Airport Express wont connect

Brand new out of the box and plugged in. Amber light just keeps flashing and is not reconized by my desktop or my laptop. Software was installed on both and I have a Extreme base station. HELP

Try temporarily connecting your computer to the AirPort Express (AX) via Ethernet.
Then configure the AX using the directions in KB 302153, AirPort Express: How to join an existing wireless network in client mode.

Similar Messages

Airport express wont connect to internet

i cant get my airport express to connect to the internet

I would recommend that you do the following as a minimum:
Power-down the modem, AirPort base station, and computer(s).
Power-up the modem; wait at least 10-15 minutes to allow it adequate time to initialize.
Power-up the AirPort base station; wait at least 5-10 minutes. Note: The AirPort's status light may continue to flash amber after it has intialized. That is because, there may be some additional configuration items necessary, like setting up wireless security, before the overall setup is completed to get a green status.
Power-up your computer(s).
If the above steps do not solve the problem, start over with step 1 above, but then perform the next steps between steps 1 & 2. above.
Disconnect the AirPort base station from the Internet broadband modem.
While all of the devices are powered-down, perform a "factory default" reset on the base station. This will get it back to its "out-of-the-box" configuration and make setting it up much easier, especially if you use the "Assist me" process within the AirPort Utility. (ref: Resetting an AirPort Base Station or Time Capsule)
After the base station resets, go ahead and power it back down.
Reconnect the AirPort base station to the Internet broadband modem. For the Extreme and Time Capsule, be sure to connect the cable to the base station's WAN (circle-of-dots) port.
Continue with step 2 in the first set of steps.
In this basic configuration, the AirPort base station will broadcast an unsecured wireless network with a Network Name (SSID) of Apple Network NNNNNN. Network clients, connected to the base station either by wire or wireless, should now be able to access the Internet through the ISP's modem. Once Internet connectivity has been verified, you can use the AirPort Utility to configure the base station for wireless security and any other desired options. Please post back your results.

Airport express wont connect anything but my macbook pro

Hello!
I've searched but cannot find an answer to this question so here goes:
Today I purchased an AirPort Express and was able to configure my MacBook Pro to connect to it problem free. I've created the network using airport utility but none of the other devices in my household can connect to the network: iPhone 4s, iPhone 5, AppleTV, & iPad Mini. They all discover the device but none will connect.
Help me please!!!!
Thanks!!!!

Very simple solution: I was in Bridge Mode and switched it over to DHCP and NAT. Boom....problem solved.

Airport Express wont connect with iTunes Win XP

I have had two airport express devices to stream music from my XP machine through iTunes to two rooms in my house. My wireless network was unsecured so I wanted to secure it and then reconfigure all my devices. When I went to reconfigure the airport devices, I reset them, connected an internet cable to them, went through the Airport Utility routine, entered the right network name and password keys, and got the big green check mark at the end. The light on the Airport turned green, I unplugged the internet cable, it stayed green. Opened iTunes and saw my new device in the itunes window. But when I clicked on it, iTunes couldnt stream any music to it and finally gave up. Opening up airport utility it says it cant find any devices on the network even thought the light is green.
Any help please. I have spent all day trying to figure out what the deal is. I have been a user for multiple years and now cant even configure back to an unsecured network as before. I do run Msft Live One Care but the firewall doesnt seem to matter.
Thanks,

It seems the issue is with the ActionTec PK5000 modem/router. ActionTec confirms an issue with the units ability to stream music/media via wireless. No answer as to when this will be fixed.

Airport express wont show up in utilities wireless or wired

some times my airport express wont show up in airport utilities on both mine and my wifes macbooks but my i pads and phones keep connection to internet but the books wont. i run ethernet cable to the macbook and sometime it reads the express and some times it wont not quite sure whats wrong.

Thank you for your post, but I do not understand why you are giving me a link to the generic airport express site. The configuration I have was working fine before I upgraded my router.

