Airport express with hard-wired medem router?

hi there. i've got a hard-wired modem router to my mac and a pc. my mac however has got an airport card in it and i'm thinking of buying a usb wifi dongle thing (?) for the pc and use an airport express station to get wireless internet.
Can anyone please assure me that this set up would work:
lounge: iMac with aiport card.
bedroom upstairs: pc with usb wifi thing
living room: phone line plugged in modem router, modem router ethernet cabled to airport express plugged in socket on the wall. hi-fi plugged in airport express with stereo jack.
would i get wireless internet on both machines an my tunes wirellesly available on the hi-fi?
thanks for your patience!
also does anyone know whether i need to let my isp know that i'm intending to use wifi or will it work anyway?

With the AirPort Express Base Station (AX), configured as a "bridge and connected via Ethernet to your wired router, it will act like a Wireless Access Point (WAP). In this configuration, the wired router will continue to provide NAT & DHCP services for both the wired and wireless clients connected to it.
Your proposed network configuration is sound. The only issue I see may be the wireless range. The AX is advertised at 300' for 802.11b (11 Mbps), but building construction materials or other forms of Wi-Fi Interference may limit this range. The end result is that the wireless clients furthest away from the AX may experience weak or poor wireless performance.

Similar Messages

Airport Express with Belkin N1 Wireless Router

I saw Airport Express and am very interested to buy this. However, before I proceed to buy, it would want to see if it can work with my Belkin N1 Wireless Router and how.
Preferred setup is
DSL Modem <-> Airport Express <-> Belkin N1 Wireless <-> Laptop
Can anyone advise
1. Can Airport work with Belkin N1 Wireless Router?
2. How do i setup the above configuration?
If this can work, I'm going to get one immediately!! =D

Welcome to the discussions, Richard!
Preferred setup is
DSL Modem <-> Airport Express <-> Belkin N1 Wireless <-> Laptop
The <-> is normally a display for an ethernet connection. The AirPort Express only has one ethernet port, and it will be used to connect to the DSL modem in your example.
So, it would not be possible to connect the Belkin device the AirPort Express using <-> ethernet.

HT4437 can i have more than one apple tv at different locations by ethernet on the same router thinking of dumping the airport express and hard wiring an apple tv if this is possible

can two apple tv's be used on the same network and router they would be in different locations one inside the house and one for an outside system? may dump the airport express and go to ethernet wired direct to each apple tv from same router..

Welcome to the Apple Community da dad.
Yes you can connect multiple Apple TV's by ethernet.
What do you mean by outside.

