Airport Express with Airtunes help!

I'm new to the wireless world so my question is why would I get the blinking yellow light on my Airport Express with Airtunes even when I'm within 5 feet of my G4 that has a airport card installed (802.11B). I also tried putting it in the living room which is one floor down and got the same thing.
I updated the firmware for the Airport Express with Airtunes but have not updated the airport card in the G4 because I'm unsure at the apple download site which software to download.
System profiler reports the airport card is 9.52 firmware version.
So is this what I update to: http://docs.info.apple.com/article.html?artnum=120097
The music is only cutting out from time to time but I would still like to see a green light on the Airport Express, its odd that it blinks yellow stating that I have a weak connection.
I'm not sure updating the firmware will help the weak signal, I used the airport utility to setup the Airtunes, but maybe there is a different way to configure the network to make it stronger, like I said I'm totally new to this stuff.
Thanks in advance for any help.
Roger
2002 Quicksilver G4
1.47GHz GigaDesigns Single Processor
OS X 10.3.9
1.5 GB SDRAM
ATI Radeon 9800
Pioneer 107 DVD-RW
Logitech MX518 Gaming Mouse
Klipsch ProMedia 2.1 Speakers
G4 Quicksilver 2002 Mac OS X (10.3.9)
G4 Quicksilver 2002 Mac OS X (10.3.9)

The blinking light doesn't indicate a weak wireless signal, it indicates that you do not have an internet connection established.
Are you using the AE for music streaming without an internet connection?
Haven't tried this myself, but it might eliminate the blinking light:
1. Open Airport Admin Utility and double click your AE to open the configuration.
2. Select the Internet tab.
3. Set to configure manually and enter:
IP address: 192.168.1.2
Subnet Mask: 255.255.255.0
Router Address 192.168.1.1
DNS servers 192.168.1.1
If this doesn't work, there probably isn't much you can do except establish a good connection to another router to get the light to turn green. The above numbers shouldn't be terribly important either since you are just trying to get the Airport to think it has an established connection.

Similar Messages

Iphone, Ipod Touch - Send tunes to Airport Express with Airtunes

Does anyone know if they plan to update the iphone firmware with the ability to send your itunes music straight to your airport express with airtunes bass station. It really seems like a no brainer to me that this be added!

No one here knows if Apple has any plans to include this option with a future update, but this would drain the iPhone's battery in a very short period of time.

Apple AirPort Express with Airtunes and Netgear WPN824v2 Router

I'm having some trouble getting the AirPort Express with Airtunes to connect to a Netgear WPN824v2 network.
Details:
- Router: Netgear RangeMax Wireless Router WPN824v2
- Wireless Network Security: WEP
- Computer: MacBook Pro
- OS: OS X 10.4.10
- AirPort card in computer: this works fine - no problems
- AirPort Express with Airtunes: the setup routine goes OK, but then the unit cannot connect to the wireless network; the light blinks amber.
Could the problem relate to the password (Hex versus ASCII) or perhaps WEP versus WPA?
Any / all suggestions welcome. Thanks.

sonicdubster, Welcome to the discussion area!
Are you following the directions in KB 302153, AirPort Express: How to join an existing wireless network in client mode?
Is the AirPort Express (AX) placed in an area where it can receive a good wireless signal from the Netgear?
Does the AX connect if you disable wireless encryption?
WPA (or WPA2) is much more secure and less troublesome than WEP. If all of your equipment supports WPA, I would switch to WPA.

Can I use Airport Express's Airtunes with a non-Apple modem/router?

I am about to set up a network in our second home, so I am trying to do it as economically as possible. I will have a Verizon modem/router. The Verizon rep says the Verizon equipment is all I need for a computer network (no Airport Extreme Base Station needed). But I would also like to play music on Internet radio stations through iTunes on my Cambridge Soundworks system in a room that is different from the one where the Verizon modem/router will be. Can I purchase an Airport Express with Airtunes to plug in near the music system without also getting an Airport Extreme Base Station to which the Airport Express would be linked? If it is possible to go with just the AE, is it foolish to avoid getting the base station if I would also like to have wireless printing on my network? (I believe I would need the Airport Extreme Base Station for printing because it has the USB port.)

