Airport Extreme 2nd Gen - can not retrieve or assign an IP address

I had two 2nd gen Airport Extreme base stations. One connects to the internet, the other bridges the network to my office where I have wired devices connected. The office base station was no longer allowing me to connect to my USB drive for time machine backups, but all of the wired devices were routing to the internet properly.
I purchased a new base station (5th gen), bringing my total to three extreme stations and two express base stations (one express for an old wired network printer, the other for streaming music).
The old main base station is moved into the office, and the new base station (5th gen) becomes the "main" internet access point. I reset both devices and they install without a hiccup. Ditto the new express stations - they connect without having to reset them. Everything works as it did before the upgrade.
I take the old office base station (the one that would not allow me to backup via time machine) and do a factory reset. It reboots, the light flashes yellow (not surprising). I hook an old macbook (10.6.8) up to the old base station (and turned off the wifi) using a wired ethernet cable the ethernet port is assigned an IP address (10.0.1.2) via DHCP. My other macbook pro (10.8.5) running the latest AirPort Utility sees the old base station using wifi (under other wifi network). I select the old base station it automatically connects it to my new base station stating:
"This Airport Extreme will now be set up to extend <my new 5th gen AirPort Extreme base station>"
I change the default name and click next.
Now when the old office base station boots it will not connect to the network - it still flashes yellow. It will not assign itself an IP address, the macbook plugged into the ethernet port (using dhcp) shows (under network settings):
"Ethernet has a self-assigned IP address and will not be able to connect to the internet."
(the 169.... number)
Now the funky part. I manually set the wired ethernet's IP4 configuration (IP, subnet, router and dns server) on the old Macbook running snow leapord (10.6.8) - remember the wifi is turned off - and bingo - I am connected to the internet. All the while my old AirPort Exreme continues to blink yellow. If I manually assign an IP address to the AirPort Exreme's light turns green.
Clearly the old device is working. The ethernet port works, the wifi works - routing traffic from the wired ethernet through my home network and out to the internet. My AirPort utility on all my macs can see the base station, and can configure it (via wifi). I have even tried (via wifi) downgrading the firmware to 7.6.3 and then to 7.6.0 and the back up to 7.6.4. The only thing it will not do is give retrieve an IP address, or assign an IP address to wired devices.
Any ideas?

I attempted to see/access (via the Disk Utility on my iMac) two drives already connected to my AirPort Extreme, but could not.
These drives are shared "network" drives, which Disk Utility cannot access. Disk Utility will only be able to access a drive if it is connected directly to a Mac.
If you need to format the drive(s), partition them, etc., you must do so with the drive connected directly to the Mac, then move them to the USB powered hub location at the AirPort Extreme.
These drives are available through the Finder and are used for Time Machine
Apple does not officially support Time Machine backups to a drive connected to the AirPort Extreme, but some users seem to be able to make this work.
1) Can I see/access USB drives (properly fomatted and visible/accessible in the Finder window) attached to my AirPort Extreme (2nd gen-firmware version 7.6.2)via a powered USB hub?
Probably. Some users find that one powered hub will work for them while another might not. To "see" the drives, you must first click on the AirPort Extreme icon under the SHARED heading in the Finder. Then, if the drives are formatted in Mac OS Extended (Journaled), each drive will appear as a folder. Double click the folder name to mount the drive on the desktop.
2) Can I use my iMac (running Lion 10.7.4) to create a concatenated disk set with USB drives (of varying size) attached to my AirPort Extreme via a powered USB hub?
The drives will all appear as separate drives, which must be accessed separately. If you were thinking of trying to start Time Machine backups on one drive and have them continue automatically on another drive when the first drive is full, that will not work.

Similar Messages

How to connect an HP 111 designjet with my airport extreme 2nd gen with bonjour for windows

