Airport Express +WPA2 Enterprise, no place to enter username and pass for auth...

Airport Express version 7.6
Airport Utility 5.5.3
I want to use the Airport Express simply to bridge an Ethernet connection to wireless using WPA 2 Enterprise (Wireless network uses RADIUS authentication)
Wireless mode is set to "Join a wireless network"
Wireless Security is set to "WPA/WPA2 Enterprise"
Problem is that there is no place that I can find to enter the username and password for the Enterprise security.
Thanks

Similar Messages

Enter username and password for "weblogic" at ..

We have a web service running on a single domain on a weblogic 7.0 SP1 cluster.
We load balance via a F5 in front of the cluster. Our F5 accepts SSL requests
on port XXX3, terminates SSL and forwards the non-SSL request to a managed server
in the cluster for processing. Likewise, the F5 receives HTTP requests on port
XXX0 and forwards the non-SSL request to a managed server in the cluster.
We have no Weblogic security features configured for the web service. Only the
standard "myrealm" is configured with the defaults values.
Whenever we call this web service, via the F5, on the XXXX ports, we are prompted
to authenticate. The message "Enter username and password for "weblogic" at <domain-name>"
appears. We don't even have a "weblogic" realm configured. (1) We are not sure
why we need to authenticate when no security has been configured for this application
(2) We've tried every username password combination we can think of and none work.
One clue is.... if we use the standard HTTP ports 80 and 443 for traffic coming
into the firewall, we are not prompted to authenticate. The web service works
just fine. The problem seems to rise when we use the non-standard ports on the
F5 of XXX0 and XXX3 and forward traffic from these ports to the managed servers.
Has anyone seen this behavior?
-Cassandra

In Firefox go to the tools menu - Add-ons - extensions then remove browse for change.

How to connect an apple tv to an enterprise network with a username and a password? I need to use it over my university's wifi. theres no option to enter username and password. how to connect the apple tv to such enterprise network?

How to connect an apple tv to an enterprise network with a username and a password?
I need to use it over my university's wifi. theres no option to enter username and password. how to connect the apple tv to such enterprise network?

Contact the University's IT dept, they may be able to set something up on the network to allow the ATV to connect without the need for a user name/password.

Why does my Airport Express say "self assigned IP address"? No IP address for the ethernet, and it is not connecting to my cable router any longer...

Why does my Airport Express say "self assigned IP address"? No IP address for the ethernet, and it is not connecting to my cable router any longer...

Some cable providers.....like mine, a well known company......seem to take anywhere from a few moments to sometimes up to 30 minutes to allow their equipment back at the cable company to fully reset and issue a new fresh connection.
So, it would not hurt to leave things powered down for 15-20 minutes or more when you perform the reset that John Galt suggests.

HT2497 do I connect my airport express to my modem via the WAN port and then connect to my imac via ethernet cable?

Do I connect my airport express to my modem via the WAN port and then connect from airport express to my imac with ethernet cable? Is that how you "hard wire" the connection? Because when I do that, I still can't get online. Thanks.

What is the make & model of your modem?
You pretty much stated the correct wiring. There should be an Ethernet cable connected between the modem and the WAN (circle of dots) port on the AirPort Express base station.
Anytime you change networking hardware it is always a good idea to perform a complete power recycle of that hardware. Check out the following AirPort User Tip for details. Please post back your results.

Does airport express need to be connected to Internet to use purely for AirPlay ?

Does airport express need to be connected to Internet to use purely for AirPlay ? Or can I just attach to my stereo and have my Mac connect directly to it in the absence of a wireless network? Tks

HKCV wrote:
can I just attach to my stereo and have my Mac connect directly to it in the absence of a wireless network?
you will have to configure the express to create a wireless network but you do not need a connection to the internet.

My internet continually disconnects. When I added my airport express, I had to call Verizon (my provider) and have them "bridge" my modem. Ever since, my connection constantly disconnects and puts up the message "Could not find a PPPoE server".

