Airport Express with D Link DIR-300 in client mode failure.

I just want my Airport Express to join my current network from a D-Link DIR-300 wireless router in order to use airplay. I use the Airport Utility and appear to successfully set up the device. When it is waiting for the airport to restart, it times out and is unable to locate the AE unless I reset the device and start over. The AE flashes turns green, then begins to flash yellow.
What can I do to make this work. I just want to send music the AE, and be on my existing wifi.

Chances are, the Wireless Security settings on your D-Link router and the settings that you are choosing on the AirPort Express do not match up correctly. The result is that the AirPort Express cannot successfully "join" the D-Link wireless network.
To verify if this may be the issue, temporarily turn off the wireless security on the D-Link router and check to see if the AirPort Express can connect that way. If it can, then you know that you have a security setting issue between your router and the AirPort Express.
What are the available security settings on the D-Link router that you are using? We'll try to provide you with a corresponding match for the AirPort Express if you can post back that info.
Message was edited by: Bob Timmons

Similar Messages

Join AirPort Express to D-Link DGL4300 router in client mode not working

I only want to be able to stream iTunes to my AirPort Express via my existing network which is controlled by my D-Link DGL-4300 router.
My AirPort Express works as an iTunes streamer because I tested it running its own network (ignoring the existing D-Link network). I am trying to connect in client mode (I think), but my D-Link router just can't see the AirPort Express which seems to disappear off the radar after it restarts with the new settings.
This is what happens...
1. AirPort Express Hard Reset
2. Connect to Airport Express wireless network (which disconnects me from my D-Link DGL4300 wireless network “K1000578”)
3. Run AirPort Utility and enter “Assist Me” mode.
4. Set AirPort Express name and password then click continue.
5. Select “I have a wireless network and want to add AirPort Express or replace an existing device on my network” then click continue.
6. Select “I want AirPort Express to join my current network”
7. Select the name of my D-Link DGL4300 network “K1000578” from the drop down box, select WPA/WPA2 Personal wireless security type and enter the DGL4300 password, then click continue.
8. Click Update in the summary screen.
What happens then is...
MESSAGE BOX “Apple wireless device restarting. Please wait...”
MESSAGE BOX “Connecting to network ‘K1000578’. Please wait...”
AirPort Utility returns with a message advising that although the device was successfully updated, AirPort utility was unable to find it after restarting. It also suggests that I made need to reselect my network for the AirPort menu and try again.
My computer is now unable to even see the AirPort express device.
When I try to reconnect to my existing DGL4300 network “K1000578”, it says that the settings saved on this computer for the network do not match the requirements of the network. !! ***!!
I can fix the last part above by deleting the connection information for my DGL4300 and searching for it again. BUT HOW ON EARTH DO I CONNECT MY AIRPORT EXPRESS TO MY NETWORK?!!
I am able to connect my PC directly to the AirPort Express (if I set it up as its own network) and successfully stream iTunes, but this means I have to disconnect from my DGL4300 network also which means I won’t get internet on that machine and I can’t use my iPhone Remote App.
This is my second experience with Apples “it just works” philosophy. MobileMe was my first. Guess how I’m feeling!
Any help at all is kindly appreciated.

I forgot to mention, I have turned off the MAC address filters on my router, so that's not the cause.

Airport Express with D-Link router?

I bought an Airport Express with the specific purpose of connecting an old 1999 iMac to the internet (D-Link wireless router) via the ethernet port. I also thought I could use it to connect other ethernet devices such as my HD-DVD player.
I tried to configure the Express with my PowerBook to discover later in the instructions that the ethernet port is disabled when configuring the unit as wireless bridge/client. It sounds odd, becuase I can't understand the use of it, then. The range extender configuration which enables ethernet, apparently only works with an Airport base station. I admit I'm not very networking-savvy. Did I do something wrong? Am I understanding the instructions correctly?
Any help will be greatly appreciated.

