Airport Exterme 802.11n Wi-Fi MC340LL/A not sure about some settings ?

Yesterday I bought a Airport Extreme ( Base Station ) 802.11n Wi-Fi MC340LL/A ( Model No. A1354 )
I have managed to figure out most of the setting in the Airport Utility ( Setup Guide that came with the Airport Extreme is No help with details about any settings except the Very Basic ones ) and My wireless network is setup and working but May need tweaking for even better performance.
But there are some settings/choices I'm not familiar with and Not quite sure what options I need and don't need.
My Network - No Network Disk Connected, Guest Network or Files being Shared
( at least not for now )
Connected through wireless access - ( WPA2 Personal Security )
MacBook 2.26GHz Intel Core 2 Duo (13-inch, Late 2009) –
Model A1342 Polycarbonate Unibody ( MC207LL/A )
OS X Snow Leopard 10.6.4
Roku digital streaming video player (also known as the Netflix Player by Roku)
HP Photosmart Plus B209a-m Wireless Printer
Connected Via Ethernet -
Dell OptiPlex Desktop PC
Windows XP Professional SP3
First Setting I'm not sure of - Internet Connection - Connection Sharing
For now I have it set to Share Public IP address - Is this correct for my Network Setup with The Airport Extreme being the only router being used ?
Other two choices are Distribute A Range of IP Addresses and ( Off ) Bridge Mode
[IMG]http://i134.photobucket.com/albums/q100/Blueimac/Screenshot2010-07-30at25653PM.j pg[/IMG]
Next Setting - Wireless - Wireless Network Options ( Very Confusing )
Settings I have Enabled
[IMG]http://i134.photobucket.com/albums/q100/Blueimac/Screenshot2010-07-30at35722PM.j pg[/IMG]
I've read online about Multicast Rate, Use Wide Channels and Use Interference Robustness but still not sure how I should use these setting and at what level.

+For now I have it set to Share Public IP address - Is this correct for my Network Setup with The Airport Extreme being the only router being used ?+
This would be the correct setting if the AirPort Extreme is connected to a simple modem (one ethernet port).
*Settings I have Enabled*
5 GHz name indicates that you have elected to use the option to assign a separate name to the 5 GHz network. This will allow you to "tell" compatible computers to connect to that network, rather than the slower 2.4 GHz network
Use Wide Channels is recommended for 5 GHz operation.
Interference Robustness often does more harm than good and should not be used unless you know you are in a area with a lot of wireless networks and you feel that your network is experiencing interference issues from a nearby network.

Similar Messages

Installed new Airport Extreme 802.11n and now AOL will not accept

my outbound mail. I can get it to work about one time in 10. All settings have stayed the same with the only variable being the new router. Any thoughts?
iMac 24 duo Mac OS X (10.4.8) Airport Extreme 802.11n

Hello, and welcome to the Discussions.
Are you using the smtp provided by AOL? What port are you presenting it on -- Port 25 or Port 587? In Mail Preferences/Accounts/Account Infomation/Outgoing Server Settings, does the name of the (if the one from AOL) include your Username from your AOL email address (also referred to as account name, by AOL, I think)?
Ernie

Unable to Connect Using New AirPort Express 802.11n

My mom purchased an AirPort Express 802.11n wireless router (AX) and I, as the designated "technology guru", was tasked with setting it up. Unfortunately, I am having problems out of the box.
When I connect it to the wall, it is found by AirPort Utility, but when I try to set it up, it is unable to connect to the wireless network. ("An error occurred joining the selected wireless network." "An error occurred, close the configuration window and try again.") This is annoying because I have an older AX and it was true to the "it just works" Apple mantra. It is also annoying because the error message has a comma splice.
Feeling pretty proud of my "technology guru" title, I come here to see what I could be doing wrong. I try connecting the computer directly to the router via ethernet cable. With this, I am able to setup my wireless network. I am still not able to connect to it. Additionally, once the AX has been configured, the AirPort Utility can't find it.
I tried updating firmware to 7.5.2. I've tried downgrading to 7.3.2. I've tried hard resets, soft resets. Every tip I could find I have tried. Please help. My self-confidence is wearing out.
Is it time for a call to Apple or a visit to the Apple Store?

