Airport Express Works but doesn't show up in Airport Utility

I have a network hard wired to each floor in the house. On the second floor I have connected an Airport Express and sucessfully established a wireless signal (my iphone and dell connect to it), however I can't see this express in Airport Utility. Any suggestions as to why not? Its a pretty old AE. My desire is to have a non wireless laser printer connected by USB to the AE and therefore be visible to computers on different floors of the house.
Alastair

A USB printer connected to the Airport Express USB port is shareable with other computers on the network.
If your AE is pretty old, make sure that you've upgraded it to the latest firmware.
Try connecting the Express directly to a computer via an ethernet port and use the airport utility to confirm that it is configured correctly and then moving it to it's final location.

Similar Messages

BB protect works but doesn't show the location

Hello I have installed BB Protect on my 9320. I have also switched on the GPS and the Wifi too. Enabled the Protect too. But when I log on to BB account, it doesn't show me the location of the device. It says unable to track the location. But everything shows fine in the Protect account on my laptop, like I can even see the current correct battery amount. So it means the device does connect with the account but why does it not show the location. What else can I do. I really need it to be working.
Please help. I will be very very very grateful to you. P.S.: I am with Mobilicity in Canada and the phone was purchased from Mobilicity too. Thank you.

Hi there,
There is an option during the setup of BlackBerry Protect that is required to enable this ability. To fix this, go into BlackBerry Protect on the device, press the BB Menu button and select Options, then make sure Location Reporting is turned on.
I hope that helps.
If you want to thank someone for their comment, do so by clicking the Thumbs Up icon.
If your issue is resolved, don't forget to click the Solution button on the resolution!

LR 4.4 works but doesn't show photos?

My computer died and needed a lot of work, including a new mother board and new graphics cards. Now LR 4.4 doesn't show photo's. LR seems to be working well in every other way but where the photos should be the spaces are blank. I vaguely remember something like this happening before but I don't remember the solution. Any suggestions?
Thanks,
Doug

The drive names are the same and LR is still listing the HD names and files correctly.
From this screen shot you can see that LR finds the files and their sizes and ratings but there are no images.

No mouse pointer when connected to TV Samsung led40/6500. Mouse works but doesn't show?

Just bought Mac Mini. Connected to Samsung 40/6500 ledtv. using mouse pad but no pointer seen. Finally found the resolution working, but not the right resolution. Should be 1920x1080 @ 60 hz via HDMI. Mac Mini's best is much different from this. How can I find the right resolution on my Mac Mini.

It actually works fine on my sons Lumatron cheap tv! But not on the Samsung led tv?
To start with I used an app on my Iphone to recieve the image from the Mac Mini and then try to find the right resolution on the MAC. Because every time I choose the wrong one the display went black. I could then still see the image on my phone and troubleshoot my way through...

Disk works, but doesn't show in Finder?

I have a fully functioning disk in my PowerMac G5 Dual 2.5GHz machine, yet it doesn't always show up in the Finder. I cannot add it to the Sidebar, and yet mostly it shows in the list when I select my computer's icon. It is shaded, however, not solid like the other disk's icon. This is the second internal drive, a relatively new drive which apart from this anomaly has caused no problems. Disk Utility sees it fine, and a Repair Disk finds nothing.
Does anyone have any idea what might be going on here?
I have had some sporadic permissions problems here and there since I installed Leopard. Something went a little awry during the install, and even after a complete reinstall, I still had to restore certain data from backups, so one possibility might be some incorrect permissions somewhere. Repair Permissions on the bootup drive doesn't find anything though.
I have 10.5.4 installed (this option isn't in the dropdown for OS).
Message was edited by: Carsten Whimster
Message was edited by: Carsten Whimster

It turns out that I misread the manpage. The '@' after the permissions doesn't mean soft link, but rather extended attributes. Using 'ls -lO' I could see that a "hidden" extended attribute had been added, which I was then able to remove by logging in as administrator, and typing 'sudo chflags nohidden Data', in the specific case of my Data drive.
Here is more info:
http://discussions.apple.com/thread.jspa?threadID=1324110&tstart=1078

Quicken works but doesn't show up in Dock

Quicken 2000 v.16.1.2 does work in Mountain Lion, but it does NOT show up in the Dock or in Application Switcher (Command-Tab).

