Airport Extreme (802.11n) stays in blinking yellow light mode.

Status indicates WDS Error. Updated to 7.5.2 firmware today, but blinking yellow status light predates this update. Tried rebooting the AE numerous times, leaving it unplugged for 2, 3 5 and 35 minutes, but no change. Should I try a soft or hard reset? What else should I do to get it back on line? Thanks.

We need to do some troubleshooting to find out why the amber light is blinking, and to do that we need to know what operating system you are using on your Mac or PC.
If you have a Mac, and are not sure what operating system it is using, click the Apple icon in the upper left corner of the screen, then click About This Mac. Post back with the OS X Version number that you see there.

Similar Messages

  • AirPort Extreme  802.11n WiFi is blinking amber after changing from cable to DSL.  Everything works well; but light used to be solid green.

    I changed from cable to DSL yesterday.  Technician connected the new modem and all is working excellently, except that the light on my AirPort Extreme which used to be a solid green, is now blinking amber.  I know this is not right, yet everything else is working well.  What's wrong and how can I fix it?

    We need to do some troubleshooting to find out why the amber light is blinking, and to do that we need to know what operating system you are using on your Mac or PC.
    If you have a Mac, and are not sure what operating system it is using, click the Apple icon in the upper left corner of the screen, then click About This Mac. Post back with the OS X Version number that you see there.

  • Unable to connect to an airport extreme 802.11n wifi using airport utility

    I have an Airport Extreme 802.11N Wi-Fi, i connect it to my cable router and i can access the internet using the default setting on the WIFI.
    However the status light is blinking yellow.
    I try to use the Airport utility to connect to the Airport Extreme however i am unable to connect.
    The error message as follows" An error occur while trying to access the apple wireless device. Make sure your network connection is valid and try again"
    I know that i am connect to the Airport Extreme Wi-Fi, i can browse the internet but i need to access the device to change the security and SSID name etc.
    Can anyone help.

    Whats the planned topology supposed to look like. What is the status of each router now?

  • Airport Extreme 802.11n Status Light

    I have an airport extreme (802.11n) and the status light stays green for 5 seconds and turns amber for a fraction of a second then repeats the process. It still gives internet access to computers and remote/relay basestations what can the problem be? And I cant view or change settings using airport utility.

    Oh and also the airport wont hard reset when I press the reset button the status light rapidly flashes amber but when finished restarting it just goes back to blinking amber every 5 seconds

  • Not able to see disk connected to AirPort Extreme 802.11n

    I just installed my AirPort Extreme 802.11n Wireless Base station. Wireless internet works like a charm, however, I cannot see my external hard disk when it is connected to the base station (amber light blinking and when checking the problem, I am told that "Disk needs repair"). When connecting the hard disk directly to the PC, I have no problem seeing the data. Any tips or tricks out there... ?
    AirPort Extreme 802.11n   Windows XP  

    I finally got my 500 GB Western Digital MyBook USB drive to work by reformatting it to HFS+ format.
    Of course, before I could do that, I had to copy all my files onto another hard drive. That job took a day to accomplish.
    I work with Poser, and have a lot of content installed... We're talking thousands of files.
    Once the drive was reformatted to HFS+ format, I copied everything back over. That took another day. Then I connected to the AEBS.
    The USB drive was immediately recognized. It was incredibly easy to access the USB drive on my PCs. It required no effort on my part, except to supply the password.
    In the end, I've decided this effort is a failure.
    The drive is way too slow for my needs. Also, one of my vital Poser utilities (CorrectReference Pro) will not work properly with the USB drive on the AEBS.
    I am currently in the process of copying all those files over to two external USB hard drives attached to my other PC.
    Then I plan to unmount my 500 GB MyBook drive, and reformat it back to NTFS. I'll let the Notebook PC have it on a direct connection again.
    I have a couple "junk" External Hard drives that are 160 GB. Maybe I'll use one of those as an Airport disk...
    But I won't be using the Airport disk for anything important. It's too slow.