Are you trying to configure the Express to "join" the wireless network?
If yes, the message you are receiving is likely an indication that you do not have the correct security settings selected for the Express. Unless the security settings between the wireless router and Express match up exactly, the Express will display the error that "an error occurred, etc".
The easiest way to confirm if you have this problem is temporarily set the main wireless router to "no security" and try to connect the Express that way. If you can connect, then you know that it is a security issue.
Please tell us the exact setting for security that the wireless router there is using and we'll try to give you some more ideas.
The Express will connect. It's just a matter of finding the right settings.
Message was edited by: Bob Timmons

How do I connect my Airport Extreme 802.11n to Epson 645 Printer?

I can't figure out how to connect my Airport Extreme 802.11n to my Epson 645 Printer. Can anyone help me? Thanks!

You may want to try reinstalling Mavericks. Airport Utility installed by Mavericks may no longer connect to your older AEBS (though I've not heard that.) Installing the Old AirPort Utility (Version 5.6) on Mountain Lion | frank.is.
Reinstall Lion, Mountain Lion, or Mavericks
     Boot to the Recovery HD: Restart the computer and after the chime press and hold down the
     COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the computer and
     after the chime press and hold down the OPTION key until the boot manager screen appears.
     Select the Recovery HD and click on the downward pointing arrow button.
     Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu.
     Repair the Hard Drive and Permissions as follows.
After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
     Reinstall Lion/Mountain Lion, Mavericks: Select ReinstallLion/Mountain Lion, Mavericks from
     the Utilities menu, and click on the Continue button.
     Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is
                three times faster than wireless.

Setting up Time Capsule with existing AirPort Extreme 802.11n and AirPort Express.

I already have and am using an AirPort Extreme 802.11n with an AirPort Express. I want to set up a Time Capsule 802.11n. Which is the best way to configure this?

... Which is the best way to configure this?
The answer depends on what you need the TC to accomplish. If all you need it to do is perform Time Machine backups, simply have it join your existing network in client mode. It would be if it were to connect to your existing router (presumably your Extreme), not through an "extended" wireless network (presumably your Express).
If you need the TC to "extend" your network so as to serve additional wireless clients, you can do that also. Configure it to "extend" the network created by your Extreme.
As you can see it's quite versatile.

Adding 802.11b/g AX(s) to multi-Airport Extreme 802.11n roaming network

First, a thanks to folks like Tesserax and Bob for the great ideas on this forum -- the questions & answers I've read have helped me to date, though I still have a question!
My home wireless network today consists of:
One fifth-generation AEBS running in 802.11n only (5 GHz) / 802.11n only (2.4 GHz) mode, on channels 149 (automatic)/11 (automatic) -- provides DHCP services
One second-generation AEBS running in 802.11n only (5 GHz) mode, on channel 157 (automatic) -- bridge mode
There is a wired home network with Cat5e and a gigabit switch in the basement. 30 down/5 up DOCSIS 3.0 service through Time Warner Cable, upstream from the fifth-gen AEBS. The AEBS units are connected in roaming mode via Ethernet.
Using the Airport Utility on my iOS devices, I'm getting "excellent" (59-65 Mb/s) connectivity when I am near either of the AEBS units. It is a large brick house built in the 1920s, and while there are now no dead zones in the house, there are areas where I drop down to 10-15 Mb/s per the Airport Utility. Unfortunately, the two AEBSs are at opposite ends of the house near external walls, one on first floor and one on second -- and the first floor rear AEBS needs to be where it is to serve a breakfast room and sunroom, while the home office AEBS needs to be where I have two Ethernet drops as the cable modem and switch are in the basement.
Before I added the fifth-gen AEBS, I had the older AEBS and two 802.11b/g Airport Express (AX) devices, also in roaming mode. I wasn't thrilled with performance, and while performance is much better with the two AEBS model, I'm wondering about the benefits of redeploying my AX devices elsewhere in the house on the roaming network -- on the theory that I should be getting better 802.11g performance from a device close enough to get max speeds than I am from a farther-away 802.11n AEBS.
However, I am concerned about whether adding back in 802.11b/g devices on 2.4 GHz would restrict the performance of my 802.11n network? I am assuming that might happen because I have 802.11n running on both frequencies... if I stepped back on the fifth-gen AEBS to 802.11n only (5 GHz) / 802.11b/g [or a similar setting] on that device, will that help? Or, am I running the risk of other cross-talk or interference -- or simply of my home network devices being befuddled by multiple access points in a single house?
Alternatively, I could try to replace my 802.11b/g AX units with 802.11n ones -- howeever, having just bought a new AEBS this week, that would encounter cross-talk with my Spousal Budgetary Compliance Unit (SBCU) and I could end up crashing the entire household....
Thoughts and ideas appreciated!

