Airport Extreme 80211 B/G

I have a 80211 b/g Airport Extreme. Im I able to hook up a USB HD to this model? Or will this work for only the new models with the 802.11 b/g/n?
Thanks

The AirPort Extreme version that you have will support a printer, but not a hard drive.
As you have guessed, the newer "square" version of the AirPort Extreme will support a hard drive.

Similar Messages

Slow Airport Extreme 5th Gen Data Transfer

Airport Extreme Slow Data Transfer
When transferring files between PC – Nas, Nas – PC, & PC – PC my speeds are extremely slow (1.3 – 3.3mbps). Files range in size from 350mbps to 4gb. Here is my set-up:
Acer Aspire 5532 Win 7 x64 (internal 5ghz nic)
Toshiba Toshiba Satellite C655 Ubuntu 12.04 (internal 5ghz nic)
Gateway GT5418E Win 7 x64 (USB 2ghz nic)
Iomega 2TB Nas
Seagate GoFlex Home 3TB Nas
5th Generation Airport Extreme
Firmware Version: 7.6.3
Wireless Security: WPA2 Personal
Channel: 149 (automatic), 11 Automatic
Radio Mode: 80211.n Only (5ghz) – 80211n Only (2.4ghz)
Multicast Rate: High (also tried low and medium)
Use Wide Channels: Checked
2nd Generation Airport Extreme 5ghz extended network
It doesn’t seem to make a difference if I am using the extended network or sitting 5 feet from the primary (either band) with the extended disabled. I ran a LAN Speed test: averaging 12 – 16mbps write and 20+ read. Any advice would be helpful!
Thanks!

Hi madtytan,
Thanks for using Apple Support Communities.
These settings will help ensure maximum performance, security, and reliability when using Wi-Fi.
For more information on this, take a look at this article:
iOS and OS X: Recommended settings for Wi-Fi routers and access points
http://support.apple.com/kb/HT4199
Best of luck,
Mario

Slow Airport Extreme on wifi

I have a new Macbook with a factory installed airport extreme card (80211). It is very slow linking to the internet. It is constantly going in to scanning mode. I have to click on that to turn Airport on and even then it takes forever to have a page download. It has happened in other locations too so I don't think it's my Internet connection....Any ideas?

Steve,
There is no such thing as a "factory installed airport extreme card." I think you intended to say your Macbook has Airport. Can you tell us how you are trying to connect to the Internet? Do you have a wireless router (that is what an Airport Extreme is) and if so what kind?
Airport is Apple's implementation of 802.11X WiFi, however in order to make it work it has to wirelessly connect to WiFi router which is connected to Internet (DSL or Cable) modem.
This link is information on Airport Extreme.
http://store.apple.com/us/product/MB053LL/A?fnode=MTY1NDA0Mg&mco=MjE0NDc3Ng
If you don't have a router connected to your Internet Modem then your Macbook will continue to scan and not connect until it can locate a WiFi router.
Regards,
Roger

What hardware do i need for airport extreme

I have a macbook pro (with intel) and an iMac (with intel); i just ordered an airport extreme base-station. I currently have the old airport which has been working fine but i thought i'd upgrade to something faster. Do i also need to buy an airport extreme card for my computers in order to be able to use the new airport extreme base station? Can i simply download the software that apple is selling for 1.99 to upgrade the capacity my computers already have? I can't find the answer to this anywhere so i'd appreciate some assistance.

You can't upgrade older Macs (including the older Core Duo Intel Macs) though these will still work with the new Airport Extreme just not at n speeds.
The n enabler software for Core 2 Duo Macs does not need to be purchased/downloaded as it comes free with the new Airport Extreme base station.
The Macs which can use the n enabler software are listed on this page.
http://www.apple.com/wireless/80211/
Does my Mac support 802.11n?
These Mac computers support 802.11n in the new AirPort Extreme Base Station using the included enabler software:
iMac with Intel Core 2 Duo (except 17-inch, 1.83GHz iMac)
MacBook with Intel Core 2 Duo
MacBook Pro with Intel Core 2 Duo
Mac Pro with AirPort Extreme card option