  • Speed issue with the AirPort Extreme (802.11n)

    Hi, I was wondering if anyone could help out with this.
    I am the Design Manager and IT Director at a publishing company where we have just upgraded to an AirPort Extreme (802.11n) base station to drive our network. We went this route as all of our machines are Mac Minis with built-in Airport and we were in a situation where re-doing a hardwire on the building was not going to be a possibility due to budget costs.
    Our new configuration seems to be running very well and has the following devices connected to the AirPort Extreme:
    Linksys Firewall Router (which was used on our old system and was requested by corporate to stay in the lineup to keep the static IP addresses we've already defined for our printers, VPN, etc. intact). The configuration on this part is modem to Linksys router to uplink port on the Airport).
    New Panther, Intel based Xserve connected to the Airport's Ethernet port 1.
    A 4 port ethernet switch connected to the Airport's Ethernet port 2 which drives four of our HP LaserJet printers.
    Ethernet port 3 is not occupied.
    All of the ethernet cords connecting our equipment are brand new.
    For the most part, everything's been running blazing fast with a remarkable speed increase over our old hardwired setup. However, I've received a few complaints about slow speeds when dragging and dropping and working with files that are stored on our Xserve - we get alot of the "spinning wheel" and the transmission speeds seem very slow.
    At present, we have several category 6 ethernet cords on backorder. I was planning on using one to take advantage of the gigabit ethernet capabilities between the Airport and the Xserve (as these are the only two elements of the network that support gigabit ethernet, besides the majority of our Mac Minis. Printers and cable modem are only 10-100 capable, so those will stand as is).
    Can anyone tell me if the gigabit ethernet cord will be the solution to this one slow aspect of the new network? Any other settings I could apply to possibly speed up the transmission time when moving files to and from our server? Good news is that every workstation in the house is getting a full 4 bars.
    Many thanks!

    PS, just wanted to point out that we are also running in bridge mode.
    Thanks!

  • No Green Light with new AirPort Extreme 802.11n

    Bought new AirPort Extreme 802.11n today. DSL works fine with LINKSYS router but only get blinking Amber light with new APE. I am using 10.3.9 so can not use Utility CD as it requires 10.4. Do I have to upgrade system to 10.4 to get APE to work.

    Thanks for help. I upgraded to OS X as you all suggested and was able to use AirPort Extreme utility to access web and get the green light. I had to determine how I was connected to internet by DSL provider (PPOE) and needed to insert my mail ID (e-mail address) and my mail password. I was able to verify the PPOE connection by imputting the IP address of the Linksys connection on my browser and going to their web page.
    It took me a while but Apple support was available as it was a new purchase and they talked me thru.
    JDB

  • Extending the range of Airport Extreme 802.11n

    I have 2 Airport Extremes 802.11n. One of the is connected to a DSL modem and it works fine. I have been trying to use the other one to extend the network, but have not been successful.
    I used the exact steps in the manual (Designing Airport Network) published by Apple. The steps I used (several times) were under "Extending the Range of an 802.11n Network".
    Whenever I compete the steps and update the base station, the one that I want to use as the extension (not connected to the internet) disappears from the Airport Utility Application and the base station blinks the orange light. I did reset the base station and tried the guide several times but no success.
    I am doing something wrong or this manual is not complete. Any help from you guys will be most appreciated.
    Thanks!

    I have the same problem. I didn't have this issue with the 802.11g version. Are you using the base station in "bridge" mode? Because when I used the "n" basestation in DHCP/NAT mode, it worked fine. Unfortunately, I needed to change to bridge mode for reliability issues with my service provider.
    Now I have the same issue as you.

  • How do I connect my Airport Extreme 802.11n to Epson 645 Printer?

    I can't figure out how to connect my Airport Extreme 802.11n to my Epson 645 Printer.  Can anyone help me?  Thanks!

    You may want to try reinstalling Mavericks. Airport Utility installed by Mavericks may no longer connect to your older AEBS (though I've not heard that.) Installing the Old AirPort Utility (Version 5.6) on Mountain Lion | frank.is.
    Reinstall Lion, Mountain Lion, or Mavericks
         Boot to the Recovery HD: Restart the computer and after the chime press and hold down the
         COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the computer and
         after the chime press and hold down the OPTION key until the boot manager screen appears.
         Select the Recovery HD and click on the downward pointing arrow button.
         Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu.
         Repair the Hard Drive and Permissions as follows.
    After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
         Reinstall Lion/Mountain Lion, Mavericks: Select ReinstallLion/Mountain Lion, Mavericks from
         the Utilities menu, and click on the Continue button.
         Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is
                    three times faster than wireless.

  • Setting up Time Capsule with existing AirPort Extreme 802.11n and AirPort Express.

    I already have and am using an AirPort Extreme 802.11n with an AirPort Express. I want to set up a Time Capsule 802.11n. Which is the best way to configure this?