If you use the "b/g" AirPort Express devices in a roaming setup, any computers, iPads, etc in close proximity will connect at maximum "g" wireless speeds.
It's really not possible to predict the actual results in advance. The increased wireless coverage might tend to compensate for the lower speeds that would naturally occur due to signal drop off if you did not use the AirPort Express devices at all.
As long as the wireless access points are in a separate room, or separated by 25-30 feet or so from other access points, there should be no confusion that occurs with your laptop trying to connect. It will pick the strongest signal as it moves through the house.
I think the bottom line here is that this is one of those things where you just will not know unless you try. If the Ethernet cabling is already in place, it should not take long for you to find out how things are working.

After setting up my brand new Airport Express 802.11n and accidentally using it to connect my iMac to the network...my iMac no longer connects through Ethernet? Any ideas...I have tried everything without success!!

I have been using Apple technology for about 10 years starting with 1st generation iPods and our house now includes a 5 year old iMac, all versions of iPods and touches, Apple TVs (both generations) and most recently an iPad 2. I have always told family and friends that Apple technology just works. Unfortunately that stopped today. I bought a new Airport Express 802.11n to use for AirTunes around my new pool. I set it up from my iMac and accidentally used it to connect my iMac to the network for a short time. Now I can no longer connect the iMac to the network using a hard wired Ethernet cable. I have tried resetting everything possible, from hubs to routers to the Mac itself and it just will not connect to the network through Ethernet any longer. I am now a very frustrated Apple user especially when the support site says I can't use the fast path support because my product was manufactured 5 years ago...I just bought it at BestBuy yesterday. All other computers and itechnology in the house are connecting via wifi and Ethernet without any issue except from my new iMac boat anchor. Anybody who can help me??? Thanks

John, thanks for the email so quickly.
I too hope I haven't tried "everything" either but I am reasonably technical. I had done what you suggested to do before but I did both again.
Ethernet is yellow in the left side bar. In the right pane it's status says Connected but then below it says "Ethernet has a self-assigned IP address and will not be able to connect to the Internet."
I have tried the assist me menu and Network Status has Ethernet Green, Network settings Yellow, ISP Green, and Internet and Server Red and Failed for both. I have turned things off and on, checked cables, deleted all locations and tried restting them up but to no avail. I even disconnected everything and connected the mac directly into the cable modem itself and the thing still will not connect.
Thoughts???

I have a pc running windows 7. I got an Airport Extreme 802.11n Wi-Fi and the printer is now plugged into the Airport. The wireless router works fine but the printer shows as offline in control panel and in word. The printer is a HP LaserJet CP1525nw.

I have a pc running windows 7. I got an Airport Extreme 802.11n Wi-Fi and the printer is now plugged into the Airport. The Airport works fine but the printer shows as offline in control panel and in word. The printer is a HP LaserJet CP1525nw.

+For now I have it set to Share Public IP address - Is this correct for my Network Setup with The Airport Extreme being the only router being used ?+
This would be the correct setting if the AirPort Extreme is connected to a simple modem (one ethernet port).
*Settings I have Enabled*
5 GHz name indicates that you have elected to use the option to assign a separate name to the 5 GHz network. This will allow you to "tell" compatible computers to connect to that network, rather than the slower 2.4 GHz network
Use Wide Channels is recommended for 5 GHz operation.
Interference Robustness often does more harm than good and should not be used unless you know you are in a area with a lot of wireless networks and you feel that your network is experiencing interference issues from a nearby network.

