Airport expresss as extender in windows network

I have a Netgear 11g router hooked up to a Dell desktop (win XP). Two powerbooks are connected wirelessly - a happy network. I got an airport express and set it up with a powerbook to stream music to my stereo. It works fine.
I decided that I would like change things and use airport express as an extender to fill in wireless dead spots. I'm not sure exactly how to implement this. I tried to reprogram it with the powerbook and I still get a nice green light, but it doesn't help the wireless coverage. I'm thinking I need to do something with my network on the Dell, but not sure where to start.
Thanks for any help.

Thanks much. You saved me a lot of heartache.
I bought my Netgear router two years ago cheap from Amazon. Don't know if replacing it with a newer 11g router would get me through those walls or not. I've read about the new MIMO standard, but I'm not clear if the powerbooks would benefit without adding MIMO cards. The picture seems a little muddy.

Similar Messages

Tried to use my two airport express to extend my wifi network on a windows pc but no success

Tried to use my two airport express to extend my wifi network on a windows pc but no success

My two airport express base stations are 802.11n and i am triying to use them extend my wireless network which is using a D link wirless router as supplied my my ISP connected to TalkTalk network.
Unless the D-Link wireless router has Ethernet ports for each of the 802.11n AirPort Express Base Stations (AXn) to connect to, they will NOT be able to extend the wireless range of the D-Link.
Instead, when directly connected and reconfigured for a roaming network, these base stations CAN extend the range.
Please check out this Apple Support article on how to use AirPorts to extend a wireless network.
The key is to have both AXns configured as follows:
As a bridge.
Each having a unique Base Station Name.
Both using the same Network Name (or SSID), wireless security type and password as the D-Link.
Each AXn to use a channel at least 3-5 channels apart both from each other and that of the D-Link.

I did set up my Airport Express to extend my existing network. It did ok but I can't see the name assigned to the Airport Express name in my available networks. Is that normal?

I did set up my Airport Express to extend my existing network. It did ok but I can't see the name assigned to the Airport Express name in my available networks. Is that normal?

If the AirPort Express is extending your network it is using the same wireless network name as your "main" router.
Your main router and the Express act like one "big" network now.
Your computer will connect to either the main router or the Express automatically....depending on where it sees the best signal.

Using Airport Express to extend my wireless network

I recently purchased a Time Capsule but found that I could not see the wireless signal from my bedroom. To solve this I purchased an Airport Express to extend the range. I plugged the AE into an outlet in my bed room and set it up to join my existing network. Everything looked fine from the point of view of the Airport Utility. Unfortunately my iPod Touch still can not see my wireless network from my bedroom. I new iPad can see it but the signal is very weak, even when I hold it right next to the AE. Is there a setting I missed?

Rick, welcome to the discussion area!
I plugged the AE into an outlet in my bed room and set it up to join my existing network.
You need to configure the AirPort Express to "Extend a wireless network". The AX does not provide any additional wireless coverage when it is set to "join".
First, you need to check a setting on your Time Capsule as follows:
AirPort Utility > Manual Setup > Wireless tab (below the icons)
Make sure there is a check mark next to "Allow this network to be extended"
Update to save any changes
On the AirPort Express move it close to the Time Capsule for configuration:
AirPort Utility > Manual Setup > Wireless tab
Wireless Mode = Extend a wireless network" (Hold down the option key on your Mac if you do not see this choice appear when you click the selection box).
Wireless Network Name = Same name as your Time Capsule Network
Check mark next to "Allow wireless clients"
Security = Same setting as your Time Capsule
Password = Same password as your Time Capsule
Confirm Password
Update to save settings
The AirPort Express can only "extend" what it "receives". Most users position it too far away from the main router and consequently, the Express extends a weak signal. Try a location that is about 1/2 to 2/3 the distance between the Time Capsule and the area that needs move coverage. Then experiment a bit to find the best signal.
Post back on your results.

HT4259 i connected two airport extremes by extending a wifi network. wifi seems weak...help

i connected two airport extremes by extending a wifi network. all my lights are green, and airport utility confirms connections are excellent. but the extended base station hasn't improved my wifi range in the area i set it up in.