Unfortunately, most non-AirPort routers are not compatible with Apple's implementation of Wireless Distribution System (WDS)...so it very unlikely that your D-Link router can be extended wirelessly with the AirPort Express Base Station (AX).
The few that are known to work are:
o another Airport Express Base Station
o 802.11g Airport Extreme Base Station (AEBS)
o 802.11n AirPort Extreme Base Station (AEBSn)
o Linksys WRT54G or WRT54GS (not v5)
o Belkin F5D7230-4 and F5D7231
o BT Voyager 2091
o Netgear WGR614 v6
o Buffalo WGR-G54

Airport Express with D-link 624+ wireless router.

Have got a D-link wireless router connected. Wireless internet works fine on its own, but I cannot connect the apple airport express to the wireless internet, so I have to keep switching connections and am unable to use the internet at the same time as streming music to my stereo....what am I doing wrong?
please help me. I thought I knew computer gear, but was SOOOO wrong.

I had a DL 624+ (and have since abandoned it). I had a lot of instability problems with it, which seemed to be related to the Dlink DHCP implementation. I was watching the log on the router, and I was seeing the dlink constantly re-issuing DHCP addresses to the macs on the network - it would renew the addresses twice a minute.
I had seen some posts which suggested that there were problems with either long DHPC client names, or client names which had non-alphanumeric characters in them. (Note if your machine name has spaces, this could happen.)
So, you might want to try:
-Assigning static IP addresses and see if the problem goes away
-checking your DHCP client names to make sure they are between 8-12 characters
Hope this helps!

Problems with D-Link DIR-300

I have tried resetting this, powering it off and on, updating the firmware and it still does not work right.
At the moment, I can get internet through the ethernet cable via this wireless router. I also get a wireless signal from the router but it is not connected to the internet somehow. The airport indicator in the top right shows that I am connected. But when I open "network pref's" it shows that airport is "On" and "not connected".
I use PPPoE cable internet so this router is obviously logging in with the password to the ISP because i am online with the ethernet cable via this router. But obviously the wireless part is not connected to the ISP.
At this point I am thinking that this brand new router is broken. Any other thoughts? Thanks!

Ok, I got it working. I had to go into "Network Pref's" and click "Advanced". Then go to the "TCP/IP" tab and click "Renew DHCP Lease".

Linking airport express with other airport express or belkin base

is it possible to link my airport express with another and thus have wireless coming from both?
if not, can it be done with anything other than an apple base, namely Belkin?
any help would be appreciated. thanks

You can link two Express units in a WDS network, by configuring one to extend the wireless network of the other.
Airport Express units can extend a Belkin wireless network if you are using a Belkin F5D7230-4 or F5D7231.
iFelix

Airport Express with printer & hard drive with Time Machine

I have a MacBook that I'd like to backup its data. Concerned about the following (in level of concern from highest to lowest): theft, crash, fire.
I currently have an Airport Express with a Brother printer attached to it that my PC and MacBook print to.
I am really in a dilemma as to what to do. I was looking into Carbonite to get an offsite backup location of my data. (I figured offsite would cover all concerns of losing data due to theft, fire, or just a crash) However, Carbonite does not hold onto data you delete (ie, my photos and videos will fill up my hard drive eventually and I'd like to just archive them in one central spot when I am done accessing them on a regular basis-- ie delete them off my MacBook hard drive). That is like $55/year to do Carbonite... but, the only thing that will help me with over a hard drive in my house is a fire (and theft if a burglar were to find where my backup drive was in the house).-- Of course, I'd probably want a different location for my hard drive for that reason -- so, I'd have to buy another airport or just a time machine that has the wifi built in.
I've read lots of issues with the Western Digital trying to download programs onto your computer... I have one for my PC that I backed up photos manually and it did try to install programs when I attached it to my PC... not so much my Mac when I took some photos off it. I looked into getting another portable hard drive at Costco for my Mac, but realized that it would require reformatting to use on my Mac (as it was built for a PC).... something I wasn't sure if I was computer-savvy enough to do or if I did do it, would I end up with issues later on?
Anyhow... in the end, what do you all do to backup your data, especially photos and videos? Do you have smaller hard drives that you back up to and then when full move them to an offsite location? Can you have more than one "hard drive" backing up..... I was thinking it would be nice to have one larger hard drive that would potentially hold all my photos and videos so I can access anytime, but then have smaller drives of the same data that I can take to a safe deposit box and use as my super secure backup (no fire, no theft, no crash).
btw, When doing time machine, does it keep all the metadata with each photo?
Burning CD's is time consuming.... and, I have heard there are different qualities of disks out there... archival v. not... how long do the archival last v. the non-archival... or is that more of an issue for future generations not being able to access our photos?