Not able to see disk connected to AirPort Extreme 802.11n

I just installed my AirPort Extreme 802.11n Wireless Base station. Wireless internet works like a charm, however, I cannot see my external hard disk when it is connected to the base station (amber light blinking and when checking the problem, I am told that "Disk needs repair"). When connecting the hard disk directly to the PC, I have no problem seeing the data. Any tips or tricks out there... ?
AirPort Extreme 802.11n Windows XP

I finally got my 500 GB Western Digital MyBook USB drive to work by reformatting it to HFS+ format.
Of course, before I could do that, I had to copy all my files onto another hard drive. That job took a day to accomplish.
I work with Poser, and have a lot of content installed... We're talking thousands of files.
Once the drive was reformatted to HFS+ format, I copied everything back over. That took another day. Then I connected to the AEBS.
The USB drive was immediately recognized. It was incredibly easy to access the USB drive on my PCs. It required no effort on my part, except to supply the password.
In the end, I've decided this effort is a failure.
The drive is way too slow for my needs. Also, one of my vital Poser utilities (CorrectReference Pro) will not work properly with the USB drive on the AEBS.
I am currently in the process of copying all those files over to two external USB hard drives attached to my other PC.
Then I plan to unmount my 500 GB MyBook drive, and reformat it back to NTFS. I'll let the Notebook PC have it on a direct connection again.
I have a couple "junk" External Hard drives that are 160 GB. Maybe I'll use one of those as an Airport disk...
But I won't be using the Airport disk for anything important. It's too slow.

Connecting AirPort Express to AirPort Extreme 802.11n

The following steps helped me set up an AirPort Express base station connected to a set of wireless speakers with my new AirPort Extreme 802.11n base station. I’m posting this because the process was not entirely intuitive, at least not to me.
I’ll assume you have set up the AP Extreme base station to connect to the internet and run your home network and that you are connected to your wireless network.
Make sure you set-up the AP Extreme base station to broadcast in 802.11n + 802.11b/g modes, i.e. both at once. You will also have to check he setting that allows the newtork to be extended.
Reset the AP Express base station so that in runs on the factory defaults by pressing the reset button with a paper clip. Wait for it to completely restart.
Launch the AirPort Utility. You should see both your AP Extreme and AP Express base stations in the left hand column. Click on the AP Express base station you just reset. When it asks to switch wireless networks do so. Then hit continue.
On the next screen select “Connect to my current wireless network” option and hit continue.
On the following screen select the “Extend the range of my AirPort Extreme or AirPort Express network” and hit continue. Do NOT select the “Join my wireless network” option even though it says this is how you connect to wireless speakers. This is the part that was not obvious to me. When I tried this the AirPort Express base station flashed orange and wouldn’t connect despite waiting 30 minutes.
Chose the network you wish to extend from the drop down menu. My keychain supplied the password for the network.
Give your base station a name and hit continue.
Select the main base station in the list provided. This is the one connected to the internet and hit ok.
The Airport Utility software will configure the network to accept the AirPort Express base station.
Now all that’s left is to connect your wireless speakers to the AirPort Exppress base station. You can now play music through AirTunes while being connected to your fast 802.11n network.

I recently setup an Airport Express in conjuction with my Extreme Base Station. I'm not really understanding how this method enables 802.11n connection speeds (via Base Station) to the internet and also allow streaming music through the Express at 802.11b/g. It's my understanding that if you want to be able to access the internet AND stream music at the same time the Express needs to join the network. In order for the Express to join the network (able to recognize the Base Station)...the Base station needs to be changed from 802.11n only to 802.11n (802.11b/g compatable)....which essentially means your connecting to the internet at 802.11b/g. If your wanting to keep 802.11n only on the base station...you would have to create a seperate network via the Express to stream music. What this means is you CANNOT access the internet and stream music at the same time. You would have to manually change Airport in the taskbar to do one or the other.
Am I off base here? If I am missing something please let me know...because it would be great to be able to connect to the internet at 802.11n only with a multi-case rate set to 23Mbps vs. the 11Mbps (maximum) of the 802.11b/g compatable option.
I guess what is confusing me is that my setup is basically the same as what was described above..minus having the "Extended Network" being enabled. How does extending the network change things?

