Airport Express with Belkin G PLUS MIMO ADSL

Hi All,
I have just purchased an Airport Express to improve my upstairs signal utilising WDS via the Belkin router.
I had a few issues setting up but this thread (from '06) helped me:
http://forums.macrumors.com/showthread.php?t=225216
I set up the Belkin router accordingly (set up the wireless bridge, configure the MAC address, etc) and seem to have managed the Airport Express config stages.. I have now got a full signal on my Mac Pro with the Airport Express unit plugged in at the top of the stairs halfway between me and the router. All seems fine, there's a green light, the settings/config as per the thread yielded a "SETUP SUCCESS" result, so why worry?
Well I just expected to see the Airport Express as the wireless network in my OS network bar - it is currently still showing "Belkin MIMO". Is this correct? I guess it makes sense on one hand, seeing as ultimately the Airport Express is communicating to it in order to access the Internet, but I wanted to check for peace of mind after forking out £81...
Is anyone else using this as a signal booster with non-Apple routers with similar results?
Andy

+Well I just expected to see the Airport Express as the wireless network in my OS network bar - it is currently still showing "Belkin MIMO". Is this correct?+
Correct. You are extending the Belkin network so you simply have one larger wireless network.
If you want to confirm that your Mac near the AirPort Express is connecting to the AirPort Express, hold down the option key on your computer while you click on the fan shaped AirPort icon at the top of your screen. Look for the BSSID. That should be the same address as the AirPort ID of your AirPort Express.

Similar Messages

Airport Express with Belkin N1 Wireless Router

I saw Airport Express and am very interested to buy this. However, before I proceed to buy, it would want to see if it can work with my Belkin N1 Wireless Router and how.
Preferred setup is
DSL Modem <-> Airport Express <-> Belkin N1 Wireless <-> Laptop
Can anyone advise
1. Can Airport work with Belkin N1 Wireless Router?
2. How do i setup the above configuration?
If this can work, I'm going to get one immediately!! =D

Welcome to the discussions, Richard!
Preferred setup is
DSL Modem <-> Airport Express <-> Belkin N1 Wireless <-> Laptop
The <-> is normally a display for an ethernet connection. The AirPort Express only has one ethernet port, and it will be used to connect to the DSL modem in your example.
So, it would not be possible to connect the Belkin device the AirPort Express using <-> ethernet.

2nd generation AirPort Express with Belkin HD ethernet

Hi,
I've just tried to configure my new 2nd gen AirPort Express to exend my Time Capsule network via Ethernet over mains. I've folloed the other posts here and set up the TC and AP accordingly, using Belkin HDs to provide and internet-over-mains connection. Everything is fine until the Mac in question has to re acquire the Aplle network that is being extended, at which point it reports Internet unavailble!
My question is simply this - can anyone recommend a mains over Ethernet supplier that works correctly with the 2nd gen. AP? The Belkins are cealrly at fault here. If I connect the TC and AP by cable everything is fine, btw. The Belikins have the latest firmware.
Thanks in advance,
Pete

You already know the answer. The AirPort Express must be the router in charge of DHCP and NAT services for the Guest Network option to appear...and your AirPort is in Bridge Mode.
In theory, if you could configure the Zyzel gateway to act as a simple bridge mode modem, the AirPort could be configured to provide DHCP and NAT for the network and the Guest Network option would appear.
But, check with your ISP before you do this....to see if this type of setup would even be supported.

Need to set up password for airport express with belkin pre-N router

I can't figure out how to set up a WEP password for my wireless network at home. I tried setting it up using the AirPort Admin Utility, but no base station appeared on the menu. I'm using a Belkin Pre-N router. Any recommendations out there?

The AirPort Admin Utility is ONLY for use with Apple's base stations.
You will need to follow the directions in the Belkin's User Guide about using a web browser to change the configuration of the router and enable wireless encryption. If all of your equipment supports WPA, use WPA (with a non-dictionary password) instead of WEP.

