Airport Extreme and adding a USB Hub

I added a Belkin USB Hub to my airport extreme and with my MAC computer it cannot find anything plugged into it. Is there a recommended Hub to use, mine is Belkin?

Welcome to Apple Support Communities
A USB port of the AirPort Extreme supports a hub, always that you plug printers and displays > http://support.apple.com/kb/HT2421
If devices connected to the hub are not recognized, return it and get another hub. There is no hub recommended as all of them should work, but I recommend you to get a USB 2.0 hub

Similar Messages

Airport Extreme and USB/Firewire Combo Hub

This has probably been covered before and I didn't find it. So I apologize...
I bought the new Airport Extreme and a firewire/usb combo hub so that I could connect my external HDs (3 are firewire and 1 is USB) - the USB is the only one that is working....
Any Ideas? (Besides putting the Firewire back on the desk top and sucking it up!)
Thanks,
Tim

I have a related question. I want to buy a triple interface drive (ethernet, USB, Firewire). The plan is to connect the drive an ethernet port on an Airport Extreme. The question is - can I later 'daisychain' on an additional firewire drive?
So the first drive would be connected via ethernet and the second connected to the first via firewire.
Based on Niel's post, I am guessing this won't work. Comments?
Also, are there certain brands that are known to play particularly nicely with Leopard when hooked up as ethernet network drives?

Can I connect a 4 TB USB drive to the airport extreme and use it as a network drive for Time Machine

Can I connect a 4 TB USB drive to the airport extreme and use it as a network drive for Time Machine

Yes, if the drive is formatted in Mac OS Extended (Journaled).
The USB port on the Time Capsule is under powered, so you may need use a powered USB hub with the 4 TB drive...even if it has its own power supply.

My Airport Extreme and Time Capsule both cannot do not mount my Seagate USB external hard.

My Airport Extreme and Time Capsule both cannot do not mount my Seagate USB external hard.
I am running OS 10.7.5
Both the TC and AE are updated to 7.6.1
The Seagate drive in formatted: Journaled HFS+
I tried everything on Apple's Article: HT1331 and the basic reboots and restarts.
"Next"

It sounds like you may be confusing "mount" with "recognize".
Connect the drive to the USB port on the AirPort Extreme
Open Macintosh HD > Applications > Utilities > AirPort Utility
Click on the AirPort Extreme icon, then click Edit
Click the Disks tab
Does the AirPort Extreme "recognize" your hard drive? If yes, it will be displayed in the window.
See example below of a WD 500 GB drive connected to the AirPort Extreme.
If your drive is formatted HFS+ and it does not appear here, then you will almost certainly need to use a powered USB hub with the hard drive.....even if the hard drive has its own power supply. The USB port on the AirPort Extreme and Time Capsule is under powered.
Post back when the drive is "recognized" and we will next "mount" the drive.....although you likely already know how to do this.

I am extending my airport extreme by adding an airport express. I had no problem setting it up and got green lights but now I cannot get on either because it says it is a self assigned IP?

I am extending my airport extreme by adding an airport express. I had no problem setting it up and got green lights but now I cannot get on either because it says it is a self assigned IP?

i am extending my airport extreme by adding an airport express.
Does this mean that you are connecting the AirPort Express to the AirPort Extreme using a wired Ethernet connection....or....are you connecting the AirPort Express to the AirPort Extreme wirelessly?
but now I cannot get on either because it is a self assigned IP?
I suggest that you first concentrate on getting the AirPort Extreme working correctly. Power off the modem and both the Extreme and Express, wait a few minutes, then power up the modem and let it run a few minutes. Then, power up the AirPort Extreme and check the network for proper operation. Leave the AirPort Express off for now. Report on your results.
We need to know what operating system you are using on your Mac or PC in order to provide more troubleshooting help.
If you have a Mac and do not know what operating system you are using, click the Apple icon in the upper left corner of the screen, then click About This Mac. Post back with the OS X version number that you see there.

I have a 1st generation AirPort Extreme and want to create a guest network, can I? If so, how? Can I do this by adding an Airport Express?

I have a 1st generation AirPort Extreme and want to create a guest network, can I? If so, how? Can I do this by adding an Airport Express?

I have a 1st generation AirPort Extreme and want to create a guest network, can I?
This version of the AirPort Extreme does not have guest network capability.
Can I do this by adding an Airport Express?
Why not simply buy a new Airport Express.....which does have main and guest network capability*.....and sell the AirPort Extreme?
* The AirPort Express will need to connect to a simple modem.....not a modem/router or gateway type of device.....for the guest network feature to work correctly.

Printing with a USB printer using Airport Extreme and Vista

I have a airport extreme and it prints fine with all of my Macs.
I bought a VAIO installed with Vista and the lastest service pack. Here is what I have done
* Installed Bonjour Printing software on the Windows Machine
* Installed the print drivers on the Windows Machine
* Bonjour finds the printer and driver without any problem
* When I test the printer will print either one page or half of one page and then I get an error message.
* I enabled the UDP 5353 port in the Firewall
The printer is a Epson Photo R220
I have no problems with the Macintosh works great and I have no problems with the Windows machine connecting to the Airport for internet usage.
If anyone out there has a solution I would very appreciative.
Thanks

No help from the forum. I used Bonjour for Windows.

Cone Airport Extreme and disk sharing

I have the older Extreme base station and want to set up a shared disk. I have it set up to share a printer just fine. I added a usb hub to the station and attached the printer and hard drive.
The airport utility does not have a disk sharing section. Is this possible with this model?

