Airport Express with wireless Powerbook, wired PC, and multi printer

I have a Linksys wireless hub which is plugged into my old pc (running xp home)and wirelessly connected to my powerbook (1.67 G4). I also have an Airport Express which I have not yet used. I would like to use both my PC and laptop with this printer, using this same configuration, and I am wondering if I can use my Airport Express to do this.
Any help is greatly appreciated.
Powerbook G4 1.67 Mac OS X (10.4.9) Old PC- XP upgrade (slow)

01-74, Welcome to the discussion area!
Since the AirPort Express (AX) only has a single Ethernet port, it can not connect to the Internet AND support wired clients. Therefore the AX would not be able to replace your Linksys.

Similar Messages

Can't find Airport Express via wireless or wired connection.

I've run across this topic in this forum and a lot of others and nothing I've found has helped resolve the issue. It seems like the one definitive answer I found was to return it to the store, but I'm hoping to avoid that so I figured I'd try once more.
Running Windows XP and using a linksys Wireless-G network card. When I first got the Airport Express I was able to connect to it but then I had some issues with my cable network connection and had to reset everything. Since then I haven't been able to connect to it, and currently I can't find it using the Base Station. Tried resetting it to factory defaults about 10x and I'm still stuck on blinking yellow. I tried connecting it directly with a network cable and even then my computer can't seem to find it.
I tried turning off my firewall, reinstalling the Airport Utility, connecting to the IP address 10.0.1.1 using the "Configure Other..." box and no luck.
Any suggestions?
Thanks much.

The issue is within the network configuration of the Airport Express. As you mentioned, all hardwired devices can use AirPlay but all wireless devices can't.
Normally, the Airport Express will wirelessly join your existing network, and Airplay will work with all devices. Any reason why you have your Airport Express connected to your router via ethernet?

Losing wireless connection with my airport express with my powerbook G4

Lately I've been losing my wireless signal from my powerbook G4 to my airport express. The light on my airport express still shows as green, so I was wondering if the trouble lied in wither the airport express or my mac? I'm running on the 6.2 version that mac had offered as an update for the express.
The signal returns if I shut down my mac, and then turn it back on, as well as unplugging the airport express and replugging it in as well. This is starting to occur now once a day at least.
I keep my powerbook in the same room as the airport express, and it is usually in fact sitting on my desk above it...so range isn't really an issue.
This is getting tedious, and would like to know how to nip this in the bud.
Please be detailed in your responses. I'm not to tech savey. Thanks.

Lately I've been losing my wireless signal from my
powerbook G4 to my airport express. The light on my
airport express still shows as green, so I was
wondering if the trouble lied in wither the airport
express or my mac? I'm running on the 6.2 version
that mac had offered as an update for the express.
The signal returns if I shut down my mac, and then
turn it back on, as well as unplugging the airport
express and replugging it in as well. This is
starting to occur now once a day at least.
I am also experiencing the same problem, also only since recently updating my AE firmware. I will provide a bit more information so that maybe someone will be able to offer some suggestions.
I have one AE connected to a BT Broadband modem. My iMac is down the hall, connected to the AE for internet and for Airtunes. What I experience is that I will lose connectivity to the airport itself. In fact, sometimes I can actually watch as my airport signal indicator in my menu bar jumps up and down repeatedly (although sometimes the airport signal just disappears altogether and then when I go looking for it in my Airport menubar, my network is no longer listed). The green light on my AE always stays constant when this happens (even when the airport signal goes away completely). The BT modem seems to be fine.
AE basestation firmware is V6.3.
I am connected to my AE using WPA Personal (anyone know what the Group Key Timeout option does? Mine is set at 60 minutes by default... no idea if that is connected to my issue, but I didn't want to play with it since I don't know what it does).
Channel: Automatic, Closed Network. Access Control is enabled so that only my iMac can access the network. Airtunes is enabled.
Under wireless options, multicast rate is 1, interference robustness is not enabled, and transmitter power is 100%.
Anyone have any ideas about what the problem is and what I can do to try and fix it?
Thanks.
G4 iMac 800 MHz Mac OS X (10.4.4) 1 GB RAM

Airport Express with wireless internet 101

I want to be able to use my G4 powerbook without plugging it in through an ethernet cable for my internet connection. I have wireless internet, but I connect with it via ethernet through a router (Linkskys NR041), which is essentially a cable/DSL router. This seems something of a paradox to me. My computer picks up that there is a wireless signal, but I don't seem to have a way of accessing that without ethernet. Is Airport Express going to make this internet setup truly wireless for me, or do I need an Airport Extreme Base station as well? I don't really understand how the two of these are different, even after reading some of the reviews. I get lost as soon as it goes into technical language, so a simple explanation would be appreciated. Thanks anyone who has the time to help.

