Airport express with an ethernet splitter

Hey,
I am thinking about getting an aiport express (802.11n) to connect my gaming consoles wirelessly as they are too far away from my router, and they are only 802.11g. Is it possible for me to get the AX set it up wirelessly to connect to my network on tc, and then run a splitter from the AX's ethernet port so that I could connect both consoles. On a separate note, this would put my AX in perfect position to use airtunes on my stereo setup, so if this would work it would seem like a perfect setup to me.
Thanks

That linksys device seems great if I were just wanting to set up my gaming consoles, but I was also hoping to use the airtunes that comes with it on my stereo setup. I don't understand why it wouldn't work if you were to use the airport express to extend the network through the ethernet, and then just split that ethernet feed to each console. It seems to me that I would really just end up using it as a router with the ethernet being how I got my internet connection to each console. Is there anyone out there that has done this, or something similar at least. Why would it not work if you were just to split the ethernet connection? It seems like that wouldn't affect the AX itself as it is just worried about getting the wireless data from the tc and then piping it through the ethernet connection.

Similar Messages

  • Airport Express with an Ethernet Network

    I use a Ethernet connection at my house to connect to a LAN for internet access. i.e. no modem. Is it possible to use Airport Express with this network to create a wireless network?

    I have a ethernet connection in my house which I use
    to connect to a LAN. I wish to know if I can use this
    with Airport Express to create a wireless network.
    Yes you can.
    I
    have only seen documentation with the airport express
    detailling a modem.
    An Airport Express can be connected to an ethernet network as a wireless access point.
    iFelix

  • Extend wireless airport extreme with airport express with through ethernet cable, extend wireless airport extreme with airport express with through ethernet cable

    i want to extend my wirless range i using airport extreme upstairs and airport express down i have ethernet cable linking the two but airport express seems to go wireless and is extremly slow any help appreciated

    Start with a "hard reset" of your Express - press and hold its reset button continuously, about five seconds, until its LED flashes rapidly. You will need to reconfigure all its settings.
    Connect it to your Extreme with your Ethernet cable. Using AirPort Utility, configure its Internet Connection to "Connect Using" > "Ethernet" as in the following screenshot:
    If it had been previously configured to "join" a wireless network and you connect its Ethernet cable to your wired LAN, you may experience what you are describing.

  • Airport Express with LaCie Ethernet Hard Drive

    I have an existing airport express that currently is serving me just fine for wireless internet access (for mac mini, two pc laptops), print sharing and itunes.
    I recently purchased LaCie's Ethernet hard drive. I am not able to use the usb port for to set the drive up - but was told buying D-Link Wireless G Router would do the trick and work in "tandem" with the AE. Anyone know how to figure this out? No problem using the AE for just print sharing and itunes - but does anyone know if this can be done? I would like to hook up the ethernet drive and possibly a Tivo but am limited w/ the Airport Express. At the same time, I don't want to replace the benefits of having the AE and do not need it to necessarily extend my network either.....

    Well...I did just that - bought a D-Link 4-port router and hooked everything up. I disabled the AE router and have not been able to find the drive at all on any of my wireless connections. However, when I hooked up an ethernet cable from my laptop (pc) directly to the new router - i was able to see drive and access the login dialog box.
    After having to reset the AE - and reestablishing the wireless network and checking all connections - I still had no luck. My wireless internet connection was working just fine so it appears that this setup is close to working - but still no recognition of a ethernet drive. Any ideas? Thanks.

  • Trying to set up Airport Express with Ethernet Powerline adapters

    Hello,
    Having some problems trying to set up my Airport Express with Netgear ethernet powerline adapters.
    I want to set up as follows:
    Wireless Belkin router --- powerline <---> powerline --- airport express --- home stereo system
    The problem I have is that I can connect the airport x in client mode & wirelessly play music using airtunes (until the sound breaks up) but itunes does not find the airport x when connected via the powerlines.
    I have airport admin utility configured as follows:
    Airport tab:
    Wireless mode: create a wireless network
    Wireless network name: same as my wireless router SSID
    Allow this network to be extended: unticked
    radio mode: 802.11n (802.11b/g compatible)
    Channel: automatic
    Wireless Security: WPA/WPA2 personal (as per my router)
    Wireless Password: as per my router
    Verify Password: as per my router
    Internet tab:
    Connect using: ethernet
    Connection sharing: off (bridge mode)
    Music tab:
    Enable Air Tunes ticket
    no password set
    In iTunes, I have home sharing on & share entire library selected with no password set.
    Using OS 10.6.5 & Airport Express 7.5.2
    I can ping the IP address of the airport express when connected via the powerlines but cannot select the speakers in iTunes (they are greyed out).
    Any assistance would be appreciated....
    Thanks