Using Airport Express with an ATT DSL router

July 10, 2012
Hi All! The following thoughts are for
     1) those of you who use ATT DSL as your internet service-provider, and
     2) who wish to stream iTunes songs from your computer to speakers in other rooms via AIRPORT EXPRESSes, and
     3) are wondering whether you have to purchase a separate Apple Airport Extreme base-station, or can simply use your exisiting ATT router.
Having just spent several days and many hours on the phone before Apple's tech "Dan" was finally able to get my system up and running, I thought some of you might appreciate my sharing the following info while it's still fresh in my mind.
1. You may need to update your ATT router to the latest version, in order for it to properly communicate with your AIRPORT EXPRESS(es) (henceforth shortened to "AEs"). The AEs use 802.11n speed. My original ATT router (a 2Wire 2701HG-B) was no faster than "-h," and this might have been part of the problem as to why my system wouldn't work. I went to my local AT&T store, and got their latest router: as of this writing, a Netgear "Westell" Model B90-755025-15, which can run at both the slower speeds as well as the faster "-n." To find out some of the specs of my router, an Apple tech had me type in the 10 digits of my Gateway IP Address into the address-bar (no need for the "https://www") and "Presto!", up popped several pages of info on my router.
2. When first setting up your AE, it needs to be back in "default mode." If it's right out of the box, you don't need to do anything. But if, like me, you've already made several attempts to get it running, then you need to reset it to its pre-configured state, You do that by taking a bent paper-clip, and inserting one end into the little hole on the ports-side of your AE (near where the mini-plug of a speaker-cable is inserted). While the device is plugged in, gently press the paper-clip into the hole until the light on top blinks amber QUICKLY, the flashes coming in rapid succession. Then remove the paper-clip, and the AE will glow solid amber--meaning it's waiting to be re-programmed.
3. When first setting up your AE, do NOT attach an ETHERNET CABLE from the router. The only cable that needs to be attached is the mini-plug cable running to some sort of portable, powered speaker. For myself, to make things easier, I brought my AE and my new Sony RDP-M5iP speaker/dock into the same room as my Imac & router. That way, I'd know immediately if the AE was working correctly.
4. After you've clicked on your Airport Utility App (hard drive TO Applications TO Utilities folder), you'll soon come to a page that asks you to name your AE (this page calls it a "base station"). Before you do that, you should see a button in the lower left-hand corner that says, "Other Options." Click on it. You'll then be given a choice of "Creating a New Network" or "Choosing an Existing Network." You want this 2nd choice--because you indeed are planning to use your ATT router's exisitng wireless network.
5. Shortly, you'll come to the page asking you to name your AE. Call it, for instance, "Family Room Speaker." As for password, at first I--as well as virtually all of the techs with whom I spoke--thought I should type in the multi-digit ATT router-password (called a "Wireless Network Key"). But finally, "Dan" told me to simply type in, "express1" (or, for my 2nd AE, "express2"). That did the trick!
6. Your AE should now be glowing green on top. Plus, on the 10x6" dark-grey rectangular box displaying the globe (i.e., your main internet connection), the globe should have a now-green glowing circle to its left. And underneath, it should be displaying a rectangle named "Family Room Speaker" (or whatever name you've given your Airport Express).
7. When you now open iTunes, you should see a little blue rectangle (with a triangle in its middle) in the lower right-hand corner of your iTunes box. Click on it, and it should show listed both your computer-speaker as well as your AE speaker(s), plus a heading called "multiple speakers." Click on "multiple," and it will bring up a box displaying all your now-current speakers. Check the small square next to any speakers that are unchecked, and a volume-slider will appear. Bring them all up to a comfortable level. Then click on an iTunes track you'd like to play and, viola!, you should hear music playing both from your computer and from the portable speaker to which your AE is attached.
8. Now close iTunes. Then unplug your Airport Express and--if you have a 2nd AE-- plug them both back into your power-strip. Go thru the set-up steps in your Airport Utility App for this 2nd AE. At the end of it, both AEs should be glowing green on top, and both should be displayed on your computer-screen.
Now re-open iTunes, and start a song playing. (Don't forget to click on the blue rectangle at the R-hand bottom, and activate the new AE speaker.) By inserting your speaker cable alternately into each of the AEs, you should be able to verify that, yes, both are now working.
9. Unplug both AEs, and bring them to whatever room you want to use them in. Plug them in to a wall outlet, and run your mini-cable from the AE to the speaker. Give the AEs a few minutes to pick up the signal once again from your ATT router; when they do, their lights will change from amber back to green. Tech Dan warned me to keep them away from too much metal, to avoid interference. As soon as they turn green, you should now be hearing your iTunes track playing thruout your house! (If not, you may have to first close iTunes on your computer, then re-open it, and start a new track playing.)
The BOTTOM LINE: no, you don't have to purchase a separate Apple Extreme to be your base-station. Your ATT router--if it's running at the 802.11n standard--should be able to work with your Airport Express(es)!
My thanks to Sean and Cameron and Chris and, most especially, Dan, the Apple techs who patiently worked with me to get this system online.

I am GREATLY appreciative of this overview. Even though I don't understand a lot of it. I will keep working through. I am-- have for 2 years-- had terrible connectivity with AT&T's service & 2Wire router. My MacBookPro keeps dropping the signal. I'm talking every few clicks at times. Husband's PC drops it, too, but not nearly as much as the Mac. I'm sure what you posted can help us get better connectivity.