It sounds like your experience is what I am looking for, but I seem to be missing something with my setup. I have used wifi on my travels, so I'm familiar with doing the Airport setup, but this doesn't seem to work when I'm at home.
In Network, I have Location set to Automatic, but then when I click Assist Me and go to Diagnostics, it says it appears to be working normally. I click Yes anyway, and continue to select locationl, which is Automatic, then it asks me to Choose Network Port Configuration. If I choose Airport, the next window shows Airport with a green light, but shows that Airport Settings and Network Settings have failed. The right hand box asks me to select an Airport Network. None show up, so I click Closed Network down below. The next window then requires me to give a Network Name, and choose an option for Wireless Security, and give a password. I have no idea what WEP or WPA means, but anyway, no matter what I choose, the next page always tells me I am unable to join the Airport Network. Is there some information I am supposed to have that I don't? When I originally set up my computer with my ethernet connection, I just plugged into my router and the computer read all the information it needed and configured itself.

Airport express with wireless NetGear router

Hello everyone...
I received an Airport Express for Christmas. I was immediately able to set up a wireless network at the home I was visiting by plugging in the ethernet cable and a few simple set up steps. After bringing it home, I was able to set it up with the stereo in my bedroom to run iTunes throughout my apartment.
The problem is that I can't get the Airport Express to work through the wireless network already set up in my apartment. If I do the iTunes thing, I can't connect to the internet while it's playing--so it seems to be creating its own network but not connecting with the current wireless internet available in the room.
I did the full reset (unplugged the airport, pushed and held the reset button while plugging it back in until it flashed green three times). From reading other posts I understand that I do have a wireless router capable of handling the WDS (WGR614 v6) but for some reason I am unable to set it up!
Someone please help so i can stream iTunes and surf the net at the same time!

thanks for the link, however my router does not show up in the airport utility. I am not using an airport base station, I am using a Netgear as stated in the original question.
+> 1. Click the AirPort status menu in the menu bar and choose the wireless network created by the base station you want to set up as the main base station.+
This I was able to do, obviously...
+>Open AirPort Utility. Select the main base station...+
There are no stations listed and I have tried clicking "other" and entering the IP address I believe my router is using, but to no avail.

Using Airport Express with ONLY a wired desktop.

Is there a way that i may be able to wire straight out ouf a cable modem directly into a 4 port hub and then from there to a desktop and also to the apple airport express? I guess what I'm asking is can I play itunes with an airport express even though i'm not really using it as a wireless router as I'm hardwiring thes desktop and only trying to tuse the airport to play itunes?
Please help...
Thanks,
Scrump

If you aren't using the AX and desktop at the same time, don't use the hub at all. Connect the device that you are using directly to the cable modem.
Whether you use the hub or connect the device you want to use directly to the cable modem, you will most likely need to reset the cable modem any time that you change from one device to another. Most cable modems will only talk to a single device after they boot. Whenever you change the Ethernet connection to another device the cable modem must be reset. Using a router would eliminate this problem since the cable modem would only see the router.

I am going to travel and want to take my airport express with me so I have a wireless connection. Can I do that?

I need to know if I can disconnect my Airport express and take it to a rental condo for the weekend, without a big problem. They offer internet, but not wireless .

the condo we're renting has a wired modem
Unfortunately, another complication.
We had assumed in your first post that the condo furnished an Ethernet port on the wall, and you would be connecting the AirPort Express directly to that Ethernet port with an Ethernet cable.....the same type of connection that you see in many hotels.
If the condo provides a wired modem......the chances are high that you will need to reset the AirPort Express back to factory default settings and start over again from scratch to try to get the Express working.
Some folks are comfortable with things like that, and some would never consider something like that.
Any way that you get the make and model number of the modem? That might provide a few clues.

Airport express with Snow and wired Mac Mini?

