Airport Extreme 802.11n connectivity issues with Windows Vista

I recently purchased the 802.11n airport exterme base station and set it up using my MacBook Pro laptop. During the configuration process I set the security to be WEP enabled since there are other computers on my network, one of which has only an 802.11b wifi card, that can only accept WEP security protocol. The set up worked great and I was surfing on the internet with my Mac in no time.
When I go to connect to the 802.11n extreme base station with my Windows Vista desktop PC, I cannot get any type of connection. I re-entered the Network SSID to match that on the AE base station and re-entered the WEP enabled password.
Is there a compatibility issue between the Airport Extreme Base Station and Windows Vista? I realize that the base station works on XP based PCs but not sure why it could not work on a Vista machine. Any help anyone can offer would be greatly appreciated.
MacBook Pro Mac OS X (10.4.6) 1.83Ghz Intel Core Duo

Upon further review I determined the flaw with my earlier attempts to set up the airport exterme base station with my winodws vista desktop pc. I realized that I should not use a WEP key but rather a WPA key since the wireless adpater connected to my desktop is a wireless G enabled adapter that can handles WPA and WPA2 security.
Therefore, no issues with Vista and the airport extreme base station. Works great.
MacBook Pro Mac OS X (10.4.6) 1.83Ghz Intel Core Duo

Similar Messages

Apple Airport 802-11n connection problems with Windows 7

I'm basically a MAC user, but my son is trying to get his Windows 7 Toshiba laptop to connect to my Apple 802-11n wifi. It will see the wifi, but when clicked on my network the connection fails before I get to input the password. Yet neighborhood 802-11n connections get to the password screen. The lap[top is a Toshibe satellite L755-S5107 running Windows 7.
I'm not very savvy on PCs, so I don't know where to look for versions of his software et al.
Anyone familiar with such problems?

Toshiba may be doing something different than other manufacturers, so your best bet might be a Toshiba support site.
Official Toshiba Support | Toshiba
Another source that may of some help is the Windows troubleshooting guide for WiFi connections:
Wired and wireless network connection problems in Windows ...
Not sure how much more help that we can provide on an Apple support site for Apple wireless routers.

Airport Extreme 802.11n and WDS with 802.11g express

I have an 802.11n Airport Extreme that I have been using with my AppleTV. I have it set to allow for 802.11b/g, since I have an old Powerbook Titanium that cannot be upgraded.
I recently decided to add my Airport Express 802.11g to the mix to act as a bridge for a remote, wired computer. I did this by enabling WDS on the Extreme/Express.
My question is this: by enabling WDS on the extreme, will the AppleTV still be able to connect at 802.11n speeds, or does it get pulled back to 11g? Is there any way to verify/check this on either the Extreme or the AppleTV?
Thanks,
keith

You can check the connection speed of each wireless client attached to a base station using Airport Utility. Launch Airport Utility, click on the Airport button in the toolbar. On the Summary tab you'll see an item called Wireless clients. It shows you how many wireless client devices are connected to that base station.
Click on the words Wireless Clients and you'll get a graph and a list. The graph shows the signal strength of each client. The list shows the client's wireless MAC, the signal and noise levels and the rate at which each device is communicating. On my Extreme-n base stations, I regularly see rates from 1 to 130 and everything inbetween. It looks like each device runs at it's best rate based on signal strength and error rate.
Assuming you know the MAC of your Apple TV (it's on the serial number label) you can see what wireless data rate it's getting this way.
The thing I've noticed is that my Extreme-g base stations seem to connect to clients at higher average rates than my Extreme-n units. In other words, on the g units I'll see more clients at 54 (the max) or 48 and on the n units just a couple will connect at 130 or 54 but most are at lower rates like 27 or 11 (even 2 or 1), even when they are in the same room as the base station.
I find that very odd and would like to understand it. Anybody have any ideas?

Airport Extreme 802.11n Base Station blocking RealPlayer 11 completely

I am trying to play this radio station (just a brasillian sports channel) on RealPlayer 11:
rtsp://real.rbsonline.com.br/liverbs/*/broadcast/rdgaucha/gaucha.rm
Which is completely blocked on my Airport Extreme 802.11n Base Station with the latest firmware update.
It even blocks when RealPlayer is configured for HTTP only.
I am using it on my iMac which is connected directly via a ethernet cable instead of wifi to the Airport Extreme 802.11n Base Station.
RealPlayer can play it fine when I plug my iMac directly to the cable modem so it proves is the router. I never had RealPlayer issues before when I was using a linksys router.
It does really feel like Apple put an intentional block on RealPlayer to stop competition.
Anyone seen this issue? Guess it is related with the BBC RealPlayer issue.

