Airport Extreme 2nd generation on a roaming network: is it capable of doing this?

I am having difficulty setting up a roaming network using a 2nd generation Airport Extreme and Airport Express. Airport Utility doesn't "see" the Airport Express when it is connected to the Airport Extreme via CAT 5 cable. Apple support document for setting up a roaming network references applicability to Airport Extreme 3rd generation. Is a 2nd generation unit not capable of doing this?

What I would like for it to do are the following:
- host h.264 videos that can be viewed either on the web or downloaded
Yes.
- host all types of files that can be embedded or downloaded, such as .PPT, .doc, .PDF, etc.
Yes.
- host .flv files that can be embedded on various pages
Haven't tried hosting flash video. Apple tends to host H.264 streams.
- setup to push images to Macs across our organization
Yes.
Does any of this seem unreasonable?
No.
Can it do all of this simultaneously?
The web serving capabilities of an Xserve box are typically limited by sufficient storage and network bandwidth. The box itself is fast. Some folks look to use content providers for higher-volume requirements; this for loads larger than your network bandwidth and your available Xserve servers.
What else can a server like this do?
[Here are the major features|http://www.apple.com/server/macosx/features>, and you can get to the manuals from there.

Similar Messages

Will my airport extreme 2nd generation work with docsis 3.0 cable modems?

Will my airport extreme 2nd Gen work with docsis 3.0 cable modems?

RRoger, everything is working fine.
So, what is the actual problem here? You are now wondering if the Vonage can handle the speed from the modem? Is that the "problem" after all this discussion?
now I am wondering if my current setup will allow me to get docsis 3.0 speeds.
What speed is your Internet provider delivering to you?
The AirPort Express uses 100 Mbps Ethernet ports, so it will handle up to 100 Mbps. We have already told you that.
Vonage likely does the same. The answer is almost certainly "yes" .......both the Vonage and AirPort will handle the speed from the modem.
If you want to double check this, please provide the model number of the Vonage, and we will try to look up the specifications for the device. If you have documentation there with specifications for the Vonage device, check to see if the Ethernet ports are listed as 10/100. This is standard with almost all devices, with some of them handling even higher speeds 10/100/1000.
Chances are, your network will handle a lot more speed than your service provider is supplying to you. So, the "choke" point on your network may very well be your service provider and modem......not the Vonage and AirPort.

How can I strenghten a weak Airport Extreme (2nd Generation) signal?

I have been having a weak WiFi signal in my Airport Extreme. Even when I am in a room that is less than 30 ft away.
Here are the details:
AirPort Extreme 802.11n (2nd generation)
     Version: 7.6.1
     Wireless Mode: Participate in a WDS network
     Wireless Security: WPA/WPA2 Personal
     Channel: 6
     Connect Using: Ethernet
My Airport Extreme is on the second floor of the house and is connected to a D-Link DIR 825 router that is on the first floor.
Sometimes when I am on the second floor, I get a better signal from the D-Link router than from the Airpot Extreme.
How can I strenghten the signal?
Thanks in advance

Open Macintosh HD > Applications > Utilities > AirPort Utility
Click on the AirPort Extreme
Information about the device will be displayed in the area to the right
The 3rd Generation product was the first Apple simultaneous dual band router, introduced in March 2009. Minor changes were made in the chipsets between the 3rd Generation and 4th Generation versions with some antenna improvements added in the 4th Generation versions as well. The 4th Generation version was introduced in October 2009.

Dual band set up with Airport Extreme "2nd Generation"?

I'm running an Airport Extreme as my Wi-Fi router. When I open Airport Utility it finds the Airport Extreme and calls it "Airport Extreme 802.11n 2nd Generation." I'd like to run this in dual band, since I have some older Airport Expresses that can't go 5Ghz. Is this possible with this unit? I can't find this unit on the Apple site, to get specs. If I can't run it in dual band mode, I end up changing the config every time I want to stream music to my older Airport Expresses. I get much faster Internet performance on my MacBook Pro when the Airport Extreme is set to 5Ghz.
Can someone list out for me the settings that I should use, to at least get the best performance out of this router, and my Airport Expresses. I have the Expresses set to "join a network" so they don't slow things down. Maybe that's not the right settings? My Apple TV, 2 Airport Expresses, iPad, iPhone, MacBook Pro and wife's PC need to share this/these network(s). Any suggestions? Please be specific. Thanks.

