AirPort Express won't accept my MBP to connect to internet

It's all very strange! AirPort Express seems to be working properly. I can connect to internet via wifi with iPad and my mobile phone, I can even use AirPlay from my MBP to play music on my speakers over the AirPort Express. But for some reason it won't connect to the internet. It just says I am too far away from the base station (I am 3 meters/10 ft away, with nothing blocking the signal), and wants me to run diagnostics, OR that my (correct) password is wrong. I even bought a new AirPort Express, and set up a new network, but the problem still remained. I can connect my MBP to the internet/wifi networks anywhere else without problems. To sum it up - both my MBP and my AirPort Express seems to work properly, but for some reason they just decided to break up... *sobs*

I have been having this problem for the last week. I have tried signing on at my home wifi, with the correct password. The site shows up in systems, i type the password, and the menu for "enter the password for...." comes on screen. The phone also won't hook up at work, to a public wifi outlet, and for that matter the wifi site doesn't even come up. What other info can I give to get an answer?
Thanks

Similar Messages

New airport express has error, now network can't connect to internet to

Purchased new airport express to use solely for airplay, ran airport utility and there was an error. Now airport express is not recognized and wireless network (Fios router) has no internet connection.

It's optional, but in my opinion, it would still be a good idea to perform the complete network power cycle that I outlined above. This will give the network a "fresh start" and minimize the chances of an error occurring during the setup of the Express.
Perform a Factory Default Reset as suggested by Tesserax above.
Temporarily, locate the Express in the same room or close proximity to the Actiontec modem/router and power it on for a few minutes. Do not connect an Ethernet cable to the Express, as it will be configured using wireless.
Click the WiFi icon at the top of the Mac's screen and look for a listing of New AirPort Base Station
Click on AirPort Express just below that listing
That will get the setup "wizard" running to take a minute to analyze the network and likely suggest that the Express be setup to extend the Actiontec network.
Technically, it cannot do this, but it should be able to join the Actiontec network for use with AirPlay if the security settings on the Actionec are compatible with the Express.
Enter a name that you want to call the Express and then click the Other Options button.
Select the Add to an existing network option, if not already selected, and click Next
Follow the prompts, making sure that the name of the network and password are entered correctly.
If the setup is successful, you will see a message of Setup Complete and the Express will display a green light. Click Done and move the Express to the desired location and power it back up again. The Express needs to be located where it can receive a good quality signal from the modem/router wireless.

Airport Express won't recognize TSC printer

We are having a really weird issue with a new 802.11n Airport Express. It refuses to recognize a specific USB printer attached to it (TSC TTP-245c label printer, to be precise). By "refuses to recognize" I mean the printer does not show up in the Printers dialog within the Airport Utility (5.6 in this case... don't even get me started on 6.0, which doesn't even HAVE a printer dialog anymore) and attempting to send print jobs to it fail.
Anyway, the really bizarre thing is that the Airport Express DOES see other USB printers we connect to it, and the TSC printer DOES work fine on other USB print servers, or from a notebook PC via USB, etc... even an OLD g-only Airport Express can see the TSC printer just fine. It's ONLY the specific combination of a NEW Airport Express and the TSC-245C printer that doesn't work.
I'm sure I'll get replies asking me to update a driver, update firmware, etc. So let me save you the trouble... this has absolutely nothing to do with drivers as the print server (Airport Express) itself cannot see the physical printer attached to itself, and the Airport is already running 7.6.1 (though I did try and revert back to 7.5 to see if it made any difference, and it did not). I also verified that the TSC printer is running the latest firmware available for it.
So what do you do when you have two devices that are working fine independently with OTHER devices, but won't work with EACH OTHER? Is there any way to get this information to Apple so they can investigate why their new device is having trouble with this one particular printer model? I've already started the process of telling TSC that they need to obtain a new Airport Express to see if they can figure out what's wrong, but it could very well be a problem on Apple's side... after all, their OLD Airport works against this printer just fine.
All that said, I'm not expecting to get any magical fix from these forums... I'm mainly trying to find out how this can get "run up the flagpole" at Apple so they can perhaps investigate. Is anyone aware of similar problems with OTHER brands of printers? Again, the symptom is simple: Connect a USB printer to the new AirPort Express and it just isn't seen by the Airport.
Any advice appreciated!

I don't think all printers will work.
Have you read this Apple article?
http://support.apple.com/kb/TS1253
Still not working?
If your printer still doesn't work with AirPort Base Station or Time Capsule printer sharing but does work when directly connected to your Mac, contact the printer manufacturer for additional information.
As the article states above, you would have to contact the printer manufacturer.
Apple has no control of third party vendors.

AirPort Express won't work with 7.0.2

Everything was fine til I bought a new Shuffle. It made me upgrade to 7.0.2, now my Airport Express won't work. I have firmware 6.2 and just uploaded all of the newest updates from apple.com for it (AX). The security is off on my network and the AX is connected with a green light. Still no option to choose my home stereo which is hooked up to the AX. HELP! I have spent all day trying to get this to work!!!!

