Airport Express, Windows XP and Epson R220 photo printer

when i try to print using airport to my epson r220 printer it doesnt work. but the internet and airtunes still work. how can i fix this

Printing from a Windows XP PC to a printer attached to an Airport Extreme Base Station or Airport Express
http://www.ifelix.co.uk/tech/1004.html
Printing from a Windows XP PC to a printer attached to an Airport Extreme Base Station or Airport Express using Bonjour
http://www.ifelix.co.uk/tech/1008.html
Problems with finding Printer Driver on Windows XP when using printer connected to Airport Extreme or Express
http://www.ifelix.co.uk/tech/1012.html
iFelix

Similar Messages

Airport Express Base Station and HP Laserjet 1020 printer connected

Dear all,
I have a Laptop (PC) Sony Vaio PCG-Z1XSP and an Airport Express Base Station which work perfectly together (internet access and I-tunes). I recently bought a printer HP Laserjet 1020 and connected it to the Airport Express USB soket. I managed to make it work and print a couple of times, but as soon as I turn off the printer or the computer or Airport Express, the next time I want to print, it doesn't work anymore.
The Airport Admin Utility recognises the printer (I can see it listed). I have updated the Airport Express software to the Firmware version 6.3 as well as downloaded the latest driver available on HP's website for my printer. I've also substituted the USB cable. Can anybody help me here? Thank you very much and best regards.

Hallo everybody,
Thanks for all the answers. I have contacted HP's chat online and gone through the problem with 3 different technicians. I've tried a lot myself too. The issue was partially solved by restarting the printer spooler, i.e. stop, then start and then restart it.
However after I was so happy that the printer worked, I turn off everything. When I turn on again, it was not working anymore. Then I tried to see by exclusion what the problem is, I had to restart the Hardwar I don't know how many times.
Conclusion:
1. The USB cable must be plugged into the airport express before turning on anything.
2. Turn on the printer first.
3. Turn on the airport express and the computer.
4. If you try to print it doesn't work, even if you reset the airport express through the airport express utility software. The printer is recognized and appears in it though.
5. Disconnect the USB cable from the airport express and connect it to the PC directly.
6. Print a document.
7. Disconnect the cable and reconnect it to the airport express.
8. Now you should be able to print wireless. You may need to reset the airport expresst with the utility softwar, but I managed to print without having to do it.
9. The pörinter works even if you turn off and on again the computer, or you suspend the windows session and restart it, or if you put it in standby and restart it.
10. The printer works even if you turn off the airport express and the computer, or the airport express alone and restart them/it.
11. The printer doens't work anymore if you turn it off and onn again. In such a case you have to plug in/out as discribeb above.
Solution: Leave the printer always on, or make the plug in/out every morning when you start the computer and print one page direclty before being able to print wireless.
Does anybody have a solution to this problem? I mean it prints, but it is annoying to plug in/out every day, no?
HP's technician says that it is not a recommanded solution the HP Laserjet 1020 with the airport express, since the printer works on a host based server basis... I mean it is easy to say that, but one expects to buy a printer that works always and not to have to plug in/out everyday, restart spooler and so on.
Can anybody comment or suggest anything I can do to avoid this? Thank you and I hope this helps others too.

I have an AirPort Express, iPhone 5, and MacBook (late 2010). How do I see the graphical overview of my network?

I have an AirPort Express, iPhone 5, and MacBook (late 2010). How do I see the graphical overview of my network? (I can't seem to find a way to see it).
My computer is acting....well, strange. I can't put my finger on it but it doesn't seem right. Menus look skewed. Some applications look like they're trying to disguise themselves as apple (no consistant window formats). Airplay turns on and off on my devices on it's own. And some locked system preference seem to unlock themselves, or won't even grey-out after I lock them.
I have changed my password many times but the issue keeps coming back. I feel like I'm going crazy - but I know that something just isn't right...maybe someone's been hacking me? (I have no idea why...)
Anyway, maybe I could have stemmed from an improper setup of my wireless network.
Any thoughts?
Also, right now, when I just signed into apple communities....
     I have an iCloud email address that is accociated with my 1 and ONLY Apple ID...
     It seems to have been working but...
     When I loged in here it only saw my:
                              OLD MacBookPro
                              3 Old iPods
                              My new MacMini with OS X Sever (Server is currently turned off)
     Could my Apple ID be confusing my MacBook (which I'm currently using) as an old iPod or my old MacBookPro?
     I doesn't even see my iPad (1st generation), or my iPhone 5
     Also, the Mac App store is giving me the option to download Mountain Lion??? I already have version 10.8.3...
Can anyone perform an analysis on my account and computer? I have been to the Apple Store 6 seperate time and the problem was not resolved (after 6 COMPLETE hard drive wipes).
PLEASE HELP!