Hi:
I have an HP 111 Tray, plug into an airport extreme 2nd Gen, both works properly running in a PC with windows 7.
When I start Bonjour for windows it identify de printer, but when i continue my printer is not in the list, I used the browse buttom and selected the .inf file that is contained in the driver and Bonjour collapsed everytime
Any one can Help me??
Thank you guys
Hola:
Ante todo buenos dias, os cuento mi problema:
Tengo una impresora gran formato HP 111 Tray (con bandeja) enchufada a un router Airport Extreme de Apple de 2ª generacion, ambos funcionando correctamente y con las ultimas actualizaciones de firmware, el caso es que al abrir el asistente BOnjour para imprimir en red a la hora de seleccionar la impresora no aparece entre las opciones disponibles, a pesar de reconocerla. Al darle a examinar para que utilize los datos de Información sobre la instalación (.inf) que me he bajado de la pagina, Bonjour se queda colgado siempre
He probado desde dos ordenadores diferentes conectados a la red y nada
Alguien sabe como puedo solucionarlo.
La impresora se conecta con un USB al router de Apple
Muchas gracias de antemano

What model and firmware is the 2TB TC?
What firmware is the AE?
Does the AE get good signal from the TC in its current location?
Signal can only be extended that is received intact.
Is it extending on 5ghz? As I remember it a Gen2 AE is only single band, although you can choose either 2.4ghz or 5ghz.
I am fairly sure you are going to tell me your TC is AC model..
I would do a couple of things..
1. Fix the wireless name, make it short, no spaces and pure alphanumeric.
2. Fix the wireless channel for 2.4ghz so it is not going to jump around.
3. Get real results from the AE in its current location for signal strength.. this is really only possible on v5 utility. And that is a double pain with Mavericks because you cannot use it.
Apple have removed all the useful diagnostics from the airport utility. There is next to nothing left. So you need to use the computer and its diagnostics to find signal levels in the location.
http://support.apple.com/kb/HT5606

HT3546 I have been unsuccessfully trying to extend the wifi of my Time 2T Capsule with an Airport Extreme 2nd Gen. It works for a while and then loses configuration. I have done everything possible, disconnected it, reset it but it keeps failing, what to

I have been unsuccessfully trying to extend the wifi of my Time 2T Capsule with an Airport Extreme 2nd Gen. It works for a while and then loses configuration. I have done everything possible, disconnected it, reset it but it keeps failing, what to do?

What model and firmware is the 2TB TC?
What firmware is the AE?
Does the AE get good signal from the TC in its current location?
Signal can only be extended that is received intact.
Is it extending on 5ghz? As I remember it a Gen2 AE is only single band, although you can choose either 2.4ghz or 5ghz.
I am fairly sure you are going to tell me your TC is AC model..
I would do a couple of things..
1. Fix the wireless name, make it short, no spaces and pure alphanumeric.
2. Fix the wireless channel for 2.4ghz so it is not going to jump around.
3. Get real results from the AE in its current location for signal strength.. this is really only possible on v5 utility. And that is a double pain with Mavericks because you cannot use it.
Apple have removed all the useful diagnostics from the airport utility. There is next to nothing left. So you need to use the computer and its diagnostics to find signal levels in the location.
http://support.apple.com/kb/HT5606

Airport Extreme (2nd gen) not seen in Finder under "shared"

Specs:
15-inch Early 2008 >Processor 2.4 GHz Intel Core 2 Duo>Memory 4 GB 667 MHz DDR2 SDRAM>Software Mac OS X Lion 10.7.5 (11G63)
Airport Extreme Second Gen with Airport Utility 7.6.1
I do not want to update to Mountain Lion again.. since the first time proved to bring with it crashing and lots of glitches. And, I only ever do totally clean installs, wiping my HD with a 3x pass in disk utility. Main problem: External HD's which used to connect to my network with the AE under the "shared" sidebar, no longer appear. Matter of fact, my Airport Extreme in general, no longer appears in the Network folder. Nor do I see the ext HD under the "Disks" tab in Airport Utilities.
The external IS formatted as HFS Journaled *extended*, and has been for a while, back to when it used to work. I'm not sure of when it stopped being recognized, but the factors that have changed since then are that I did update to ML, but soon after went back to Lion. I also recently moved, and had to set up a new network of course. I also think perhaps that the Airport Utility version changed during this time.
I've read so many support documents, forum threads *different forums* and nothing seems to point me to a working solution. The HD does indeed work, since I of course plugged it straight in to my MacBook Pro's, and it shows up on both of them. Oh, should note that the other MBP is a year newer than the one listed above. It is the first unibody model 13". Question is, why would something that was working, stop working? I'd maybe be brave enough to roll back to Snow Leopard, but I'm really positive it was also working under Lion, so I shouldn't have to.
I'd really love some help on this please. Oh, and this is NOT in order to use Time Machine. I never use it. This is simply to access redundant backup drives on the network for photos and music.
Thanks much,
Doug