If you have a Mac laptop handy, run the test that I have outlined below to find out if the remote AirPort Extreme is really extending the signal at all.
Here, I assume that both of your AirPort Extremes are the newer "square" versions....not the older "round" version.
Locate your Mac laptop close to the "main" AirPort Extreme
Hold down the option key on the Mac while you click on the fan shaped AirPort icon at the top of the screen
Look for the BSSID and jot down the last few characters
The BSSID is the AirPort ID of the AirPort Extreme
Now, move the laptop close the "remote" AirPort Extreme and perform the same test
If you see the same BSSID as the "main" AirPort Extreme, your Mac is picking up from the main AirPort...and the remote AirPort is not configured correctly to extend.
If you see a different BSSID near the remote AirPort, that indicates that the Mac is picking up a signal from the remote AirPort....which is exending the signal correctly.

How do i use the airport extreme to extend my wireless network

How do i connected my airport extreme up to my existing network so that it can extend my wireless through out the house ??
Can it be done wirelessly or do i need an ethernet cable thats about 10m ?
Keith

The AirPort Exteme can "extend" your existing wireless network (using wireless only) if it is being provided by another Apple router.
If your current main router is not an Apple product, then you will need to plan to connect the AirPort Extreme to your router using an Ethernet cable.
Post back for more information if needed.

How do I use Airport Express to extend my current network.

I am now using an Airport Extreme and want to use my old Airport Express to extend my network. How do I do this? Thanks!

Linc44, welcome to the discussions!
I am now using an Airport Extreme and want to use my old Airport Express to extend my network. How do I do this?
By "old AirPort Express", I take it that you have a "b/g" version of the device, which is model number A 1084. Is that correct?

How do I use airport express to extend my wireless network?

How vcan I extend the range of my wireless network using Airport Express?

It appears that you may have "join a wireless network" and "extend a wireless network" mixed up a bit.
The Express can "join" virtually any wireless network produced by any manufacturer's router if it is provided with the correct settings:
name of the wireless network
the correct wireless security settings
and correct password.
"Join" is normally used for AirTunes or to connect a USB printer to the Express for remote printing.
But, the Express does not provide any additional wirless coverage when it "joins" another wireless network.
Apple's "Extend a wireless network" feature, which was introduced about 5 years ago, allows the Express to connect to another Apple "n" wireless router and then "repeat" or "extend" the wireless signal....providing more wireless coverage in the area where the Express is located.
This is a proprietary setting. Apple says it will not work with devices from other manufacturers. To our knowledge, this is correct.
Prior to 2007, Apple used a setting called WDS to allow the Express to be configured to provide more wireless coverage. Attempts were made by a number of manufacturers to standardize the WDS settings, but things were never finalized.
The result is that Apple's older "b/g" routers were sometimes compatible with WDS settings from another manufacturer. There were a handful of products....5 or 6, as I recall....that were said to work. Some did, some didn't. Linksys had a couple of models, Netgear had one, SMC another, etc. Extremely limited.
Since WDS was never adopted as an industry standard, manufacturers developed their own WDS settings. Compatibility was extemely limited and unreliable. That continues to this day with WDS.
Bottom line....It is always best to stick with the same manufacturer throughout your network as far as routing is concerned.
If you have an newer "n" Apple router like an AirPort Extreme, the Express can extend the wireless as can along Extreme. If your Extreme is dual band, and you want to extend both bands, then you need another Extreme.
Another responder suggested to someone that they could connect the AirPort Express to a router via Ethernet. What exactly would that achieve?
That is a completely different subject since this discussion is about extending a wireless network using wireless only.

Can I use my airport express to extend a wireless network with a non-apple router?

I have been trying to extend my wireless network in my house. Right now I have a dsl modem/router provided by Century Link and an older AirPort express (not sure how old but it uses AirPort utility v5.6). I want to be able to share my printer and use AirTunes. Currently I have the AirPort plugged into the router and setup to create a new wireless network. I would like to combine them so I don't have to switch between to print and play music. I am not really sure where to start or if it even possible. Any info would be great!

