Airport Express works with every device except base PC

I recently purchased an Airport Express to replace my dead Netgear wireless router. After installing the software on my laptop (which is also new, but worked with the old Netgear router), I was unable to connect to the network. My iPad, our iPhones, and her laptop all connect easily. I've tried rebooting my Comcast modem, and several other things I've read in forums to no avail. Did I miss something when setting up the software? I'm no exactly tech savvy when it comes to this kind of stuff, so any help you guys could give would be awesome!!

Change the channel on the Airport Express to a channel between 1 and 11 and see if that makes a difference.

Similar Messages

Does Airport Express work with Airport Base Station (not Airport Extreme)?

I'm needing to extend the range of my Airport base station. I purchased an Airport Extreme to funcion as a repeater, but it's not working. Will Airport Express work with a (white) Airport base station. If not, how can I extend the range besides moving the base station?

Can someone actually tell me how to set-up the Airport Express (with my Airport) so that it will act like a repeater. Once again, this is an Airport and not an Airport Extreme.

Does airport express work with garage band in lion?

Actually I know it can work and there are apps out there to make it work but I heard a rumor that Apple was going to allow functionaliy between the two in Lion. So my question is...
Will Airport Express work with Garage Band in Lion or do I have to buy third party software?

I believe the HP 2840 can be connected either via Ethernet or USB. If connected to the AirPort Express Base Station (AX) by USB, only the basic printing functions will be shared out; the scanning, faxing, copying features are not supported.
If the AX is configured so that its Ethernet port is enabled, the it may be possible to gain all of the printer's features by connecting it to the AX by Ethernet. In this case, the printer will use its own Print server to share out all of these features.

Does The Airport Express Work with Any Router?

Hi Forum,
i have an old Linksys router G Wifi speeds, does the Airport Express work with this?

The AirPort Express or other Apple routers will not wirelessly extend the signal from your Linksys router, if that is what you are asking here.
If yes, use another Linksys product to insure compatibility between devices.

Does airport express work with PC

Does airport express work with a dell laptop?
Can one setup an airport express for the very first time using a dell laptop?

Yes on both. FWIW, I currently have a Dell laptop that has no issues connecting to my AirPort network. I also have AirPort Utility for Windows installed on this laptop when I need to administer the base station. In my case the laptop is running Windows 7.

Will airport express work with 3G wirelessly without access to Y Fi connection ? (usinmg an iPad )

I do not have wi Fi at work. Will airport express work with just the 3G on my Ipad2?

In addition to Keith's comments, if you are asking if the iPad can configure an Apple router like the AirPort Express, the answer would be yes, if you download and install AirPort Utility from the App Store. It's free.
I'm assuming that you have a newer version of the Express. Check the Model No on the side of the device. It needs to be A1264.
http://itunes.apple.com/us/app/airport-utility/id427276530
if you do not have an Ethernet Internet connection to connect to the Ethernet port on the Express, you can still use the Express to "Create a wireless network", but of course devices will not be able to connect to the Internet. The Express will complain, but you can ignore the error messages.
If your printer is wireless, hopefully it is an AirPrint compatible printer. Then you would be able to print from the iPad. Check this Apple Support document for information about compatible printers. There might be other applications that would allow this as well. Check Keith's post for that info.
http://support.apple.com/kb/HT4356
I'm still not clear on exactly what you are trying to do, and devices that you have, so if you can state your goals again....we can make sure that we are not missing something.

HT1218 How can I make my first generation AirPort Express work with Mountain Lion? I have a 13" MacBook Pro (non-retina).

How can I make my first generation AirPort Express work with Mountain Lion? I have a 13" MacBook Pro (non-retina).

Hi guys, recently had the same issue. You require an older version of Airport Utility to configure the older Airport Express. It can be found here.
http://www.google.com/url?sa=t&rct=j&q=airport%20utility%205.6%20for%20lion&sour ce=web&cd=1&ved=0CFMQFjAA&url=http%3A%2F%2Fsupport.apple.com%2Fkb%2FDL1482&ei=Ip MBUPLwLoq42wW4puXMBA&usg=AFQjCNGOFUPMM0ZjsKeyj5CcL2oe9Eaf7A

Does Airport Express work with a Windows Computer?

