Airport Express with D-link 624+ wireless router.

Have got a D-link wireless router connected. Wireless internet works fine on its own, but I cannot connect the apple airport express to the wireless internet, so I have to keep switching connections and am unable to use the internet at the same time as streming music to my stereo....what am I doing wrong?
please help me. I thought I knew computer gear, but was SOOOO wrong.

I had a DL 624+ (and have since abandoned it). I had a lot of instability problems with it, which seemed to be related to the Dlink DHCP implementation. I was watching the log on the router, and I was seeing the dlink constantly re-issuing DHCP addresses to the macs on the network - it would renew the addresses twice a minute.
I had seen some posts which suggested that there were problems with either long DHPC client names, or client names which had non-alphanumeric characters in them. (Note if your machine name has spaces, this could happen.)
So, you might want to try:
-Assigning static IP addresses and see if the problem goes away
-checking your DHCP client names to make sure they are between 8-12 characters
Hope this helps!

Similar Messages

Airport Express with D-Link router?

I bought an Airport Express with the specific purpose of connecting an old 1999 iMac to the internet (D-Link wireless router) via the ethernet port. I also thought I could use it to connect other ethernet devices such as my HD-DVD player.
I tried to configure the Express with my PowerBook to discover later in the instructions that the ethernet port is disabled when configuring the unit as wireless bridge/client. It sounds odd, becuase I can't understand the use of it, then. The range extender configuration which enables ethernet, apparently only works with an Airport base station. I admit I'm not very networking-savvy. Did I do something wrong? Am I understanding the instructions correctly?
Any help will be greatly appreciated.

Unfortunately, most non-AirPort routers are not compatible with Apple's implementation of Wireless Distribution System (WDS)...so it very unlikely that your D-Link router can be extended wirelessly with the AirPort Express Base Station (AX).
The few that are known to work are:
o another Airport Express Base Station
o 802.11g Airport Extreme Base Station (AEBS)
o 802.11n AirPort Extreme Base Station (AEBSn)
o Linksys WRT54G or WRT54GS (not v5)
o Belkin F5D7230-4 and F5D7231
o BT Voyager 2091
o Netgear WGR614 v6
o Buffalo WGR-G54

AirPort Express with Air Tunes and wired router

Do any of you using AirPort Express with Air Tunes as a base station have it connected to a wired router, just as an added precaution?
thanks,
--h

As far as I know, AirPort Express w/tunes has a firewall, but a given router may offer more protection options than just a firewall. I'm wondering about security on the wired side of the connection, not the wireless side.
--h

Apple AirPort Express with Airtunes and Netgear WPN824v2 Router

I'm having some trouble getting the AirPort Express with Airtunes to connect to a Netgear WPN824v2 network.
Details:
- Router: Netgear RangeMax Wireless Router WPN824v2
- Wireless Network Security: WEP
- Computer: MacBook Pro
- OS: OS X 10.4.10
- AirPort card in computer: this works fine - no problems
- AirPort Express with Airtunes: the setup routine goes OK, but then the unit cannot connect to the wireless network; the light blinks amber.
Could the problem relate to the password (Hex versus ASCII) or perhaps WEP versus WPA?
Any / all suggestions welcome. Thanks.

sonicdubster, Welcome to the discussion area!
Are you following the directions in KB 302153, AirPort Express: How to join an existing wireless network in client mode?
Is the AirPort Express (AX) placed in an area where it can receive a good wireless signal from the Netgear?
Does the AX connect if you disable wireless encryption?
WPA (or WPA2) is much more secure and less troublesome than WEP. If all of your equipment supports WPA, I would switch to WPA.

Airport Express with Orange LiveBox and Wireless Music

I just purchased an Airport Express with the intention of using it for streaming music wirelessly to play through my AV receiver.
I managed to get this working without any problems.
However I use an orange Livebox (wireless modem) for my Internet connection.
Is it possible to use Airport for both as when I set up the Airpor Express it started its own network thus if I wanted to use it I had to switch from my Internet connection.
My Livebox and AV Receiver are in different rooms if that makes any difference.
Cheers

Configure your AirPort Express (AX) following the directions in KB 302153, AirPort Express: How to join an existing wireless network in client mode.

WDS setup with Airport Express and other(non-Apple) wireless router

Hi,
I am trying to configure a wireless network with one airport express and one Planex Wireless access point. Can anyone please point me to the settings to be made for such a scenario? I can use either of them as the main WDS device, and have a (wired)router provided by the ISP in the network.(so total 3 devices : airport, planex a/p , ISP router)
Thanks.