My internet continually disconnects. When I added my airport express, I had to call Verizon (my provider) and have them "bridge" my modem. Ever since, my connection constantly disconnects and puts up the message "Could not find a PPPoE server".
Any ideas? I probably have something wrong in my computer settings.

You should restore your modem to router condition and set the Airport Express to 'Bridge Mode'. A full explanation and the method of doing this is here:
http://www.wilmut.webspace.virginmedia.com/notes/airport.html

Why firefox wont ask me to enter my mail "Account details (UserName and Password)" for 2nd time, if i open same "mail account" using another session (1st session still "login")

I opened "yahoomail" in one new tab,mail page asks me to enter "UserName and Password" once typed my details, it allows me to see my mails.Again I opened "yahoomail" in new tab (Still my 1st yahoo mail account in "login" state) to check my other account,this time it automatically allows me to see the previously opened account without asking me to enetr "Account Details"

All Firefox windows and tabs run in the same "session". You can't open a 2nd account on the same server as the first account without being able to handle "session cookies" for each account.
Take a look at these three extensions which can handle multiple "cookie sessions", and pick one. 
Multifox: 
http://br.mozdev.org/multifox/ 
Cookie Swap extension: 
https://addons.mozilla.org/firefox/3255/ 
Cookie Pie extension: 
http://www.nektra.com/oss/firefox/extensions/cookiepie/

What is the default username and password for a Airport Time Capsule 3TB

What is the default username and password for a Airport Time Capsule 3TB

There is no default user name on any of the AirPort routers, but the default password is......
public

Hello How do I set up Firefox 8.0 so that It will Ask me if I want to save a Password for a website. At present I don't get an option every time I go into a website that I know is secure I have to enter username and password. I have been though tools etc.

Hello How do I set up Firefox 8.0 so that It will Ask me if I want to save a Password for a website. At present I don't get an option every time I go into a website that I know is secure I have to enter username and password. I have been though tools etc.
Thank you any help would be help full as every time I log into Face Book for example I have to provide all the Information and this is a pain
Cheers Alex

The website may be using autocomplete=off to prevent Firefox from saving the name and password.
You can remove autocomplete=off with a bookmarklet to make Firefox save the name and password.
*http://kb.mozillazine.org/User_name_and_password_not_remembered
*Saved Password Editor: https://addons.mozilla.org/firefox/addon/saved-password-editor/

Trying to backup from icloud. Enter username and password - OK. Select backup date - OK. I'm then presented with an old username that of course doesn't match my password. Now what?

Have a disabled iPad2 that's been wiped. Using current IOS system. Trying to backup from icloud. Enter username and password - OK. Select backup date - OK. I'm then presented with an old username that of course doesn't match my password. Now what?

Hi Bluehouse44,
If you are having difficulty restoring your iPad from an iCloud backup you may want to use the steps in this article to try to get back on track -
If you can't update or restore your iOS device
http://support.apple.com/kb/HT1808
Thanks for using Apple Support Communities.
Best,
Brett L

Can't get started with Airport Express; WPA2 problem?

Howdy,
I purchased an airport express about a month ago and am unable to get it set up, at all. My goal is what the setup guide calls "Using AirPort Express on an existing wireless network and stream music to powered speakers" (pg. 15 for those who have the book). The failure is that Airport Admin Utility doesn't recognize my third party wireless network.
My wireless hub is a linksys wireless-G cable gateway, and has been in use with multiple computers in the current setup for a couple years. It is setup with WPA2 personal, TKIP+AES encryption, and MAC access list enabled. SSID broadcast is currently enabled.
I am running OSX10.4.11 on the computer that I am using to attempt to configure this.
Following the instructions for "Connecting to an Existing Wireless Network" (pg 25), I am attempting to use Airport Utility. But there is no such program on my computer, so I am assuming that Airport Admin Utility is what the book refers to as Airport Utility. Airport Admin Utility presents a "window titled Select Base Station" but lists no base stations. I click "Other", provide the IP address and password, hit OK, and ... nothing happens. After 20 seconds the beachball appears, and after another 20 seconds it says "The airport admin utility was unable to read the configuration of the selected base station".
The IP address I used is the one that I enter into the web browser to access the linksys box (no secret here, 192.168.0.1). The password is the one used to access those settings (e.g., the linksys default is "admin", but I changed it). I know the IP address and password are correct, but I do not know if this is the IP address and password the program is asking for. I don't even know if I am running the correct program!
Thanks for any help,
Bob H