    Hi,
    Thanks for the quick response...
    As suggested, I connected up the Airport X to the Belkin and plugged in a pair of headphones. It didn't work, still could not select the Airport X as speakers.
    Dug out my old Netgear DG834G and connected that up in place of the Belkin - it worked. Next connected in the Netgear powerlines and it still worked.
    So, the problem is the relatively new Belkin F7D4401 router.
    Looks like I will have to find an alternative 802.11n...
    Thanks for your help.
    Regards
    Simon

  • WDS with Airport express and Dual ethernet Airport base

    Can the airport express and dual ethernet airport base create a wds? I can't find the options on the airport base's software.

    coloradoapple, Welcome to the discussion area!
    The Dual Ethernet (snow) AirPort base station (ABS) does not support WDS.
    Only the AirPort Extreme base station (AEBS) and AirPort Express (AX) support WDS.

  • Airport Express with printer & hard drive with Time Machine

    I have a MacBook that I'd like to backup its data. Concerned about the following (in level of concern from highest to lowest): theft, crash, fire.
    I currently have an Airport Express with a Brother printer attached to it that my PC and MacBook print to.
    I am really in a dilemma as to what to do. I was looking into Carbonite to get an offsite backup location of my data. (I figured offsite would cover all concerns of losing data due to theft, fire, or just a crash) However, Carbonite does not hold onto data you delete (ie, my photos and videos will fill up my hard drive eventually and I'd like to just archive them in one central spot when I am done accessing them on a regular basis-- ie delete them off my MacBook hard drive). That is like $55/year to do Carbonite... but, the only thing that will help me with over a hard drive in my house is a fire (and theft if a burglar were to find where my backup drive was in the house).-- Of course, I'd probably want a different location for my hard drive for that reason -- so, I'd have to buy another airport or just a time machine that has the wifi built in.
    I've read lots of issues with the Western Digital trying to download programs onto your computer... I have one for my PC that I backed up photos manually and it did try to install programs when I attached it to my PC... not so much my Mac when I took some photos off it. I looked into getting another portable hard drive at Costco for my Mac, but realized that it would require reformatting to use on my Mac (as it was built for a PC).... something I wasn't sure if I was computer-savvy enough to do or if I did do it, would I end up with issues later on?
    Anyhow... in the end, what do you all do to backup your data, especially photos and videos? Do you have smaller hard drives that you back up to and then when full move them to an offsite location? Can you have more than one "hard drive" backing up..... I was thinking it would be nice to have one larger hard drive that would potentially hold all my photos and videos so I can access anytime, but then have smaller drives of the same data that I can take to a safe deposit box and use as my super secure backup (no fire, no theft, no crash).
    btw, When doing time machine, does it keep all the metadata with each photo?
    Burning CD's is time consuming.... and, I have heard there are different qualities of disks out there... archival v. not... how long do the archival last v. the non-archival... or is that more of an issue for future generations not being able to access our photos?

    You need to remember that the Time Capsule is both a wireless router and a hard drive all in one enclosure. If you don't need a wireless router, around $150 of the $300 for a Time Capsule is going to be in the router portion of the device.
    The nice thing about the Time Capsule is that it is a network drive. All Macs running Leopard or Snow Leopard will be able to back up automatically to a single device. The first generation of Time Capsules about two years ago had some power supply problems that affected some users. Apple announced a program for these users to replace their Time Capsules.
    So, it depends on your requirements. If you are looking for a new, dual band wireless router and want to backup your Macs running Leopard or Snow Leopard automatically using ethernet or wireless, the Time Capsule is a logical choice.
    If you don't need a new router, then you'll need to look at a separate hard drive that will be attached directly to the computer using the USB or FireWire port. If you have two Macs, you'll have to get two hard drives if you want to do Time Machine backups correctly.
    Most hard drives can be reformatted to work with Mac if you don't mind a few extra steps and Disk Utility (Macintosh HD > Applications > Utilities > Disk Utility) does not look too complicated for you.
    Message was edited by: Bob Timmons

  • Airport Express with D-Link router?

    I bought an Airport Express with the specific purpose of connecting an old 1999 iMac to the internet (D-Link wireless router) via the ethernet port. I also thought I could use it to connect other ethernet devices such as my HD-DVD player.
    I tried to configure the Express with my PowerBook to discover later in the instructions that the ethernet port is disabled when configuring the unit as wireless bridge/client. It sounds odd, becuase I can't understand the use of it, then. The range extender configuration which enables ethernet, apparently only works with an Airport base station. I admit I'm not very networking-savvy. Did I do something wrong? Am I understanding the instructions correctly?
    Any help will be greatly appreciated.