The Airport Express will do what you want in addition to printing if your printer is compatible as it does have a USB port. Just configure the Express to "join" the wireless network that the Verizon router is creating.
You will be able to stream AirTunes to the AirPort Express, which in turn will furnish an audio signal to your stereo system.
If you want to be able to stream any audio source from your computer to the AirPort Express...not just iTunes audio sources...you might want to take a look at Airfoil.

AIRPORT EXRESS with airtunes - MAC MINI RECEPTION

HI MAC BOFFS,
I have just managed to configure a an airport express with airtunes, and managed to get it on the network, but music keeps dropping from the remote speakers. When i get sound it is excellent quality but only for a few seconds.
I have noticed that my reception bar on the top rights does fluctuate and at best is half (and has always) but for internet purposes it never bothered me.
The appartment is stud walls and i have put the router on ch 1 if this helps.:(
Is there anything i should do?
thank you.
i sot

1) The Mac Mini doesn't have great wireless reception. Try experimenting with the Mac mini in the same room to make sure that it is indeed the reception causing your headache. If it is, there are some Mac Mini wireless reception hacks on the 'net.
2) Are you in an apartment? It is possible that there are many wireless networks around from your neighbors and if they are unencrypted your Mac / AE may be hopping between different networks.
Tom

Airport express with wired network

Hello,
I am looking to play my itunes library through my receiver in my living room. There is an ethernet connection there. My mainMac is in another room, also connected to the network. Can I just connect the airport express with airtunes to an outlet in the living room with the ethernet wire into it? (and then the receiver connected to the audio out, of course) My mainMac does not have a wireless card.
I would appreciate some help. Thanks.

ok, so I bought the AX because it seems that I should be able to do what I want. I plugged it into my network, but when Airport Admin Utility tries to scan for AX, nothing shows up. Any clues?
Thanks,
Mario

Trying to set up Airport Express with Ethernet Powerline adapters

Hello,
Having some problems trying to set up my Airport Express with Netgear ethernet powerline adapters.
I want to set up as follows:
Wireless Belkin router --- powerline <---> powerline --- airport express --- home stereo system
The problem I have is that I can connect the airport x in client mode & wirelessly play music using airtunes (until the sound breaks up) but itunes does not find the airport x when connected via the powerlines.
I have airport admin utility configured as follows:
Airport tab:
Wireless mode: create a wireless network
Wireless network name: same as my wireless router SSID
Allow this network to be extended: unticked
radio mode: 802.11n (802.11b/g compatible)
Channel: automatic
Wireless Security: WPA/WPA2 personal (as per my router)
Wireless Password: as per my router
Verify Password: as per my router
Internet tab:
Connect using: ethernet
Connection sharing: off (bridge mode)
Music tab:
Enable Air Tunes ticket
no password set
In iTunes, I have home sharing on & share entire library selected with no password set.
Using OS 10.6.5 & Airport Express 7.5.2
I can ping the IP address of the airport express when connected via the powerlines but cannot select the speakers in iTunes (they are greyed out).
Any assistance would be appreciated....
Thanks

Hi,
Thanks for the quick response...
As suggested, I connected up the Airport X to the Belkin and plugged in a pair of headphones. It didn't work, still could not select the Airport X as speakers.
Dug out my old Netgear DG834G and connected that up in place of the Belkin - it worked. Next connected in the Netgear powerlines and it still worked.
So, the problem is the relatively new Belkin F7D4401 router.
Looks like I will have to find an alternative 802.11n...
Thanks for your help.
Regards
Simon

Airport express with xplornet,

Hi from Canada!
Has anyone any experience with connecting a Airport Express with the Xplornet 4G Satalite ISP Service we use here in rural Canada.
Definitly some issues with the DNS.
any help would be appreciated.
Dave

I had to spend some time ( off and on 1 hour) with network settings, but AX with AirTunes works great! The advice in this discussion helpped more than the book or Apple's support site.
Enjoy!
iBook Mac OS X (10.4.3)