i guess you could put the aiport utility app on your iphone, click on the aiport express there, it will show you how many devices are connected to it and the mac addresses of those devices.

Airport Express Audio Drop and Network issue

I have a Dell Laptop, DLink G604T router and Airport Express. When I first bought the airport express I successfully got it to join my existing Dlink wireless network and I could happily stream music wirelessly to the airport express and maintain a wireless internet connection through the Dlink router.
Since then I started having issues with audio drops to the Airport express and despite doing a lot of searching on the discussion forums and internet and trying different things have never solved the issue.
The one thing that does seem to work is if I create a new wireless network with the Airport Express rather than joining the existing Dlink one. I can then stream music flawlessly all day long. The down side is I then can't get internet access wirelessly at the same time. I have to disconnect from one network and connect to the other.
If I connect the dlink router to the airport express by ethernet and use the Dlink router just as a modem I think the issue will be resolved but this is not convenient due to position of router and airport express.
So the question is, Can I get the Dlink router to join the Airport Express Wireless network wirlessly rather than the AE joining the Dlink wireless network? Any thoughts on whether this is possible and if so how?
Dell Inspiron 500m Windows XP Pro

I had one AE base unit, where network connection would disapear every other day. The light would still be green on the AE, but the signal from the AE could not be picked up nor seen by the computer. Only turning the AE off and back on, would make it appear and work again. I Changed the AE unit, and I dont have the problem any more. I didnt change any settings at all.
So in my case, it was the AE base unit that was malfunctioning.
I have also seen similar problems with a different cause: That the wifi network card in the computer wasnt connected properly. ..
I dont think its a software problem
good luck

Airport Express Base Station and AirTunes

I was given an Airport Express Base Station and I purchased
a PCMCIA wireless card (802.11g). After installation of both items I then upgraded the iTunes software to v4.9. I want to transmit music from my laptop to the Airport Express Base Station. I understand I require the AirTunes software butI cannot find a download site for that application. The CD that came with the Base Station does not have Airtunes (obviously an older version of the application software). Is AirTunes available as a download?
Thanks

Airtunes support is built in to iTunes version 4.9 - there is no other software you need to download or install. If your PC has been successfully set up to connect to the Airport Express wireless network, a drop down box will appear in the lower right corner of the iTunes application window where you can select the place your iTunes should be playing (ie internal speakers, or the Airport Express).
You did not mention either (a) configuring your Airport Express or (b) setting up your PC to connect to the Airport Express wireless network. To do this:
(a) read the configuration manual for the Airport Express. Then download the Airport 4.2 update for Windows (from Apple's web site) - it provides the latest Windows versions of the Airport Express configuration software.
(b) to get your PC to connect to the Airport Express wireless network, see the links to "accessing an airport network" provided at:
http://www.efelix.co.uk/tech/windowsxp.html

Hi i got a new airport express for christmas and i set it up as per instructions ,i even give a static ip and wpa2 security ..the problem is is when i come to want to use it it says its not on my network and a orange triangle shows .when i reboot it works

hi i got a new airport express for christmas and i set it up as per instructions ,i even give a static ip and wpa2 security ..the problem is is when i come to want to use it it says its not on my network and a orange triangle shows .when i reboot it works..then if i leave it a while and try iy agian its disapeared of my network...i have a bt hub 3 ....any help please ..im not sure if itsa faulty express

I really don't have an answer for that one. I guess that while trying to get things working correctly, I would use the most basic monitor I had which in your case would be the Eizon using the Thunderbolt port and adaptor.
When you boot into Safe Mode the startup is quite slow, but you should get the Apple logo and then the spinning gear below it (release the SHIFT key when it appears.) Then after a little more time you should see a gray progress bar appear below the spinning gear. When that disappears the computer will startup to a login screen.