Actually, I have it working now.
What I did after posting my last message was I connected the AE to my wireless hub, via ethernet cable. Then Airport Utility was able to find it, initialize it, and load new firmware into it ("it" being the AE). During initialization stage I told it it would be connecting wirelessly to an existing wireless network, and I gave it the network name, security options and password.
Then I told the wireless hub to allow this device (MAC address = Airport ID), disconnected the ethernet cable, power-cycled the wireless hub, and relaunched Airport Utility. It saw the AE, so I quit that. Then I launched iTunes and selected my AE as the speakers. It told me I needed to enable iTunes Music Sharing in my firewall. After doing that, iTunes is now playing through my external speakers. Exactly what I want.
Now I just need to go set this up on my laptop, with the AE and speakers on the other side of the house where I want 'em.
As a recap, I think I basically had two problems, both related to documentation. First, the program that the Setup Guide tells me to use wasn't in my Tiger applications folder, and I was fooled by a program with a similar name (in the past I have seen such name changes between what the setup guide said I should use and what I really needed to use). Second, it wasn't clear to me that, regardless of how I wanted to configure things for usage, I needed to establish a valid wired connection to the AE to initialize it. I think that could be made clearer in the book.
Thanks for everyone's help.
Bob H

Airport Express (Model with 802.11G +54MBPS Mac/PC and Set Up Issues

Hi,
We have a 4 Mac and 1 PC Household. Cable Internet Service by Roadrunner.Cable model (owned) connected to a D-Link 802.11G wi fi router (by ethernet from cable modem)in the family room , then out to a Imac (the half moon base and LCD screen with a airport card also in the family room and the closet computer to the D-Link
router, (we did add a D-Link antenna to the router ? about 10 months ago (a D-Link ANT24-0700 (Version 1.2)and a HP 4 in 1 printer attached via USB to the Imac
,a eMac 1.25 ghz 1Gb ram with airpot card also connected wirelessly (no printer attached on the same floor but in a ajoinging room about 20 feet from the Router, and another eMac 1.0 Ghz 1Gb ram with airport card in the upstairs part of our house (a bedroom) and no issue with Internet connection (it has a Epson 3in 1 printer attached via USB, and a MacBook Pro with 802.11N wireless card in side , bought for a Christmas/Birthday Present and also for college.It to has no issues with the Internet where ever it may be in the house. Our sole PC a HP tower with a added D-Link WDA -2320 Range Booster Desktop Adapter (802.11G) and we added a D-Link Antenna same model as the other a ANT24-0700 to help with Internet access which it did as well as adding some ram to increase page loading time etc. It does not have a printer attached. I will get to the Topic Area now
The Airport Express. I was not involved in the set-up as I was laid up due to a bad back and post major knee surgery , But I always (especially recently) wondered why the light was amber and blinking. I read through the manual and also
Apple.com support and MacFixit.com (which is under construction and moved to part of Cnet.com)and then went to the Airport Express Discussion area (sorry for being so wordy) I need a Twitter account to post!) We have a network name for the D-Link and the computers all were added and it also supports a Xbox 360, a Sony PlayStation 3 and a Nintendo Wi (in online use without issue) but..
A network was also as it appears to myself) for the Airport Express and under the half moon bars showing connection strenght (there is our D-Link network "phoenix" with security protection WPA2 I believe) as I have set up the router, We had a Apple Base station prior that was ? 802.11B (a half moon white unit) still have it in the box ) So for normal daily use, checking e-mail and internet use all of the computers use the "phoenix" or D-Link supported Router 802.11G
and The other network calld Apple Network with numbers and letters after it (and hopefully security) password is unknown , The Airport Express is set up connected via USB to a HP B&W laser printer which has saved quite a bit of money on ink, To utilize that printer you must switch from "phoenix" The D-Link router network to the Apple Network (followed by letters and numbers) The Imac and the eMac in the family room and a ajoing room (after switching to the Apple Network