    ... Which is the best way to configure this?
    The answer depends on what you need the TC to accomplish. If all you need it to do is perform Time Machine backups, simply have it join your existing network in client mode. It would be if it were to connect to your existing router (presumably your Extreme), not through an "extended" wireless network (presumably your Express).
    If you need the TC to "extend" your network so as to serve additional wireless clients, you can do that also. Configure it to "extend" the network created by your Extreme.
    As you can see it's quite versatile.

  • I have a pc running windows 7.  I got an Airport Extreme 802.11n Wi-Fi and the printer is now plugged into the Airport.  The wireless router works fine but the printer shows as offline in control panel and in word. The printer is a HP LaserJet CP1525nw.

    I have a pc running windows 7.  I got an Airport Extreme 802.11n Wi-Fi and the printer is now plugged into the Airport.  The Airport works fine but the printer shows as offline in control panel and in word. The printer is a HP LaserJet CP1525nw.

    +For now I have it set to Share Public IP address - Is this correct for my Network Setup with The Airport Extreme being the only router being used ?+
    This would be the correct setting if the AirPort Extreme is connected to a simple modem (one ethernet port).
    *Settings I have Enabled*
    5 GHz name indicates that you have elected to use the option to assign a separate name to the 5 GHz network. This will allow you to "tell" compatible computers to connect to that network, rather than the slower 2.4 GHz network
    Use Wide Channels is recommended for 5 GHz operation.
    Interference Robustness often does more harm than good and should not be used unless you know you are in a area with a lot of wireless networks and you feel that your network is experiencing interference issues from a nearby network.

  • Connecting AirPort Express to AirPort Extreme 802.11n

    The following steps helped me set up an AirPort Express base station connected to a set of wireless speakers with my new AirPort Extreme 802.11n base station. I’m posting this because the process was not entirely intuitive, at least not to me.
    I’ll assume you have set up the AP Extreme base station to connect to the internet and run your home network and that you are connected to your wireless network.
    Make sure you set-up the AP Extreme base station to broadcast in 802.11n + 802.11b/g modes, i.e. both at once. You will also have to check he setting that allows the newtork to be extended.
    Reset the AP Express base station so that in runs on the factory defaults by pressing the reset button with a paper clip. Wait for it to completely restart.
    Launch the AirPort Utility. You should see both your AP Extreme and AP Express base stations in the left hand column. Click on the AP Express base station you just reset. When it asks to switch wireless networks do so. Then hit continue.
    On the next screen select “Connect to my current wireless network” option and hit continue.
    On the following screen select the “Extend the range of my AirPort Extreme or AirPort Express network” and hit continue. Do NOT select the “Join my wireless network” option even though it says this is how you connect to wireless speakers. This is the part that was not obvious to me. When I tried this the AirPort Express base station flashed orange and wouldn’t connect despite waiting 30 minutes.
    Chose the network you wish to extend from the drop down menu. My keychain supplied the password for the network.
    Give your base station a name and hit continue.
    Select the main base station in the list provided. This is the one connected to the internet and hit ok.
    The Airport Utility software will configure the network to accept the AirPort Express base station.
    Now all that’s left is to connect your wireless speakers to the AirPort Exppress base station. You can now play music through AirTunes while being connected to your fast 802.11n network.

    I recently setup an Airport Express in conjuction with my Extreme Base Station. I'm not really understanding how this method enables 802.11n connection speeds (via Base Station) to the internet and also allow streaming music through the Express at 802.11b/g. It's my understanding that if you want to be able to access the internet AND stream music at the same time the Express needs to join the network. In order for the Express to join the network (able to recognize the Base Station)...the Base station needs to be changed from 802.11n only to 802.11n (802.11b/g compatable)....which essentially means your connecting to the internet at 802.11b/g. If your wanting to keep 802.11n only on the base station...you would have to create a seperate network via the Express to stream music. What this means is you CANNOT access the internet and stream music at the same time. You would have to manually change Airport in the taskbar to do one or the other.
    Am I off base here? If I am missing something please let me know...because it would be great to be able to connect to the internet at 802.11n only with a multi-case rate set to 23Mbps vs. the 11Mbps (maximum) of the 802.11b/g compatable option.
    I guess what is confusing me is that my setup is basically the same as what was described above..minus having the "Extended Network" being enabled. How does extending the network change things?