HT1731 Help installing Airport Express with Netgear N150 wireless router? I hav

Hi,
I just purchased the newer Airport Express (new) and am having issues using it in client mode with my Netgear N150 wireless router. All I want to use it for is streaming itunes from my aluminum macbook to my home stereo system, wirelessly.
I have followed the instructions that came with the device. No luck. I have followed the instructions that describe plugging it into an ethernet cable here:
http://support.apple.com/kb/HT1731
With the apple instructions linked above it would connect fine to my existing wireless network, using airport utility, with 'excellent' connection, but when I tried to switch in itunes to my device from my computer i get the pinning wheel and an 'unknown error' occurs.
I have setup a new wireless account and password on my router as desribed at this page, but do get confused when it tells me to use the hex key and $. Haven't worked that out yet. Any advice would be appreciated if this would help.
http://hints.macworld.com/article.php?story=20041017233832771
At best, after hard resetting the device several times, and following the instructions above at macworld, it now finds the device but only plays one blip second of a song, flashing amber from solid green, sometimes playing a second blip of a song, then pausing the song and switching to a flashing amber. By restarting my computer or opening AirPort utiliy I am able to find it again, but it either only plays one second of a song and drops again or turns green and is not able to be found at all by itunes (the button doesn't show up in the menu).
This is the second airport I have tried in 2 years. I purchased a used one and had nearly the exact same issues with a linksys router. Then it would play an album but reset if a song was paused.I had to hard reset it nearly every time i wanted to stream from itunes to my stereo. I assumed it was broken and sent it back. Figured I 'd give it a new go around with a new unit since i just moved into a new house and am now shocked at how difficult it is to set up. I have never had this many issues with an apple device.
My questions:
1) How can I set this up with my existing router? What am I doing wrong?! Why is it so difficult?
2) If not possible, what routers are compatible? I would gladly get a new router in order to stream music to my stereo from ITunes.
thank you for any assistance. i am pulling my hair out.

Try temporarily disabling the Windows 7 firewall, and then, try accessing the AirPort with the AirPort Utility again.

Need to set up password for airport express with belkin pre-N router

I can't figure out how to set up a WEP password for my wireless network at home. I tried setting it up using the AirPort Admin Utility, but no base station appeared on the menu. I'm using a Belkin Pre-N router. Any recommendations out there?

The AirPort Admin Utility is ONLY for use with Apple's base stations.
You will need to follow the directions in the Belkin's User Guide about using a web browser to change the configuration of the router and enable wireless encryption. If all of your equipment supports WPA, use WPA (with a non-dictionary password) instead of WEP.

AirPort Express with Air Tunes and wired router

Do any of you using AirPort Express with Air Tunes as a base station have it connected to a wired router, just as an added precaution?
thanks,
--h

As far as I know, AirPort Express w/tunes has a firewall, but a given router may offer more protection options than just a firewall. I'm wondering about security on the wired side of the connection, not the wireless side.
--h