Does this happen with other applications?
Try opening a Terminal window and typing:
killall Dock
Which will restart the Dock. I bet it shows up. Other folks have had issues with this and it's usually the Dock has crashed.

Airport Express works, but MacBook doesn't when connected directly to Modem

I have an interesting problem. I have Verizon DSL. Airport Express works, but Linksys and Netgear wifi routers don't work. Further more, if I disconnect the wifi router and directly connect a MacBook or a Windows notebook they don't work. These devices work if I enter a static IP address though. It is DHCP that doesn't work.
I have been using Verizon DSL for several years, and most recently I was using a Netgear wifi router. A few days ago it lost internet connection. Thinking that the Netgear broke, I bought a new Linksys WRT54GL to replace it. But it didn't work either. I happened to have an Airport Express lying around, so I connected that and surprisingly it worked! Then I wrote down the IP address shown by Airport Utility and typed that IP into Netgear as a static IP address and it worked too. If I remove all wifi equipment and connect a Windows PC or a MacBook directly to the DSL modem then neither works. (Note: my DSL modem doesn't use PPPoE it uses DHCP.)
So it seems that something changed with Verizon's DHCP such that only Airport Express can work. Contacting Verizon support was useless. What is so magical about Airport Express? I can't use Airport Express permanently because I have 3 wired computers to connect also, and Airport Express have ethernet ports. Airport Extreme does, so I am wondering if I should get one of those. Will the magic of Airport Express work in Extreme also?
Does anyone know what is going on? How is Airport Express work with Verizon DHCP when nothing else can?

Hello petilon. Welcome to the Apple Discussions!
Does anyone know what is going on? How is Airport Express work with Verizon DHCP when nothing else can?
It sounds like Verizon is keying on the MAC address of the device connected to its modem ... so either they require that you register a MAC address with them or there is a problem with the modem in that it is retaining it even though you change the device connected.
If you haven't already, be sure to perform a complete power recycle when changing out network equipment. The following should be done each time:
o Power-down, the modem, router, and computer(s); wait at least 10-15 minutes. Order is not critical. If the modem has a backup battery, it should be removed and replaced to make sure that any stored configuration information is erased.
o Power-up the modem; wait at least 10-15 minutes.
o Power-up the router; wait at least 5-10 minutes.
o Power-up the computer(s).

Trying to install airport 5.6 to configure old UFO airport but doesn't show up in the app utility folder. How do you configure older Airports in OS X 10.7.5??

trying to install airport 5.6 to configure old UFO airport but doesn't show up in the app utility folder. How do you configure older Airports in OS X 10.7.5??

David Why? wrote:
... How do you configure older Airports in OS X 10.7.5??
Use the technique described in this thread: I can't install airport utility 5.6
Though it discusses Mountain Lion, you need to follow the exact same steps for OS X 10.7.5.
I no longer have any original AEBSs to test. You may need an even earlier version of AirPort Utility. If AirPort Utility 5.6 cannot configure yours, let me know and I will attempt to find the correct version for you. You will need to use the same "extraction" technique described above.
Edit: If 5.6 does not work try this one: AirPort Utility 5.5.3
Important: If you elect to drag that version to your Utilities folder, be sure to give it a unique name. I suggest "AirPort Utility 5.5.3" This is not necessary for AirPort Utility 5.6, which will retain that name on its own.