Hi,
I am trying to help my parents set up airport express.
They have a Mac Mini with no wireless card connected by ethernet to a Snow base station. That is fine, and computer sees the base station in Airport Admin. However, when I try to go to Airport Setup Assistant to set up the Airport Express, I get a message saying that the computer doesn't have a wireless card (which I know) and doesn't allow me to continue.
Is there a known thing where you can't use Airport Express with a Snow base station without a wireless card? Any insight would be greatly appreciated.
Thanks!

Nevermind, I guess I answered my own question.

Airport Express with Orange LiveBox and Wireless Music

I just purchased an Airport Express with the intention of using it for streaming music wirelessly to play through my AV receiver.
I managed to get this working without any problems.
However I use an orange Livebox (wireless modem) for my Internet connection.
Is it possible to use Airport for both as when I set up the Airpor Express it started its own network thus if I wanted to use it I had to switch from my Internet connection.
My Livebox and AV Receiver are in different rooms if that makes any difference.
Cheers

Configure your AirPort Express (AX) following the directions in KB 302153, AirPort Express: How to join an existing wireless network in client mode.

AirPort Express with Air Tunes and wired router

Do any of you using AirPort Express with Air Tunes as a base station have it connected to a wired router, just as an added precaution?
thanks,
--h

As far as I know, AirPort Express w/tunes has a firewall, but a given router may offer more protection options than just a firewall. I'm wondering about security on the wired side of the connection, not the wireless side.
--h

Airport express with hard-wired medem router?

hi there. i've got a hard-wired modem router to my mac and a pc. my mac however has got an airport card in it and i'm thinking of buying a usb wifi dongle thing (?) for the pc and use an airport express station to get wireless internet.
Can anyone please assure me that this set up would work:
lounge: iMac with aiport card.
bedroom upstairs: pc with usb wifi thing
living room: phone line plugged in modem router, modem router ethernet cabled to airport express plugged in socket on the wall. hi-fi plugged in airport express with stereo jack.
would i get wireless internet on both machines an my tunes wirellesly available on the hi-fi?
thanks for your patience!
also does anyone know whether i need to let my isp know that i'm intending to use wifi or will it work anyway?

With the AirPort Express Base Station (AX), configured as a "bridge and connected via Ethernet to your wired router, it will act like a Wireless Access Point (WAP). In this configuration, the wired router will continue to provide NAT & DHCP services for both the wired and wireless clients connected to it.
Your proposed network configuration is sound. The only issue I see may be the wireless range. The AX is advertised at 300' for 802.11b (11 Mbps), but building construction materials or other forms of Wi-Fi Interference may limit this range. The end result is that the wireless clients furthest away from the AX may experience weak or poor wireless performance.

I have a Westell 6100G modem. I want to set up Airport Express for wireless. Can someone tell me how to do it step by step. I'm using an HP with Windows Vista. I'm a tech idiot.

Just got Airport Express to save on GBs of data. I have already a Westell 6100G which is for use as Internet Broadband, via Verizon. How do I set up the Airport Express with this Westell. Do I even still need the Westell, or do I need to also buy a wireless router? I'm a tech idiot and this is driving me nuts.

The Westell 6100G is a combination modem and router or gateway device. The AirPort Express is a wireless router.
Since the Express does not have a built-in modem, you will still need your Westell gateway in order to access the Internet.
Which exact model of AirPort Express do you have. It will be written (in very hard to read type on a label on one of the AirPort's sides). It should look something like: A1392. It may also state a Order#. In that case it would look something like: MC414LL/A
Regardless of which model you have, the basic network configuration would be that you would connect an Ethernet cable between the Westell's Ethernet port and the WAN (circle of dots) port on the Express. (Note: If you have an earlier model of the Express, you would connect the cable to the only Ethernet port on the Express.)
The good news is that you will not have to make any configuration changes to the Westell. We should be able to use it as configured.
What we are going to start with is getting a basic Wi-Fi network that should provide your computer with wireless access to the Internet. Once verified as working, we can fine-tune this network to include wireless security and any other goals that you may have.
Ready to start?
I would recommend that you do the following as a minimum:
Power-down the Westell and computer(s).
While all of the devices are powered-down, perform a "factory default" reset on the AirPort Express base station. This will get it back to its "out-of-the-box" configuration and make setting it up much easier, especially if you use the "Assist me" process within the AirPort Utility. (ref: Resetting an AirPort Base Station or Time Capsule)
Once the reset has completed, remove the AirPort Express from power.
Connect an Ethernet cable between the Westell and the AirPort Express.
Power-up the Westell; wait at least 10-15 minutes to allow it adequate time to initialize.
Power-up the AirPort base station; wait at least 5-10 minutes. Note: The AirPort's status light may continue to flash amber after it has intialized. That is because, there may be some additional configuration items necessary, like setting up wireless security, before the overall setup is completed to get a green status.
Power-up your computer(s).
In this basic configuration, the AirPort base station will broadcast an unsecured wireless network with a Network Name (SSID) of Apple Network NNNNNN. Network clients, connected to the base station either by wire or wireless, should now be able to access the Internet through the ISP's modem. Once Internet connectivity has been verified, you can use the AirPort Utility to configure the base station for wireless security and any other desired options. Please post back your results.