Linking airport express with other airport express or belkin base

is it possible to link my airport express with another and thus have wireless coming from both?
if not, can it be done with anything other than an apple base, namely Belkin?
any help would be appreciated. thanks

You can link two Express units in a WDS network, by configuring one to extend the wireless network of the other.
Airport Express units can extend a Belkin wireless network if you are using a Belkin F5D7230-4 or F5D7231.
iFelix

Trying to set up Airport Express with Ethernet Powerline adapters

Hello,
Having some problems trying to set up my Airport Express with Netgear ethernet powerline adapters.
I want to set up as follows:
Wireless Belkin router --- powerline <---> powerline --- airport express --- home stereo system
The problem I have is that I can connect the airport x in client mode & wirelessly play music using airtunes (until the sound breaks up) but itunes does not find the airport x when connected via the powerlines.
I have airport admin utility configured as follows:
Airport tab:
Wireless mode: create a wireless network
Wireless network name: same as my wireless router SSID
Allow this network to be extended: unticked
radio mode: 802.11n (802.11b/g compatible)
Channel: automatic
Wireless Security: WPA/WPA2 personal (as per my router)
Wireless Password: as per my router
Verify Password: as per my router
Internet tab:
Connect using: ethernet
Connection sharing: off (bridge mode)
Music tab:
Enable Air Tunes ticket
no password set
In iTunes, I have home sharing on & share entire library selected with no password set.
Using OS 10.6.5 & Airport Express 7.5.2
I can ping the IP address of the airport express when connected via the powerlines but cannot select the speakers in iTunes (they are greyed out).
Any assistance would be appreciated....
Thanks

Hi,
Thanks for the quick response...
As suggested, I connected up the Airport X to the Belkin and plugged in a pair of headphones. It didn't work, still could not select the Airport X as speakers.
Dug out my old Netgear DG834G and connected that up in place of the Belkin - it worked. Next connected in the Netgear powerlines and it still worked.
So, the problem is the relatively new Belkin F7D4401 router.
Looks like I will have to find an alternative 802.11n...
Thanks for your help.
Regards
Simon

Replacing an Airport Express with a Time Capsule but it won't connect to the internet.

Hello, I hope somebody can help.
I am trying to replace an Airport Express with a 2TB Time Capsule but it won't connect to the internet, via an ADSL modem.
I have tried everything I can think of, powering down all devices, re-setting all devices, but nothing seems to solve the problem.
When I first tried to set up the Time Capsule, there was an option to replace the Airport Express using the same settings.
But there were repeated error messages of 'No DNS Servers' and 'PPPoE server couldn't be found'.
I also had messages that the password for PPPoE wasn't correct, but when I plug the Airport Express back in again, everything works fine.
What could the problem be?

99% of issues with authentication are wrong password or wrong username.. eg it can be strange like the user name is missing the domain.. whereas the Airport Express works fine without it.
Ring your ISP and make doubly sure you have exactly the correct username and password.
If it still doesn't work, put the adsl modem back into router mode and try it again directly on the modem.. if it works ok on the modem but fails on the TC that is possible and can be caused by pppoe client using incorrect authentication type, CHAP or PAP which the TC does not allow you to select AFAIK.. some ISP do not give enough time to get the router to switch on auto to the correct authentication method.
In the end run the modem as router and bridge the TC. It will work just as well for most installations in bridge as the modem in bridge.

Airport Express with D-Link router?

I bought an Airport Express with the specific purpose of connecting an old 1999 iMac to the internet (D-Link wireless router) via the ethernet port. I also thought I could use it to connect other ethernet devices such as my HD-DVD player.
I tried to configure the Express with my PowerBook to discover later in the instructions that the ethernet port is disabled when configuring the unit as wireless bridge/client. It sounds odd, becuase I can't understand the use of it, then. The range extender configuration which enables ethernet, apparently only works with an Airport base station. I admit I'm not very networking-savvy. Did I do something wrong? Am I understanding the instructions correctly?
Any help will be greatly appreciated.

