Airport Express Won't Play Ball With Time Capsule + WEP Security

Hi,
Not sure which forum to post this in so I might try both...
I have recently switched from using an Airport Extreme to Time Capsule as my main base station. It works fine. I also have to connect a rather ancient PC + wireless networking card to this network and it seems to be the case that I can only get this to work when I switch the wireless security mode to WEP.
The problem is that when I set up my Airport Express to extend the network it doesn't work properly. I follow the setup procedure in the Airport Utility, the green light comes on on the express, but it's not joining the network correctly. If I connect a computer to the network via the express it appears to work (get connection, correct network name) but I'm getting a self-assigned IP address and therefore no 'real' connection.
Please help! Which setting should the security be on on the Express. The options don't seem to match those on the Time Capsule, for instance I have two options for WEP (64 bit and 128 bit) and only one option on the Time Capsule which makes no mention of bit depth. Confusing.

manually set the Express in bridge mode then configure your wireless setting. I usually set the secondary routers to create their own wireless network. I like to keep all computer devices separate from each other by connecting them to different routers. Main set for N only at 5 GHZ and others set to N+B/G 2.4 GHZ.

Similar Messages

Can I link up one time capsule with two airport express, Can I link up one time capsule with two airport express

Hi, I would like to know whether I can link up one time capsule with two airport express. The result why is that I would like to put one time capsule at first floor, two airport express at 2nd floor and 3rd floor. All these three share one network. Please advise. Thanks.

There are several ways to conenct them. We need to know what it is you want to accomplish first. Do you want better Wi-Fi coverage on the second and third floors or do you want to stream music to the xpresses?

Airport Express for Itunes Invisible After Adding Time Capsule to AX Networ

One step forward, one step back.
I have an airport express linked to my airport extreme network for itunes streaming. It's worked fine forever. I recently added a time capsule to the extreme network for backup purposes using Time Machine. The extreme and TC form a single network are both connected via ethernet. The TC and express are in the same room. Time machine now is working fine. However, the airport extreme is no longer visible in itunes or airport utility. The light is green on the express and I was able to verify the settings when connecting it directly with an ethernet cable.
In setting up the AX/TC network, it called for the setting 'extend this network' not to be checked. Could that be it? As I recall, it wasn't anyway.
Any thoughts would be much appreciated.
JB

Got this working by directly connecting the Express and TC with and ethernet cable. I don't know if this is the right way for this to work since the two devices just happen to be near enough to do that. That said... I'm happy it's working.
JB

Is Airport Express the best way to extend Time Capsule wifi network?

I have a Time Capsule which I use for wifi as well as backups. I would like to extend its wifi range. Is an Airport Express the best way to do this? Or would an Airport Extreme get better range? Thanks.

Welcome to the discussions!
You did not mention whether you are trying to extend using wireless only, but we'l assume that this is the case.
The AirPort Express and the AirPort Extreme have the same range, so there would be no difference in performance between the two devices.
If you have a newer dual band Time Capsule, a dual band AirPort Extreme would extend both bands...IF....the AirPort Extreme is positioned where it can receive a strong signal from the Time Capsule. The AirPort Extreme would also provide you with 3 ethernet ports if you needed to connect any ethernet devices.
The AirPort Express will extend one band, as it is a single band device, but that may be all you need. Since the AirPort Express can plug directly into an AC outlet, it is usually somewhat easier to place the device where it will be needed.
A good location for an extending device is a point that is about 1/2 to 2/3 the distance from the Time Capsule to the area that will need more wireless coverage, assuming there no major obstructions in the signal path. The idea situation would have the extending device placed where it has close to a line-of-sight relationship with the main router.
Post back if you need configuration details on the extending device, or if you need more information.

Can I Use 802.11n Base Station and 802.11n AirPort Express in an 802.11 ac Time Capsule Main Base Station WDS Network?