You need to remember that the Time Capsule is both a wireless router and a hard drive all in one enclosure. If you don't need a wireless router, around $150 of the $300 for a Time Capsule is going to be in the router portion of the device.
The nice thing about the Time Capsule is that it is a network drive. All Macs running Leopard or Snow Leopard will be able to back up automatically to a single device. The first generation of Time Capsules about two years ago had some power supply problems that affected some users. Apple announced a program for these users to replace their Time Capsules.
So, it depends on your requirements. If you are looking for a new, dual band wireless router and want to backup your Macs running Leopard or Snow Leopard automatically using ethernet or wireless, the Time Capsule is a logical choice.
If you don't need a new router, then you'll need to look at a separate hard drive that will be attached directly to the computer using the USB or FireWire port. If you have two Macs, you'll have to get two hard drives if you want to do Time Machine backups correctly.
Most hard drives can be reformatted to work with Mac if you don't mind a few extra steps and Disk Utility (Macintosh HD > Applications > Utilities > Disk Utility) does not look too complicated for you.
Message was edited by: Bob Timmons

Airport express with hard-wired medem router?

hi there. i've got a hard-wired modem router to my mac and a pc. my mac however has got an airport card in it and i'm thinking of buying a usb wifi dongle thing (?) for the pc and use an airport express station to get wireless internet.
Can anyone please assure me that this set up would work:
lounge: iMac with aiport card.
bedroom upstairs: pc with usb wifi thing
living room: phone line plugged in modem router, modem router ethernet cabled to airport express plugged in socket on the wall. hi-fi plugged in airport express with stereo jack.
would i get wireless internet on both machines an my tunes wirellesly available on the hi-fi?
thanks for your patience!
also does anyone know whether i need to let my isp know that i'm intending to use wifi or will it work anyway?

With the AirPort Express Base Station (AX), configured as a "bridge and connected via Ethernet to your wired router, it will act like a Wireless Access Point (WAP). In this configuration, the wired router will continue to provide NAT & DHCP services for both the wired and wireless clients connected to it.
Your proposed network configuration is sound. The only issue I see may be the wireless range. The AX is advertised at 300' for 802.11b (11 Mbps), but building construction materials or other forms of Wi-Fi Interference may limit this range. The end result is that the wireless clients furthest away from the AX may experience weak or poor wireless performance.

Playing music via airport express with bair tunes???

hi all im thinking of buying an airport express with air tunes. what i would like to know is can i link the airport directly to speakers and play music using my iphone and not have to have my computer on??? or do i have to run it through the itunes on my laptop?? ps i do have the remote app on my iphone any help greatly appreciated. thank u

It runs through itunes on your computer. You use the remote app to control through itunes. Itunes needs to be running. Works great, I use it all the time.

Can no longer connect to Airport Express with upgrade to iTunes 10.1

Since I upgraded to iTunes 10.1 I can no longer connect to my Airport Express (unknown error-15000). Another computer on my betwork running an older version of iTunes still works on the Airport Express.
Any ideas? I have tried to uninstall and reinstall airport express with no success.

Rather than disabling the firewall, try making sure you've got exceptions in it for BonJour. Although the following document is about a different error message, the instructions in there are worth trying. (At step 7, make sure there's an exception for BonJour as well.)
[iTunes for Windows: Bonjour alert due to firewall, security, or proxy software|http://support.apple.com/kb/TS3448]