I'm having the same problem, both with a Linksys WRVS4400Nv2, and a WRT54G. I've not put much effort into the WRT, but the WRVS was such a pain that I don't think I can get it to work at all.
The WRT doesn't have a section on WDS, but I've read that it's supported anyways, and nothing needs to be enabled on it. Is there a good step-by-step available here or elsewhere that uses close to the same router and Airport Express units, on the latest Airport setup software?
Basically, I'm trying to set this up for a guy in an ~8000 sq. foot house so he has wireless throughout it, and he wants itunes streaming from the AX. Has anyone done this?
Message was edited by: manderso

Is it possible to create a hot spot with Apple Airport Express 2nd Generation Dual Band Wireless Router, usefull in a hotel with ethernet wall sucket.

is it possible to create a hot spot with apple Airport express 2 generation and use it i a hotel with ethernet wall socket and use it with my Ipad 2?

HenrikAppleJespersen wrote:
is it possible to create a hot spot with apple Airport express 2 generation and use it i a hotel with ethernet wall socket and use it with my Ipad 2?
Yes, it is one of the things AirPort Express was specifically designed for.

Airport Express with D Link DIR-300 in client mode failure.

I just want my Airport Express to join my current network from a D-Link DIR-300 wireless router in order to use airplay. I use the Airport Utility and appear to successfully set up the device. When it is waiting for the airport to restart, it times out and is unable to locate the AE unless I reset the device and start over. The AE flashes turns green, then begins to flash yellow.
What can I do to make this work. I just want to send music the AE, and be on my existing wifi.

Chances are, the Wireless Security settings on your D-Link router and the settings that you are choosing on the AirPort Express do not match up correctly. The result is that the AirPort Express cannot successfully "join" the D-Link wireless network.
To verify if this may be the issue, temporarily turn off the wireless security on the D-Link router and check to see if the AirPort Express can connect that way. If it can, then you know that you have a security setting issue between your router and the AirPort Express.
What are the available security settings on the D-Link router that you are using? We'll try to provide you with a corresponding match for the AirPort Express if you can post back that info.
Message was edited by: Bob Timmons

1 of 2 Airport Expresses Not Responsive After New Wireless Router Installed

Installed a new Belkin N+ wireless router and now one of my Airport Expresses that I use for Airtunes cannot be "seen" by my computer. Tried resetting with no luck. One of them is a g and the other an n. It is the n that I'm having the issue with.

Welcome to the discussion area!
Temporarily, connect an ethernet cable directly from your Mac to the AirPort Express. This will usually allow AirPort Utility to "see" the Express so that you can reconfigure it to work with the new router. You can disconnect the ethernet cable after you have updated the settings on the AirPort Express.
If this is not successful after a few tries, then the next step would be to reset the Express back to a factory default condition and reconfigure it again. To do this you would:
Power down the Express for a few moments
Hold in the reset button and keep holding it in as you plug the Express back in to power
Release the reset button after 8-10 seconds

Airport express using WPS to Linksys Wireless router?

I have a Linksys Wireless router set up to server wireless signal to macs and PCs in my office. It works great, but one of the far offices can't get enough signal.
I bought an airport express assuming I could use it as a repeater in this office.
I'm having some trouble connecting it (config goes great, then when i try and enable WPS mode - entering the current Linksys ID it just flashes orange after restart).
Any tips? Should this be possible?
.dave

Never found a solution to this.

Cant load the airport express with 802.11n

today i just got my new airport express with draft n. but my router can't load the config anymore after i uploading my setting ( change to N with 5 GB ). i've tried all of methods that the manual included. I think i need to exchange the new one. i just bought it yesterday.
i wanna know that would apple store give me refurbished product to me ????

today i got a replacement of AE with 802.11n. the same problem come up. Cant load the configuration. how on earth can i change the setting of my AE? this is my second times, my serial number is 6F8111XXXXX. Please apple fix it.
***

Airport express with wireless NetGear router

Hello everyone...
I received an Airport Express for Christmas. I was immediately able to set up a wireless network at the home I was visiting by plugging in the ethernet cable and a few simple set up steps. After bringing it home, I was able to set it up with the stereo in my bedroom to run iTunes throughout my apartment.
The problem is that I can't get the Airport Express to work through the wireless network already set up in my apartment. If I do the iTunes thing, I can't connect to the internet while it's playing--so it seems to be creating its own network but not connecting with the current wireless internet available in the room.
I did the full reset (unplugged the airport, pushed and held the reset button while plugging it back in until it flashed green three times). From reading other posts I understand that I do have a wireless router capable of handling the WDS (WGR614 v6) but for some reason I am unable to set it up!
Someone please help so i can stream iTunes and surf the net at the same time!

thanks for the link, however my router does not show up in the airport utility. I am not using an airport base station, I am using a Netgear as stated in the original question.
+> 1. Click the AirPort status menu in the menu bar and choose the wireless network created by the base station you want to set up as the main base station.+
This I was able to do, obviously...
+>Open AirPort Utility. Select the main base station...+
There are no stations listed and I have tried clicking "other" and entering the IP address I believe my router is using, but to no avail.