My Airport Express when it is setup to extend my network while plugged into Ethernet will Create a network under settings
This is the correct setting to "extend" the network using an Ethernet connection. Technically, this is called a "roaming" network.
If I change this to Extend A Network it doesn't work properly.
This is because "Extend a wireless network" is used only when AirPort devices communicate with each other using wireless only......not Ethernet.
It would help if Apple used settings like "Extend a network using Ethernet" and "Extend a network using wireless only".....but they don't.
The AirPort Extreme will need to be configured as the main router if you want it to provide a Guest Network. It cannot do this if it is configured in Bridge Mode.

Older Airport express won't see the signal from the cable modem.

Older Airport express won't see the signal from the cable modem.
My macbook sees the AP express and I can stream music to it but no internet. If I plug the ethernet cable directly into the macbook I can see the internet

Anytime you change networking hardware, it is always a good idea to perform a complete power recycle of your networking components.
I would recommend that you do the following as a minimum:
Power-down the modem, AirPort base station, and computer(s).
Disconnect the AirPort base station from the Internet broadband modem.
While all of the devices are powered-down, perform a "factory default" reset on the base station. This will get it back to its "out-of-the-box" configuration and make setting it up much easier, especially if you use the "Assist me" process within the AirPort Utility. (ref: Resetting an AirPort Base Station or Time Capsule)
After the base station resets, go ahead and power it back down.
Reconnect the AirPort base station to the Internet broadband modem. For the Extreme and Time Capsule, be sure to connect the cable to the base station's WAN (circle-of-dots) port.
Power-up the modem; wait at least 10-15 minutes to allow it adequate time to initialize.
Power-up the AirPort base station; wait at least 5-10 minutes. Note: The AirPort's status light may continue to flash amber after it has intialized. That is because, there may be some additional configuration items necessary, like setting up wireless security, before the overall setup is completed to get a green status.
Power-up your computer(s).
In this basic configuration, the AirPort base station will broadcast an unsecured wireless network with a Network Name (SSID) of Apple Network NNNNNN. Network clients, connected to the base station either by wire or wireless, should now be able to access the Internet through the ISP's modem. Once Internet connectivity has been verified, you can use the AirPort Utility to configure the base station for wireless security and any other desired options. Please post back your results.

My Airport Express won't extend range. How to set up?

My Airport Express won't extend the range of my Airport Extreme. How should I set it up to get it to work? Stuart

When the Express is configured to "extend" it is a wireless repeater.
"Adding Wi-Fi base stations when it is unnecessary
Speaks for itself
can reduce Wi-Fi throughput because the Wi-Fi network will require more data management overhead."
As will adding another computer, iPhone or any wireless device to the network, for that matter.
FWIW, I have run 4 AirPort Expresses all setup to "extend" and noticed nothing except faster Internet browsing and download speeds throughout the house.
IF...you can connect the AirPort Express to the AirPort Extreme using an Ethernet connection, that will provide better overall performance. That is the way any commercial network is designed, except on a much larger scale.

Airport Express won't connect to internet...all is green

My Airport express won't connect to established Network in my office. I am connecting to a 10/100 base T in the building (as the modem, I assume) and want to broadcast the network for wifi. Express sets up ok, but than cannot find the internet....any suggestions? The port is live as I can directly connect it to my Mac Book and find the internet without issues.

It is possible to have a green light on the Express if some network errors are overlooked, so it may be necessary to reset the Express back to factory default settings and start over again.
Keep in mind that some networks will not allow a router to be added to the network, so a computer might work, but a router may not.
What model number of AirPort Express do you have?
What operating system are you using on the MacBook?
Do yo know if the Express has been configured to operate in Bridge Mode?

Airport Express won't connect - Is it the speakers?

I have just bought a new iMac4 and bought an airport express at the same time. Despite connecting to my chosen speakers in the same room, the airport still only flashes amber. I've reset the modem, dowloaded new firmware, checked with my ISP whether it's wireless compatible (it is) and read through the various relevant topics in this forum plus used the help on the mac itself, but still can't get it to work. Could it be that the speakers aren't compatible? They are powered ACS90 speakers I used with my old pc.

It won't be the speakers.
Is it a cable modem?
If so blank it, leave it off for at least 30 minutes or even overnight before connecting the Airport to it.
iFelix

I have recently changed my bt home hub and now my airport express won't connect to it? Any suggestions?

I have recently changed my bt home hub and now my airport express won't connect to it? Any suggestions?