Airport Express with printer & hard drive with Time Machine

I have a MacBook that I'd like to backup its data. Concerned about the following (in level of concern from highest to lowest): theft, crash, fire.
I currently have an Airport Express with a Brother printer attached to it that my PC and MacBook print to.
I am really in a dilemma as to what to do. I was looking into Carbonite to get an offsite backup location of my data. (I figured offsite would cover all concerns of losing data due to theft, fire, or just a crash) However, Carbonite does not hold onto data you delete (ie, my photos and videos will fill up my hard drive eventually and I'd like to just archive them in one central spot when I am done accessing them on a regular basis-- ie delete them off my MacBook hard drive). That is like $55/year to do Carbonite... but, the only thing that will help me with over a hard drive in my house is a fire (and theft if a burglar were to find where my backup drive was in the house).-- Of course, I'd probably want a different location for my hard drive for that reason -- so, I'd have to buy another airport or just a time machine that has the wifi built in.
I've read lots of issues with the Western Digital trying to download programs onto your computer... I have one for my PC that I backed up photos manually and it did try to install programs when I attached it to my PC... not so much my Mac when I took some photos off it. I looked into getting another portable hard drive at Costco for my Mac, but realized that it would require reformatting to use on my Mac (as it was built for a PC).... something I wasn't sure if I was computer-savvy enough to do or if I did do it, would I end up with issues later on?
Anyhow... in the end, what do you all do to backup your data, especially photos and videos? Do you have smaller hard drives that you back up to and then when full move them to an offsite location? Can you have more than one "hard drive" backing up..... I was thinking it would be nice to have one larger hard drive that would potentially hold all my photos and videos so I can access anytime, but then have smaller drives of the same data that I can take to a safe deposit box and use as my super secure backup (no fire, no theft, no crash).
btw, When doing time machine, does it keep all the metadata with each photo?
Burning CD's is time consuming.... and, I have heard there are different qualities of disks out there... archival v. not... how long do the archival last v. the non-archival... or is that more of an issue for future generations not being able to access our photos?

You need to remember that the Time Capsule is both a wireless router and a hard drive all in one enclosure. If you don't need a wireless router, around $150 of the $300 for a Time Capsule is going to be in the router portion of the device.
The nice thing about the Time Capsule is that it is a network drive. All Macs running Leopard or Snow Leopard will be able to back up automatically to a single device. The first generation of Time Capsules about two years ago had some power supply problems that affected some users. Apple announced a program for these users to replace their Time Capsules.
So, it depends on your requirements. If you are looking for a new, dual band wireless router and want to backup your Macs running Leopard or Snow Leopard automatically using ethernet or wireless, the Time Capsule is a logical choice.
If you don't need a new router, then you'll need to look at a separate hard drive that will be attached directly to the computer using the USB or FireWire port. If you have two Macs, you'll have to get two hard drives if you want to do Time Machine backups correctly.
Most hard drives can be reformatted to work with Mac if you don't mind a few extra steps and Disk Utility (Macintosh HD > Applications > Utilities > Disk Utility) does not look too complicated for you.
Message was edited by: Bob Timmons

Can I use Airport Express with a USB Hard disk as a NAS solution?

What have people tried for NAS solutions that work really well wirelessly? Can I use my Airport Express with its USB port to attach a hard disk? Or do I need an Airport Extreme base station? Or some other solution?

The price of the Time Capsule includes the NAS backup system plus a hardware router for your network.
Macs do not support USB 3.0 and most likely won't because Apple's weight is behind Thunderbolt which is considerably faster and more versatile than USB.

Airport Express with D-Link router?

I bought an Airport Express with the specific purpose of connecting an old 1999 iMac to the internet (D-Link wireless router) via the ethernet port. I also thought I could use it to connect other ethernet devices such as my HD-DVD player.
I tried to configure the Express with my PowerBook to discover later in the instructions that the ethernet port is disabled when configuring the unit as wireless bridge/client. It sounds odd, becuase I can't understand the use of it, then. The range extender configuration which enables ethernet, apparently only works with an Airport base station. I admit I'm not very networking-savvy. Did I do something wrong? Am I understanding the instructions correctly?
Any help will be greatly appreciated.

Unfortunately, most non-AirPort routers are not compatible with Apple's implementation of Wireless Distribution System (WDS)...so it very unlikely that your D-Link router can be extended wirelessly with the AirPort Express Base Station (AX).
The few that are known to work are:
o another Airport Express Base Station
o 802.11g Airport Extreme Base Station (AEBS)
o 802.11n AirPort Extreme Base Station (AEBSn)
o Linksys WRT54G or WRT54GS (not v5)
o Belkin F5D7230-4 and F5D7231
o BT Voyager 2091
o Netgear WGR614 v6
o Buffalo WGR-G54

Airport express with old Netgear router together?

I just bought an Airport express because my older Netgear router may be causing issues with streaming movies on my Apple TV. (For some reason the movies cut off). Would it be better to throw out the old router and start anew with the Airport Express or use them both in conjunction?