Fixed myself, problem was because I setup OpenDNS on base station, removed it now works

Speed or Performance Issue with Airport Extreme 802.11n

Background:
Router 1: Linksys Wireless G 2.4GHz Router WRT54G (have been using for 1.5 years)
Router 2: Airport Extreme 802.11n Base Station Model: A1143 (just arrived)
Macs: Intel MacBook Pro & MacBook both Newtwork Adapters upgraded to 802.11 a/b/g/n and verified via "Netwrok Utility". The Netwrok Utility also displays the link speed at 54 mb under interface info. when the Linksys G router is selected and the link speed at 144 mb when the airport extreme n is selected.
Observation & Issue:
Currently, for testing both network routers have been used seperatly (connected directly via the cable modem) and speeds for each latop verified via http://www.speakeasy.net/speedtest/ and normal "human" usage web surfing observations via Safari. Results below:
1. When using the Linksys G router both the MacBook and MacBook Pro appear to be performing well and responsive with little or no wait on graphically/media intense sites such as apple.com
The speakeast.net/speedtest/ (using the NYC hub close by) downoad test displays 8MB to 10MB speeds
2. On the otherhand, when using the Airpot extreme both the MacBook and MacBook Pro appear to be performing slower than usual with higher waits for image and page downloads.
In addition, the speakeast.net/speedtest/ (using the NYC hub close by) downoad test displays 2MB to 3MB speeds. Lower than what we experienced using the older router.
Request for advide or help:
1) Is this normal? Assuming it is not, what esle can I look at that can help me determine the root cause. The Airport Utility does not offer much assistance in this matter.
2) Thus far I have opted to revert back to my Linksys g router. However, before returning the product... any other adivce on a potential miss in the configuration or setup would be of great help.
3) Other's experiencing the same?
MacBook Intel & MacBook Pro Intel Mac OS X (10.4.8) SUing Comcast Cable Modem

Contacted Apple Support (have an AppleCare account) tonight and the issue has been resolved with the caveat that I cannot have a mixed (g & n) radio mode on the same airport extreme base without significant loss of performance. These are the steps I was walked through to resolve my particular case:
1) Verify that your hardware is indeed upgraded to use n (see steps in my original post)
2) Open the AirPort Utility (new program that was installed from the install disc under applications/utility)
3) Click on the Airport Extreme image on the right hand column to open the Airport Extreme settings
4) Select the "Wireless" tab, then "Radio Mode" drop down and select 802.11n only (5 GHz)
5) Select Update to apply new settings.
Results:
When running the speakeasy.net/speedtest I am seeing results that are indeed better. However, the test shows that the top speed lowers a bit and jumps back up unlike when I am on my old g router, which does not have such a jump.
This test is not perfect but a good gauge. If anyone has any other ideas to test performance more accurately, please do let me know.
Note: Only n enabled devices now work with the n router. I will keep my old g router as a backup and for my work pc laptop.
Hope the above helps and thanks.
MacBook Intel & MacBook Pro Intel Mac OS X (10.4.8)

I hope this might interest someone. The situation; 3 floors,I am having trouble with an an Airport Extreme, 802.11n on the top floor and a Mac Pro 3.1 on the bottom floor. Not always but often it has trouble seeing the Airport and making a connection. I h

I'm not sure how to post a message. I hope this might interest someone. The situation; 3 floors,I am having trouble with an an Airport Extreme, 802.11n on the top floor and a Mac Pro 3.1 on the bottom floor. Not always but often it has trouble seeing the Airport and making a connection. I have an older Airport Express, would it help to install it? would it work best if it was installed in the same room? should it be installed half way in between? Get another Extreme? The Mac Book Pro on the middle floor can see 11 networks in the neighbourhood if that might be causing a problem or would if I installed the Express. Thank for your consideration.

Thanks for your time ... I appologize for the font and colour, I compossed the question in pages and failed to notice the font colour as grey ... there are a variety of computers of various ages so I think it is using a setting that allows both 5G and 2.4 ... the connection to the Airport is thru a cable modem and cable does run throuhout the house ... maybe those hard wires would be a place to look at ... do you think that putting the 'Express' on the second floor might help ... thanks again ...