can than print to the lasr printer. The eMac upstairs and the HP Windows XP Professional software can not print to the laser printer (yet the HP PC shows it as a individual network and a strong signal, equal to the Internet connection from the D-Link, and the eMac (after switching under the half moon (not the proper name I am sure) to get to the Apple Network to print , it will not print, yet it shows a 5 bar signal, same as the D-Link connection. I do believe we have two seperate networks (but do not understand why the two Mac's in the family room can print to the laser printer by simply switching networks and then file and print. ** One other 9probaly major item is that it states to set up the Airport Express with a Mac With OSX 10.4 or later (at the time of set up, we had the Imac and two eMac's all running Panther OSX 10.3.9 9which they continue to have installed) We obtained the HP Tower and Monitor and HP 4in 1 printer ust before Christmas in 2008 and the MacBook Pro in Mid December 2009 (current model and running Snow Leopard 10.6. The HP Tower runs Windows Xp Professional (Service Pack 3) so the MacBook Pro which is much more mobile , could be used to do the set-up, or the HP Tower coulf be moved temprarily, I do recall if Router changes (at least with The D-Link You need to be connected by Ethernet to the Mac
that would be doing the set up/configuration of the router (and it runs OSX 10.3.9 and is a older Mac (with 80Gb Hard drive that is partioned for OS9 and OSX as well , it is under a Ghz processor wise and less than 1 Gb of ram as the last ram slot required a seal to be broken and 256mb of ram (?) could be added
it has 768 mb of ram but knock on wood running well. We use Lacie external drives
on the Imac and both eMac's and need to get external drives for the HP PC as well as the Mac Book Pro (15" screen)
I apoogize if I repeated myself, and rambled but I wanted to (in one post) to explain our set up and network configuration
Questions
1) if indeed it is that the two networks is true and a set yp that is not correct
can the Airport Express be configured without opening up the router (when ever that happens it seems one computer is unable to get online and each time its a differnt one a Mac or veen the PC
The PC under My Computer and Networks clearly shows the wto distinct and seperate netwoks with strong signals and the distance is not far (it is through a floor as the other emac and the PC are upstairs and cabling by ethernet is not a option
2) If I need to open the router would I add the Airport Express as a client as if it was one of the computers or gaming systems on the network? (adding the Mac adress or IP address (not sure how you find the Mac address) and its been while since the router was opened up for any additions or work on it.
3) would it be on the same channel as the router or not ?
4) Hopefully with proper configuration the light will stay on (and green) on the A/E and the eMac and HP PC will be able to print to the laser printer. Currentlt
when anything needs printed from the PC its put on a Flasg Drive and plugged in tothe Imac and the the Apple Network is selected and data printed, The eMac upstairs has the option of using the attached Epson 3 in one or doing the Flash stick work around.
I would be verya appreciative if some one took a look at the set up above and advised me of what is right, what is not right* and what to do to fix things up
I would imagine after proper set up, delete the Apple Network from the PC and eMac upstairs and ? all of the computers as we should have one base station (the D-link and the spoke (the A/E connected by UBS to the A/E (it may be ethernet but the cable connection from the A/E to the HP laser printer is correct (the rest of the A/E set up ... Please , tell me where it is and where it should be
and ? any idea why we can print to the laser printer down stairs and not up stairs ? it did mention printer set up with Panther as possible, page 43 of themanual we have un chaper 5 Tips and Troubleshooting (under whn your printer isn't responding) (we do not have the interfereance listed in the manual,
our phones are land line, one 900 mghz and the others 5.8 ghz
It is possible to move the A/E and laser printer if that would help the two computers (desktops) upstairs) bt the distance is way less than 150 but their is a floor and ? duct work (metal ) but I think here is a place to stop typing and let some of the experts on the discussion forums take a look.
one lst note (as the lap top will be going off to college in the fall (runnning Snow Leopard, and the other 3 Mac's run Panther OSX 10.3.9 should the HP PC windows Xp Professional be the computer to set up the air port express and the Airport Utility proram installed & would this conflict with the current Router (set up by a Macc running OSX 10.3.9 (Panther) i.e (should both set ups be on the same computer?) but actually aThe D-Link is OSX10.3.9 compatible (and 802.11G) and set up requires ethernet connection to a Mac (You type in the numbers and . etc and password as administror and you are in, or should the admin be on the same cpmpuer for the router and A/E ?
(and considering a Airport Extreme Base Station as well as dual frequency simulataneus and 802.11N (for the laptop now) and future, or wait. The 802.11
in theory would broadcast farther..?? even if computers had 802.11b(our Mac Desk tops and the PC 802.11B card
Thanks Again!!!
Many, Many Thanks
amnienttales

