * reset ed multiple time even by iTunes and i cloud, but nothing works
    * i backup-ed  data on i cloud and while restoring its taking more than 2 days just to restoring my all data.
    meanwhile  my iphone 5, 16gb is now became bunch of problems
    please apple i dont want to loose my device please help me out plz fix these bugs i tried every diagnosis step  nothing have been solved.
    plz help..............................

  • TS1398 anyone else having wifi issues after 6.1.2 update?

    I have recently updated to 6.1.2,
    Firstly had a number of issues updating,
    once it finally completed, i restored from Icloud, (using my home wifi) which i was able to conect to no problems,
    however once the restore completed, the wifi lost connection and now will not connect, meaning none of my apps will restore??
    anyone else experiencing this or have any suggestions?
    thanks

    Hi zachys_mommy,
    Thanks for visiting Apple Support Communities.
    You can use the steps in this article to troubleshoot the internet connection on your iOS devices:
    iOS: Troubleshooting Wi-Fi networks and connections
    http://support.apple.com/kb/ts1398
    Best Regards,
    Jeremy

  • All my events merged into one after Yosemite and iPhoto update

    I am running iPhoto 9.6 on Yosemite 10.10. Some short time after updating iPhoto, I found all my events had merged into one. I tried to find the old library, thinking I could tell iPhoto to use the old library, but couldn't find it at all. Then I thought I could go into Time Machine, which I tried several times, and restore my Mac to two days ago before this happened. But that did nothing either. Can anyone help?
    Thanks.

    basically you are doing something wrong - events do not merge on their own and if you are running TM then you can restore the iPhoto library from ir - Mac Basics: Time Machine backs up your Mac
    You can use the autosplit  command to split the "big" event according to your preference settings
    LN

  • I am facing wifi and mobile 2G signal issue after upgrading to IOS 6 from IOS 5 in IPhone 3GS. Please help, restoring setting even didn't helped.

    I am facing wifi and mobile 2G signal issue after upgrading to IOS 6 from IOS 5 in IPhone 3GS. The mobile carrier signal as well as WIFI suddenly drops zero and are then restored automatically. Sometimes i cannot conenct to WIFI even standing infront of WIFI router. Please help, restoring setting even didn't helped.

    Update: my phone's connecting to the WiFi again. I don't know what did the trick. I did nothing since reinstalling the software. It hadn't worked then, it is now. I tried connecting to my dad's phone's hotspot( he uses a Moto G), and it worked. I then tried connecting to the WiFi at a friend's house, and when I came back home, my phone was able to connect to my WiFi! Is it of any significance that my friend's router doesn't require a password? My issue has been resolved( for now; I hope I'm not counting my chickens before they've hatched). For anyone facing a similar issue, I suggest you try everything I did:
    1. Turn your router off for a minimum of 30 seconds, turn it back on and try connecting.
    2. Click on the WiFi network you are connected to, scroll to the bottom, tap "Renew Lease".
    3. Do a soft and hard reset.
    4. Reset network settings.
    5. Back your data up, erase all content from settings menu, restore from backup.
    6. Reinstall your software( put it in recovery mode).
    I am not sure which of the above worked for me. Make sure you try everything. If none of the above works, take it to a genius bar or an authorised service provider. Good luck! :)

  • Want stream Netflix to blueray via Airport Express wifi. The blueray finds my wifi but the wireless connection failed - said, Ensure DHCP server is enabled on router and restart router. Don't think I have DHCP server. Suggestions anyone?

    Want to stream Netflix to blueray player via my existing Airport Express wifi. The player finds my wifi but the wireless connection fails - says, " Ensure DHCP server is enabled on router and restart router." I don't think I have a DHCP server. Suggestions anyone?

    I can't speak specifically regarding LG, but the Whole Home feature on Direct TV (record a movie on one DVR and watch it on another TV in another location) just won't work with wireless, and I have a strong fast connection at 300 Mbps. Ethernet works perfectly.
    Few audio/video products will accept "n" wireless at 5 GHz. I suspect that your LG accepts a 2.4 GHz signal, which would top out at 130 Mpbs.
    If you are trying to stream High Definition video, especially at 1080P, my opinion would be that it is unlikely that you will be able to do so reliably using wireless.
    Perhaps another user who has figured out how to do this will post with some input.

  • WiFi issue after 6.1.2 upgrade

    I upgraded my OS to 6.1.2 and now I'm having troubles connecting to the internet at work.  I did reset my network settings and inputted the appropriate password and still having issues.  It identifies the network but when open safari or an app requiring internet connection it goes nowhere.  Is anyone else having this issue.  Does anyone know how to fix this problem.  Keep in mind my connection works fine at home.

    Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
    http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    Wi-Fi Fix for iOS 6
    https://discussions.apple.com/thread/4823738?tstart=240
    iOS 6 Wifi Problems/Fixes
    How To: Workaround iPad Wi-Fi Issues
    http://www.theipadfan.com/workaround-ipad-wifi-issues/
    Another Fix For iOS 6 WiFi Problems
    http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
    Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    How to Fix a Poor Wi-Fi Signal on Your iPad
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
    iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Connect iPad to Wi-Fi (with troubleshooting info)
    http://thehowto.wikidot.com/wifi-connect-ipad
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • Unable to use iMessage on Mac with non-IOS contact with Yosemite and IOS 8.1

    I have an iPhone, an iPad running IOS 8.1, and a Mac running Yosemite.  I have set up all 3 to use iMessage, entering the codes as requested.  The 2 IOS devices work fine and the Mac works fine on messages to contacts with iPhones but non-IOS contacts remain red and are not accepted and if I try to send a group message with a non-IOS contact I get  "XXX cannot be added to the group chat - XXX is not registered with iMessage".  I have tried deleting and replacing the contact and it still will not accept her.  I understood that this would be fixed after updating to Yosemite and IOS 8.1 but the upgrades have not resolved the problem for me. 
    In my Mac iMessage preferences:
    1-I am signed in with my Apple ID and the account is enabled. 
    2-In the "You can be reached for messages at" field, I have my iPhone number, preceded by a +1 and the area code and 3 email addresses (icloud, me, and gmail)
    3-in the "Start new conversations from" field, I have my cell phone number  - also with a +1 and area code.
    4-I have checked all of my Apple ID and iCloud details and they are all correct. 
    All other Handoff features appear to be working correctly.  Any help or suggestions would be appreciated.  Thanks very much -
    Mary Ellen

    Hi,
    It will suggest and look like it will auto-complete until you type further.
    As 204 is unlikely to be the full number the issue does not arise.
    For instance if I start typing my name every option that I have listed with my name over three Contacts card (for my three computers) and some Accounts not linked to Address Cards are listed
    Of course this lists also shows cross connections between the accounts making the list longer.
    10:13 pm      Thursday; February 26, 2015
    ​  iMac 2.5Ghz i5 2011 (Mavericks 10.9)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad

  • IPad 2 Wifi Problems after upgrading to iOS 6

    I Updated my iPad 2 to ios6 then day iOS6 was released, ever since then i have been unable to connect to the wifi. I've reset the network setting and the wifi works for about 5 minutes until i go on any apple app ( itunes, app store, maps etc). I've reset the Network settings more than once, I've turned the HTTP proxy to auto, I've pressed Renew Lease, I've unplugged the wifi, and I've pressed Forget this network. Reluctantley i updated my ipod touch 4 gen to see if iOS 6 was the problem and I now have the exact same problem on my ipod touch. Someone Help!!

    iOS 6 Wifi Problems/Fixes
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting
    http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet
    http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • Clicking sound originating from Airport Express firmware 7.5.2 and later

    Hello,
    I have submitted a bug report through Apple Developer Connection (I am a registered developer). By posting this here I want to get support for our case: Make Apple fix the Airport Express firmware.
    Summary:
    The Airport Express device has a bug which appeared first in version 7.5.2. It produces a "clicking" sound when using AirPlay to transport music from an iPhone or a Mac, when certain frequencies are being played. This is not depending on the attached amplifier or headphones, digital or analog output, network settings (network created by Airport Express or not), Mac or iPhone used, audio cable or power supply involved or due to bad quality of the sound file played. The problems are not there when audio is played directly from a Mac or an iPhone through headphones or optical out. We and my colleagues (developers and audophiles) have ruled out all the other options. The problem boils down to a change in the Airports firmware starting with 7.5.2. In 7.4.2 the clicking sound is not there.
    Steps to Reproduce:
    Play the following song via AirPlay on an Airport Express device having firmware 7.5.2 or higher. The Airport Express being used in our tests is the model produced from March 2008 – June 2012. Attach high fidelity headphones (like Bowers & Wilkins P5, which we used) to Airport Express. Alternatively use a very good amplifier/loundspeaker setup. We also reproduced the bug for example on an Onkyo A-9070 amplifier with both optical and analog connection - there is no difference there. The loudspeakers we used are passive Dynaudio X12.
    Play track no. 6 from the "Songs without words" album: http://itunes.apple.com/de/album/lieder-ohne-worte-op.-67-no.-2/id209380163?i=20 9381206
    Listen to this solo piano piece carefully for at least 40 seconds. You will notice a clicking sound with high frequencies. This clicking is *not* there in firmwares 7.4.2 and earlier.
    Expected Results:
    Perfect audio quality as in firmware 7.4.2 and earlier.
    Actual Results:
    Reproducible clicking sounds in high frequencies.
    Regression:
    This problem appeared first in Airport Express firmware 7.5.2 and has not been fixed yet. It can also be observed in the current version of Apple TV (as of September 16th).
    Notes:
    This issue, while not being recognized by the casual listener, makes AirPlay unusable for critical listening - at least when using any firmware after 7.4.2. I would love to use the current firmware (which produces a much more stable connection), but I (and other audiophile AIrplay users) would love to see this issue fixed first.
    Here is a thread that concludes - as we did - that Airport firmware 7.5.2 and later is the source of the problem. It is not the hardware, neither Apple's, nor the connected devices:
    https://discussions.apple.com/message/17296916#17296916
    Hope this helps!
    Best,
    Gabriel