Speed issue with the AirPort Extreme (802.11n)

Hi, I was wondering if anyone could help out with this.
I am the Design Manager and IT Director at a publishing company where we have just upgraded to an AirPort Extreme (802.11n) base station to drive our network. We went this route as all of our machines are Mac Minis with built-in Airport and we were in a situation where re-doing a hardwire on the building was not going to be a possibility due to budget costs.
Our new configuration seems to be running very well and has the following devices connected to the AirPort Extreme:
Linksys Firewall Router (which was used on our old system and was requested by corporate to stay in the lineup to keep the static IP addresses we've already defined for our printers, VPN, etc. intact). The configuration on this part is modem to Linksys router to uplink port on the Airport).
New Panther, Intel based Xserve connected to the Airport's Ethernet port 1.
A 4 port ethernet switch connected to the Airport's Ethernet port 2 which drives four of our HP LaserJet printers.
Ethernet port 3 is not occupied.
All of the ethernet cords connecting our equipment are brand new.
For the most part, everything's been running blazing fast with a remarkable speed increase over our old hardwired setup. However, I've received a few complaints about slow speeds when dragging and dropping and working with files that are stored on our Xserve - we get alot of the "spinning wheel" and the transmission speeds seem very slow.
At present, we have several category 6 ethernet cords on backorder. I was planning on using one to take advantage of the gigabit ethernet capabilities between the Airport and the Xserve (as these are the only two elements of the network that support gigabit ethernet, besides the majority of our Mac Minis. Printers and cable modem are only 10-100 capable, so those will stand as is).
Can anyone tell me if the gigabit ethernet cord will be the solution to this one slow aspect of the new network? Any other settings I could apply to possibly speed up the transmission time when moving files to and from our server? Good news is that every workstation in the house is getting a full 4 bars.
Many thanks!

PS, just wanted to point out that we are also running in bridge mode.
Thanks!

I have a pc running windows 7. I got an Airport Extreme 802.11n Wi-Fi and the printer is now plugged into the Airport. The wireless router works fine but the printer shows as offline in control panel and in word. The printer is a HP LaserJet CP1525nw.

I have a pc running windows 7. I got an Airport Extreme 802.11n Wi-Fi and the printer is now plugged into the Airport. The Airport works fine but the printer shows as offline in control panel and in word. The printer is a HP LaserJet CP1525nw.

+For now I have it set to Share Public IP address - Is this correct for my Network Setup with The Airport Extreme being the only router being used ?+
This would be the correct setting if the AirPort Extreme is connected to a simple modem (one ethernet port).
*Settings I have Enabled*
5 GHz name indicates that you have elected to use the option to assign a separate name to the 5 GHz network. This will allow you to "tell" compatible computers to connect to that network, rather than the slower 2.4 GHz network
Use Wide Channels is recommended for 5 GHz operation.
Interference Robustness often does more harm than good and should not be used unless you know you are in a area with a lot of wireless networks and you feel that your network is experiencing interference issues from a nearby network.

Help needed connecting Iomega Minimax Ext HDD to Airport Extreme 802.11n

Would appreciate if someone can help me with the following task. After researching and trying several things, I have not succeed in resolving the issue.
I want to connect a Iomega MiniMax Ext HDD (for Mac) to my (Airport Extreme 802.11n + Time Capsule) box using the USB port at the back of my Airport Extreme. Then I want to access the Ext HDD wirelessly as a drive on my Macbook (snow leopard OS). I was told this was possible at the Apple Store...but have failed so far.
Any suggestions so far

Hello smitra. Welcome to the Apple Discussions!
The following are the basic steps for sharing an external USB drive attached to either an 802.11n AirPort Extreme Base Station (AEBSn) or a Time Capsule (TC):
o Plug the hard disk into the USB port on the back of the base station.
o Open AirPort Utility, located in the Utilities folder in the Applications folder on a Mac, and in Start > All Programs > AirPort on a computer using Windows
o Select your base station, and then, choose Manual Setup from the Base Station menu.
o Click Disks in the toolbar, and then, click File Sharing.
o Choose “With a disk password,” or “With base station password” if you want to secure the shared disk with a password, or choose “With accounts” if you want to secure the disk using accounts. If you choose to use accounts, click Configure Accounts, click the Add "+" button, and then enter a name and password for each user that will access the disk. For simplicity, I would recommend using the "With a disk password" option.
o Choose “Not allowed,” “Read only,” or “Read and write” to assign guest access to the disk.
o Select the “Share disks over Ethernet WAN port” checkbox if you want to provide remote access to the disk over the WAN port.
You should now be able to find this drive within Finder under the SHARED category.