Set up airport express to airtunes & internet when ISP connect using PPPoE

Hi,
I got the following problem: I connect to the internet using airport extreme and the ISP use PPPoE protocol. Now I'm trying to set up my airport express to airtunes my music but the admin utility doesn't see it and it doesn't see the airport extreme as well. Internet connection works fine but cannot play music. any idea what I'm doing wrong? It seems that I have to change the settings to DHCP to make sure airport admin can see the two base stations but if I do so, internet doesn't work anymore.
thanks for your help
Stefano

Hi all,
I have again the same problem but cannot find the answer I found a month ago anymore. anyone can help with a tip and point me in the right direction?
thanks
Stefano

Replacing an Airport Express with a Time Capsule but it won't connect to the internet.

Hello, I hope somebody can help.
I am trying to replace an Airport Express with a 2TB Time Capsule but it won't connect to the internet, via an ADSL modem.
I have tried everything I can think of, powering down all devices, re-setting all devices, but nothing seems to solve the problem.
When I first tried to set up the Time Capsule, there was an option to replace the Airport Express using the same settings.
But there were repeated error messages of 'No DNS Servers' and 'PPPoE server couldn't be found'.
I also had messages that the password for PPPoE wasn't correct, but when I plug the Airport Express back in again, everything works fine.
What could the problem be?

99% of issues with authentication are wrong password or wrong username.. eg it can be strange like the user name is missing the domain.. whereas the Airport Express works fine without it.
Ring your ISP and make doubly sure you have exactly the correct username and password.
If it still doesn't work, put the adsl modem back into router mode and try it again directly on the modem.. if it works ok on the modem but fails on the TC that is possible and can be caused by pppoe client using incorrect authentication type, CHAP or PAP which the TC does not allow you to select AFAIK.. some ISP do not give enough time to get the router to switch on auto to the correct authentication method.
In the end run the modem as router and bridge the TC. It will work just as well for most installations in bridge as the modem in bridge.

Airport Express with printer & hard drive with Time Machine

I have a MacBook that I'd like to backup its data. Concerned about the following (in level of concern from highest to lowest): theft, crash, fire.
I currently have an Airport Express with a Brother printer attached to it that my PC and MacBook print to.
I am really in a dilemma as to what to do. I was looking into Carbonite to get an offsite backup location of my data. (I figured offsite would cover all concerns of losing data due to theft, fire, or just a crash) However, Carbonite does not hold onto data you delete (ie, my photos and videos will fill up my hard drive eventually and I'd like to just archive them in one central spot when I am done accessing them on a regular basis-- ie delete them off my MacBook hard drive). That is like $55/year to do Carbonite... but, the only thing that will help me with over a hard drive in my house is a fire (and theft if a burglar were to find where my backup drive was in the house).-- Of course, I'd probably want a different location for my hard drive for that reason -- so, I'd have to buy another airport or just a time machine that has the wifi built in.
I've read lots of issues with the Western Digital trying to download programs onto your computer... I have one for my PC that I backed up photos manually and it did try to install programs when I attached it to my PC... not so much my Mac when I took some photos off it. I looked into getting another portable hard drive at Costco for my Mac, but realized that it would require reformatting to use on my Mac (as it was built for a PC).... something I wasn't sure if I was computer-savvy enough to do or if I did do it, would I end up with issues later on?
Anyhow... in the end, what do you all do to backup your data, especially photos and videos? Do you have smaller hard drives that you back up to and then when full move them to an offsite location? Can you have more than one "hard drive" backing up..... I was thinking it would be nice to have one larger hard drive that would potentially hold all my photos and videos so I can access anytime, but then have smaller drives of the same data that I can take to a safe deposit box and use as my super secure backup (no fire, no theft, no crash).
btw, When doing time machine, does it keep all the metadata with each photo?
Burning CD's is time consuming.... and, I have heard there are different qualities of disks out there... archival v. not... how long do the archival last v. the non-archival... or is that more of an issue for future generations not being able to access our photos?