Trying to set up Airport Express with Ethernet Powerline adapters

Hello,
Having some problems trying to set up my Airport Express with Netgear ethernet powerline adapters.
I want to set up as follows:
Wireless Belkin router --- powerline <---> powerline --- airport express --- home stereo system
The problem I have is that I can connect the airport x in client mode & wirelessly play music using airtunes (until the sound breaks up) but itunes does not find the airport x when connected via the powerlines.
I have airport admin utility configured as follows:
Airport tab:
Wireless mode: create a wireless network
Wireless network name: same as my wireless router SSID
Allow this network to be extended: unticked
radio mode: 802.11n (802.11b/g compatible)
Channel: automatic
Wireless Security: WPA/WPA2 personal (as per my router)
Wireless Password: as per my router
Verify Password: as per my router
Internet tab:
Connect using: ethernet
Connection sharing: off (bridge mode)
Music tab:
Enable Air Tunes ticket
no password set
In iTunes, I have home sharing on & share entire library selected with no password set.
Using OS 10.6.5 & Airport Express 7.5.2
I can ping the IP address of the airport express when connected via the powerlines but cannot select the speakers in iTunes (they are greyed out).
Any assistance would be appreciated....
Thanks

Hi,
Thanks for the quick response...
As suggested, I connected up the Airport X to the Belkin and plugged in a pair of headphones. It didn't work, still could not select the Airport X as speakers.
Dug out my old Netgear DG834G and connected that up in place of the Belkin - it worked. Next connected in the Netgear powerlines and it still worked.
So, the problem is the relatively new Belkin F7D4401 router.
Looks like I will have to find an alternative 802.11n...
Thanks for your help.
Regards
Simon

Replacing an Airport Express with a Time Capsule but it won't connect to the internet.

Hello, I hope somebody can help.
I am trying to replace an Airport Express with a 2TB Time Capsule but it won't connect to the internet, via an ADSL modem.
I have tried everything I can think of, powering down all devices, re-setting all devices, but nothing seems to solve the problem.
When I first tried to set up the Time Capsule, there was an option to replace the Airport Express using the same settings.
But there were repeated error messages of 'No DNS Servers' and 'PPPoE server couldn't be found'.
I also had messages that the password for PPPoE wasn't correct, but when I plug the Airport Express back in again, everything works fine.
What could the problem be?

99% of issues with authentication are wrong password or wrong username.. eg it can be strange like the user name is missing the domain.. whereas the Airport Express works fine without it.
Ring your ISP and make doubly sure you have exactly the correct username and password.
If it still doesn't work, put the adsl modem back into router mode and try it again directly on the modem.. if it works ok on the modem but fails on the TC that is possible and can be caused by pppoe client using incorrect authentication type, CHAP or PAP which the TC does not allow you to select AFAIK.. some ISP do not give enough time to get the router to switch on auto to the correct authentication method.
In the end run the modem as router and bridge the TC. It will work just as well for most installations in bridge as the modem in bridge.

Configure airport express with mac book air

I am trying to configure airport express with a Mac Book Air, without success; the program is installed, but then, nothing appears to configure Airpor Express...
Can I get any help? Thank you
António

Hello!
I´m sorry it took so long to reply, but I´m new to these blogs; and I´ve been travelling a lot... Anyway, I was able to configure Airport Express, but I was told I could use it to expand my wireless network inside my house; which I found it´s not possible.
So, I´m returning my Airport Express to the store tomorrow and try to figure out a way to extend my wireless in any other way.
Any sugestion? Big houses are a problem...
Best regards, and once again thank you!
Antonio

Can I use Airport Express with iPhone in my hotel room?

Is there a way to set up an Airport Express in my hotel room when I travel, so that the provided High Speed internet cable in the room can be plugged into my Airport Express, giving me a wireless internet connection for the iPhone? I use Airport Express often this way with my MacBook, so I don't have to be tethered to the cable.

I did this about a month ago when I was in England. I just had the Airport Express with me, and had not done any configurations. I plugged it in and had the iPhone find it. It worked in some hotels, and didn't at others. When it worked it was great. I assume with some of the hotels where it didn't work, that I needed to configure it but since I didn't have my laptop I didn't have any way to configure it. Is there any kind of "universal" or "automatic" configuration you can set it up with?

Can't configure airport express with laptop after 10.5.6 update

I can't configure airport express with laptop after 10.5.6 update
the airport express is seen but can't access configuration screen, I get the spinning wheel forever.
Other computer gets to the configuration screen without problem.
And the airport utility describes the airport express like this: syAP.802.11format

I downloaded the airport utility and re-installed
and the problem was solved

Airport Express with D Link DIR-300 in client mode failure.

Similar Messages

Maybe you are looking for