    Unfortunately, most non-AirPort routers are not compatible with Apple's implementation of Wireless Distribution System (WDS)...so it very unlikely that your D-Link router can be extended wirelessly with the AirPort Express Base Station (AX).
    The few that are known to work are:
    o another Airport Express Base Station
    o 802.11g Airport Extreme Base Station (AEBS)
    o 802.11n AirPort Extreme Base Station (AEBSn)
    o Linksys WRT54G or WRT54GS (not v5)
    o Belkin F5D7230-4 and F5D7231
    o BT Voyager 2091
    o Netgear WGR614 v6
    o Buffalo WGR-G54

  • Can I use the airport express with a desktop computer that is not wire less- I want to have wifi in the house for an iphone

    Can i use the airport express with a desktop computer not wifi- I want wifi for my iphone

    I can't seem to find any information anywhere.  It seems like it should work since the AX is showing up on his wifi settings on both his iPhone and iPod.  Not to mention the Apple "Genius" told him that it should work.  However, they also told him that it came with an ethernet, USB and the stereo patch cables...

  • Can I add a second Airport Express using an Ethernet cable to extend my network if the first AX is wirelessly connected to an Xtreme?

    Hi, I run a small motel and I am trying to extend the wireless network from the office to the rooms in the next building.
    I have an AirPort Xtreme connected to my router with an ethernet cable and it works fine.  I have then connected an AirPort Express to this in the next bulding wirelessly (as i cant run an ethernet cable outside) which extends the network over all but the last 2 rooms in the next building.  There are bick walls so it sruggles over the distance.  I realise I cant connect another airport express wirelessly to extend the network further but can I connect another Airport Express using and ethernet cable to the exisiting Aiport Express to extend the network that extra distance?

    You can do this, but as you might imagine, that is going to place even more of a load on the weakest link....the wireless "hop"......between your AirPort Extreme and the current AirPort Express.
    So, things will slow down even more. Whether or not that will be acceptable to your guests is open to question. Light browsing and email should be OK. Someone trying to download a large file is going to be waiting longer than they might consider normal.
    Things like this, you simply cannot predict in advance. Might be a good idea to understand the store's return policy if the new Express puts more of load on the network than is expected.

  • Airport Express with Time machine vs. Time Capsule?

    I'm looking at replacing my backup system. I like the idea of Time Capsule with Time Machine, but I'd like to know if Airport Express with an External drive really works as reported with the March '08 firmware update. I can't find a single place where Apple confirms this.
    Also, I look at time capsule and think it's cool, but with $179 (AEBS) + ~$200 (USB 1TB drive) = $379
    and 1TB TC running $499, why would I buy TC? The AEBS system gives me the ability to easily swap the drive if it fails and I could buy a drive with a 3-5 year warranty vs. the 1 year on a Time Capsule?
    Comments?

    I assume that this is a new AirPort Express and you have not tried to configure it previously.
    Locate the AirPort Express in the general area where you would like to have more wireless signal coverage.
    Connect the Ethernet cable to the WAN "O" port on the back of the AirPort Express
    Power up the AirPort Express and let it run a few minutes. The amber light will be blinking slowly at this point.
    Click the AirPort icon at the top of your Mac's screen and wait a few seconds for a listing of New AirPort Base Station to appear. Just below that, click directly on AirPort Express.
    AirPort Setup will open up automatically on your Mac, take a minute to analyze the network, then announce that the AirPort Express will be configured to extend the Time Capsule network.
    Enter a device name that you want to use for the AirPort Express and click Next
    Wait a minute while AirPort Setup configures everything for you. When you see the indication of Setup Complete, click Done.
    You should be all set.

  • Airport express with Snow and wired Mac Mini?

    Hi,
    I am trying to help my parents set up airport express.
    They have a Mac Mini with no wireless card connected by ethernet to a Snow base station. That is fine, and computer sees the base station in Airport Admin. However, when I try to go to Airport Setup Assistant to set up the Airport Express, I get a message saying that the computer doesn't have a wireless card (which I know) and doesn't allow me to continue.
    Is there a known thing where you can't use Airport Express with a Snow base station without a wireless card? Any insight would be greatly appreciated.
    Thanks!

    Nevermind, I guess I answered my own question.

  • AirPort Express with MacMini with no airport...