I spoke too soon, sort of. While the information I got from the Sonos website is accurate, and did indeed help in getting things started, the external HD with the enclosure I bought still isn't working! I even went so far as to reformat the drive last night, even though it was already formatted correctly. Just tried a few minutes ago, and nothing... The permissions look exactly as they do on the other disks so I'm not sure of what's up. At first, I thought that maybe Apple changed something about how the Airport Extreme sees externals, such as they must meet specific network based criteria... but then I tried a several year old iOmega portable Go drive, that I hooked up via micro USB and it worked immediately.
Now I'm wondering if there really might be something to what you said, about the enclosure. Is there a precedent for such an issue? Has anybody else here experienced this? But the wacky thing is that this external with enclosure was working perfectly not too long ago. So what has changed? I moved, and set up a new network. That has changed. But aside from that? I tried earlier firmware versions, and that did nothing. So either an OS update or my enclosure is all of a sudden wonky... even though it works perfectly otherwise? VERY confusing. BTW, the enclosure is a Rosewill.
Doug

HP Laserjet 1020 is not recognized by Airport Extreme(2nd gen)

Per instructions on the manual, I hooked up my HP Laserjet 1020 to the USB port on the Extreme, hoping to use it as a network printer for 4 computers. It does not show up on the printer list and everything I have tried, including updating drivers and software, still does not work to have it show up. I'm wondering if this is one of those HP printers that does not work with the extreme.
Is there someone out there that has any ideas how I can get it to work, I would really appreciate any advice. Thanks.

I spoke too soon, sort of. While the information I got from the Sonos website is accurate, and did indeed help in getting things started, the external HD with the enclosure I bought still isn't working! I even went so far as to reformat the drive last night, even though it was already formatted correctly. Just tried a few minutes ago, and nothing... The permissions look exactly as they do on the other disks so I'm not sure of what's up. At first, I thought that maybe Apple changed something about how the Airport Extreme sees externals, such as they must meet specific network based criteria... but then I tried a several year old iOmega portable Go drive, that I hooked up via micro USB and it worked immediately.
Now I'm wondering if there really might be something to what you said, about the enclosure. Is there a precedent for such an issue? Has anybody else here experienced this? But the wacky thing is that this external with enclosure was working perfectly not too long ago. So what has changed? I moved, and set up a new network. That has changed. But aside from that? I tried earlier firmware versions, and that did nothing. So either an OS update or my enclosure is all of a sudden wonky... even though it works perfectly otherwise? VERY confusing. BTW, the enclosure is a Rosewill.
Doug

Touch 2nd Gen can not scroll text box down

I have a 2nd gen Ipod Touch and want to login to a public wifi which requires accepting a text box Condition & Terms.
It says: Please scroll to the bottom of the terms and click the checkbox to show agreement before clicking on the 'Accept' botton to access the system.
My question is: there is no way I can focus on the text box only and scroll down. Please advise. Thanks,
Link for the screen shot:
http://picasaweb.google.com/lh/photo/HaCCHeOxPgE8ddIG6Wyr5Q

Nope, you're done. To get iCloud you need at least a 3rd generation Touch. And, you CANNOT upgrade your 2nd Gen to make it a 3rd Gen..

Will my airport extreme 2nd generation work with docsis 3.0 cable modems?

Will my airport extreme 2nd Gen work with docsis 3.0 cable modems?

RRoger, everything is working fine.
So, what is the actual problem here? You are now wondering if the Vonage can handle the speed from the modem? Is that the "problem" after all this discussion?
now I am wondering if my current setup will allow me to get docsis 3.0 speeds.
What speed is your Internet provider delivering to you?
The AirPort Express uses 100 Mbps Ethernet ports, so it will handle up to 100 Mbps. We have already told you that.
Vonage likely does the same. The answer is almost certainly "yes" .......both the Vonage and AirPort will handle the speed from the modem.
If you want to double check this, please provide the model number of the Vonage, and we will try to look up the specifications for the device. If you have documentation there with specifications for the Vonage device, check to see if the Ethernet ports are listed as 10/100. This is standard with almost all devices, with some of them handling even higher speeds 10/100/1000.
Chances are, your network will handle a lot more speed than your service provider is supplying to you. So, the "choke" point on your network may very well be your service provider and modem......not the Vonage and AirPort.