I have an Airport Extreme, 2 laptops with windows 7 and a wireless HP printer. I can connect the laptops to the printer. Any advise?

I have an Airport Extreme, 2 laptops with windows 7 and a wireless HP printer. I am not able to connect the laptops to the printer. Any advise?

The problem is not the router.. the issue is the vpn has put your computer in a different IP range with a different gateway. When you turn off the vpn the computer returns to local lan and can print.
Some vpn software allows you to set gateway to use local net instead of remote gateway or access to other webistes or local lan.
Read up the issue.
http://stevejenkins.com/blog/2010/01/using-the-local-default-gateway-with-a-wind ows-vpn-connection/
Cisco vpn client..
https://supportforums.cisco.com/thread/239113
I did not search much.. just grabbed the first article I could find that explains the issue.
The whole point of the vpn is whilst it is connected your computer is NOT part of the Local Lan .. it is part of the Remote LAN via the vpn tunnel.
It is also a security risk using split tunnelling so often it will not be allowed.
Plug the printer directly into the computer via usb or whatever.. Local connection will work.. not local lan.

How to set up and configure AirPort Express for AirPlay and iTunes

Saw somewhere that supposedly there were some apple written guidlines on the above topic. I have searched all over for them. Anyone know where I can get a copy to read through. Just trying to educate myself a bit and sety up another room with access to itunes, radio, etc with high quality speakers and amp off my express.

Here you go ...
How to set up and configure AirPort Express for AirPlay and iTunes

Airplay disrupts transmission with Airport Express 6.2 and OS X 10.8.3 Any fixes known?

Airplay disrupts transmission with Airport Express 6.2 and OS X 10.8.3 Any fixes known?

Looks like this is a known issue which has been fixed for Java 8:
https://javafx-jira.kenai.com/browse/RT-23328 "Mac: Impossible to use -splash:<image> with JavaFX 2.2 and JDK 7"

The green light in my airport express started blinking and doesnt stop and I cannot find it anymore

the green light in my airport express started blinking and doesnt stop and I cannot find it anymore

Unfortunately, green blinking is usually a symptom of an internal electrical problem on the AirPort Express.
Try a Factory Default Reset as a last resort:
Power down the Express
Wait ai few minutes
Hold in the reset button first, and keep holding it in for an additional 9-10 seconds while you simultaneously plug it back in to power
Release the reset button after the hold period and allow a full minute for the Express to restart.
You want to see a slow blinking amber light at this point, indicating that the Express has been reset to factory defaults. You can reconfigure it again now.
If you try the Factory Default Reset a few times and this does not help, I am afraid that the Express is defective and will need to be replaced.

Problem with Airport Express (1st gen) and Mavericks?

Hello,
I still have an older 1st gen Airport Express (model A1264) and now with Mavericks it isn't working at all. The Airport Utility app on my Mac can't even find or connect with it. The same with the iOS app. It worked fine before. I can't even update the firmware (either no download available or other available downloads are too old and won't install). Is there a solution or do I need to update my whole device?
Thanks,
Paul

As a last resort, try a factory default reset on the AirPort Express as follows:
Power off the AirPort Express
Wait a minute
Hold in the reset button first, and keep holding it in for another 8-10 seconds while you simultaneously plug the Express back in to power
Release the reset button after the hold period and allow a full minute for the Express to restart to a slow, blinking amber light status
On an iPhone or iPad home screen....
Tap Settings
Tap WiFi
Look for a heading of Setup a New AirPort Base Station. If it appears.....
Tap on AirPort Express just below the heading to start the configuration process on the Express again
If you try several factory default resets, and the AirPort Express does not appear under the heading of Setup a New AirPort Base Station, the Express most likely is defective and will need to be replaced.

Illustrator cs4 and Epson Stylus R2880 printing problems

I am having printing problems. I am trying to print from my cs4 to my epson stylus photo printer r2880 and am having problem with my picture getting cut off on the left side when I print. The print screen looks perfect but when I go to print, it always cuts off the left edge and the bottom. I tried playing with the x and y's but have no idea what I am doing. Does anyone have this combination of cs4 with the R2880 printer and can help me solve my problem?