    Ok right, i am looking to buy the AirPort Express with Air Tunes for use with my Bang & Olufsen sound system.
    Unfortunatly, i bought my Mac Mini with no AirPort card installed. It is connected via Ethernet cable to my Netgear DG834G wireless router & modem. The Router wirelessly connects to my iBook as well and i can share music on my Mac Mini, iBook and other computers connected wirelessly to my router.
    I want to know if i would be able to use the AirPort Express station with Air Tunes with my mac mini. If any one know or any one from apple could help i would be extremly thankful.
    Thanks, Jeff
    MacMini 1.42GHz, iBook G4 1.33GHz (12")   Mac OS X (10.4.3)   for use with Bang & Olufsen sound system

    YES YOU CAN! you DO NOT need to get a wireless card for your mini.
    why people here feel the need to answer questions that they don't know the answer to is beyond me but YOU CAN CONNECT AND CONTROL the AE via a non wireless computer as long as that computer is connected to a network/router that is wireless..... what you want to do is exactly how i have mine set up, except i don't have a laptop.
    first you need to plug the AE directly into the router via an ethernet cable. then on your mini open up AirPort Admin Utility. the AE should be given an IP by your router and shown in the list in the utility. then you need to click on the AE in the list and hit configure. you will need to enter in the 128bit security code that you have set up in your wireless router, enter the name of the network manually in the config and under 'wireless mode' choose "join an existing network". now the AE will work as a wireless extender and not a router (which is what you want since it will be connected to a network that already has a wireless router)
    once you have it set up you can then remove the ethernet cable that is plugged into the AE and the light should remain green and you are good to go. you will be able to stream music from ANY computer on your network (your mini, laptop, etc) via itunes.
    if you have any problems drop me a message.

  • Airport Express with Extreme

    Grettings,
    I have recently purchased an Airport Express with the desire to extend the range of my wireless home network. I have had no problems with the Airport Extreme (other than litmited signal coverage) but I can't seem to setup the Express to save my life. Here's what I've got:
    -I plug the Express into the wall, the status light goes from green to amber to flashing amber.
    -Airport Admin detects the Express but cannot communicate with it.
    -I cannot update the firmware because the updater cannot communicate with the Express.
    In my past expereinces with Mac products setup processes have been so simple that I'm a bit confounded by my inability to get this up and running. Is something wrong? What do I need to do?
    Thank you, in advance, for your assistance!
    Andrew
    powerbook g4   Mac OS X (10.4.8)   imac snow g4

    "Factory default" reset the AX
    - (ref: http://docs.info.apple.com/article.html?artnum=108044)
    Set up a Wireless Distribution System (WDS)
    (Note: To facilitate setting up the base stations, place them in near proximity of each other during the set up phase.)
    Set up the AirPort Extreme Base Station (AEBS) as the WDS Main Base Station, by connecting directly, using an Ethernet cable, to the LAN port of the AEBS, and then use the AirPort Admin Utility, located in /Applications/Utilities, to make the following settings.
    WDS Tab
    - Enable this base station as a WDS: main base station (checked)
    - Enable wireless clients on this base station (optional)
    - Click "+" to add Remote/Relay Base Stations.
    -- Select the Base Station that you want to be the WDS Remote/Relay.
    -- AirPort ID: <verify that this is the correct wireless MAC address for the Base Station you are adding as a Remote/Relay.
    -- Auto configure as a WDS remote base station (checked)
    -- Click "OK."
    - Verify that the Remote/Relay Base Station has been added to the list.
    - Click "Update," and then verify the settings for the Remote/Relay.
    -- Allow wireless clients on this base station (checked)
    -- New network name: <verify that this is the same as the network name for the AEBS>
    -- TCP/IP: Configure using DHCP
    -- Base Station Password: <the Remote/Relay Base Station password>
    -- Confirm: <same as previous step>
    -- Click "OK."

  • Airport express with hard-wired medem router?

    hi there. i've got a hard-wired modem router to my mac and a pc. my mac however has got an airport card in it and i'm thinking of buying a usb wifi dongle thing (?) for the pc and use an airport express station to get wireless internet.
    Can anyone please assure me that this set up would work:
    lounge: iMac with aiport card.
    bedroom upstairs: pc with usb wifi thing
    living room: phone line plugged in modem router, modem router ethernet cabled to airport express plugged in socket on the wall. hi-fi plugged in airport express with stereo jack.
    would i get wireless internet on both machines an my tunes wirellesly available on the hi-fi?
    thanks for your patience!
    also does anyone know whether i need to let my isp know that i'm intending to use wifi or will it work anyway?

    With the AirPort Express Base Station (AX), configured as a "bridge and connected via Ethernet to your wired router, it will act like a Wireless Access Point (WAP). In this configuration, the wired router will continue to provide NAT & DHCP services for both the wired and wireless clients connected to it.
    Your proposed network configuration is sound. The only issue I see may be the wireless range. The AX is advertised at 300' for 802.11b (11 Mbps), but building construction materials or other forms of Wi-Fi Interference may limit this range. The end result is that the wireless clients furthest away from the AX may experience weak or poor wireless performance.

Maybe you are looking for