Slow wifi on Airport Extreme Extended Network

My network is Time Warner Cable (NYC) wideband cable modem to first generation Time Capsule 80211.n (Speed of wifi is great)
Then I extend the network on the same floor wirelessly using an 80211.n Airport Extreme access point. (The speed of the wifi is still great)
When I extend the network a second time to downstairs - using an 80211.n Airport Extreme access point the speed slows down.
The wireless network remains fast upstairs at the two access points, but internet access at the downstairs access point is very very slow.
- I have all three boxes updated to the latest firmware 7.6
- I have cycled the power so the cable modem is on first and then the time capsule and then the other two Airport Extreme access points
- I have returned the devices to the factory settings and reconfigured from scratch
- I have set up the Time Capsule to only make an 80211.n network
- I have used the default channel settings and also tried individual channels to avoid any interverence. It seems like it makes no difference
- I'm connecting iPads and Mac laptops to the network
QUESTIONS:
- Why is the internet speed plumeting only on the downstairs aiprort extreme?
- The downstairs access point was configured wirelessly and is seen by the upstairs access point. It puts out a full signal, but might it be too far from the original access point to put out fast internet?
- The airport extremes are first generation. They do have 80211.n but might upgrading them speed up the internet access?

- Why is the internet speed plumeting only on the downstairs aiprort extreme?
Think of the 802.11n extended wireless network as a wheel, with the base station being extended at the hub and each of the extending base stations as spokes on that same wheel.
With the extending AirPort Extreme (downstairs) farther from the hub than the other extending AirPort Extreme, you can expect lower bandwidth to be available as the signal quality of the extended Extreme will be much weaker at the location of the downstairs Extreme.
- The downstairs access point was configured wirelessly and is seen by the upstairs access point. It puts out a full signal, but might it be too far from the original access point to put out fast internet?
Correct. However, you may still find that by just making small adjustments to where this extending base station is located, that you may get better bandwidth performance. You can do this by taking SNR measurements with a Mac laptop if you have one available by using the OS X System Profiler utility.
SNR (in dB) = Signal (in dBm) - Noise (in dBm)
ref: Click on the Apple icon on the menu bar > About This Mac > More Info... > Contents > Network > AirPort > Interfaces > en1 > Current Network Information > Find your wireless network > Signal / Noise
While your still in the System Profiler, note the value for Transmit Rate.
These values should be negative numbers. For example, mine currently read: -67 dBm / -95 dBm, with a transmit rate of 27 (Mbps). Plugging in these numbers yield: SNR = -67 - (-95) = 28. My Mac Mini is about four rooms away from my AEBS with about five walls between them. As you can see, the signal is still quite useable ... but the bandwidth is minimal, especially for streaming.
SNR Guideline
40dB+ SNR = Excellent signal
25dB to 40dB SNR = Very good signal
15dB to 25dB SNR = Low signal
10dB to 15dB SNR = Very low signal
5dB to 10dB SNR = No signal
You will want to place the downstairs extending Extreme at a location where the SNR is 25+dB.
- The airport extremes are first generation. They do have 80211.n but might upgrading them speed up the internet access?
Upgrading to the latest generation of AirPort will not affect the Internet speed provided by your ISP. However, the latest generation models do offer better WAN-to-LAN throughput over the earlier generations so theortically, if you use an Internet speed testing program, you should see better results between the test site and your computers.

How do I use my airport extreme with my FIOS router?

How do I use my AirPort Extreme base station with my FIOS Router to extend my network? I have hard disks connected to my AirPort Extreme and would lik to access them.

Probably can't answer all your questions - but.... I use a Linksys (wired and wireless) router as my primary entry point for FIOS. I use a Time Capsule and an Airport Express as a common wireless connection. So I have two visibile wireless networks and use them both depending on where I am in the house. Both the TC and AEx can be seen either wirelessly or wired from the entire network. Note - the Linksys provides all the DHCP - you set the apple routers as "bridge mode."

Help setting up Open DNS with new airport extreme

I cant seem to get Open DNS to work with a new airport extreme. The status says I am not using Open DNS and its not filtering anything. I have followed the exact steps for set up listed on their website, checked the dns settings, cleared both caches and restarted the computer, modem and router with no success. I set the airport up in bridged mode, although I tried the other option under setup, but not sure what I was doing? I picked up this router because I wanted easy set up and the apple store assured me it would work with Open DNS. Oh, and I also downloaded the latest firmware update on the router. Can anyone help me with the settings or what else I need to check?