Extending an Airport Extreme (6th Gen) network with older Airport Express models

I just purchased the latest Airport Extreme (6th Gen) base station to be my main wifi router. I have two airport express models that I used in the past to extend my network with my (very) old retired Airport Extreme (2nd Gen): the 2nd Gen model A1264 (you plug into the wall directly) - I've had it for several years, and the newest 3rd Gen model A1362 (small square that lies on a desk or table) - I just purchaed a couple of months ago.
My question is - will extending my network with either of these Airport Express models diminish my overall network speed (Especially the older model)?
I don't have any AC capable clients yet - so everything is running on the "n" band - and the older Express is an "n" model, but I just have this (perhaps irrational) fear that attaching older routers will slow everything down.
Any thoughts or suggestions?
Thanks!

will extending my network with either of these Airport Express models diminish my overall network speed (Especially the older model)?
The A1264 model will be able to extend only one band of the new dual band AirPort Extreme. Normally, the A1264 will extend the 2.4 GHz band since it is stronger than the 5 GHz signal.
The A1392 will be able to extend both bands since it is also a dual band model, providing that it is located where it can receive a strong wireless signal from the new AirPort Extreme.
Here, I am assuming that you are asking about extending wirelessly.
You might want to keep in mind that extending wirelessly always involves compromises and loss of bandwidth. The main reason for this is that an extending device can only "extend" the quality of signal that it receives.
The wireless signal from the new AirPort Exterme will slow down and lose strength the further that it moves away from the main AirPort. So, the extending device gets a slower, weaker signal to extend. The result is signficantly slower wireless performance in the extended areas.
The way to solve this is connect the extending AirPorts to the main AirPort using a permanent wired Ethernet connection. There is no signal loss in a wire, so the extending AirPort receives a full bandwidth signal to broadcast. The result is higher and more uniform speed on the entire network.

AirPort Extreme 6th gen, not recognize my printer HP deskjet ink advantage 1515

I have AirPort Extreme 6th gen, it can not recognize my printer HP deskjet ink advantage 1515.
I already contact hp support and they reply my printer is support by AirPort Extreme. This is the link web statement http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00710847&tmp_task=useCatego ry&cc=us&dlc=en&lc=en&product=5385208#N59
Also doing all instruction on the web, update firmware for AirPort Extreme and my ipad to latest firmware.
But until now I can not share my printer through my AirPort Extreme 6th gen in my network.
Anyone know how to solve this problem?

Hi tonyioancy,
Welcome to the HP Support Forums! I see you are running into a few problems with your HP Deskjet Ink Advantage 1515.
I would like you to run the HP Print and Scan Doctor- It was designed by HP to provide users with the troubleshooting and problem solving features needed to resolve many common problems experienced with HP print and scan products connected to Windows-based computers.
If you run the PSDR and are still experiencing the issues, please contact our technical support at 800-474-6836 as your printer may still be in warranty. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
http://www.hp.com/cgi-bin/hpsupport/index.pl
Thanks,
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Usb hard drive connected to AirPort Extreme 5th gen not detectable

hello
I connected a exFAT formatted HD via USB to my AirPort Extreme 5th gen.
I'd like to have access to it via my iMac as well as my gf's win laptop.
I only can se the drive in Airport utility but am not able to use it (copy files, read files I put on directly connected to my iMac).
so what could I do?
thank you in advance!
cheers Chris

Thank you!
That was a great hint. I can now access the external HD via my iMac.
on the other hand I'm no longer able to go online with my gf's win laptop.
there's no way to get an internet connection working.
I can see the wlan of the airport extreme but I am not able to log in...
I have no glue!
any help is highly appreciated.

Can't print from iPad to HP via Airport Extreme (5th gen)

I have an HP Deskjet 5900 connected to an Airport Extreme (5th gen), via the USB port. I'm currently running 10.6.8 and have succesfully setup the printer such that I can print wirelessly from my MacBooks, as well as directly from my MacPro desktop (which is connected to the AEB through the network).
What I can't do is AirPrint from my iPad or iPhone.
I've skimmed through quite a few questions on here, but haven't come across this specific scenerio. The closest one refers to printers that are AirPrint compatible, but I believe that only applies to wireless printers that are being connected on their own (without an AEB).
I really hope I don't have to download an app for this... it's built right into the iOS!
Thanks for the help.
Stephen

To use AirPrint directly from your iPad, you will need a printer that is AirPrint-compatible. Currently, the HP Deskjet 9500 is not one of them. There a few workarounds, but they will require obtaining an App.