Not able to see disk connected to AirPort Extreme 802.11n

I just installed my AirPort Extreme 802.11n Wireless Base station. Wireless internet works like a charm, however, I cannot see my external hard disk when it is connected to the base station (amber light blinking and when checking the problem, I am told that "Disk needs repair"). When connecting the hard disk directly to the PC, I have no problem seeing the data. Any tips or tricks out there... ?
AirPort Extreme 802.11n Windows XP

I finally got my 500 GB Western Digital MyBook USB drive to work by reformatting it to HFS+ format.
Of course, before I could do that, I had to copy all my files onto another hard drive. That job took a day to accomplish.
I work with Poser, and have a lot of content installed... We're talking thousands of files.
Once the drive was reformatted to HFS+ format, I copied everything back over. That took another day. Then I connected to the AEBS.
The USB drive was immediately recognized. It was incredibly easy to access the USB drive on my PCs. It required no effort on my part, except to supply the password.
In the end, I've decided this effort is a failure.
The drive is way too slow for my needs. Also, one of my vital Poser utilities (CorrectReference Pro) will not work properly with the USB drive on the AEBS.
I am currently in the process of copying all those files over to two external USB hard drives attached to my other PC.
Then I plan to unmount my 500 GB MyBook drive, and reformat it back to NTFS. I'll let the Notebook PC have it on a direct connection again.
I have a couple "junk" External Hard drives that are 160 GB. Maybe I'll use one of those as an Airport disk...
But I won't be using the Airport disk for anything important. It's too slow.

AirPort Extreme 802.11n Wi-Fi doesn't connect to printer

So, I got the AirPort Extreme 802.11N Wi-Fi connected and working to my cable modem (good times), but now neither computer (PC or Mac) can connect through it to the printer (HP C4280 Aii-in-One) that we connected to the USB port on the back of it.
Any idea what we're doing wrong here? Is there something that needs to be configured within the software of the router?

Work your way through the Apple Troubleshooting Guide to see if that will help get the printer going.
Bear in mind that only the print function will be supported when your device is connected to the USB port on the AirPort Extreme. Scan, copy, fax, maintenance etc. are not supported, so if you need these functions, you will need to connect your all-in-one directly to the computer.
The PC will need to have Bonjour for Windows installed. It's on the CD that came with the AirPort Extreme.

Having a problem in conecting with airport extreme 802.11n wi-fi on ipad2, having a problem in conecting with airport extreme 802.11n wi-fi on ipad2

when i was trying to conect with the airport extreme 802.11n wi-fi on my ipad 2, having problem in my ipad saying that your airport base station does not have a valid IP address. make sure your airport base station is connected to your broadband modem or local network....n also another message is this airport base station doisn't have any DNS server addresses and might have trouble connecting to the internet... bt in laptop can use this internet without any having problem.... so freinds any idia to solve this problem.??

Hi Achan Siro,
Welcome to the Support Communities!
The article below may be able to help you with this issue.
Click on the link to see more details and screenshots.
Resetting an AirPort Base Station or AirPort Time Capsule FAQ
http://support.apple.com/kb/HT3728
Cheers,
- Judy