Unfortunately, most non-AirPort routers are not compatible with Apple's implementation of Wireless Distribution System (WDS)...so it very unlikely that your D-Link router can be extended wirelessly with the AirPort Express Base Station (AX).
The few that are known to work are:
o another Airport Express Base Station
o 802.11g Airport Extreme Base Station (AEBS)
o 802.11n AirPort Extreme Base Station (AEBSn)
o Linksys WRT54G or WRT54GS (not v5)
o Belkin F5D7230-4 and F5D7231
o BT Voyager 2091
o Netgear WGR614 v6
o Buffalo WGR-G54

Can I use Airport Express with a USB Hard disk as a NAS solution?

What have people tried for NAS solutions that work really well wirelessly? Can I use my Airport Express with its USB port to attach a hard disk? Or do I need an Airport Extreme base station? Or some other solution?

The price of the Time Capsule includes the NAS backup system plus a hardware router for your network.
Macs do not support USB 3.0 and most likely won't because Apple's weight is behind Thunderbolt which is considerably faster and more versatile than USB.

Using Airport Express with a new (so far unopened) MacBook

I'd like to use my MacBook without extraneous cables around the house and when I go away. I understand I need Airport Express (or is that Extreme to do this), but I would also like to change my ISP before I configure the new Macbook. Any thoughts, suggestions, advice to a total novice in these matters?
iMac Mac OS X (10.4.6)

Your MacBook will work with either an Airport Express or Airport Extreme base station, and if you only have a MacBook than the Express would be a better choice of the two.
Are you going to use cable or ADSL?
Check out the following website.
Reviews of equipment
http://www.adslguide.org.uk/reviews/
Comparisons of ISPs
http://www.adslguide.org.uk/isps/compare.asp
I would suggest going for a wires only deal and purchasing your own equipment.
Do not get a USB modem unless you are going to only use it to keep a door open or similar...
As most ADSL Modem Routers are setup through a web browser you should be fine with a Mac.
Personally I use plusnet and Netgear ADSL Modems. One is a DG834G combined device and the other is a DM602 Modem Router connected to an AEBS.
If you really want an Airport Express, I would also check out ADSL Nation's X-Modem M3 http://www.adslnation.com/products/xmodem-m3.php It is also now available from the UK Apple store and retail stores.
http://store.apple.com/Apple/WebObjects/ukstore?productLearnMore=TJ151
which can also be used in conjunction with an AEBS or AX.
iFelix

Can no longer connect to Airport Express with upgrade to iTunes 10.1

Since I upgraded to iTunes 10.1 I can no longer connect to my Airport Express (unknown error-15000). Another computer on my betwork running an older version of iTunes still works on the Airport Express.
Any ideas? I have tried to uninstall and reinstall airport express with no success.

Rather than disabling the firewall, try making sure you've got exceptions in it for BonJour. Although the following document is about a different error message, the instructions in there are worth trying. (At step 7, make sure there's an exception for BonJour as well.)
[iTunes for Windows: Bonjour alert due to firewall, security, or proxy software|http://support.apple.com/kb/TS3448]