When I open Airport Utility it finds the Airport Extreme and calls it "Airport Extreme 802.11n 2nd Generation.
This version is not a simultaneous dual band router. You can run a 5 GHz network...or...a 2.4 GHz network, but not both at the same time. A simultaneous dual band version....3rd Generation AirPorts and higher....would allow the wireless router to provide both types of signals at the same time.
I get much faster Internet performance on my MacBook Pro when the Airport Extreme is set to 5Ghz.
That would be expected, since a good 5 GHz wireless connection will run...on average.....at 2-3 times the speed of a 2.4 GHz connection.
I have the Expresses set to "join a network" so they don't slow things down. Maybe that's not the right settings?
If these are older "b/g" versions, that is all that you can do. Newer "n" versions of the Express could be configured to "extend" the network, providing more wireless coverage while running at higher "n" speeds.
Can someone list out for me the settings that I should use, to at least get the best performance out of this router
You already know that 5 GHz provides the 'best" performance for your Mac, but if you have older AirPort Express devices, they cannot connect at 5 GHz. Neither can an iPhone or iPod, and probably the PC as well.
So, the best compromise on your current Extreme would be to use the default settings for 2.4 GHz, which would provide an 802.11 "b", "g" and "n" wireless signal....compatible with all of your devices. You may already be doing this.
If you decide to purchase a newer version of the AirPort Extreme, then you will have the benefit of being able to run both 5 GHz and 2.4 GHz networks simultaneously....so everything will connect to the respective 'best" signal.
Then the current AirPort Exteme that you have now could be reconfigured to "extend" the network if you need more wireless coverage in another area. But...another compromise coming.....it can only "extend" one band...either 2.4 GH or 5 GHz, but not both.
Unfortunately, you would need another simultaneous dual band AirPort to be able to "extend" both bands.

AirPort Extreme 2nd Generation

Hello, i want to ask, can i connect HDD to this device, to use it for time machine, or LAN Hard drive and to download information directly to it?

The 2nd Generation AirPort Extreme does not support Time Machine backups to a drive connected to the USB port on the device. That being said, there are always some users who will claim that they have been able to make it work.
As far as connecting a hard drive to the LAN port on the AirPort Extreme and using that for Time Machine backups, you would have to check with the drive manufacturer to verify if that might work.
The 2nd Generation AirPort Extreme will support up to a 4 TB USB drive. I do not know if there is a limitation on the Ethernet ports.

Extend 5 GHZ network with airport extreme 5th generation

I'm having issues extending a 5 ghz network with an airport extreme 5th generation. Here is what I have -
1 brand new airport extreme (2013) in the basement connected to the cable modem. It nearly doubled the speed I was getting over the 5th gen.
I moved the 5th generation airport extreme up to the office on the first floor. Due to the construction of the house and a mess that previous owners made with the wiring, it's cheaper for me to have multiple devices extend the network to various parts of the house than it is to tear open the walls and try to fix the coax issue. I have a 4th gen and a 2nd gen, as well as a few airport express models. So, the 4th gen extends the 5 ghz network without a problem. I use the 2nd gen to provide 802.11g (2.4 ghz) to some older devices that can't handle 802.11n. Both work fine. When I moved the 5th gen upstairs to extend the 5ghz network in the office it won't do it.
I did a factory reset on it, Set it up with a new device name, and set it to extend the 2.4 ghz network, and it works without a problem. If I change it to extend the 5 ghz network, it restarts and then flashes amber. The airport utility can no longer see it and I have to do a factory rest in order to get it working again. I downgraded the firmware, but that made no difference.
Any idea why the 4th gen works for this, but the 5th gen fails ?

At times, a Hard Reset will not completely clear all of the old settings when you reset the device, and as a result, you do not start from a true factory default.
If you have not already done so, try a Factory Default Reset this way.....
Power off the AirPort Extreme
Wait a few minutes
Hold in the reset button first, and keep holding it for 9-10 seconds while you simultaneously plug the power back into the AirPort Extreme
Release the reset button after the hold period, and allow a full minute for the AirPort to restart
Not sure what else to suggest, other than taking the device to an Apple Store.....if you have one near you....to let them take a look.

Can the WAN port be used as LAN when AirPort Express (2nd Generation) is setup to join a wireless network?

Can the WAN port be used as LAN when AirPort Express (2nd Generation) is setup to join a wireless network? (IE: 2 LAN ports)
I haven't been able to get a clear answer on this. I believe the 1st generation would act as WAN/LAN depending on setting, but what happens with the 2nd generation?
Thank you for your time.