How can I get Time Machine to back up an external hard drive (iPhotos) that is attached to airport extreme base station. Note: Time machine is usb to macbook pro and external drive with iphotos is usb to airport extreme base station. Help please. Thanks!

How can I get Time Machine to back up an external hard drive (iPhotos) that is attached to airport extreme base station. Note: Time machine is usb to macbook pro and external drive with iphotos is usb to airport extreme base station. Help please. Thanks!

Once you have the drive connected to your Mac, click System Preferences (gear icon) on the dock
Click Time Machine
Click Options
Be default, the hard drive will be Excluded from backups. Click the drive to highlight it, then click the "-" (minus) button at the bottom of the list to remove the drive from Excluded items.
The drive will be backed up on the next Time Machine pass
Everything above assumes that the hard drive has been formatted in Mac OS Extended (Journaled) as Time Machine will only backup drives in that format.

Why can't I connect to my airport extreme(4th gen.) after reseting the password

i was changing the password on my airport extreme(4th gen.) and it said that i changed it succesfully but it had a error when it was restarting and i can't connect back to the internet what should it do

Please perform a Factory Default Reset to clear the old, and possibly corrupted settings on the AirPort Extreme to get it back to original settings. Then, reconfigure the device again using the passwords of your choice.
Resetting an AirPort Base Station or Time Capsule FAQ

Airport Express (2nd gen), Airport Extreme and Airport TimeCapule (3rd Gen) interoperability

Airport Express (2nd gen), Airport Extreme and Airport TimeCapule (3rd Gen) interoperability
When all configured to provide wireless the network (Wired/Wireless) become unstable and very slow. When I disable wireless on the Airport Express the problem disappears. The problem effects all endpoint clients (iPhones, iPads, Mac's and windows) Any ideas?
I own the following
Airport Express 802.11n (2nd gen)
Airport Extreme 82.11ac
Airport TimeCapule 802.11n (3rd Gen)
Config
Each of the Airport's WAN port is connected my AT&T Uverse modem
Latest firmware on each device
All use static IP's (192.168.1.x)
Airport's are all configured to "Create a wireless network" with same network name, security and password.
Wireless options are using Automatic for Radio's and Channels
Router mode is "Off (Bridge Mode)"

ragu75 wrote:
Config
Each of the Airport's WAN port is connected my AT&T Uverse modem
Don't do that. Decide which one of your AirPort Base Stations is to serve as your router. Connect that one, and no others, to the modem. Connect all the others to it, and configure them as bridges.

Downgrading Airport Express 2nd gen. to 7.6.1

Hi there,
I've just acquired another Airport Express today, 2nd gen., replacing a 1st gen. (n draft version) because of dual-band capabilities. Like other people, I have trouble with firmware 7.6.4 when playing music over AirPlay and optical to external DAC (see e.g. https://discussions.apple.com/message/19806591). I hear frequent high-pitch high-volume glitches, which ruins the listening experience. My 1st gen. could downgrade to 7.6.1 through AirPort Utility, but I can't do that with the 2nd gen. The message is "The selected firmware file is not compatible with this AirPort base station." I got the file as detailed on this site: http://www.laszlopusztai.net/2013/02/11/downgrading-airport-extreme-to-7-6-1/ (I tried all of them called 7.6.1.)
TL;DR: Is there any way to downgrade AirPort Express 2nd gen. to firmware version 7.6.1 so that optical out to a DAC works again?
Thanks!

Tks for the info.
I read tons and tons of posts here... have the same problem : can't downgrade from 7.6.3 to 7.6.1 because my airport express has been shipped with the 7.6.3 firmware version (how lucky ! ;-(
And no way to manually install the 7.6.1 binary as well (found here : http://www.laszlopusztai.net/2013/02/11/downgrading-airport-extreme-to-7-6-1/ see comments) when using the option key (option "Other").The install failed.
So, no solution at all ?? This is crazy !
Message was edited by: Fredolinho
Message was edited by: Fredolinho

Airport Extreme 2nd Gen - can not retrieve or assign an IP address

Similar Messages

Maybe you are looking for