Sorry, I am not familiar with this product, so I checked online to pick up some information. Here I am referring to the information found here:
http://www.dslreports.com/faq/6096
I found that your device is mentioned as follows in the intro under Section 1 of this document:
The BellSouth supplied Westell 2100, 2200 and 6100 models (Models A90-210030-04, B90-220030-04, and B90-610030-06/C90-610030-06, respectively) share many features and functions.
Next, I am referring to the information under Section 2, under the heading of Standard Default Mode Connection (separate hub or switch present). Unless you have changed the configuration on the Westell, this is how your device is operating. In this mode, the Westell device is acting both as a modem and router in one unit.
So, an attached router (AirPort Extreme) must be configured as a switch to work correctly. That is what Bridge Mode is....the AirPort Extreme is operating as a switch when it is in Bridge Mode (which would be the correct setting to use when the Westell is set to its Standard Default Mode).
Any changes that you want to make regarding DNS settings would need to be made on the Westell device, since it is acting as the main router on your network.
In Bridge Mode, the AirPort Extreme simply passes that information through to its connected devices. You will not be able to make any DNS related changes on the AirPort Extreme since it receives that info from the Westel device. Some service providers force you to use their DNS servers, so you might want to check with Bell South or AT&T for more information in this regard.
If you want to be able to configure the AirPort Extreme as the main router on your network, and instruct it to use the DNS information that you want, you will need to refer to the section under the heading of Bridged Ethernet Mode ( separate router present).
Please note that the first item under this heading specifies that "This is the preferred configuration when using a separate external router..." (which would be the AirPort Extreme in your case)
So, it appears to me that this would be the way that you must reconfigure the Westell device to allow the AirPort Extreme to function as the "main" router on your network. In this type of setup, you will be able to enter the DNS information that you want to use under the setup for the AirPort Extreme and it will act as you instruct.
The AirPort Extreme would not be configured in Bridge Mode for this....it would be configured to "Share a public IP address".
The next item in the article specifies that you "Must use a PPPoE client on the Router." This means that the AirPort Extreme would be configured to Connect Using = PPPoE as follows:
AirPort Utility - Manual Setup
Click the Internet icon
Click the Internet Connection tab
Connect Using = PPPoE
You would enter your user name (probably your email address), password, etc in this area. Leave the Service Area box completely blank. Set Connection to Always On, and Disconnect if Idle to Never
Click Update to save the new settings. Power off the Westell device after this and then restart it so that it will pick up the new information that you have programmed into the AirPort Extreme.
I want to stress that this is how I would try to configure the Westell and AirPort Extreme. But, as I said, have not used a Westell device, so I cannot say that this will work correctly for you.
It might be an excellent idea to contact Bell South or AT&T Support to ask for their opinion on this before you decide to change the configuration of the Westel device and the AirPort Extreme.
This type of thing can be intimidating for users, so you might elect to use the services of someone like the Geek Squad at Best Buy, or a similar service from a local computer firm. Perhaps the Apple store could help as well.
If it is not critical that you use Open DNS, you might want to simply leave things "as is", with the AirPort Extreme in Bridge Mode.

How do I open the same ports on an Airport Extreme Base Station for multiple computers at the same time?

As the title suggests...
I have a mix of five Mac and PC's at home using an Airport Extreme Base Station as the router.   I need many ports opened on the AEBS for all of the computers- not just one computer. (for example: three people want to play TF2 on Steam at the same time; each machine needs the correct ports open on the router).   Port forwarding only allows me to forward a given port to a single IP, yet I need that port open for five differnt IP's, all at the same time.
How do I do that on an AEBS?
In the same way, I have a small office of four iMacs using an old airport with the same exact issue.   I would like to be able to connect to all of them remotely with Apple Remote Desktop, but the port forwarding on the airport only allows a port to forward to a single IP.   I want to be able to tunnel into the office network and log onto any machine behind the Airport extreme... not just a single IP.    I currently have it set up where I can tunnel into the office from my house, I can find the one machine that the port forwarding has been assigned to, I can log on and everything is just fine... with one machine.    How do I open the firewall for the other machines?
TL,DR version: How do you open ports on an Airport Extreme Base Station instead of forwarding ports?   Forwarding ports doesn't work for multiple IP's.

You can open a single or multiple ports to a single device or different ports to different devices, but you cannot open the same port to multiple devices via the AirPort Utility for the Apple routers.