If there is actually something amiss with your current Netgear router, then replacing it with the AirPort Express or any other wireless router would be in order. Otherwise, you would have to decide what you actual networking requirements are that you believe the AirPort Express Base Station (AX) would fulfill that the Netgear is not doing for you.
The Apple TV, especially the latest version, can work completely without the AirPort Express, and actually duplicates its AirPort Speaker feature.

Apple AirPort Express with Airtunes and Netgear WPN824v2 Router

I'm having some trouble getting the AirPort Express with Airtunes to connect to a Netgear WPN824v2 network.
Details:
- Router: Netgear RangeMax Wireless Router WPN824v2
- Wireless Network Security: WEP
- Computer: MacBook Pro
- OS: OS X 10.4.10
- AirPort card in computer: this works fine - no problems
- AirPort Express with Airtunes: the setup routine goes OK, but then the unit cannot connect to the wireless network; the light blinks amber.
Could the problem relate to the password (Hex versus ASCII) or perhaps WEP versus WPA?
Any / all suggestions welcome. Thanks.

sonicdubster, Welcome to the discussion area!
Are you following the directions in KB 302153, AirPort Express: How to join an existing wireless network in client mode?
Is the AirPort Express (AX) placed in an area where it can receive a good wireless signal from the Netgear?
Does the AX connect if you disable wireless encryption?
WPA (or WPA2) is much more secure and less troublesome than WEP. If all of your equipment supports WPA, I would switch to WPA.

Airport express with Snow and wired Mac Mini?

Hi,
I am trying to help my parents set up airport express.
They have a Mac Mini with no wireless card connected by ethernet to a Snow base station. That is fine, and computer sees the base station in Airport Admin. However, when I try to go to Airport Setup Assistant to set up the Airport Express, I get a message saying that the computer doesn't have a wireless card (which I know) and doesn't allow me to continue.
Is there a known thing where you can't use Airport Express with a Snow base station without a wireless card? Any insight would be greatly appreciated.
Thanks!

Nevermind, I guess I answered my own question.

Airport express with wired network

Hello,
I am looking to play my itunes library through my receiver in my living room. There is an ethernet connection there. My mainMac is in another room, also connected to the network. Can I just connect the airport express with airtunes to an outlet in the living room with the ethernet wire into it? (and then the receiver connected to the audio out, of course) My mainMac does not have a wireless card.
I would appreciate some help. Thanks.

ok, so I bought the AX because it seems that I should be able to do what I want. I plugged it into my network, but when Airport Admin Utility tries to scan for AX, nothing shows up. Any clues?
Thanks,
Mario

How do I setup Airport Express to extend my CISCO router's wifi range?

Hi,
I am using CISCO EA4500 router for internet connection via wifi. I have Airport Express with me, which I want to use as extender of the wifi network. I setup the Airport Express as "Extend the wireless network", provided same base station name (CISCO), network name (JKS) and passwords.
However, I am not able to get it to work. Its gives me error saying network: unknown.
I have just 1 BHK flat, and even then the range is not enough to reach from my DR to BR. I tried using Airport Express as the base station as well. But the problem is again the range.
Help me please.
Jayesh

Can I do it other way around? I mean setup Airport as Base station and use Cisco to extend the wireless network?
I doubt that the Cisco router would be able to to wirelessly extend the AirPort network, since Apple uses proprietary settings that are designed to work with other Apple routers.
Also, when I am trying to use just Airport, I am not able to connect multiple devices at the same time
Sorry, but I don't know whether you have the AirPort connected to the Cisco router using an Ethernet cable....or.....whether you are saying that you have the AirPort connected directly to your modem using an Ethernet cable.
If the AirPort is connected directly to your modem.....what is the make and model number of this device?
Since you know that the Cisco router is working OK when you have it connected to your modem, things would be much simpler if you connect the AirPort to the Cisco router using an Ethernet cable. Can you do this?

Airport express with hard-wired medem router?

Similar Messages

Maybe you are looking for