Why does airport express force me 2go wired with my laptop-to-netgear setup

This is what I had and wanted to do: My laptop was connected wirelessly to my netgear router. i wanted to have airport express join my wireless network. after many many hours of trial and error, I've succeeded getting airport express to work with netgear. But, BUT, only if I plug an ethernet cable into my laptop to my netgear router. After getting Airport Express to wirelessly connect to my router, my windows wireless connection says windows can't connect because it failed to receive a signal or response from the router. when i force connect, it's signal strength is so low it doesn't work.
so what gives? i'm seeking a solution that will allow my to go wireless again between my laptop and my netgear router.
is it perhaps something to do with wireless channels? is the airport hogging all the space?
apple should be castigated for making it so difficult to get the Airport Express to work with third-party routers. don't sell something aimed at consumers if it takes conceivably an engineer's brain and hours of fiddling to make it work.
thanks in advance for your swift responses.

As to your first question: You should re-read my post, as I already said: the AX is connected wirelessly to the netgear router. But I'll be clearer:
This is what I had and wanted to do: My laptop was connected wirelessly to my netgear router. i wanted to have airport express join my wireless network. after many many hours of trial and error, I've succeeded getting airport express to wirelessly connect to netgear. But, BUT, only if I plug an ethernet cable into my laptop to my netgear router. After getting Airport Express to wirelessly connect to my router, my windows wireless connection says windows can't connect because it failed to receive a signal or response from the router. when i force connect, it's signal strength is so low it doesn't work.
As to your second request: I'm loath to publish my settings on this or any forum. Plus, I don't even know what you mean by "wireless pane" and "internet pane" settings. If you can explain the terms, plus convince me posting this data won't represent a security risk to me, maybe.
Finally: I don't want to set up a new wireless network, particularly because, according to Apple, with Airport Express, I don't have to. What's the point of advertising that this thing can "join an existing wireless network," particularly when it seems to have kicked off my laptop from said network?

Airport Express with Belkin N1 Wireless Router

I saw Airport Express and am very interested to buy this. However, before I proceed to buy, it would want to see if it can work with my Belkin N1 Wireless Router and how.
Preferred setup is
DSL Modem <-> Airport Express <-> Belkin N1 Wireless <-> Laptop
Can anyone advise
1. Can Airport work with Belkin N1 Wireless Router?
2. How do i setup the above configuration?
If this can work, I'm going to get one immediately!! =D

Welcome to the discussions, Richard!
Preferred setup is
DSL Modem <-> Airport Express <-> Belkin N1 Wireless <-> Laptop
The <-> is normally a display for an ethernet connection. The AirPort Express only has one ethernet port, and it will be used to connect to the DSL modem in your example.
So, it would not be possible to connect the Belkin device the AirPort Express using <-> ethernet.

Airport express with wired network

Hello,
I am looking to play my itunes library through my receiver in my living room. There is an ethernet connection there. My mainMac is in another room, also connected to the network. Can I just connect the airport express with airtunes to an outlet in the living room with the ethernet wire into it? (and then the receiver connected to the audio out, of course) My mainMac does not have a wireless card.
I would appreciate some help. Thanks.

ok, so I bought the AX because it seems that I should be able to do what I want. I plugged it into my network, but when Airport Admin Utility tries to scan for AX, nothing shows up. Any clues?
Thanks,
Mario

Airport Express with wireless Powerbook, wired PC, and multi printer

Similar Messages

Maybe you are looking for