How do I add an airport extreme to a cable modem with only one ethernet port, while keeping that port connected to my Mac?

I have a mac pro connected by ethernet to a cable modem via ethernet. There is only one ethernet port on the modem.
I want to keep the Mac connected via ethernet for speed. Is there a way that I can add an airport extreme to this set up - for my ipad and roku, and for guests to use - or do I need to buy a router to put between the modem and the mac?
If I need a router, what kind?
Thanks.

The modem connects to the WAN "O" port on an AirPort Extreme router.
The Mac Pro connects to one of the three LAN <-> ports on the AirPort Extreme router.
Or if you do not need the ability to connect a hard drive to the USB port on the router, you can save a bit by using an AirPort Express.
The modem connects to the WAN "O" port, the Mac Pro connects to the LAN <-> port
Either the AirPort Extreme router or AirPort Express router will allow up to 50 wireless device to connect.
There are many other wireless modems offered by other manufacturers as well.

Airport Extreme no longer recognizes or provides internet to wired devices

Not sure if it was the power outage or an update that is the problem; but, I had a 5th generation Airport Extreme as the center of my home network with a solid connection to the internet for both my wired and wireless components. A few days ago, after a power flicker (all components on surge protectors) my wireless internet would not stay connected more than 45 seconds before dropping and oddly, none of my wired components we showing up on the network or getting an internet signal from the AEBS. After two hours with my ISP technical support personnel we deduced that the problem was the AEBS and the modem was fine. I bought a new AEBS yesterday (the new long cube one) to use until my appointment to have the 5th gen looked at. Plugged that in and instantly my wireless network came back up - rock solid. However, anything I connect directly to the AEBS via ethernet does not get an internet connection or show up in the network. I searched for two days in these forums for a similar problem - but, have gotten nowhere. I used my wired connections for internet phone service and really need to get this fixed soonest. Much thanks for any help anyone can throw my way.

I would find it odd that you would have a replacement AirPort and still not have Ethernet connectivity ... but, of course, anything is possible. The DHCP service on the AirPort provides IP addresses to both wired and wireless clients by default so it shouldn't work for either if there was something amiss with it.
At this point, I would suggest that you try the following:
Perform a "factory default" reset on the AirPort. After it resets it will default to its "out-of-the-box" configuration which is a wireless Internet router that will broadcast an unsecured wireless network with a Network Name of something like: Apple Network NNNNNN.
Without making any changes to the AirPort, try connecting any of your wired devices to it. If it still does not get the proper IP address and network connectivity I would suggest that you try performing a complete power recycle of your networking hardware. Please check out the following AirPort User Tip for details.

Time machine can no longer see USB drive connected to airport extreme

According to what I read, as of March, a year ago March, with update 7.3.1 Time Machine will see the USB hard drive connected to the Airport Extreme. This was working fine. It no longer does. I had the latest airport extreme software and firmware updates. I tried going back to 7.3.1.
Does any one have any idea how to make Time Machine work again when connected to my airport extreme?

bradleydad wrote:
According to what I read, as of March, a year ago March, with update 7.3.1 Time Machine will see the USB hard drive connected to the Airport Extreme. This was working fine. It no longer does. I had the latest airport extreme software and firmware updates. I tried going back to 7.3.1.
Does any one have any idea how to make Time Machine work again when connected to my airport extreme?
what exactly do you mean when you say that TM doesn't see the drive? do you mean you can not choose it as the destination TM drive in TM system preferences? do you see the airport drive mounted in finder? if yes, connect it directly to your mac and repair the disk (not permissions) with disk utility. then move it back to AEBS. see if that helps. if not try the following terminal command
defaults write com.apple.systempreferences TMShowUnsupportedNetworkVolumes 1
it should not be necessary with drives connected to AEBS but it might work.