Anytime you change out a modem or modem router like the HomeHub, the AirPort Express needs to be reset back to factory default settings and then set up again.
The reason for this is that the Express is retaining some or all of the settings to connect to your "old" modem or hub, so it will not work correctly with a new device unless you start over again from factory default settings on the Express.
Power up the Express for a few minutes
Hold in the reset button on the side of the Exprsss for 8-10 seconds, then release and allow a full minute for the Express to restart to a slow, blinking amber light
Now, set up the Express again, like you did originally with the "old" modem or hub that you had previously.

Airport express won't connect to cable modem

We recently moved to a new residence and just had internet service installed by a technician. Unfortunately, I didn't have my Airport Express handy while he was here, so he simply connected my Macbook Pro directly to the cable modem via ethernet cable. When I found my Airport Express, I disconnected the Macbook Pro from the cable modem and connected the Airport Express to the modem via the same ethernet cable and powered up. The Airport Express began flashing yellow but the flashing yellow never did turn the steady green that indicates the Airport Express is receiving the signal. I called my internet provider but they don't deal with router issues. What can I do?

Cable modems "remember" the device that is connected. Your modem is "remembering" your computer and looking for it when you connect the AirPort Express, so it will not connect to the AirPort Express.
You need to push the reset button on the modem and then power off the modem
Power off everything else on the network...all computers and devices
Wait 15 minutes
Make sure that the ethernet cable from the modem is connected to the AirPort Express
Power up the modem only and let it run 3-4 minutes by itself
Power up the AirPort Express and let it run a few moments
Power up each computer and device one at a time
Check for proper operation.
If...you are switching from a previous DSL service to cable, you may need to reconfigure the AirPort Express. Post back for more info on this.
Message was edited by: Bob Timmons

Airport Express won't connect to my existing network!!

I purchase an Airport Express and I want to have it connect to my wireless network, but whenever it "restarts", I just get a message telling me that it can't find the Airport after restarting it. I typed in my router password(40 bit WEP), and it just doesn't work. Can anyone help me?

Unfortunately WEP has some password inconsistencies among vendor implementations. Try using the hexadecimal equivalent.
FYI 40 bit WEP is extremely weak. If your devices support it move to WPA2 or WPA. If you have some that don't support WPA or WPA2 at least use 128 bit WEP.

I can't print wirelessly using Airport Express. I have my HP printer connected to a USB hub, and the hub to the Airport Express, but when I select the HP from the printer list, my MacBook says the printer is "off-line" - even when it is not.

I can't print wirelessly using Airport Express. I have my HP printer connected to a USB hub, and the hub to the Airport Express, but when I select the HP from the printer list, my MacBook says the printer is "off-line" - even when it is not. I've tried several USB connectors, and several different ports on my USB hub; same result. I need to have the HP connected to the hub 'cause from there it's connected to our desktop Mac.

Hi,
I am currently replying to this as it shows in the iChat Community.
I have asked the Hosts to move it to Snow Leopard (you should not lose contact with it through any email links you get)
I also don't do Wirelss printing so I can't actaully help either.
10:01 PM Friday; July 29, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb( 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

I have an Airport Express that I am trying to use connected by ethernet to my iMac G4 running Mac OS 10.4.11. I need to update the Airport software in order to use security option WPA2 Personal. I currently have Airport software v. 5.6.1.

I have an Airport Express that I am trying to use connected by ethernet to my iMac G4 running Mac OS 10.4.11. I need to update the Airport Express softwart in order to use security option WPA2 Personal to connect to the internet through my Airport Extreme. I currently have Airport Express software version 5.6.1. How can I update this software? (I can connect directly to my Airport Extreme by ethernet and download the update that way). Is a later version of A E software available for download anywhere? Any suggestions would be greatly appreciated.
Thanks.

Download and install AirPort Utility 5.4.2 for Mac OS X 10.4.11 "Tiger" here:
AirPort Utility 5.4.2
Once installed, launch AirPort Utility. It will tell you if a firmware upgrade is available for your Express.

I have qualitynet either wired internet. I buy a card good for a month at a time, I can only log into one device at any one time. Are there settings I can adjust on my airport express to allow all my devices to connect to wi-fi without having to log out.

I have qualitynet either wired internet. I buy a card good for a month at a time, I can only log into one device at any one time. Are there settings I can adjust on my airport express to allow all my devices to connect to wi-fi without having to log out of one devise before using another?

Some Internet providers that limit access to a single device at a time do so by the device's hardware MAC address. If your ISP is one of those, you may be able to substitute the MAC address of your AirPort Express base station for the computer. I would suggest that you contact them to find out if this is allowable.

While using the airport express can I listen to music streaming from the Internet?

While using the airport express can I listen to music streaming from the Internet?

The music must be in your iTunes library.
Or, you can try to add a special application like Airfoil that may allow you to stream any audio signal on your computer to the AirPort Express. It might work.
http://www.rogueamoeba.com/airfoil/

AirPort Express won't accept my MBP to connect to internet

Similar Messages

Maybe you are looking for