How do I use the airport express to connect a remote PC via ethernet cable and access the internet via wireless connection, How do I use the airport express to connect a remote PC via ethernet cable and access the internet via wireless connection

Trying to connect my xbox to the airport express. Have wireless in home and do not have a ethernet point behind tv/xbox. How do I configure the airport express to connect to my wireless network and then the airport express can use its connection via ethernet to connect the xbox to the internet.

Is your AirPort Express Base Station (AX) a 802.11n model? If it is, you can reconfigure it as a wireless Ethernet bridge or ProxySTA. This would allow the AX to join another wireless network and have its Ethernet port enabled for wired clients, like the Xbox 360.
To activate ProxySTA, you must set up the Express to join a wireless network and then enable the Allow Ethernet Clients setting; both settings are located in the Wireless tab of AirPort Utility.

Can I use the Airport Express to connect to a Linksys Wireless Network and then use the Ethernet port on the Airport for a wired connection to a device for internet access? Would I be able to then also use that Ethernet pt to a Ntwk Hub for more wired c

Thanks for the help. Looked but not clear on what I am trying to do as being possible. Can I use an Airport Express to connect wireless to a Linksys Wireless Router, such that I can then use the Ethernet ports on the Airport to either connected to a PC wired, or even use a hub off the Airport Express to allow multiple wired connections to it?
I am not looking to have the Airport Express extend my wireless network, just connect to it and provide me wired connections in a different location from where my Linksys Route is located. Would prefer to replace Linksys with all Apple, but just not possible financially yet. Thanks for the help.

If the AirPort Express Base Station (AX) is an 802.11n model, then yes, you can reconfigure it as a wireless Ethernet bridge. In this configuration, the AX would join the wireless network provided by the Linksys router and its Ethernet port would be enabled for either a single wired device or for an Ethernet hub or switch for multiple devices.

I can print from my macbook pro using airport express usb connected printer, however my iPad is looking for an airprint printer. Can I direct the iPad to the usb connected printer. Both macbook and iPad confirm a wifi connection through the airport exp.

I can print from my macbook pro using airport express usb connected printer, however my iPad and iphone are looking for an airprint printer. Can I direct the iPad/iphone to the usb connected printer. Macbook iphone and iPad confirm a wifi connection through the airport express.

You will need to install an App like Print Central on the iPad to try to print to the printer. It will allow you to print to most printers. Check with their support folks if you need more info.
PrintCentral for iPad on the iTunes App Store

Do I need to have Airport Express to connect to other computers on our homer network?

Do I need to have Airport Express to connect to other computers on our homer network?

Not necessarily. You could use the "Create Network" feature of your MBP's built-in AirPort card to provide an Ad-hoc wireless network for local wireless-capable computers to connect to.

Can I use Airport Express to connect to a printer, Time Machine Back up drive, second b/u drive, and scanner through a USB hub? if so, how?

I have an Airport Express that connects to my printer. I'd like to add a scanner, and two back up drives (one for use with Time Capsule, another specifically for photographs backed up from Adobe Lightroom.
The printer connects to the Airport Express through a USB hub and is recognized. I cannot get the scanner nor either of the back up drives to be recognized. Is there a way to do it or will I need to rely on a USB hub wired to the USB port of the MacBookPro? If it is possible, can you walk me through the set up for each?
Thanks,
Doug Earle

I'd like to add a scanner, and two back up drives (one for use with Time Capsule, another specifically for photographs backed up from Adobe Lightroom.
Unfortunately, the USB port on the AirPort Express will only work with a compatible printer.
It will not work with a scanner, copier, or hard drive.
It should be possible to do what you want by connecting a powered USB hub to your Mac and then connecting the devices to the powered hub.
The setup for the scanner and hard drive would be covered by the manfacturers documentation, so providing specific advice for those types of products would be outside the realm of this support area.
But, if you can provide model numbers, it is always possible that another user who is using those products might see this post.