WDS networking issue - Airport Extreme (802.11n) and remote Airport Express

*Background Info:*
Airport Extreme 802.11n (Fast Ethernet)
Version: 7.2.1
Wireless Mode: Participate in a WDS network (set as main)
Network Name: @Home
Wireless Security: WPA/WPA2 Personal
Channel: 1
Airport Express
Version: 6.3
Wireless Mode: Participate in a WDS network (set as remote)
Network Name: @Home
Wireless Security: WPA/WPA2 Personal
Channel: 1
Radio Mode: 802.11b/g compatible
Connect Using: AirPort (WDS)
Connection Sharing: Off (Bridge Mode)
Issue
Please help as I'm having issues with my WDS network. I've setup using both the wizard and manual and also hard reset on both units to setup again but cannot get them both to communicate to one another. Both units are showing green LED under their configuration. For my last attempt, I've tried adding the Airport ID (MAC) of the Airport Express to the Access Control and also DHCP Reservations on the Airport Extreme but still no luck.
The Airport Express (setup as remote) does not even show up in the Airport Extreme's Summary as Wireless Clients. In the WDS tab, the Airport Extreme is set up as WDS main, Allow wireless clients box checked and WDS Remotes has the Airport Express' AirPort ID in the list. On the Airport Express, WDS is set up as remote, with Allow wireless client box checked and the Airport ID of the Airport Express in the WDS Main.
I can connect clients to both units. Both units are configured using the same Network Name and have the same WPA/WPA2 security key. The Airport Extreme (main) however is connected to my broadband so any devices or clients connected to it are able to get outside. Connected devices or clients are assigned IP address via DHCP with IP 10.0.x.x. If wifi devices or clients connect to the Airport Express (remote) they are assigned a completely different IP addresses 169.254.x.x, they are not able to browse the internet or talk to other clients connected on the 10.0.1.x network. The Internet Connection configuration on the Airport Express (remote) is Connect Using Airport (WDS) and Using DHCP. I've even tried manually and entered the IP address 10.0.1.199 that I had assigned to the Airport Express from the Airport Extreme and Router Address as IP of Airport Extreme (10.0.1.1).
I think I've tried everything but I'm still having this problem. The remote Airport Express is not extending my existing Airport Extreme network. Any ideas???

Christopher,
This may or may not be helpful, or it may be something you've already tried or are aware of so I apologize if that's the case.
I have been researching ways to set up the Dual Band Network supported by the AEBS and came across your post. I've got an AEBS and (2) AirPort Express set-up currently (AEBS is main and the Express are participating in the WDS as remotes) and I'm trying to configure one of the Express to utilize a 802.11b/g compatible network while the AEBS runs a 5Ghz 802.11n Only network.
AAR, since the AirPort Express are 2.4Ghz 802.11b/g ONLY (no support for 802.11n), you have to be sure to set-up your AEBS first and select "802.11n (802.11b/g compatible)" in the Radio Mode drop-down on the AEBS before you attempt to connect an AirPort Express. The AEBS should be set-up as your "WDS main" and the Express should be set-up as a "WDS remote" for the network you established when you set-up the AEBS.
Bottom line here is the Express won't be seen by the AEBS unless the AEBS is 'looking' in the 802.11b/g 2.4Ghz frequency.
Hope this was helpful.

I have a Airport Extreme 802.11n and my T.V. is a panisonic,I keep losing the connection. Anybody have any answers?

I have a Airport Extreme 802.11n and my T.V. is a panisonic,I keep losing the connection. Anybody have any answers?

Plenty of suggestions.. only you can find out which one is correct.
What model AE? What firmware?
Since Panasonic TV is not apple it will use SMB windows type networking.. everything but Apple does.
Are the names in the AE all SMB compatible.. ie short.. max about 20 characters.. no spaces and pure alphanumeric.
Is the security set to WPA2 Personal with a pure alphanumeric password of 10-20 characters.. more is fine if you suffer paranoia but isn't needed.
Fix the wireless channels.. so it doesn't flip flop like a dying fish.
There are only 3 channels for 2.4ghz that do not overlap, 11, 6, 1 although someone suggested 8 works well if you have heaps of interference. If you live in flat/apartment building you have heaps of interference.
Lastly is it stable if the distance is 3M direct line of sight?
If not then get a high power wireless AP and use that instead.

Setting up Time Capsule with existing AirPort Extreme 802.11n and AirPort Express.

I already have and am using an AirPort Extreme 802.11n with an AirPort Express. I want to set up a Time Capsule 802.11n. Which is the best way to configure this?

... Which is the best way to configure this?
The answer depends on what you need the TC to accomplish. If all you need it to do is perform Time Machine backups, simply have it join your existing network in client mode. It would be if it were to connect to your existing router (presumably your Extreme), not through an "extended" wireless network (presumably your Express).
If you need the TC to "extend" your network so as to serve additional wireless clients, you can do that also. Configure it to "extend" the network created by your Extreme.
As you can see it's quite versatile.

Airport Extreme 802.11n connectivity issues with Windows Vista

Similar Messages

Maybe you are looking for