Airport Extreme 802.11n sharing a disk with a -1 on the mount point

First I have to reboot the device once a day because of the disk that disconnect for no reason like many other on the list ever since I upgraded to 7.2.1 but not sure that as to do with this problem.
Here's is the deal, I have an Airport Extreme 802.11n with a 500GB shared on the USB port. I want to use my iPhoto Library on the 500GB. It's about 11GB, I have tranfered the library over and iPhoto is asking to choose the library I want to use. When I try to point it to the 500GB everything is greyed out. When I use a terminal and do a df command to show the mount point on my computer, I get
/Volumes/500GB-1
Why and where the -1 is coming from?
How can I get /Volumes/500GB only?
One thing I have noticed about the -1 is when I loose the disk connection it prompt me to disconnect 500GB-1 but sometime even with a -2 and -3.
Thx!

can I hook up my printer, scanner and external harddrive through a usb hub?
Partially, a large number of USB printers will work with the AirPort Base Stations' USB port, but not all. I suggest that you checkout the following iFelix site to see if your printer is compatible. Similiarly, most external USB hard drives should work as well.
However, devices that rely on two-way communications, like copiers and scanners, won't work when connected to the USB port.

Similar Messages

Airport Extreme 802.11n (4th Generation) vs. MBP 2006. The MBP is losing :(

GRRRRRRRRR— I feel like this is a version of a problem I see repeated here endlessly, but none of the threads I see about it is quite the same, or fixes my problem.      We have a network with:
Airport Extreme 802.11n (4th generation), connected to DSL modem. Firmware 7.5.2
MBP 2006, running OS 10.6.7 ****
MBP 2008, running OS 10.5.x
ipads, iphone, shared printer, drive, etc.
Everything works fine EXCEPT the MBP 2006. It connects to the network, works for a while, and then after a certain amount of time (anywhere between a minute and several hours) it's dropped. The menu bar still shows a connection and full signal, but there's no connection (TCP or afp) and when I launch the Aiport Utility, it just says that no base stations can be found.   The menu bar seems to be lying. Using the menu to turn Airport off and back on (or sleeping the laptop) works to reestablish the connection.
I do not have this problem with the MBP 2006 on other wireless networks (at work, or at my other home in another city). Just with the Airport Extreme
I've tried changing the channels, disabling IPv6 on the laptop and on the Airport Extreme, setting up a manual DHCP address, and changing the setting for "radio mode" of the base station from Automatic to 802.11a/n - 802.11b/g/n.   I also read that there might be troubles with "mixed" networks with both 802.11g and 802.11n, so I upgraded the Airport card in my MBP 2006 to an AirPort Extreme 802.11 a/b/g/n, which made disk sharing much faster when it's working, but didn't put an end to the cut-outs
Hjalp? Why does the Airport Extreme keep dropping my MBP 2006 (or vice versa)? Are there other things I should be changing or disabling?

OK, two possible leads:
1) Using the AirPort Utility, I disabled 802.11n, setting the AirPort Extreme to b/g only. This seemed to help— I didn't fall off the network all afternoon. (Setting it to 'n' only did not work, unfortunately, or else that would have been better, since it would have let me take advantage of the faster speeds for Time Machine to the shared disk)
2) Soon thereafter, for seemingly independent reasons, we starting having trouble with our DSL connection. We reset the AEBS to factor settings, which didn't solve the DSL problem (had to get a Windstream technician out for that), but since that reset, I've been connected with 802.11a and the MBP hasn't fallen off the wireless network once.
We'll see how it holds up, but for now, the recommendation seems to be first to reset the AEBS settings to factory default, and then try disabling 802.11n...