If you keep the Express connected using Ethernet and configure the Express to "Create a wireless network" using exactly the same wireless network name, exact same wireless security and same wireless password as the Century Link network.....everything will behave as one "big" network, and you will have additional wireless coverage near the Express.
If you do not need extra wireless coverage, you can turn off the wireless on the Express.
The Express must be in Bridge Mode.
Most users know the name of their wireless network and password, so the really tricky part of doing this is that you must know exactly what type of wireless security settings the Century Link router is using....and then match up the same settings on the AirPort Express.
If the settings do not match up exactly, then you wind up with two separate networks that will each require their own log on.
If you can check the setting for wireless security on the Century Link router and provide that information to us, we can tell you how to set things up the way that you would like.

HT4259 Trying to set up airport express to extend my wireless network. Primary base station is a time capsule. Even when I plug in the airport express to mac it cannot find it.

Trying to set up airport express to extend my Wi-Fi network. Primary base station is a time capsule. Tried searching for airport express using Wi-Fi status, no luck. Even tried plugging airport express into iMac, still no luck. Airport express showing solid amber light. Thanks for any help.

Airport express showing solid amber light
Unfortunately, this can mean one of two things:
1) The Express is locked up and will need a Factory Default Reset procedure to try to return the device back to its original default settings so that it can be reconfigured again.
2) The Express is defective. If you cannot get the Express back to a slow, blinking amber light after a Factory Default Reset, the Express will need to be replaced.
Try the Factory Default Reset a few times and report back on your progress.
Resetting an AirPort Base Station or Time Capsule FAQ

Using Airport Express to Extend a wired network using Belkin N Router

I have an ethernet/wired network in my home office and am using the Belkin N Router which is connected to the upstairs by ethernet also. I have a wireless network that the Belkin router uses to let me connect to the internet wirelessly if needed and I use it for my MacBook Pro inside the house but can't outside [the Belkin is connected to cablemodem].
I am trying to use my Airport Express to 'extend' the network from my home office out to my back deck by having it wirelessly be available [it is connected to main router/cable by ethernet/wired]. I have 5 bars on the Belkin Router wireless signal but very low unreliable bars from the Airport - either because it is not relaying the wirelss network of the Belkin router or it's not able to send its wifi signal from its ehternet/wired connection to the main router/cable modem, not sure which --
Short of pulling an ethernet wire outside to the back deck or getting an antenna to hang on my MacBookPro to better receive the home office wireless signal, is there a way to set up the AX soit can become an internet transmitter wirelessly of the wired network it is hooked to???
I read http://docs.info.apple.com/article.html?artnum=108040
but that didn't seem to help == and it appears the AX won't extend a non Apple wireless signal and I don't have one [tried the Extreme but it didn't work = the Belkin has been perfect = I can wirelessly connect in the room above the home office but would love to be able to use the AX to extend its power or at least use the wired linkage to then extend the power wirelessly....

Hey
in the following thread one of those top users posted a list of wireless routers AEXP is able to extend wireless network with via WDS
http://discussions.apple.com/thread.jspa?threadID=1492474&tstart=195
maybe that belkin is your modell?
and here:
http://ryanschwartz.net/2004/08/05/airtunes-airport-express-and-the-wrt54g
also here:
http://www.beatnikpad.com/archives/2004/10/19/airportexpresswds
are descriptions of how to connect to 3rd party routers (not belkin but the way to connect of both is quite similar so it might possiby help you too.
Not using wep, wpa/ wpa2 during installation and connecting the AEXP to Mac or Lan Port of your router should help.

I have a DLINK 524 150 and bought recently an airport express to extend my WIFI network. I tried by many ways to get the connection but it was impossibble. If possible, what is the necessary setup and orientation I have to follow ?