USB HDD not ejected properly...no longer recognized by Airport Extreme

I'm hoping someone can help. I'm quite desperate as all of my DVDs are on this drive.
I have a 2 TB WD USB harddrive that I connect to my airport extreme to use as my iTunes storage. Up until 2 days ago there have never been any issues. I was messing around, cleaning up around the router and hard drive and the USB cable was pulled out of the harddrive. Now when I plug the USB cable back into the drive, it is not recognized in the Airport Utility. I installed an older version of Airport Utility and it shows the volume, but I cannot do anything with it. It is also not recognized in finder. If I plug the drive directly into my MBP, it mounts fine and is totally accessible. What could have meesed up with the drive? I have another 1TB drive that I tried and this is recognizable in Airport Utility and finder along with a USB stick I have laying around. It is only the drive that has all my stuff on that is no longer usable.
If anyone has any suggestions I would be very greatful.
For what it's worth, I've tried everything I can find on here and the web short of reformatting the entire drive. I can't do this as I'll lose all my "stuff".
Thanks in advance.
Marc

This is a user to user discussion area. So it is unpredictable as to when someone with a suggestion will respond to your post. An hour in the middle of a work day isn't a long time.
Since the card is recognized, there isn't anything wrong with that side of the card. If the card isn't receiving a signal, either the RF side of the card has failed, the antenna wire isn't connected properly, or the antenna in the PowerBook has failed.

Airport Extreme Printing Problem with HP Deskjet.

Hello ... I wonder if any helpful folks can assist me with my printing problem? I am using Tiger on a new Intel imac with a HP Deskjet 960C. This printer is listed as having the latest drivers included within Tiger and works perfectly when connected via USB so my problem I guess is not with the software....I have disconnected everything and plugged everything back together again. I also deleted the printer from the printer list within the Printer Setup Utility application.... The imac recognisies the printer and upon pressing the print button everything feels as though its just going to work. The blue barber shop scroll appears but the printer fails to kick into gear and I get the big red exclamation mark appearing in the status box .... I would really love to try and sort this annoying error ... Any ideas? Thanks. Book G4 Mac OS X (10.4.4)

Hello jds17. Welcome to the Apple Discussions!
Unfortunately, not all USB printers are compatible with AirPort base stations.
Take a look at one of these iFelix Unofficial AirPort Printer Compatibility links, depending on which AirPort base station you have:
o 802.11g AirPort Extreme Base Station (AEBS) or AirPort Express Base Station (AX)
o 802.11n AirPort Extreme Base Station (AEBSn)
If your printer isn't listed, it doesn't necessarily mean it won't work, but simply that it has not been verified. iFelix also provides the following workaround for printers not on the list that would certainly be worth a try.
Also, you may find the following Apple article helpful.

Internet - AirPort Extreme (b/g) - Time Capsule - File Server

I've got a small office network where files are served off a Mac mini, and iMacs connected via 802.11n wifi to the wired mini via Time Capsule. I have a spare AEBS (b/g) that I was thinking of setting it up for iPhone and guest access of internet. To keep the mini and iMacs secure, the set-up would be:
Internet -> AirPort Extreme (b/g) -> Time Capsule -> Mac mini and iMacs
The only issue I'm contemplating - the slower Ethernet ports on the Extreme - which I don't think is a problem for connecting to the Internet. Is there anything else I should be concerned about regarding network performance?
Thanks in advance for the collective wisdom!
Message was edited by: openarchitecture

That would work. The Ethernet ports on the AirPort Extreme base station (AEBS) is faster than your internet connection so you shouldn't have a problem.

Connecting HDD to Airport Extreme causes orange death light...

I am in a small office network with mix of pc and mac (7 pc's, 1 iMac, 1 wireless iMac, and 3 wireless macbook pro's). Internet connection comes into building directly to airport. Airport then feeds a couple of systems directly and a Dlink 24port ethernet switch which connects all other hardwired network connections.
I just purchased a Seagate Freeagent Desk 1.5TB external USB2 drive to be used as a network storage drive (not with time machine just grabbing and dumping files for interoffice sharing). Removed preloaded software and formatted fat32. Disk will be mounted and recognized when connected to any mac directly. When connected to the usb port on the airport extreme it begins to initialize and then bombs. Airport gives the orange death light and there is no connectivity to the router for all (ie internet connection, etc.) When you unglug the HDD the router reboots and then goes back to green light of peacefulness. What am I missing? Setting? Order of connection? Not hitting it hard enough on the ground with a large 10lb sledge hammer? Help me out...

you may need to restart the AEBSn with the drive plugged in.
since it might have been long since the AEBSn was restarted and anything else attached to it.
or a restore to factory settings...
i know not the best you want to hear, it should just work.
make sure all the AEBSn updates are there...etcetc
i was having this problem the past month or so and it started working again flawlessly after a few restarts.

Airport Extreme 80211 B/G

Similar Messages

Maybe you are looking for