If the Express joins a wireless network wirelessly, in other words its WAN port isn't connected to anything, the correct way to connect a wired client to it is by using its LAN port.
I don't know what would happen if you were to connect a wired client to its WAN port instead — it's just not supposed to be used for that purpose. It won't permanently break anything if you were to try it though. If you were, the worst that would occur is that your network would become unresponsive as packets continuously traverse its WAN port in a circular fashion, which might require that you power down your router to reset your whole network.
If you are already using your Express's LAN port and you need another, the way to provide more ports is to purchase an inexpensive ($10 or so) switch. Connect it to the LAN port and as many other pieces of equipment as the switch's available number of ports.
You're correct about the first generation with the single Ethernet port. It could be used in either capacity depending on its configuration.

HT4145 Does this article apply to OS X Lion and Airport Utility 6.0? Reason: Airport Utility cannot find my Airport Extreme (4th generation) wirelessly on my Time Capsule configured network even although the firmware in both units is up to date.

Does this article apply to OS X Lion and Airport Utility 6.0?
Reason: Airport Utility cannot find my Airport Extreme (4th generation) wirelessly on my Time Capsule configured network even although the firmware in both units is up to date.

I thought you were trying to Extend the network with an Express as the article mentions you pointed to...
You can't find the Airport Extreme then...
I woudl suggest doing a Factory reset....
http://support.apple.com/kb/HT3728
Then you should be able to set it up just as you did when it was new....
Factory default reset (using reset button)
If the AirPort Base Station or Time Capsule isn't accessible from AirPort Utility, the Factory Default reset can be accomplished by using the reset button.
Unplug the AirPort Base Station or Time Capsule from power.
Press and hold the reset button with a pen or pencil, then plug the AirPort Base Station or Time Capsule back in while continuing to hold the button until you see the light (LED) flash rapidly. This should happen after a few seconds.
Release the button. This will factory default reset the AirPort Base Station or Time Capsule.

Airport Extreme 2nd Gen - can not retrieve or assign an IP address

I had two 2nd gen Airport Extreme base stations. One connects to the internet, the other bridges the network to my office where I have wired devices connected. The office base station was no longer allowing me to connect to my USB drive for time machine backups, but all of the wired devices were routing to the internet properly.
I purchased a new base station (5th gen), bringing my total to three extreme stations and two express base stations (one express for an old wired network printer, the other for streaming music).
The old main base station is moved into the office, and the new base station (5th gen) becomes the "main" internet access point. I reset both devices and they install without a hiccup. Ditto the new express stations - they connect without having to reset them. Everything works as it did before the upgrade.
I take the old office base station (the one that would not allow me to backup via time machine) and do a factory reset. It reboots, the light flashes yellow (not surprising). I hook an old macbook (10.6.8) up to the old base station (and turned off the wifi) using a wired ethernet cable the ethernet port is assigned an IP address (10.0.1.2) via DHCP. My other macbook pro (10.8.5) running the latest AirPort Utility sees the old base station using wifi (under other wifi network). I select the old base station it automatically connects it to my new base station stating:
"This Airport Extreme will now be set up to extend <my new 5th gen AirPort Extreme base station>"
I change the default name and click next.
Now when the old office base station boots it will not connect to the network - it still flashes yellow. It will not assign itself an IP address, the macbook plugged into the ethernet port (using dhcp) shows (under network settings):
"Ethernet has a self-assigned IP address and will not be able to connect to the internet."
(the 169.... number)
Now the funky part. I manually set the wired ethernet's IP4 configuration (IP, subnet, router and dns server) on the old Macbook running snow leapord (10.6.8) - remember the wifi is turned off - and bingo - I am connected to the internet. All the while my old AirPort Exreme continues to blink yellow. If I manually assign an IP address to the AirPort Exreme's light turns green.
Clearly the old device is working. The ethernet port works, the wifi works - routing traffic from the wired ethernet through my home network and out to the internet. My AirPort utility on all my macs can see the base station, and can configure it (via wifi). I have even tried (via wifi) downgrading the firmware to 7.6.3 and then to 7.6.0 and the back up to 7.6.4. The only thing it will not do is give retrieve an IP address, or assign an IP address to wired devices.
Any ideas?