    I'm having the exact same problem. As a classical music lover, this is driving me nuts. It's especially noticable in soft passages in the music, when the volume is turned up high. When the dynamics increase, the little pops/clicks appear (they sound a bit like static noise, as someone stated earlier in this thread). It happens at irregular intervals. When you play pop music, the clicks will disappear (drown) in the music. But for true audiophiles who listen mainly to jazz and classical music this is a severe problem.
    I have checked everything and it's definitely an airplay issue. My apple lossless files are 100% okay and play without any problem, except when streamed via airplay. Also, it makes no difference whether you use the analogue or the optical ouptut from the airport express.
    I've created a sine frequency sweep myself in Adobe Audition, from 20 Hz up to 20000 Hz with a duration of 25 seconds and a level of -6 dB. 
    When played through airplay, the clicks always start to appear after 4 seconds in the sweep, only to disappear at 23 seconds.
    The clicks manifest themselves at different volume levels. To my ears, they make the same sound as when you change the volume in iTunes when streaming music through airplay. Only when you set the volume in iTunes extremely low, the clicks will disappear.
    Apple engineers should use a frequency sweep to recreate the problem, as this is very revealing.
    PS: file format isn't an issue here. I've converted the Apple Lossless file to MP3, and it makes no difference at all.

  • Why doesn't my airport express router issue proper DNS server address to DHCP clients?

    I have an Airport express router (version 7.6.4).  It was configured to connect to internet via a cable modem, acting as a router with NAT. This means it obtians WAN address from cable modem, and in LAN it assumes IP address 10.0.1.1 as a gateway, and issue IP address to my 4-5 wireless clients (MBA, iPads, PCs) vi DHCP.
    However I recently encounter an issue, that the router no longer issues DNS server address obtained from Cable Modem(206.x.x.x) but instead tell every DHCP client to use router ip address (10.0.1.1) as DNS server. I was pretty sure before Dec 2013 it is issueing (206.x.x.x) to all DHCP clients.
    Apparently now the Airport express is acting as a DNS server or as a DNS cache. This works sporadically and very often result in long DNS look up or DNS look up failure.
    Is this a bug or is it supposed to do so?  Any configuration can turn it off so Airport express will issue Cable modem obtained DNS server to DHCP clients?
    My network otherwise works fine. for some of the Clients (e.g. one MBA) I configured DNS for it mannually and it's internet is working very smoothly.

    But this will be a problem for my ipad and iphone that uses wifi.
    These devices either allow full DHCP. If you need to mannually enter DNS server, you will need to turn entire IP configuration to mannual and that will be a problem for me.

Maybe you are looking for

  • HT1495 I have 2 iPhones for 2 different phone numbers and a new ipad. Is it recommended to use 1 Apple ID or not?

    I have 1 phone number with an iPhone 4 and I have got one more number with an iPhone 5s and an ipad air. I don't know if to set the new devices (5s and ipad) with the same Apple ID or not. Of course I would like to use the same contacts and emails on

  • Hyper-v virtual machine management in status stopping

    Hello, I had a problem with one vm showing status backing up. I read on TechNet that restarting the hyper-v virtual machine management service would solve the problem. I have tried to shutdown the service but it now says status stopping... How long t

  • 2LIS_02_ITM - Set up Table

    All,     Can we run a set up table job (LO datasources) (in case of purchasing program RMCENEUA) parallely in (R/3)production environment by checking the block documnet option with different document date in selection ?     The reason for this is tha

  • ITunes fetching default album art from installed iOS app

    Hello, Whenever I import an MP3 file (by dragging it from Finder) with -no- embeded artwork into iTunes I'd expect this to be added with the default double quaver album artwork. However the default artwork is instead taken from an iPad/iPhone app fro

  • Backup the Complete Guest Domain

    Hi All, What is the best way to backup the complete Guest Domain including the configuration and all, so that it can be migrated to another server. Thanks in advance