I just purshased AirPort Extreme 802.11n wi-fi I was told to get the step by step direction on the internet and I am not able to find it can you help me

I just purchased AirPort Extreme 802.11n wi-fi I was told to get a step by step direction to install this wi-fi on line but I am not able to find it. can you please help me?
Helen

See this Apple video tutorial.
http://www.apple.com/findouthow/mac/#wirelesssetup
And this Apple doc:
http://manuals.info.apple.com/en_US/airport_extreme_5th_gen_setup.pdf

Connecting AirPort Extreme 802.11n directly to my Verizon FiOS service

I want to connect my new AirPort Extreme 802.11n directly to my Verizon FiOS service. The ActionTec wireless router supplied by Verizon died, and I bought an AirPort Extreme as a replacement. When I configured the AirPort extreme, it would not connect to the internet. I have read some posts here that indicate I plug my AirPort Extreme into the ActionTec and I am OK, however the ActionTec is dead.
Are there settings for the AirPort Extreme that are unique for going straight to the internet? What am I missing? My FiOS connection is an Ethernet connection- not coax.
Here is the interesting thing- I have an old AirPort Extreme (the round cone shaped model) that I plugged into the Verizon FiOS Ethernet connection. Everything works fine- I have a wireless connection to the internet. I didn't set anything. So my assumption is that I can make the new AirPort Extreme work with the Verizon FiOS.
Any help will be greatly appreciated, as I do not know if I have the strength to go through the Verizon help desk.

Good news! My problem was solved by calling Verizon FiOS support. The service tech said an AEBS can connect straight to the FiOS Ethernet connection. He broke the "lease" on my connection, had me connect the cable from the wall to my WAN slot, and then he "leased" my network connection to my AEBS. Works like butter now.
He said that the Verizon FiOS network "leases" the network connections every 24 hours or so, and had I left my AEBS connected to the network, it would have pushed the new setting down to the AEBS.
Thanks for all of the input.

Not able to see disk connected to AirPort Extreme 802.11n

I just installed my AirPort Extreme 802.11n Wireless Base station. Wireless internet works like a charm, however, I cannot see my external hard disk when it is connected to the base station (amber light blinking and when checking the problem, I am told that "Disk needs repair"). When connecting the hard disk directly to the PC, I have no problem seeing the data. Any tips or tricks out there... ?
AirPort Extreme 802.11n Windows XP

I finally got my 500 GB Western Digital MyBook USB drive to work by reformatting it to HFS+ format.
Of course, before I could do that, I had to copy all my files onto another hard drive. That job took a day to accomplish.
I work with Poser, and have a lot of content installed... We're talking thousands of files.
Once the drive was reformatted to HFS+ format, I copied everything back over. That took another day. Then I connected to the AEBS.
The USB drive was immediately recognized. It was incredibly easy to access the USB drive on my PCs. It required no effort on my part, except to supply the password.
In the end, I've decided this effort is a failure.
The drive is way too slow for my needs. Also, one of my vital Poser utilities (CorrectReference Pro) will not work properly with the USB drive on the AEBS.
I am currently in the process of copying all those files over to two external USB hard drives attached to my other PC.
Then I plan to unmount my 500 GB MyBook drive, and reformat it back to NTFS. I'll let the Notebook PC have it on a direct connection again.
I have a couple "junk" External Hard drives that are 160 GB. Maybe I'll use one of those as an Airport disk...
But I won't be using the Airport disk for anything important. It's too slow.

Setting up Time Capsule with existing AirPort Extreme 802.11n and AirPort Express.

I already have and am using an AirPort Extreme 802.11n with an AirPort Express. I want to set up a Time Capsule 802.11n. Which is the best way to configure this?

... Which is the best way to configure this?
The answer depends on what you need the TC to accomplish. If all you need it to do is perform Time Machine backups, simply have it join your existing network in client mode. It would be if it were to connect to your existing router (presumably your Extreme), not through an "extended" wireless network (presumably your Express).
If you need the TC to "extend" your network so as to serve additional wireless clients, you can do that also. Configure it to "extend" the network created by your Extreme.
As you can see it's quite versatile.