TS4057 I did this and now my videos are not working. They show the pictures aren't there on some and on others it shows they are there, but doesn't show them in the player. When I try to Share anything it just says Waiting for Processing for hours. What d

I did this and now my videos are not working. They show the pictures aren't there on some and on others it shows they are there, but doesn't show them in the player. When I try to Share anything it just says Waiting for Processing for hours. What do I do?
I also got Motion and can't figure out how to use it with Final Cut Pro X. Any help woud be great. Thanks

I have no idea what may have caused your MacBook to stop working, but from your description it kind of sounds like it may have started before you ran Software Update and installed the new Apps. Just the general slow feeling and bugginess is what tips me off. You said that you weren't sure if you had closed all open windows, that doesn't matter if the computer restarts itself. It automatically closes all other open applications when restarting.
As to your data being retrievable, if when you take it in they do a fresh install of the OS, then no, it will not be unless you want to pay several thousand dollars to a software retrieval company.
I am glad to hear that you have taken into the Apple Store to get it fixed, and that you have all of your purchased music backed up to your iPod. You should be able to just transfer it all back to iTunes once you get your computer back should it be necessary.
As a side note, the proper place for this topic would probably in the MacBook forums, not iTunes since there is no evidence that iTunes started the issue.

ISight works fine in iChat but doesn't show up in Yahoo Messenger nor Skype

Hello, I was given an iSight webcam that works fine in iChat, but doesn't show up in Yahoo Messenger nor Skype, which are the IM programs I use…
I search on the Apple Support site a driver to download, but there is only an updater (iSight Updater 1.0.3) which doesn't run on Tiger... Any help please ?? Thx

You probably don't need it, but the Tiger "iSight Updater" is located in the \System\Library\CoreServices\iSight Updaters\iSight Updater folder.
(You must look manually because SpotLight does not find it.)
Double click the "iSight Updater" there to run the Firmware update manually.
Some options for other readers:
http://discussions.apple.com/thread.jspa?messageID=10084429&#10084429
iSight "Product Revision Level" in your Mac's System Profiler shows the installed firmware version for external (Firewire) iSight.
Firmware 1.0.3 Update offers only "Improved audio performance". It does NOT enable audio or any other function, so that is NOT your problem with Skype or YMM. Search or post in their dedicated help/discussions for best and quickest help with those specific, non-Apple apps.
Regardless of whether System Profiler utility shows Firewire iSight's Firmware (Product) level of 1.0.2 or 1.0.3, external iSight ought to work. You can test your external iSight using the suggestions on this linked page:
http://www.ralphjohns.co.uk/EZJim/EZJimpage4.html
EZ Jim
“I may receive some form of compensation, financial or otherwise, from my recommendation or link."
Mac Pro Quad Core (Early 2009) 2.93Ghz w/Mac OS X (10.6.2) MacBook Pro (13 inch, Mid 2009) 2.26GHz (10.6.2)
LED Cinema Display G4 PowerBook 1.67GHz (10.4.11) iBookSE 366MHz (10.3.9) External iSight

My caller id is not working on iphone 5 - it beeps but doesn't show who is calling or let me click over

I have recently had my iphone 5 not show who is calling on call waiting. The phone beeps but doesn't show the number / per son that is calling, won't let me click over and won't show who it was in my call history. Help very annoying.

1st go into your settings then tap phone to see if call waiting is turned on or off. If call waiting isOFF turn it ON. You can use also Apple article HT 4515. I would contact my wireless carrier reguarding the caller id not showing up and also with help reguarding your call waiting as well
Hope this helps

Just installed Final Cut Express 4 but doesn't open

Hey I'm a dummy but....Just installed Final Cut Express 4 but doesn't open tells me I don't have the AGP graphics card,my ATI Radeon X1600?Do some imac 1.83 Intel Core Duo come with out it?I'm freek'n stuck!!Any help would be Greatly appreciated!!