William Boyd Jr.
Hello again,
D-Link Router is model DGL-4300 (along with a D-Link ANT24-0700 Omnidirectional
7dbi Antenna . Our Cable Internet ISP (Roadrunner) provides consumers with dynamic ISP address's . All Mac's have Airport Cards and The Hp Tower XW4550 has a D-Link Rangebooster G Desktop Adapter WDA-2320 (also with a D-Link ANT24-0700 Omnidirectional 7 dbi Antenna (the PC OS is Win XP Pro Service Pack 3) The 3 desktop Mac's run OSX Panther 10.3.9 , The 15" MacBook Pro OS is OSX 10.6 Snow
Leopard (not sure what is after the .6 (right now) D-Link's website is
http://www.dlink.com , I have configured this router multiple times in the past.
also added as clients on the network (Utilizing the D-Link Router) are a X-Box 360, Sony Play Station PS3, and a Nintendo Wii all of which have on line ability
and enables online video game play with any one online.
As mentioned prior the Airport Port Express is Model A1084 Part No. M9447OLL/A
which is USB conected to a HP LaseJet B&W , model 1020 and some how the two computers near it can switch to the Airport Express Network from the D-Link Router based Network and print wirelessly to the A/E connected LaserJetPrinter
I realize I will need to reconfigure the D-Link Router and add the A/E as a client. I will try first to use the Airport Utility and see if I can do anything
Utilizing it (adding it to the D-Link network, I think its unlikely but worth a try but* the password is unknown but I have a few guess's as to what it may be.
I do have the necessary admin and network paswwords to cconfigure the D-Link Router,
1) * If the the A/E Utility experiment fails and I need to re-configure the router * do I need to (as per the Airport Express Set Up Guide (Use a Mac with OSX 10.4 or later or a PC with Win Xp Home or Professional (have a desk top PC that has the specs) and The Mac Book Pro meets the Mac Spec's)
If I can not get a password to work on the A/E I would reset it using the reset button
And before plugging in the A/E , connect the appropraite cables in our case a USB cable to the LaserJet Printer then plug in the A/E
2) I would then connect by Ethernet from Either the Mac Laptop or The PC to the D-Link router (if not the router will not set-up correctly)
3) The one question that puzzles me is that we are not using the A/E as a base
but a client
in two sections(Using Airport Express , connecting a Printer via USB
and use Airprt Utility to create a new network or join a new newWireless computers using Mac OSX 10.2.7 (Tiger) or later or a PC with Windows XP and it then goes in to the steps of ising the printer for both a Mac and a PC (using Bonjour on the CD that came with the A/E (this appears to contradict needing to use Mac OSx 10.4 or a PC with Win Xp set the A/E up for use as a printer
(joiing a new network or existig one)
And in Chapter 5 Tips and Roubleshooting= Your Airport Express Status Light Flashes amber & Your Printer is not responding (it is flashing amber and the printer does not respond to the two computers upsstairs (one Mac running OSX 10.3.9 & One PC running WinXp and its states to make sure the printer is selected
in the Printer list o client computers, to do this on a Mac using OSX 10.3 or later , open Printer Set Up Utility and follow steps and if a PC with Windows XP , Open Printers and faxes and then follow steps
in Closing ? can I configure the A/E Utility with a Mac using 10.3.9 as above or
? Per Chapter 1 Getting Started use a Mac with OSX 10.4 or later or a PC with Windows Xp Home or Professional
Perhaps I am taking the tips and trouble shooting and Printer Set up out of context or does the getting Started Computer specs contradict them or are they
for use if the A/E was going to be a Base Station and not a client..
Will keep at it,
ambienttales

How to setup ADSL moden router and Airport Express 802.11n (1st Generation) to provide internet and airplay connections to multiple devices?