I hope this might interest someone. The situation; 3 floors,I am having trouble with an an Airport Extreme, 802.11n on the top floor and a Mac Pro 3.1 on the bottom floor. Not always but often it has trouble seeing the Airport and making a connection. I h

I'm not sure how to post a message. I hope this might interest someone. The situation; 3 floors,I am having trouble with an an Airport Extreme, 802.11n on the top floor and a Mac Pro 3.1 on the bottom floor. Not always but often it has trouble seeing the Airport and making a connection. I have an older Airport Express, would it help to install it? would it work best if it was installed in the same room? should it be installed half way in between? Get another Extreme? The Mac Book Pro on the middle floor can see 11 networks in the neighbourhood if that might be causing a problem or would if I installed the Express. Thank for your consideration.

Thanks for your time ... I appologize for the font and colour, I compossed the question in pages and failed to notice the font colour as grey ... there are a variety of computers of various ages so I think it is using a setting that allows both 5G and 2.4 ... the connection to the Airport is thru a cable modem and cable does run throuhout the house ... maybe those hard wires would be a place to look at ... do you think that putting the 'Express' on the second floor might help ... thanks again ...

I recently installed an Airport Extreme 802.11N that I bought in May 2013. It replaced an Airport Extreme 802.11N that I bought in July 2007. My USB printer (Lexmark E350d) worked fine with the old Airport, but the printer won't work with the new one.

I recently installed an Airport Extreme 802.11N that I bought in May 2013. It replaced an Airport Extreme 802.11N that I bought in July 2007. My USB printer (Lexmark E350d) worked fine with the old Airport, but I'm having trouble with the new one. When I try to print, I get a USB Waiting message on the printer, and when I force a page to print by pressing Go on the printer, I get a page that says ERROR: syntaxerror OFFENDING COMMAND: true. . . .cvt . . . fpgm . . . x . . .lglyf . . . <..J head . . . STACK: / [ -mark- /sfnts I’ve tried shutting down the printer and disconnecting it and the Airport, but that doesn’t help. I reset the settings on the printer. I upgraded the Airport firmware and removed, reinstalled, and upgraded the Lexmark printer driver. After I upgraded the firmware and printer driver, a few pages printed correctly, but then I got the same syntax error page as before. Any suggestions for getting the printer to work correctly?

Use a powered USB hub between the AE and the printer.. the usb port does sometimes have issues.
Try deleting the printer in the Mac and reinstall it.. the change in AE can represent effectively a change of printer.. it is important to make sure that is all up to date.
Beyond that.. USB printers.. ughhh! Consider for two toners you can go and buy a proper network printer.

Speed issue with the AirPort Extreme (802.11n)

Hi, I was wondering if anyone could help out with this.
I am the Design Manager and IT Director at a publishing company where we have just upgraded to an AirPort Extreme (802.11n) base station to drive our network. We went this route as all of our machines are Mac Minis with built-in Airport and we were in a situation where re-doing a hardwire on the building was not going to be a possibility due to budget costs.
Our new configuration seems to be running very well and has the following devices connected to the AirPort Extreme:
Linksys Firewall Router (which was used on our old system and was requested by corporate to stay in the lineup to keep the static IP addresses we've already defined for our printers, VPN, etc. intact). The configuration on this part is modem to Linksys router to uplink port on the Airport).
New Panther, Intel based Xserve connected to the Airport's Ethernet port 1.
A 4 port ethernet switch connected to the Airport's Ethernet port 2 which drives four of our HP LaserJet printers.
Ethernet port 3 is not occupied.
All of the ethernet cords connecting our equipment are brand new.
For the most part, everything's been running blazing fast with a remarkable speed increase over our old hardwired setup. However, I've received a few complaints about slow speeds when dragging and dropping and working with files that are stored on our Xserve - we get alot of the "spinning wheel" and the transmission speeds seem very slow.
At present, we have several category 6 ethernet cords on backorder. I was planning on using one to take advantage of the gigabit ethernet capabilities between the Airport and the Xserve (as these are the only two elements of the network that support gigabit ethernet, besides the majority of our Mac Minis. Printers and cable modem are only 10-100 capable, so those will stand as is).
Can anyone tell me if the gigabit ethernet cord will be the solution to this one slow aspect of the new network? Any other settings I could apply to possibly speed up the transmission time when moving files to and from our server? Good news is that every workstation in the house is getting a full 4 bars.
Many thanks!