HT1731 Help installing Airport Express with Netgear N150 wireless router? I hav

Hi,
I just purchased the newer Airport Express (new) and am having issues using it in client mode with my Netgear N150 wireless router. All I want to use it for is streaming itunes from my aluminum macbook to my home stereo system, wirelessly.
I have followed the instructions that came with the device. No luck. I have followed the instructions that describe plugging it into an ethernet cable here:
http://support.apple.com/kb/HT1731
With the apple instructions linked above it would connect fine to my existing wireless network, using airport utility, with 'excellent' connection, but when I tried to switch in itunes to my device from my computer i get the pinning wheel and an 'unknown error' occurs.
I have setup a new wireless account and password on my router as desribed at this page, but do get confused when it tells me to use the hex key and $. Haven't worked that out yet. Any advice would be appreciated if this would help.
http://hints.macworld.com/article.php?story=20041017233832771
At best, after hard resetting the device several times, and following the instructions above at macworld, it now finds the device but only plays one blip second of a song, flashing amber from solid green, sometimes playing a second blip of a song, then pausing the song and switching to a flashing amber. By restarting my computer or opening AirPort utiliy I am able to find it again, but it either only plays one second of a song and drops again or turns green and is not able to be found at all by itunes (the button doesn't show up in the menu).
This is the second airport I have tried in 2 years. I purchased a used one and had nearly the exact same issues with a linksys router. Then it would play an album but reset if a song was paused.I had to hard reset it nearly every time i wanted to stream from itunes to my stereo. I assumed it was broken and sent it back. Figured I 'd give it a new go around with a new unit since i just moved into a new house and am now shocked at how difficult it is to set up. I have never had this many issues with an apple device.
My questions:
1) How can I set this up with my existing router? What am I doing wrong?! Why is it so difficult?
2) If not possible, what routers are compatible? I would gladly get a new router in order to stream music to my stereo from ITunes.
thank you for any assistance. i am pulling my hair out.

Try temporarily disabling the Windows 7 firewall, and then, try accessing the AirPort with the AirPort Utility again.

Airport Express with Belkin N1 Wireless Router

I saw Airport Express and am very interested to buy this. However, before I proceed to buy, it would want to see if it can work with my Belkin N1 Wireless Router and how.
Preferred setup is
DSL Modem <-> Airport Express <-> Belkin N1 Wireless <-> Laptop
Can anyone advise
1. Can Airport work with Belkin N1 Wireless Router?
2. How do i setup the above configuration?
If this can work, I'm going to get one immediately!! =D

Welcome to the discussions, Richard!
Preferred setup is
DSL Modem <-> Airport Express <-> Belkin N1 Wireless <-> Laptop
The <-> is normally a display for an ethernet connection. The AirPort Express only has one ethernet port, and it will be used to connect to the DSL modem in your example.
So, it would not be possible to connect the Belkin device the AirPort Express using <-> ethernet.

Airport express with hard-wired medem router?

hi there. i've got a hard-wired modem router to my mac and a pc. my mac however has got an airport card in it and i'm thinking of buying a usb wifi dongle thing (?) for the pc and use an airport express station to get wireless internet.
Can anyone please assure me that this set up would work:
lounge: iMac with aiport card.
bedroom upstairs: pc with usb wifi thing
living room: phone line plugged in modem router, modem router ethernet cabled to airport express plugged in socket on the wall. hi-fi plugged in airport express with stereo jack.
would i get wireless internet on both machines an my tunes wirellesly available on the hi-fi?
thanks for your patience!
also does anyone know whether i need to let my isp know that i'm intending to use wifi or will it work anyway?

With the AirPort Express Base Station (AX), configured as a "bridge and connected via Ethernet to your wired router, it will act like a Wireless Access Point (WAP). In this configuration, the wired router will continue to provide NAT & DHCP services for both the wired and wireless clients connected to it.
Your proposed network configuration is sound. The only issue I see may be the wireless range. The AX is advertised at 300' for 802.11b (11 Mbps), but building construction materials or other forms of Wi-Fi Interference may limit this range. The end result is that the wireless clients furthest away from the AX may experience weak or poor wireless performance.

Airport Express with D-link 624+ wireless router.

Similar Messages

Maybe you are looking for