Airport Express with printer & hard drive with Time Machine

I have a MacBook that I'd like to backup its data. Concerned about the following (in level of concern from highest to lowest): theft, crash, fire.
I currently have an Airport Express with a Brother printer attached to it that my PC and MacBook print to.
I am really in a dilemma as to what to do. I was looking into Carbonite to get an offsite backup location of my data. (I figured offsite would cover all concerns of losing data due to theft, fire, or just a crash) However, Carbonite does not hold onto data you delete (ie, my photos and videos will fill up my hard drive eventually and I'd like to just archive them in one central spot when I am done accessing them on a regular basis-- ie delete them off my MacBook hard drive). That is like $55/year to do Carbonite... but, the only thing that will help me with over a hard drive in my house is a fire (and theft if a burglar were to find where my backup drive was in the house).-- Of course, I'd probably want a different location for my hard drive for that reason -- so, I'd have to buy another airport or just a time machine that has the wifi built in.
I've read lots of issues with the Western Digital trying to download programs onto your computer... I have one for my PC that I backed up photos manually and it did try to install programs when I attached it to my PC... not so much my Mac when I took some photos off it. I looked into getting another portable hard drive at Costco for my Mac, but realized that it would require reformatting to use on my Mac (as it was built for a PC).... something I wasn't sure if I was computer-savvy enough to do or if I did do it, would I end up with issues later on?
Anyhow... in the end, what do you all do to backup your data, especially photos and videos? Do you have smaller hard drives that you back up to and then when full move them to an offsite location? Can you have more than one "hard drive" backing up..... I was thinking it would be nice to have one larger hard drive that would potentially hold all my photos and videos so I can access anytime, but then have smaller drives of the same data that I can take to a safe deposit box and use as my super secure backup (no fire, no theft, no crash).
btw, When doing time machine, does it keep all the metadata with each photo?
Burning CD's is time consuming.... and, I have heard there are different qualities of disks out there... archival v. not... how long do the archival last v. the non-archival... or is that more of an issue for future generations not being able to access our photos?

You need to remember that the Time Capsule is both a wireless router and a hard drive all in one enclosure. If you don't need a wireless router, around $150 of the $300 for a Time Capsule is going to be in the router portion of the device.
The nice thing about the Time Capsule is that it is a network drive. All Macs running Leopard or Snow Leopard will be able to back up automatically to a single device. The first generation of Time Capsules about two years ago had some power supply problems that affected some users. Apple announced a program for these users to replace their Time Capsules.
So, it depends on your requirements. If you are looking for a new, dual band wireless router and want to backup your Macs running Leopard or Snow Leopard automatically using ethernet or wireless, the Time Capsule is a logical choice.
If you don't need a new router, then you'll need to look at a separate hard drive that will be attached directly to the computer using the USB or FireWire port. If you have two Macs, you'll have to get two hard drives if you want to do Time Machine backups correctly.
Most hard drives can be reformatted to work with Mac if you don't mind a few extra steps and Disk Utility (Macintosh HD > Applications > Utilities > Disk Utility) does not look too complicated for you.
Message was edited by: Bob Timmons

Configure airport express with mac book air

I am trying to configure airport express with a Mac Book Air, without success; the program is installed, but then, nothing appears to configure Airpor Express...
Can I get any help? Thank you
António

Hello!
I´m sorry it took so long to reply, but I´m new to these blogs; and I´ve been travelling a lot... Anyway, I was able to configure Airport Express, but I was told I could use it to expand my wireless network inside my house; which I found it´s not possible.
So, I´m returning my Airport Express to the store tomorrow and try to figure out a way to extend my wireless in any other way.
Any sugestion? Big houses are a problem...
Best regards, and once again thank you!
Antonio

Can I use Airport Express with iPhone in my hotel room?

Is there a way to set up an Airport Express in my hotel room when I travel, so that the provided High Speed internet cable in the room can be plugged into my Airport Express, giving me a wireless internet connection for the iPhone? I use Airport Express often this way with my MacBook, so I don't have to be tethered to the cable.

I did this about a month ago when I was in England. I just had the Airport Express with me, and had not done any configurations. I plugged it in and had the iPhone find it. It worked in some hotels, and didn't at others. When it worked it was great. I assume with some of the hotels where it didn't work, that I needed to configure it but since I didn't have my laptop I didn't have any way to configure it. Is there any kind of "universal" or "automatic" configuration you can set it up with?

Can't configure airport express with laptop after 10.5.6 update

I can't configure airport express with laptop after 10.5.6 update
the airport express is seen but can't access configuration screen, I get the spinning wheel forever.
Other computer gets to the configuration screen without problem.
And the airport utility describes the airport express like this: syAP.802.11format

I downloaded the airport utility and re-installed
and the problem was solved

Airport Express with Belkin G PLUS MIMO ADSL

Similar Messages

Maybe you are looking for