Hi Wade,
I have tried playing around with that but I am not sure what I am doing. Here's what it is set at.
On my drop down print screen, i have the size set as US Letter (Sheet Feeder Borderless (retain size).
When I check the 'fit to page' button it actually puts a bigger white boarder around it. The fit to page number says (96.4706%). Shouldn't it say 100%? If I leave it as do not scale I still have a small border around it.
I am not sure about the xy settings. When I have it to 'fit to page' it is:
Top left corner (0,0) Top right corner (0,0)
Bottom left corner (0, .1632) Bottom right corner (0, .1632)
If I have do not scale button clicked:
Top left corner (0,0) Top right corner (0,0)
Bottom left corner (0, -.225) Bottom right corner is (-.3, -.225)
Do these settings look correct? If not, what should my setting say and how can I set it without the setting changing back everytime I open this window.
Thanks for responding,
Celeste

Photoshop Elements 10 and Epson xp-810 Printer

I just purchased an Epson XP-810 printer. I can print from Photoshop Elements 10 just fime. I need to know how to set the printer up so I can import from its scanner.
Can anyone help me with this?

Thanks!
Date: Mon, 25 Nov 2013 20:14:45 -0800
From: [email protected]
To: [email protected]
Subject: Photoshop Elements 10 and Epson xp-810 Printer
    Re: Photoshop Elements 10 and Epson xp-810 Printer
    created by Barbara B. in Photoshop Elements - View the full discussion
In PSE you need to install the TWAIN driver:
http://helpx.adobe.com/photoshop-elements/kb/twain-installed-photoshop -elements-11.html
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5874804#5874804
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5874804#5874804
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5874804#5874804. In the Actions box on the right, click the Stop Email Notifications link.
           Start a new discussion in Photoshop Elements at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

I recently got Windows 10, and now I cannot print to my HP Officejet 6210.

I had Windows 7 and was able to print to my HP Officeje 6210 series printer, but I upgraded to Windows 10 and I cannot print now.

Hi , Thank you for visiting the HP Support Forums! I see you have recently upgraded your Operating system to Windows 10 and now you are not able to print to your HP Officejet 6210. Please go ahead and run the HP Print and Scan Doctor > www.hp.com/go/tools-- It was designed by HP to provide users with the troubleshooting and problem solving features needed to resolve many common problems experienced with HP print and scan products connected to Windows-based computers. What does the PSDR find? Now take a look here: Windows 10 Upgrade Guide for HP Printers Let me know the results, I will watch for your reply.

Airport express with mac and windows

No problems at all with mac and airport express but I have a vaio with window xp sp2 and a pc with vista home premium and even if they connect to the wireless network they cannot receive an ip address. How can I solve this problem? ( As always, we have to waste a lot of time when we work with microsoft operating systems... ;-)) )
Thanks

Thank you for providing me with the exact model of your PowerBook. This model was available with either an optional or built-in AirPort Card. This card is only able to connect to 802.11b wireless networks with a maximum bandwidth of 11 Mbps. This card is also capable of connecting to wireless networks that use the TKIP encryption protocol. This protocol is used in either the WEP or WPA standard. The card is NOT capable of connecting to wireless networks that use the AES/CCMP encryption protocol that is part of the WPA2 standard.
However, some of the earliest versions of the AirPort Card did not work with WPA's TKIP implementation ... so it is possible that you may not be able to connect to an AirPort Express Base Station (AX) configured for "WPA/WPA2 Personal." It may also be problematic to connect to the same AX if it is configured to use one of the 802.11n modes that offer compatibility to 802.11b/g clients. This latter item does not sound like an issue as you are connecting, but wireless security does.
WEP introduces its own set of "problems." Not to mention, that is it completely un-secure. The following Apple Support article may be helpful in getting all of your wireless clients connected when using WEP: Joining an encrypted WEP or WPA Wi-Fi network

Airport Express, Windows XP and Epson R220 photo printer

Similar Messages

Maybe you are looking for