PS, just wanted to point out that we are also running in bridge mode.
Thanks!

No Green Light with new AirPort Extreme 802.11n

Bought new AirPort Extreme 802.11n today. DSL works fine with LINKSYS router but only get blinking Amber light with new APE. I am using 10.3.9 so can not use Utility CD as it requires 10.4. Do I have to upgrade system to 10.4 to get APE to work.

Thanks for help. I upgraded to OS X as you all suggested and was able to use AirPort Extreme utility to access web and get the green light. I had to determine how I was connected to internet by DSL provider (PPOE) and needed to insert my mail ID (e-mail address) and my mail password. I was able to verify the PPOE connection by imputting the IP address of the Linksys connection on my browser and going to their web page.
It took me a while but Apple support was available as it was a new purchase and they talked me thru.
JDB

AirPort Extreme 802.11n* Enabler for Mac 4 use with Touch?

Hello,
I have a 2nd Gen Touch with the latest updated software. I use Airport to connect to the internet on my new iMac 24". Will the AirPort Extreme 802.11n* Enabler software now offered in the Apple store($1.99) for Mac improve communications between the Touch and my iMac?
Thanks

Nope. Your touch is still limited to b/g mode wireless. In fact, if you have an all n network, your touch won't even know that it exists.
Most of your Mac to iPod communication is via the USB cable unless you are using Remote or other applications that can move files on and off.
BTW, that software is to enable early intel Macs to use N wireless. If your Mac is relatively new, you won't need it.
Message was edited by: luvlabs

Having a problem in conecting with airport extreme 802.11n wi-fi on ipad2, having a problem in conecting with airport extreme 802.11n wi-fi on ipad2

when i was trying to conect with the airport extreme 802.11n wi-fi on my ipad 2, having problem in my ipad saying that your airport base station does not have a valid IP address. make sure your airport base station is connected to your broadband modem or local network....n also another message is this airport base station doisn't have any DNS server addresses and might have trouble connecting to the internet... bt in laptop can use this internet without any having problem.... so freinds any idia to solve this problem.??

Hi Achan Siro,
Welcome to the Support Communities!
The article below may be able to help you with this issue.
Click on the link to see more details and screenshots.
Resetting an AirPort Base Station or AirPort Time Capsule FAQ
http://support.apple.com/kb/HT3728
Cheers,
- Judy

Airport Extreme 802.11n with Nortel VPN client

Hello,
Has anyone had any experience using the Airport Extreme 802.11n) with a PC (sorry, I have both a PC and a Mac)running the Nortel VPN client?
The new router works perfectly with the Mac but I also need to use the VPN on the PC for certain functions in my work. On my previous router (Dlink DIR625), I had to set a dedicated virtual tunnel to port 9550 to solve this issue. I think this might still be true for the Airport Extreme but I don't see how to do it. Any help would be appreciated. Thanks.

I had the same problem and an apple apple care tech walked me through it yeterday.
Call them, they were great.
JK