You need to remember that the Time Capsule is both a wireless router and a hard drive all in one enclosure. If you don't need a wireless router, around $150 of the $300 for a Time Capsule is going to be in the router portion of the device.
The nice thing about the Time Capsule is that it is a network drive. All Macs running Leopard or Snow Leopard will be able to back up automatically to a single device. The first generation of Time Capsules about two years ago had some power supply problems that affected some users. Apple announced a program for these users to replace their Time Capsules.
So, it depends on your requirements. If you are looking for a new, dual band wireless router and want to backup your Macs running Leopard or Snow Leopard automatically using ethernet or wireless, the Time Capsule is a logical choice.
If you don't need a new router, then you'll need to look at a separate hard drive that will be attached directly to the computer using the USB or FireWire port. If you have two Macs, you'll have to get two hard drives if you want to do Time Machine backups correctly.
Most hard drives can be reformatted to work with Mac if you don't mind a few extra steps and Disk Utility (Macintosh HD > Applications > Utilities > Disk Utility) does not look too complicated for you.
Message was edited by: Bob Timmons

Configure airport express with mac book air

I am trying to configure airport express with a Mac Book Air, without success; the program is installed, but then, nothing appears to configure Airpor Express...
Can I get any help? Thank you
António

Hello!
I´m sorry it took so long to reply, but I´m new to these blogs; and I´ve been travelling a lot... Anyway, I was able to configure Airport Express, but I was told I could use it to expand my wireless network inside my house; which I found it´s not possible.
So, I´m returning my Airport Express to the store tomorrow and try to figure out a way to extend my wireless in any other way.
Any sugestion? Big houses are a problem...
Best regards, and once again thank you!
Antonio

Airport Express with D-Link router?

I bought an Airport Express with the specific purpose of connecting an old 1999 iMac to the internet (D-Link wireless router) via the ethernet port. I also thought I could use it to connect other ethernet devices such as my HD-DVD player.
I tried to configure the Express with my PowerBook to discover later in the instructions that the ethernet port is disabled when configuring the unit as wireless bridge/client. It sounds odd, becuase I can't understand the use of it, then. The range extender configuration which enables ethernet, apparently only works with an Airport base station. I admit I'm not very networking-savvy. Did I do something wrong? Am I understanding the instructions correctly?
Any help will be greatly appreciated.

Unfortunately, most non-AirPort routers are not compatible with Apple's implementation of Wireless Distribution System (WDS)...so it very unlikely that your D-Link router can be extended wirelessly with the AirPort Express Base Station (AX).
The few that are known to work are:
o another Airport Express Base Station
o 802.11g Airport Extreme Base Station (AEBS)
o 802.11n AirPort Extreme Base Station (AEBSn)
o Linksys WRT54G or WRT54GS (not v5)
o Belkin F5D7230-4 and F5D7231
o BT Voyager 2091
o Netgear WGR614 v6
o Buffalo WGR-G54

I have just changed my network provided and now i can't find my 1st gen airport express with airport utilities

Hi, can anyone help. I've just updated my network with a new hub and now i cant find my 1st gen Airport express with the curreent Aiport utilities.

From your description, it sounds like the AirPort Express was configured to connect to your "old" router or hub...and, to do that, the Express remembered the specific ID of that device as part of the connection credentials.
The Express is likely still looking for the "old" device for which it still has the settings to connect.
Since you changed to a new hub or router, the Express has no idea how to connect to this new device.
If this is the case......then the solution will be to reset the Express back to factory default settings....and then configure it again to connect to your "new" hub.

I can not connect airport express with my iPad 2

I am going to wifi in my ipad I press airport express and after a while the answer in a window is that:it is not possible the shaping of my airport express with this software. Please could you help me?

You need to install an older version of AirPort Utility on your Mac. Here is a suggestion:
http://www.macworld.com/article/1167965/mountain_lion_and_the_ancient_airport_ba se_station.html
iOS devices will not be able to configure your older AirPort Express.

Airport Express with Airtunes help!

Similar Messages

Maybe you are looking for