Does Airport Express work with a Windows Computer?
I'm trying to setup an older Airport Express to play iTunes
with a Windows Computer. I just want it to join my network,
since I'm already connected to another router.
Thanks,
Paul

Is there a Windows version of the Airport Utility (I think that's what it's called)...
Yes. That is only needed to configure the AirPort Express (AX).
...or do I have to go through Windows setup software?
You may have to do that to get Windows to join the wireless network.

Does Airport express work with Mac os X.2.8?

G3 with 10.2 and airport 3.1
Airport express working properly with my ImacG5 and the Ibook G4 of my friend os 10.4 in 802.11b/g mode and WEP 128 bits.
But my Ibook G3 still not detecting my network.
I'm sure the airport card is ok, because I managed to use a local network with an other Ibook.
Thank you for help.

Yes you should be able to access the wireless network created by the AirPort Express regardless of which version of the Mac OS you are using.

Does the Airport express work with apple TV?

does the airport express base station work with apple tv and connected devices, like the same way it would over a wi-fi router?

Yes. The AirPort Express Base Station (AX) is a Wi-Fi router and supports the Apple TV for connectivity.

Will an old Airport Express work with a 4th generation AirPort Extreme?

My Airport Express model A1084 will not seem to work with my 4th generation AirPort Extreme.
I've tried everything I could think of to get it to work.
I am able to set it up(Extend existing network) with a copy of Snow Leopard but although it has a green light and seems to be working, I can't pick up a signal on any of my devices. Everything on iStumbler looks ok to me except the channel on the Airport express is 3 and the Extreme is 149. The Express is on the 2.4 ghz and the Extreme is 5ghz. What should I look for on iStumbler that might give me a clue?
Thanks,
Mot

The A1084 does not have a setting to "extend a wireless network", so it cannot be used for that purpose with the newer AirPort Extreme.
The A1084 Express can "join" the wireless network provided by the AirPort Extreme, and be used for AirPlay and to run a remote USB printer, but the Express does not provide any additional wireless signal coverage when it joins a wireless network.
You need the new A1392 version of the Express or the previous version, the A1264 if you want the Express to "extend" a wireless network wirelessly.
The older A1084 Express could be used to provide more wireless coverage if you can permanently connect the Express to the Extreme with a wired Ethernet cable connection.

Airport Express works with Bose radio, but not with my amp. Why?

Hello everyone.
I have a Bose Wave Radio that's about 10 years old. I'm able to connect it to my Airport Express via the 3.5mm jack/ RCA (red/white) cable.
I can stream Airtunes (from my Macbook Pro) into it fine, with normal functionality and volume control, including using Apple Remote on my iPhone 4.
Now the problem:
When I take that same red/white RCA cable (while it's streaming good music to the Bose), unplug it, and plug it into my amp (an old Kenwood), I can hear the music, but just barely. Even with all volume sliders all the way up, and the amp volume near max, the music is barely audible.
I've tried hard reset on the Express, and I've tried every possible RCA and speaker connection on the back of my amp.
Why does the Bose work normally, but my nice amp produces barely audible sound?
Is there a fix for this?
Thanks!

Based on the information in your post, you know two important things:
1) The AirPort Express is operating correctly
2) The cable/adapter that you are using is working correctly as well
So, the problem is with your amplifier. You don't have the Tape Monitor button pushed in, do you?
Have you checked the amplifer with other audio sources and cables? If you have an iPhone, iPod or any other similar audio device with an audio output jack, give that a try and see if you get the same results. If you do, this again confirms that the problem is with your amplifier, not the AirPort Express or your audio cable.

Can older Airport Express work with new Airport Extreme?