Speed or Performance Issue with Airport Extreme 802.11n

Background:
Router 1: Linksys Wireless G 2.4GHz Router WRT54G (have been using for 1.5 years)
Router 2: Airport Extreme 802.11n Base Station Model: A1143 (just arrived)
Macs: Intel MacBook Pro & MacBook both Newtwork Adapters upgraded to 802.11 a/b/g/n and verified via "Netwrok Utility". The Netwrok Utility also displays the link speed at 54 mb under interface info. when the Linksys G router is selected and the link speed at 144 mb when the airport extreme n is selected.
Observation & Issue:
Currently, for testing both network routers have been used seperatly (connected directly via the cable modem) and speeds for each latop verified via http://www.speakeasy.net/speedtest/ and normal "human" usage web surfing observations via Safari. Results below:
1. When using the Linksys G router both the MacBook and MacBook Pro appear to be performing well and responsive with little or no wait on graphically/media intense sites such as apple.com
The speakeast.net/speedtest/ (using the NYC hub close by) downoad test displays 8MB to 10MB speeds
2. On the otherhand, when using the Airpot extreme both the MacBook and MacBook Pro appear to be performing slower than usual with higher waits for image and page downloads.
In addition, the speakeast.net/speedtest/ (using the NYC hub close by) downoad test displays 2MB to 3MB speeds. Lower than what we experienced using the older router.
Request for advide or help:
1) Is this normal? Assuming it is not, what esle can I look at that can help me determine the root cause. The Airport Utility does not offer much assistance in this matter.
2) Thus far I have opted to revert back to my Linksys g router. However, before returning the product... any other adivce on a potential miss in the configuration or setup would be of great help.
3) Other's experiencing the same?
MacBook Intel & MacBook Pro Intel Mac OS X (10.4.8) SUing Comcast Cable Modem

Contacted Apple Support (have an AppleCare account) tonight and the issue has been resolved with the caveat that I cannot have a mixed (g & n) radio mode on the same airport extreme base without significant loss of performance. These are the steps I was walked through to resolve my particular case:
1) Verify that your hardware is indeed upgraded to use n (see steps in my original post)
2) Open the AirPort Utility (new program that was installed from the install disc under applications/utility)
3) Click on the Airport Extreme image on the right hand column to open the Airport Extreme settings
4) Select the "Wireless" tab, then "Radio Mode" drop down and select 802.11n only (5 GHz)
5) Select Update to apply new settings.
Results:
When running the speakeasy.net/speedtest I am seeing results that are indeed better. However, the test shows that the top speed lowers a bit and jumps back up unlike when I am on my old g router, which does not have such a jump.
This test is not perfect but a good gauge. If anyone has any other ideas to test performance more accurately, please do let me know.
Note: Only n enabled devices now work with the n router. I will keep my old g router as a backup and for my work pc laptop.
Hope the above helps and thanks.
MacBook Intel & MacBook Pro Intel Mac OS X (10.4.8)

Help needed connecting Iomega Minimax Ext HDD to Airport Extreme 802.11n

Would appreciate if someone can help me with the following task. After researching and trying several things, I have not succeed in resolving the issue.
I want to connect a Iomega MiniMax Ext HDD (for Mac) to my (Airport Extreme 802.11n + Time Capsule) box using the USB port at the back of my Airport Extreme. Then I want to access the Ext HDD wirelessly as a drive on my Macbook (snow leopard OS). I was told this was possible at the Apple Store...but have failed so far.
Any suggestions so far

Hello smitra. Welcome to the Apple Discussions!
The following are the basic steps for sharing an external USB drive attached to either an 802.11n AirPort Extreme Base Station (AEBSn) or a Time Capsule (TC):
o Plug the hard disk into the USB port on the back of the base station.
o Open AirPort Utility, located in the Utilities folder in the Applications folder on a Mac, and in Start > All Programs > AirPort on a computer using Windows
o Select your base station, and then, choose Manual Setup from the Base Station menu.
o Click Disks in the toolbar, and then, click File Sharing.
o Choose “With a disk password,” or “With base station password” if you want to secure the shared disk with a password, or choose “With accounts” if you want to secure the disk using accounts. If you choose to use accounts, click Configure Accounts, click the Add "+" button, and then enter a name and password for each user that will access the disk. For simplicity, I would recommend using the "With a disk password" option.
o Choose “Not allowed,” “Read only,” or “Read and write” to assign guest access to the disk.
o Select the “Share disks over Ethernet WAN port” checkbox if you want to provide remote access to the disk over the WAN port.
You should now be able to find this drive within Finder under the SHARED category.

Airport Extreme 802.11n sharing a disk with a -1 on the mount point

Similar Messages

Maybe you are looking for