I havea "wirelessly challenged" 2-story home and need to extend the range. Currently I have an 802.11n Main Base Station with an 802.11n Airport Express Remote. It's not getting the job done (upstairs connection is weak).
I am considering getting an 802.11ac Airport Time Capsule to help, even though I currently only have devices with 802.11n wireless connectivity (future-proof a little).
I an planning on setting up a Wireless Distribution System (WDS) Network:
1.) Setting up the Time Capsule as the Main Base Station connected to a Cable modem
2.) Reconfiguring and Setting up the current AirPort Extreme 802.11n as a Relay Base Station
3.) Reconfiguring and Setting up the current AirPort Express 802.11n as a Remote Station
I cannot "hard wire" one Base Statio to the other.
Will this work?

Will this work?
Unfortunately, no. WDS is a older, very inefficient way to extend the wireless network signal.
As such, newer operating systems like Lion, Mountain Lion and Mavericks do not even offer settings for this older WDS type of network.
In addition, the new Time Capsule has no capabilities to use WDS settings at all, even if you used a Mac with another operating system to try to set things up.
Even if it were possible to set up a WDS network, the speed on the network would be incredibly slow. As you know, WDS only operates at "g" wireless speed levels. Each "relay" or "remote" that you add to the network each cuts that bandwidth or speed in half.
With a WDS "main", "relay" and "remote", the network would be operating at about 14 Mbps......a tiny fraction of what the devices would be capable of providing normally.

Playing music with Time Capsule

Is there any way to play music through the Time Capsule network?
USB speakers or other?

Sorry, but no. Unlike the AirPort Express Base Station (AX), the Time Capsule does not have built-in audio circuitry.

Airport Express works fine - why doesn't Time Capsule?

Hi - I have a new Time Capsule and am very excited to get this working. Previously I have used an Airport Express to create a wireless network with very few issues. I worked through all the various setup including updating all my software. I've completed the setup via the airport utility and everything seems to work save my internet connectivity. The odd thing that I know I have a live connection via my ethernet cable given that it works fine with my airport express. I have tried all the recos as regards turning the modem and TC off / on for more than a few times. Does anyone have any advice that might help? Thanks very much, Jeff

Well you can't do it with a Time Capsule.
You could get an Apple TV instead of an Air Port Express and then you can get video as well..

Airport Utility won't let me change time capsule settings....

I've had my TC about 2 weeks, and haven't had any problems until now....
when I am in close proximity, i use it with an ethernet cable, and if i am in other parts of the house i will set it to transmit wirelessly. up until now there hasn't been any problems with this. now however, it is connected via ethernet, and when i open airport utility it recognises the TC, but when i click continue to update the settings and change it back to wireless, it get's stuck on the "reading the time capsule's configuration..." page, and after five minutes says "there was an error with the connection-6722".
I can read files from the TC and write to it. i just can't update the settings! can anyone help??
thankyou.

crillix wrote:
but when i click continue to update the settings and change it back to wireless
This has me a bit confused as to why you're doing this.
I say this because my Macbook is sometimes directly connected to the TC over a wired network connection, and sometimes wirelessly via the TC. It has no trouble backing up regardless of what connection is utilized. I just leave the wireless enabled on the TC, and so have no need to re-configure the TC. I can read the TC configuration with the Airport Utility via either connection.
I'm not sure this helps, but am I missing something??
Mac OS X, Airport Utility & TC all at latest levels......

Using airport express to extend network of 2tb time capsule.

Is it possible to use my old airport express using 802.11g to extend the network of my 2tb time capsule using 802.11ac protocol? If so, how?

You will need to use one of the 802.11n versions of the AirPort Express....either the model A1264 or A1392....if you want to wirelessly extend the signal from the Time Capsule.
The older 802.11b/g Express does not have the capability to do what you want.

Airport express as network extension for a time capsule lose connection repeatedly

Hello,
I boght recently two airport express in order to extent my timecapsule wifi. Installation as a network extension was no problem thanks airport software.
But both AP express repeatedly lose connection, sometimes after hours, sometimes after some minutes, even if they are just a few meters away from the time capsule.
What is the reason and what can I do to avoid this annoyingly behaviour?
Thanks for helping!

Hi - it can be used as an wired or wireless extender of your time capsule network or it can just join the network wirelessly and provide a remote ethernet connection - in all cases the USB port can be used for a printer only.