Al's suggestion should solve the problem.
However, if you get fed up with hitting the esc key every time you open FCE you could try this permanent cure .......... it's nowhere near as frightening as it sounds and only takes a minute !
For a permanent cure edit the info.plist like this:-
1. Right click on the FCE icon (in Applications NOT the Dock) and select "Show Package Contents".
2. Open the "Contents" folder and double click the "info .plist". It should open automatically in TextEdit - if it doesn't, choose TextEdit manually.
3. Around 15 or so lines down you will see AGP. Delete it and put in PCI.
4. Close the window and when asked if you want to save the changes, say yes.

SSI shows up correctly in DW but doesn't show up in browser.

I am trying to update the company website here at work using Dreamweaver 4 and the copyright information at the bottom of the page is in an ssi file. The file shows up fine in Dreamweaver but doesn't show up at all in either of my browers (Safari/Firefox). What am I doing wrong?

The file shows up fine in Dreamweaver but doesn't show up at all in either of my browers (Safari/Firefox). What am I doing wrong?
SSIs are parsed by the server. You're probably not doing anything wrong, you simply need to upload the files to your remote server and look at the pages on-line.
If you want to preview local files, you'll need to install a local testing server on your machine. Get one of the following servers for your OS and follow the installation instructions.
WAMP for Windows
http://www.wampserver.com/en/
XAMPP for Windows
http://www.apachefriends.org/en/xampp-windows.html
XAMPP for Mac
http://www.apachefriends.org/en/xampp-macosx.html
MAMP for Mac
http://www.mamp.info/en/downloads/index.html
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb

I have an iPhone 5 with LTE 4G but doesn't show this option in the settings.Can you help me please.

I have an iPhone 5 with LTE 4G but doesn't show this option in the settings.Can you help me please.

Ask your carrier. No one here works for Apple, represents Apple or Speaks for Apple, thus no one here can answer your question.

Asked a mo. ago why hot sync appears to work but doesn't--zero responses from Palm so trying again

hot sync appears to work but doesn't transfer info! Options    dee20002
Regular Visitor
Posts: 4
Registered: 09-10-2008
Palm Z22
Message 1 of 7
Viewed 449 times
hot sync appears to work but doesn't transfer info! Options    dee20002
Regular Visitor
Posts: 4
Registered: 09-10-2008
Palm Z22
Message 1 of 7
Viewed 449 times
I admit, it's been awhile since I synchronized. Just did so, and all appeared right with the world, the handheld made the appropriate noises and showed the appropriate actions and same on the computer (XP, connect as always have through USB). In other words, they appeared to "talk" and said they were synchronizing. But my data (like important calendar entries) is simply not there. Nothing. Nada.  Nothing recently added.
I tried repeating it several times. Yes, I have the system set up so that desktop overrides handheld.  So what's up? Used this a lot in the past, never had this happen.
Thanks for any help.
Using XP and the original hot sync that came with palm and that I've always used--no changes. Help????
Dee
Post relates to: Palm Z22
Post relates to: Palm Z22
Post relates to: Palm Z22

I'm having the same problem though not with the exact same components. I have a Palm Z22 and Windows Vista--things were going great until a few days ago when I noticed that the palm weren't connecting. The Hotsync process proceeds normally, there are no problems noted in the hotsync log, and yet things do not travel from the computer to the palm and vice versa. I've tried pretty much everything: I know the palm is connected to the desktop, not Outlook; I have tried soft and hard resets; I have uninstalled and reinstalled the software multiple times; I know the username is correct.
I suspect the problem has something to do with Vista; when I restored my computer to a previous time it started working fine but this morning it stopped again. The computer may be automatically updating in a way that is preventing the Palm Desktop software (verson 4.2) from working. Version 6.2 seems to work but I really hate it--there's no color schemes or categories. If someone could help me out with this I would really, really appreciate it.
Post relates to: Palm Z22

Airport Express Works but doesn't show up in Airport Utility

Similar Messages

Maybe you are looking for