Help needed connecting Iomega Minimax Ext HDD to Airport Extreme 802.11n

Would appreciate if someone can help me with the following task. After researching and trying several things, I have not succeed in resolving the issue.
I want to connect a Iomega MiniMax Ext HDD (for Mac) to my (Airport Extreme 802.11n + Time Capsule) box using the USB port at the back of my Airport Extreme. Then I want to access the Ext HDD wirelessly as a drive on my Macbook (snow leopard OS). I was told this was possible at the Apple Store...but have failed so far.
Any suggestions so far

Hello smitra. Welcome to the Apple Discussions!
The following are the basic steps for sharing an external USB drive attached to either an 802.11n AirPort Extreme Base Station (AEBSn) or a Time Capsule (TC):
o Plug the hard disk into the USB port on the back of the base station.
o Open AirPort Utility, located in the Utilities folder in the Applications folder on a Mac, and in Start > All Programs > AirPort on a computer using Windows
o Select your base station, and then, choose Manual Setup from the Base Station menu.
o Click Disks in the toolbar, and then, click File Sharing.
o Choose “With a disk password,” or “With base station password” if you want to secure the shared disk with a password, or choose “With accounts” if you want to secure the disk using accounts. If you choose to use accounts, click Configure Accounts, click the Add "+" button, and then enter a name and password for each user that will access the disk. For simplicity, I would recommend using the "With a disk password" option.
o Choose “Not allowed,” “Read only,” or “Read and write” to assign guest access to the disk.
o Select the “Share disks over Ethernet WAN port” checkbox if you want to provide remote access to the disk over the WAN port.
You should now be able to find this drive within Finder under the SHARED category.

To extend AirPort Extreme 802.11n

Wanting to extend the range of my AirPort Extreme 802.11n (version 7.4.2)
I have a Airport Express as trial also a 802.11n. AirPort Utility has a lot of trouble finding the Express. When AirPort Utility does find it and I want to set up the Express I have to switch from the Extreme to the Express. Unfortunate side-effect is that AirPort Utility then looses track of the Extreme and I can't "join" the Express as Utility can't find anything to join.
As I have the Express on trial of a friend I did the normal reset (button for 10 sec) and even the factory reset (unplug, press reset button while plugging in) however I did notice it still had his settings. Changed those but as I said before it seems for AirPort Utility is is either or instead of both.

Based on your description, it sounds like the AXn is configured to join the wireless network created by the AEBSn ... not extend it.
The following would be the basic setup steps for extending a wireless network:
o If practical, place the base stations in near proximity to each other during the setup phase. Once done, move them to their desired locations.
o Open AirPort Utility and select the base station that will connect to the Internet.
o Choose Manual Setup from the Base Station menu, or double-click the base station to open the configuration in a separate window. Enter the base station password if necessary.
o Click AirPort in the toolbar, and then click Wireless.
o Choose “Create a wireless network” from the Wireless Mode pop-up menu, and then select the “Allow this network to be extended” checkbox.
o Next, select the base station that will extend this network, and choose Manual Setup from the Base Station menu, or double-click the base station to open its configuration in a separate window. Enter the base station password if necessary.
o Choose “Extend a wireless network” from the Wireless Mode pop-up menu, and then choose the network you want to extend from the Network Name pop-up menu.
o Enter the base station network and base station password is necessary.
o Click Update to update the base station with new network settings.
(ref: Page 46 of "Designing AirPort Networks Using AirPort Utility.)

I hope this might interest someone. The situation; 3 floors,I am having trouble with an an Airport Extreme, 802.11n on the top floor and a Mac Pro 3.1 on the bottom floor. Not always but often it has trouble seeing the Airport and making a connection. I h

I'm not sure how to post a message. I hope this might interest someone. The situation; 3 floors,I am having trouble with an an Airport Extreme, 802.11n on the top floor and a Mac Pro 3.1 on the bottom floor. Not always but often it has trouble seeing the Airport and making a connection. I have an older Airport Express, would it help to install it? would it work best if it was installed in the same room? should it be installed half way in between? Get another Extreme? The Mac Book Pro on the middle floor can see 11 networks in the neighbourhood if that might be causing a problem or would if I installed the Express. Thank for your consideration.