I attempted to see/access (via the Disk Utility on my iMac) two drives already connected to my AirPort Extreme, but could not.
These drives are shared "network" drives, which Disk Utility cannot access. Disk Utility will only be able to access a drive if it is connected directly to a Mac.
If you need to format the drive(s), partition them, etc., you must do so with the drive connected directly to the Mac, then move them to the USB powered hub location at the AirPort Extreme.
These drives are available through the Finder and are used for Time Machine
Apple does not officially support Time Machine backups to a drive connected to the AirPort Extreme, but some users seem to be able to make this work.
1) Can I see/access USB drives (properly fomatted and visible/accessible in the Finder window) attached to my AirPort Extreme (2nd gen-firmware version 7.6.2)via a powered USB hub?
Probably. Some users find that one powered hub will work for them while another might not. To "see" the drives, you must first click on the AirPort Extreme icon under the SHARED heading in the Finder. Then, if the drives are formatted in Mac OS Extended (Journaled), each drive will appear as a folder. Double click the folder name to mount the drive on the desktop.
2) Can I use my iMac (running Lion 10.7.4) to create a concatenated disk set with USB drives (of varying size) attached to my AirPort Extreme via a powered USB hub?
The drives will all appear as separate drives, which must be accessed separately. If you were thinking of trying to start Time Machine backups on one drive and have them continue automatically on another drive when the first drive is full, that will not work.

HT1998 I have what I believe, though I am not certain, an Airport Extreme 1st generation. My internet speeds on my hardwired pc are running in half and a bit higher on my Mac Pro. Cable claims it is a problem with the router since I can bring the PC speed

Bear with me please as I have never used the community before. I have an Airport Extreme 1st generation at least I think it is a 1st generation. My PC is hardwired and my Mac Pro, obviously wireless. I have 50/8 mbps service but the speeds on my PC run around 20/8 and 30/8 on the Mac. Cable says it is a problem with the airport since my PC speeds rise to 50 when the airport is disconnected. Does anyone know what to do?

The simplest way would be to perform a "soft" reset on the AEBS. This type of reset will temporarily disable all of the AEBS's passwords up to five minutes. This should give you ample time to access the AEBS with the AirPort Utility to change it.
If you don't want to actually change the password, then you can possibly retrieve the password from the OS X Keychain, as follows:
Run the Keychain Access utility found in \Applications\Utilities
In the category column (on the left side of the utilities' window), select "All Items."
In the right column look for your Network Name. It will have a "Kind" of "AirPort network password."
Double-click on your network name listing.
Click on "Show password."
Enter your Mac's administrator's password
Your wireless network's password should now be displayed.

Unable to connect mac OS 10.4 with airport extreme 4th generation

I am setting up an old PowerBook G4 for my nephew. Running Mac OS 10.4.11. I am unable to get the PowerBook G4 to speak to my Airport Extreme 4th generation. Is this an incompatibility issue that cannot be fixed?

I guess it's time to go down to Starbucks and buy an overprised Latte
If the coffee place is running an "open" network that does not use wireless security, the G4 should connnect.
If the coffee place uses WEP 40 or WEP 128 encryption, then the G4 will likely connect as well.
My guess at this point would be that the AirPort Extreme is using WPA2 Security and the G4 operating system...or the wireless card in the G4.....will not support this level of security.
So, although the G4 might be able to handle OS X 10.5.7 or higher, the wireless card may still limit what you can do.
Things might be a whole lot easier....and a lot less expensive than a new wireless card.....if you try a USB wireless adapter on the G4.....assuming that the G4 supports a USB connnection.

Airport extreme 4th generation - self-assigned IP address

2 Airport extreme 4th generation with latest firmware. extented network in bridge mode.
After switching providers, I reset both my airports and set them up new accordingto manual.
Only some devices (less than 50!) at times can't get an IP address.
Error msg: Airport has a self-assigned IP address .......... and will not be able to connect to the internet.
My new provider told me it is an internal probem. Quote: This is an internal issue between your devices and your internal routers. we only gives an address to your router and it is your router that gives your devices an address.
My question is, which part of the manual settings in Airport Utility affect the distribution of internal IP addresses?
or how to change my set-up to avoid the problem I'm experiencing?
thanks a lot.

When in brigde mode your provider has to supply at least one IP address for each devices you want to connect.
Alt. turn bridge mode off in Airport Utilities and let your Base station distribute IP addresses. For that you have to enter two DNS addresses.
HTH.