I had an older airport base station (dome shaped) and I was extending it with an Airport Express. I didn't need extra range, it was so I could play my iTunes from my laptop through my home speakers (or use my iPhone to do the same). Now I bought one of the newer flat Base Stations but I can't seem to get it to hook up to the old Express so I can still play my music. Do the old Express's not work with the new base stations?
And if not, is there any other way for me to be able to play music wirelessly to my home stereo from my mac and iPhone/iPods, like I was able to do before?

Im thinking my Airport Express has failed. I tried hard resetting it several times and I can see it through Airport utility, nor my iPhone. The iPhone sees it, but it cannot set it up.
Looks like I need to get a new Airport Express no matter what. Ive had it for a Looooong time. So I guess its number was finally up.
Thanks for the response seancobrien.

Airport Express works with my Mac but not XP Pro

Hello I have an Airport Express that I set up and use with my G4 laptop flawlessly.
My Problem is trying to get my PC, running XP Pro, to play-nice with the Airport Express.
The nutty thing is that this set up was working perfectly for months and then quit for some reason. Anyway, the I use WEP encryption and I have the same passwords set for both computers. Now, the PC sees the AE and is apparently able to connect with it but gives the alert that it has only limited connectivity and functionality with the network. Strange...
Now, as far as I can tell there are two passwords to the AE. One is the Base Station password and the other one is for the encryption. The PC never seems to ask for the Base Station password which seems odd. As I said before, this worked well at one time (with WEP) so I don't know what's going on. I also obviously don't know XP at all so I apologize. Any advice is greatly appreciated. Thanks very much.
-B

Thanks for the link. I have set the AE to use WPA encryption using a 13 character plain-text network key password. I'm led to believe that this would be a palateable password for both the Mac and PC...of course this doesn't fix things. I should know that simply entering the same network key on both computers would not work. That would be too easy... Well now, in XP under Network Properties it only offers WEP or None for Data Encryption. This is weird right? Thanks a lot for all your help.
-B

Airport Express worked with previous ADSL modem, not working with new one

hello all.
maybe the majority of you people won't be able to help me, since i am in Brazil.
this is the story:
for the last 4 years i was a subscriber of the Speedy ADSL provider (in conjunction with the Terra content provider). the Sppedy service is part of the Telefonica telephone company and uses the regular telephone infrastructure to provide the ADSL signal thru telephone lines.
approximately 2 years ago i bought an Airport Express and set it up with the ADSL modem that Speedy provided to me. configuration was a breeze and it worked flawlessly since then.
as of last thursday (april 7th) i became a subscriber of the Ajato ADSL provider. the Ajato company is part of the TVA (cable tv) company and uses the TVA cable tv infrastructure to provide the ADSL signal.
the problem is: when i connect the Cisco DPC3000 ADSL modem to my Macbook via ethernet cable, i can surf the internet with Ajato with no problems. but when i connect the modem to my Airport Express (even though i have reset AE in order to clear the previous Speedy/Terra configuration), i get no internet in my home wireless network.
i know you guys don't have Ajato there, of course. but i suppose some of you might have faced similar problems in similar cable ADSL environments.
this said, any kind of help or hint is greatly appreciated.
Message was edited by: Amaury Vargas: typos

Amaury Vargas wrote:
when i connect the Cisco DPC3000 ADSL modem to my Macbook via ethernet cable, i can surf the internet with Ajato with no problems.
First that Cisco DPC3000 is a cable modem, not a ADSL modem. You probably don't need the DSL configuration that you had before.
when i connect the modem to my Airport Express (even though i have reset AE in order to clear the previous Speedy/Terra configuration), i get no internet in my home wireless network.
How did you "reset" the AE? How is it configured now? You probably need a setting of "Connect Using:" "Ethernet", rather than the "PPPoE" setting you may have had before.
If everything else looks good, it's common to have to reset a modem when switching what device is connected to it. Try powering down the modem for a few minutes. If it has a reset switch, press that.

Airport Express works with every device except base PC

Similar Messages

Maybe you are looking for