Configuring Airport Express as Roaming Network from a Time Capsule via Powerline Adapters

I am having an issue configuring an Airport Express to extend my WiFi network as a roaming network via powerline adapters. I have configured as other threads have advised
Open AirPort Utility - Select the AirPort Express - Manual Setup
Click the Wireless tab below the icons
Wireless Mode = Create a wireless network
Wireless Network Name = Same name as the TC network
No check mark is needed next to "Allow this network to be extended"
Radio Mode = 802.11n (802.11 b/g compatible)
Channel = Automatic
Wireless Security = Same exact setting as the TC
Wireless Password = Same password as the TC network
Confirm Password
Click the Internet icon, then click the Internet Connection tab
Connect Using = Ethernet
Connection Sharing = Off (Bridge Mode)
Update to save setings and allow 40-45 seconds for the Express to restart
The only difference is I cannot see an option under Connect Using for Ethernet here there is only the usual DHCP etc
After configuring my Apple TV can see the network and says it establishes an internet connection but Home Sharing does not show my iTunes library but will connect to internet radio.
I cannot get any other WiFi device to connect to the Airport Express but they can see it. The TC and Airport Express have been updated to latest firmware.
Any advice appreciated.

Please download and install AirPort Utility 5.6 for Mac OS X Lion
You can have both 6.0 and 5.6 on your Mac and choose the version that you want to use.
6.0 is interesting to look at, but 5.6 has much more functionality.

Airport Express won't work simultaneously with Internet Sharing

I just purchased two Intel-based iMacs (each with standard configuration including Airport cards), and 1 AX. I placed iMac #1 in Room #1 (near my cable outlet), iMac #2 in Room #2, and the AX in Room #3, along with powered speakers. Using an Ethernet cable, I connected iMac #1 to my cable modem (and its broadband internet connection). I then turned on Internet Sharing, so that iMac #2 now connects to the internet through iMac #1. I also placed the AX in another room and connected it to powered speakers. Here's the problem: Airtunes only works (i.e., the AX-connected powered speakers only show up in iTunes) when I turn off Internet Sharing. The powered speakers "disappear" from iTunes as soon as I turn Internet sharing back on.
Is there any way to fix this?

I assume that you are having this problem with iMac #1 which is doing the sharing... Perhaps this happens because iTunes will not cross subnets.
Even though iMac #1 exists on both subnets (the Ethernet one and the one created by Internet sharing) it appears that iTunes is not using the subnet created by Internet sharing. Therefore it won't cross between the Ethernet subnet and wireless subnet.
The solution is to get an inexpensive wireless router and use that instead of iMac #1 to create your wireless network.

Airport express won't hook up with modem

I cannot get my airport router to talk to my service provider modem. I know the modem works as I can hook my laptop direct to the modem and it is ok.
How can I test my Airport router.

Please try a complete power recycle of your networking hardware. Take a look at the following AirPort User Tip for details. Please post back your results.

Can i use existing airport with Time Capsule

i have already bought an airport, but can i use it with Time Capsule OR do I need to buy the $299 Time Capsule wireless hard drive?

If you are telling us that you have already bought an AirPort Extreme, and that you want to connect a USB hard drive to the AirPort and use that for Time Machine backups, this is not officially supported by Apple.
Some users seem to be able to make this work, while others.....like me....who try this have nothing but problems.
To be officially supported, you need to connect a hard drive directly to your Mac for Time Machine backups or use a Time Capsule.

Question about streaming music using AE with Time capsule

I have a time capsule with over 120gb of music stored on it. I'd like to be able to stream this music directly from the time capsule to an airport express connected to a stereo in another room. I do have an iPhone 3G with the remote app. (I have not got the airport express, yet.)
I am really hoping that I can use the iPhone remote app to control the music playing through the airport express, without having to have a computer turned on and runing iTunes.
I believe this is possible with Apple TV, but since I don't own a TV or monitor other than my laptop screen, that isn't the most practical solution.
So, can I use airport express to stream music from a time capsule, without having to run iTunes on my MacBook?
Thanks.
SevenDog

No.
You would have to have itunes running in order to stream music, or, as you point out, have an appleTV

Airport Express Won't Play Ball With Time Capsule + WEP Security

Similar Messages

Maybe you are looking for