I have a Netgear wireless ADSL modem router (wireless + four ethernet out ports) that i'd like to connect to a 1st gen Airport Express to create a small home network to provide internet access for a MacBook, iPhone and Apple TV, and to provide Airplay connection to the Apple TV and Airport Express audio output jack.
I'd like to turn off the wireless function of the ADSL modem router, and to have from one of its ethernet out ports an ethernet cable providing internet directly connected to my MacBooks ethernet port.
Then from one of the other ethernet outs on the ADSL modem router an ethernet cable connected to the Airport Express's ethernet port. This would be to provide wireless internet connection for the Apple TV and iPhone via WiFi from the AE.
At the same time as the MacBook is receviing internet soley via the ethernet in port, i'd like it to have WiFi connection to the AE to provide Airplay connection to the Apple TV and the AE's audio out jack.
Is this all possible? How should I go about to configure this? How should the AE's ethernet port be configured?
Any special modes the ADSL modem router or Airport Express should be in? ie bridge or client?
Thanks

On the ADSL modem router web-based interface, should I set any security setting? I think not as there'll be no wireless signal coming from it, only wired ethernet connections to both MacBook and AE. Security should only be set on the AE to prevent someone from accessing its WiFi signal. Is this assumption correct?
These are all correct!
How should I go about setting up security for this network?
First I would recommend that you configure the AirPort Express for WPA2 Personal. This will provide you with the greastest level of security while still providing excellent bandwidth performance.
You would configure wireless security for the Express by using the AirPort Utility on a Mac, PC, or iOS device. Using your MacBook Pro as an example, you would do so as follows:
Run the AirPort Utility.
Select the Express, and then, click on Edit.
Select the Wireless tab to enable it.
Set the Wireless Security option to: WPA2 Personal
Enter the desired password in both the Wireless Password & Verify Password fields. Note: Use of a "strong" password is encourage here. By strong, I mean use a mix of upper/lowercase letters, numbers, & punctuation marks. Try not to use common dictionary words. If you operate your wireless in an area where security is of an utmost concern, I would further suggest that you change the wireless security password every 60-90 days. Also don't forget to change the default AirPort Base Station Administrator password as well.
Click on Update and allow the Express to restart.

Can Airport Express / Computer be set up to steam music and go online at the same time?

I can only connect my MacBook to one device (wireless modum and airport extreme) at a time. I have gotten a few error messages during setup that make me wonder if it is the "refurb" device that is bad. I get error messages when I try to set it up wirelessly. Or do I need the extreme to do what I want? I installed all updates it asked for as well.

Yes, both can be done simultaneously. You just need to reconfigure the AirPort Express Base Station (AX) to "join" the wireless network provided by the other wireless router.
AirPort Express Base Station (AX) - iTunes Setup
Either connect to the AX's wireless network or connect directly, using an Ethernet cable, to the Ethernet port of the AX, and then using the AirPort Utility in "Manual Setup" mode, make the following changes:
AirPort Utility > Select the AX > Manual Setup > AirPort > Wireless
Wireless Mode: Join a wireless network
Network Name: <existing wireless network>
Wireless Security: <select the encryption type of the existing wireless network>
Wireless Password: <enter the existing wireless network password>
Verify Password: <re-enter the existing wireless network password>
AirPort Utility > Select the AX > Manual Setup >Music
Enable AirTunes (checked)
iTunes Speaker Name: <enter desired speaker name>
iTunes Speaker Password: (optional)
Verify Password: (optional)
Click Update to write the new settings to the AX

Airport Express +WPA2 Enterprise, no place to enter username and pass for auth...

Similar Messages

Maybe you are looking for