  • Help needed connecting Iomega Minimax Ext HDD to Airport Extreme 802.11n

    Would appreciate if someone can help me with the following task. After researching and trying several things, I have not succeed in resolving the issue.
    I want to connect a Iomega MiniMax Ext HDD (for Mac) to my (Airport Extreme 802.11n + Time Capsule) box using the USB port at the back of my Airport Extreme. Then I want to access the Ext HDD wirelessly as a drive on my Macbook (snow leopard OS). I was told this was possible at the Apple Store...but have failed so far.
    Any suggestions so far

    Hello smitra. Welcome to the Apple Discussions!
    The following are the basic steps for sharing an external USB drive attached to either an 802.11n AirPort Extreme Base Station (AEBSn) or a Time Capsule (TC):
    o Plug the hard disk into the USB port on the back of the base station.
    o Open AirPort Utility, located in the Utilities folder in the Applications folder on a Mac, and in Start > All Programs > AirPort on a computer using Windows
    o Select your base station, and then, choose Manual Setup from the Base Station menu.
    o Click Disks in the toolbar, and then, click File Sharing.
    o Choose “With a disk password,” or “With base station password” if you want to secure the shared disk with a password, or choose “With accounts” if you want to secure the disk using accounts. If you choose to use accounts, click Configure Accounts, click the Add "+" button, and then enter a name and password for each user that will access the disk. For simplicity, I would recommend using the "With a disk password" option.
    o Choose “Not allowed,” “Read only,” or “Read and write” to assign guest access to the disk.
    o Select the “Share disks over Ethernet WAN port” checkbox if you want to provide remote access to the disk over the WAN port.
    You should now be able to find this drive within Finder under the SHARED category.

  • To extend AirPort Extreme 802.11n

    Wanting to extend the range of my AirPort Extreme 802.11n (version 7.4.2)
    I have a Airport Express as trial also a 802.11n. AirPort Utility has a lot of trouble finding the Express. When AirPort Utility does find it and I want to set up the Express I have to switch from the Extreme to the Express. Unfortunate side-effect is that AirPort Utility then looses track of the Extreme and I can't "join" the Express as Utility can't find anything to join.
    As I have the Express on trial of a friend I did the normal reset (button for 10 sec) and even the factory reset (unplug, press reset button while plugging in) however I did notice it still had his settings. Changed those but as I said before it seems for AirPort Utility is is either or instead of both.

    Based on your description, it sounds like the AXn is configured to join the wireless network created by the AEBSn ... not extend it.
    The following would be the basic setup steps for extending a wireless network:
    o If practical, place the base stations in near proximity to each other during the setup phase. Once done, move them to their desired locations.
    o Open AirPort Utility and select the base station that will connect to the Internet.
    o Choose Manual Setup from the Base Station menu, or double-click the base station to open the configuration in a separate window. Enter the base station password if necessary.
    o Click AirPort in the toolbar, and then click Wireless.
    o Choose “Create a wireless network” from the Wireless Mode pop-up menu, and then select the “Allow this network to be extended” checkbox.
    o Next, select the base station that will extend this network, and choose Manual Setup from the Base Station menu, or double-click the base station to open its configuration in a separate window. Enter the base station password if necessary.
    o Choose “Extend a wireless network” from the Wireless Mode pop-up menu, and then choose the network you want to extend from the Network Name pop-up menu.
    o Enter the base station network and base station password is necessary.
    o Click Update to update the base station with new network settings.
    (ref: Page 46 of "Designing AirPort Networks Using AirPort Utility.)

  • I hope this might interest someone. The situation; 3 floors,I am having trouble with an an Airport Extreme, 802.11n on the top floor and a Mac Pro 3.1 on the bottom floor. Not always but often it has trouble seeing the Airport and making a connection. I h

    I'm not sure how to post a message. I hope this might interest someone. The situation; 3 floors,I am having trouble with an an Airport Extreme, 802.11n on the top floor and a Mac Pro 3.1 on the bottom floor. Not always but often it has trouble seeing the Airport and making a connection. I have an older Airport Express, would it help to install it? would it work best if it was installed in the same room? should it be installed half way in between? Get another Extreme? The Mac Book Pro on the middle floor can see 11 networks in the neighbourhood if that might be causing a problem or would if I installed the Express. Thank for your consideration.   

    Thanks for your time ... I appologize for the font and colour, I compossed the question in pages and failed to notice the font colour as grey ... there are a variety of computers of various ages so I think it is using a setting that allows both 5G and 2.4 ... the connection to the Airport is thru a cable modem and cable does run throuhout the house ... maybe those hard wires would be a place to look at ... do you think that putting the 'Express' on the second floor might help ... thanks again ...

Maybe you are looking for