Airport Extreme (4th generation) and "Wireless Client Mode"

Hello All,
I am using an Airport Extreme (4th generation) and I wonder why in "Wireless Client Mode" I am unable to connect my network using the Ethernet connection.
Basically, what I wish to do is a bridge between a Base Station Wireless N <--> Base Station Wireless N (Airport Extreme) distributing the connection via its integrated Ethernet ports.
Thanks,
Sebastian

I wonder why in "Wireless Client Mode" I am unable to connect my network using the Ethernet connection.
The Ethernet ports are not enabled if you configure the AirPort Extreme to "Join a wireless network". Oddly, the USB port is enabled.
If you have another Apple "n" wireless router as your main base station, you could configure the AirPort Extreme to "Extend a wireless network". This would provide more wireless coverage and enable the Ethernet ports on the device.
Ironically, the less expensive AirPort Express 802.11n will do what you want.
When the Express is is manually configured to "Join a wireless network", there is a special feature to "Enable Ethernet clients", which will activate the Ethernet port.

Airport Extreme 6th generation and Time Warner, Arris modem - no internet on mac

After installing a new Time Warner Arris modem we have encountered the following issues:
Light is green on the airport and everything appears normal
Wifi only works on iPhones, roku, and windows laptops.
Ethernet from airport extreme is also working (xbox one works fine).
Wifi internet does NOT work on Mac computers (we have two in the house both running Yosemite). The light on the airport is green and the macs can connect to wifi but cannot connect to the internet (DNS issue?).
The wifi on my mac yosemite laptop does work on my office wireless and anywhere else but home.
Backstory:
So a few months ago I purchased a brand new 6th generation Airport Extreme 802.11ac. It worked fine with our old generic Time Warner cable modem until we forced to upgrade to a new Arris modem/router combination this weekend to upgrade our internet speeds (I don't recall the model I can get this later). We told TWC that we did not need a router and would prefer to use the Apple router but they said it would work just as before by just plugging it into the ethernet port.
Initially we had network errors and I had to change from NAT to Bridge mode on the airport extreme and this worked for about a day. The next morning I could only get internet and wifi on my iPhone or a windows machine elsewhere in the house.
What I tried (none of these worked):
resetting the router and modem worked briefly but the problem repeated itself a few hours later or after connecting to a different wireless network.
deleting network config files (http://osxdaily.com/2014/10/25/fix-wi-fi-problems-os-x-yosemite/).
deleting the wireless network from saved networks and connecting again.
Again this is a problem with mac laptops ONLY. I have no machines running an older version of OS X so I can't test that easily (I can borrow one from a friend to rule that out). We have 2 Mac computers both running yosemite and both have the same problem. Every other wireless device in the house works like a charm. Any ideas?

(using a White, new Surfboard 6141 and Time Warner as provider)
This is a simple cable modem, that will deliver only one IP address to the AirPort Extreme.
My apple extreme in set in Bridge,(by default it is a 2007 model. Has never been a problem when I used Verizon.
Bridge Mode is not the correct setting for the AirPort Extreme. It needs to be in a Router Mode of DHCP and NAT.
Bridge Mode would have been the correct setting with a Verizon modem/router......but the SB6141 is not a router....it is a simple modem.
You can try to make the settings change to see if that will work, but in most cases when you are making a modem change on a network, it is recommended to first reset the AirPort Extreme back to factory default settings (to wipe older and possibly conflicting settings), and then configure the AirPort to work with the new modem.

Windows 7 conflict with airport express 2nd generation

My airport express (2nd generation) is losing it's wifi connection with my router after being connected for an hour or so. It was worse (happened faster) until I made some setting changes. Here is the current config and purpose of what I am trying to accomplish...
Goal - Connect my son's new gamer computer that is running windows 7 professional to the internet
Config -
1. Airport is set up to connect to an existing wireless network that uses WPA/WPA2 Personal security
2. Ethernet cord is plugged into the ethernet slot in the back of the airport and runs to the ethernet slot on the computer.
Once the connection is lost, all you have to do is unplug and re plug in the airport and the light goes green and all is good for a little bit.
Yes, I have unplugged, disconnected and reconnected the router, too after making changes.
Any help would be greatly appreciated.

iTunes: Troubleshooting AirPlay and AirPlay Mirroring
About AirPlay Mirroring in OS X
For AirPlay Display (video) to work, check if the checkbox at System Preferences -> Displays.
For AirPlay (sound) like iTunes, check if the device shows up...
If you have Firewall turned on the Mac, check if Bonjour ports are open.

Airport Extreme 2nd generation on a roaming network: is it capable of doing this?

Similar Messages

Maybe you are looking for