Help!! can't get my airport express to connect to my network

I have set up my airport express to connect to my network so I can play itunes with it but it says that the Airport has been set up but cannot connect To my network. I've tried it on both my computer and my wife's computer and we have the same problem. I have been able to connect in the past with my Airport express that I had for this one but for some reason I can't seem to connect it using this airport express. Any help would be much appreciated.

When joining a non-Apple WEP encrypted wireless network with an AirPort, you must use one of two different styles for password entry depending on whether the network is protected with an ASCII or HEX key.
ASCII password
If using a password that is plain ASCII text, use the double quotation mark (") before and after the password. These are case-sensitive, and they are at least five characters long for 40-bit encrypted networks or at least 13 characters long for 128-bit encrypted networks.
Hexadecimal password
If using a password that uses only the hexadecimal range of characters, add a dollar sign ($) before the password. These passwords are at least 10 characters long for 40-bit encrypted networks or at least 26 characters long for 128-bit encrypted networks.

I have a MacPro 2008 workstation without Airport or Airport Extreme CArd isntalled. Can I use Airport Express to connect (wireless) to my wireless network? If so, can I then connect my Airport Extreme to my MAcPro by a ethernetcable ?

I have a MacPro 2008 workstation. It has no Airport/Airport card so I have to use an ethernetcable to connect to my modem. As the MAcpro
is in my office in the attic and the wireless modem is in the basement I have a problem. I wonder if it is possible to use Airport Express to connect to the wireless network? Itshould be like this: in my office I connect the MacPro with AE through an ethernet cable. If I can then get AE to connect (wireless...) to my wireless network I should be ablle to connect my MacPro to internet/wireless network. Is this possible???? Any suggestions are very much appriciated. Thank you.

Apple calls this configuration a ProxySTA.
To activate ProxySTA, you must set up the Express to join a wireless network and then enable the Allow Ethernet Clients setting; both settings are located in the Wireless tab of AirPort Utility.

Airport express wont hold

Airport express won't hold the change to extend a network. I have restarted many times and still flashes amber.
Please assist. thanks

Try connecting your airport express directly to your computer through ethernet. Plug it in and wait a minute or so for it to boot. The airport utility should discover it. There could be something in your router that is blocking access to the airport express. Connecting it directly to your computer should obviate this. To set it up, select your router's wireless SSID, enter the password for the SSID, then select extend a wireless network. It should reboot and give you a green light. Then you can unplug the ethernet cable and put it whever you like. It does take a minute or so to restablish a green light when you plug it back in.

Can multiple Airport Expresses be connected via ethernet to an Airport Extreme to extend a single WiFi Network?

I am a big fan of both the Airport Extreme and Airport Express. In my work environment, I need to create a good quality single wireless network around 2 large aircraft hangars and some offices at the perimeters. We have a good quality wired Cat5e ethernet network extended between the buildings and offices now. Is this possible and does it seem like a good practical solution? I think that 4 or 5 Airport expresses would easily provide good wireless coverage in the needed areas.

Can multiple AirPort Expresses be connected via ethernet to an AirPort Extreme to extend a single WiFi Network?
Yes, this will work just fine as long as any individual Ethernet cable run will not exceed much over 330 feet or about 100 meters.

Can I use airport express without connecting to a router?

I hate trailing a long wire across my room just to listen to music through my (old but still fantastic) stereo system. I share a house with friends and our router is in the living room.. does the airport express need the router to work? sorry if this is a dumb question, there just doesn't seem to be an answer anywhere!

You do not need the AirPort Express to connect to a router in order to stream iTunes. In its default mode, the AX provides a standalone wireless network. You would just need to connect to this network to stream. The drawback, of course, is if your are getting your Internet access via another wireless network, you would have to switch networks to perform either.

Airport Express wont connect

Similar Messages

Maybe you are looking for