In have a DLINK 524 and bought recently (march/2013) an airport express to extend my WI-Fi network. I triedmany ways to get the connection but it was impossible. Is really possible to get this connection ? If it is, what is the necessary setup and orientations that I have to follow ?
Thanks

Apple designed their "extend" feature as a proprietary function to work with other Apple routers, so it's extremely unlikely that the AirPort Express would be able to wirelessly extend your D-Link network.
If you can connect the AirPort Express to the D-Link router using a wired Ethernet connection, the Express can likely be configured to provide more wireless coverage that way.

If I add an airport express to extend my wifi network, will I lose some of the bandwidth?

I currently have an Airport Extreme, which does a great job, however we are losing some signal at the top of the house. If I add an airport express to the middle floor, will it half the current download speed we are getting, but provide a stronger signal, or does it replicate the same speed?

Adding another base station to extend the wireless network does not directly affect your the download speed provided by your ISP. It will; however, use up some of the overall bandwidth of your wireless network for maintaining that extended network.
When extending a base station will only repeat the bandwidth at which it receives it. That's why it is important to properly place this base station for best overalll bandwidth performance. Please check out the following AirPort User Tip for details.

Why can't one of my Airport express stations extend my wireless network?

Background:
I have an Airport Extreme cabled to my Comcast router.
I have three Airport Express units scattered around my house.
All have worked fine for many months and all are running version 7.6.4.
Problem:
Recently, one of the Airport Express stations had a yellow, flashing LED and a status of "Extended Network - This Airport base station was unable to extend the wireless network..."
Using Airport Utility, this station displays a connection quality status of "good."
This unit also has the exact same settings as my other two Airport Express units.
Using Airport Utility I instructed the unit to "Ignore" the status, and the LED turned green. But the status of "Extended Network" continues to display.
I've tried a hard reboot of the unit, but nothing changed.
Any suggestions as to how to correct this status?

Thanks for the suggestion, but apparently the culprit was my Airport Extreme.
I swapped the locations of two of my Airport Expresses and the problem replicated. Both had the "Extended Network" status and both showed a red number 1, indicating that a firmware upgrade was available (but no update button appeared). I returned the two Expresses to their original locations. Same situation after they booted.
Then I performed a hard reset of my Airport Extreme. After the reset, all three Airport Expresses now have no special status messages in Airport Utility and all have a connection of "good" or "excellent." Plus, no red number 1's appear (which should only appear if a firmware update was available).
So, problem solved.

Use airport extreme to extend time capsule network

I have tc and an airport extreme. I want to use the airport extreme to extend my network and because I can use it to connect my directv receiver directly by ethernet. How do I set up the second router to act as an extension?

Won't using WDS (which is harder to set up) prevent use of 802.11n mode? It's my understanding that WDS is limited to 802.11b/g modes. This would be obviated by simply using the AEBS to extend the existing network and configuring the TC to be extended, correct?
I don't know. I have 1 802.11n Airport Extreme and a Snow 802.11b/g Airport Extreme and an 802.11b/g Airport Express.
I have only experimented with WDS between the Snow and Express so I can not speak about 802.11n.
However, if the Time Capsule and Airport Extreme are still supporting 802.11b/g then they must operate in the 2.4GHz frequence range. This will limit 802.11n performance. This is why I use my 802.11n Airport Extreme in 5GHz ONLY mode servicing just the 802.11n devices, and I use the older Snow and Express in Bridge mode to support my 802.11b/g devices using the 2.4GHz frequences.
The only way I know to properly extend an 802.11n network is to create a *Roaming WiFi Network*. This involves running an ethernet cable from the Time Capsule to the Airport Extreme. Then configure the Airport Extreme and Time Capsule so they have identical SSID, WiFi encryption method, and password. In addition, the Airport Extreme -> Internet -> Internet Connection tab must have "Connection Sharing:" set to "Off (Bridge Mode)" so that the Time Capsule provides all the routing services and there is only 1 subnet in the home.
Of course I'm willing to learn new tricks, so if there is a way to wirelessly extend the 802.11n network and stay in the 5GHz frequences, I am interested, as you never know, some day I will most likely own another 802.11n base station.

Airport expresss as extender in windows network

Similar Messages

Maybe you are looking for