Thanks for your time ... I appologize for the font and colour, I compossed the question in pages and failed to notice the font colour as grey ... there are a variety of computers of various ages so I think it is using a setting that allows both 5G and 2.4 ... the connection to the Airport is thru a cable modem and cable does run throuhout the house ... maybe those hard wires would be a place to look at ... do you think that putting the 'Express' on the second floor might help ... thanks again ...

AirPort Extreme 802.11n as a wireless router and local network switch?

Good afternoon,
I'm curious if its possible to have the APE in wireless network mode and connect systems via hard line as well?
I have an AirPort Extreme 802.11n set to "Create a Wireless Network" mode that is attached directly to a cable modem for internet connectevity. My issue is that while all wireless devices (several iPods, two iPhones and three laptop computers) connect to the APE without issue (and have internet access), when I try to plug in a Windows 7 desktop computer via one of the ethernet jacks, Windows is unable to connect and shows the network as "unidentified," spitting back a private IP address as opposed to a local LAN (this behavior repeats for an Ubuntu Linux box as well).
Not sure if the APE is misconfigured, this is a Windows 7 issue or if its improper use on my part (though this also precludes me from connecting a gigabit switch to the APE).
Thank you,
Nathan

Properly configured, the AirPort should provide both wired and wireless network client with Internet access.
At this point, I would recommend that you do the following as a minimum:
Power-down the modem, AirPort base station, and computer(s).
Power-up the modem; wait at least 10-15 minutes to allow it adequate time to initialize.
Power-up the AirPort base station; wait at least 5-10 minutes. Note: The AirPort's status light may continue to flash amber after it has intialized. That is because, there may be some additional configuration items necessary, like setting up wireless security, before the overall setup is completed to get a green status.
Power-up your computer(s).
If the above steps do not solve the problem, start over with step 1 above, but then perform the next steps between steps 1 & 2. above.
Disconnect the AirPort base station from the Internet broadband modem.
While all of the devices are powered-down, perform a "factory default" reset on the base station. This will get it back to its "out-of-the-box" configuration and make setting it up much easier, especially if you use the "Assist me" process within the AirPort Utility. (ref: Resetting an AirPort Base Station or Time Capsule)
After the base station resets, go ahead and power it back down.
Reconnect the AirPort base station to the Internet broadband modem. For the Extreme and Time Capsule, be sure to connect the cable to the base station's WAN (circle-of-dots) port.
Continue with step 2 in the first set of steps.
In this basic configuration, the AirPort base station will broadcast an unsecured wireless network with a Network Name (SSID) of Apple Network NNNNNN. Network clients, connected to the base station either by wire or wireless, should now be able to access the Internet through the ISP's modem. Once Internet connectivity has been verified, you can use the AirPort Utility to configure the base station for wireless security and any other desired options. Please post back your results.

USING TWO AIRPORT EXTREMES (802.11N) INTERNET IS VERY SLOW

I live in a 5000sq ranch in arizona and have our internet set up in one end of the house. We have an airport extreme 802.11n and it wasnt putting out a good signal to the other end of the house so we got another airport extreme and airport express to expand out network. By the way both are 802.11n and the internet is still not even usable because it is so slow. The only computer that has some sort of speed is the mac tower that is hardwired to the airport. PLEASE HELP!!!!!!!!!!!!!!!!

If you could ethernet the two Extreme N routers(try to place the second further into the house) and set the second in bridge mode and set to create its own wireless networrk. Use the manual configuration. The third can join the second, signal should reach and be strong. This must be in bridge mode also.
there are many different ways to set the configuration for wireless but the bridge mode is a must do.

Airport Exterme 802.11n Wi-Fi MC340LL/A not sure about some settings ?

Similar Messages

Maybe you are looking for