An AirPort Extreme base station without 802.11n capability and any AirPort Express will ignore any USB drive connected to it. Sharing the drive from it isn't possible.
(50843)

Airport Extreme and external HDD time capsule issues

I'm going to try to provide as much information for you so that you can recommend a fix to the problem.
1. I've just become an Apple owner and also purchased Airport Extreme (AE) a Belkin USB (4 port) hub and a Seagate GoFLex, 1.8T external HDD.
2. My system:
Model Name: MacBook Pro
Model Identifier: MacBookPro8,2
Processor Name: Intel Core i7
Processor Speed: 2.2 GHz
Number of Processors: 1
Total Number of Cores: 4
L2 Cache (per Core): 256 KB
L3 Cache: 6 MB
Memory: 4 GB
Boot ROM Version: MBP81.0047.B04
SMC Version (system): 1.69f1
Serial Number (system): XXXXXXXXXXXXXXXXXXXXX
Hardware UUID: XXXXXXXXXXXXXXXXXXXXXXXXXXXXX
Sudden Motion Sensor:
State: Enabled
3. Attached to the HUB is HP 6280 printer and the Seagate 1.8T GoFlex external HDD.
4. I did configure the AE and my internet connect is working spot on.
5. The AE recognizes the HP6280 printer and it works fine.
Here's where the problem starts:
When I open Time Machine to configure Time Capsule I cannot get the AE to add thGoFlex external HDD drive to the WiFi.
Do I have reset the AE to default setting and start all over? Is there another way to add the GoFlex to the AE so it recognizes it; then, I can run the set up program for the time machine and have wireless capability.

New2Guitar wrote:
When I open Time Machine to configure Time Capsule I cannot get the AE to add thGoFlex external HDD drive to the WiFi.
I hate to have to tell you this, but backing-up with Time Machine software via an Airport Extreme is "iffy" and +*not supported by Apple.+* See [Using Time Machine with an Airport Extreme Air Disk|http://web.me.com/pondini/Time_Machine/Airport.html] (or use the link in *User Tips* at the top of this forum).
By the way, a +Time Capsule+ is a wireless router, similar to an Airport Extreme, but a bit larger and with a hard drive built-in, and Time Machine backups to it are supported. In fact, that's the main thing the Time Capsule was designed for. See: http://store.apple.com/us/product/MC344LL/A/Time-Capsule-2TB?fnode=MTY1NDA0Mg&mc o=MTMzNzU2MjI

How do you connect Airport Extreme and share HP Photosmart 3210 Printer?

Hello,
I have a Mac and PC Network composed of:
iMac 24'' Leopard 10.5.2 (main computer)
2 PC Fujitsu Pentium 4 on Windows XP
2 PC HP Pentium 4 on Windows XP
my network/connections are done via Airport Extreme and 2 hubs (other devices connected to the network like Wii, XBox etc.)
I am trying to share my HP Photosmart 3210 using the USB connector on Airport Extreme but I am experiencing strange problems while printing from the iMac. I can print an e-mail or a "light" document however if I want to print a Mac powerpoint (Mac office) largest document, the problem starts after the second or 3rd page, the printer goes on pause at the middle of the page and the interface indicates "problem communicating with the printer" or something like that.....unique possibility is to turn the printer off and start again but the problem persists. However, it seems that the printer works ok from the PC's.
I have tried to install the latest versin of the HP driver on my iMac but while configuring, the printer doesn't appear....I have checked on the printer settings and the IP address is 0.0.0.0.
I am now thinking about connecting the Printer via one of the Ethernet port on Airport Extreme.
Questions:
1. Any help on the above ? Any advice ?
2. Is it normal to have no IP address on the printer when connected via USB on Airport Extreme ?
3. Why HP config doesn't recognize the printer on the network ?
4. Why does it work from the PCs and not from the iMac and why does it print light documents and not big ones ? Is this a memory7buffer problem on the printer ? What can I do if this is the case ?
5. On the Airport Extreme Utility, do I need to share the printer via "Bonjour"?
6. I am willing to plug an extrenal HD on the Airport Express USB port. Is it possible to put first a multi USB port on the Airport Extreme USB or is it going to cause problems ?
Thanks a lot for your help.
P.
Message was edited by: vador300
Message was edited by: vador300
Message was edited by: vador300
Message was edited by: vador300

NCBob, Welcome to the discussion area!
If I understand correctly you are replacing the Linksys. It should be a simple replacement. Connect the cable modem to the WAN port on the AirPort Extreme base station (AEBS). Connect your Ethernet devices (including the switch) to the AEBS LAN ports.

Time Machine and 4 Port USB Hub

I am trying to use a 1Tb external drive with Time Machine. I have connected the external drive via a 4 port, externally powered USB hub. The hub is then connected to my Airport Extreme.
The problem is the drive will not mount using the hub. Yet, when I plug the drive directly into my MacBook Pro, it shows up just fine in Disk Utilities, and Time Machine wants to know if I would like to use it as a backup disk.
I'd really like to use this drive wirelessly to back up multiple Macs via my Airport Extreme. The odd thing is that I have a printer connected to the same hub and I share it using the Airport Extreme and it works just fine. I just don't understand why the hub is making a difference.
- Do I need a different hub?
- Are hubs a problem with this kind of set up?
And I'd like to sneak in a follow-up question if I may:
- Can I use the same hard drive with Time Machine to back up 2 or 3 Macs?
Thanks in advance!

My thanks to you and Tesserax for the quick and helpful responses! You were right about the 1Tb drive not being supported wirelessly through my Airport Extreme. The drive showed up under "disk" in Time Machines preferences, but the drive would not mount. The minute I put the printer directly into the Extreme and connected the drive to the MacBook Pro via the hub, it showed up in Disk Utilities and was ready to format. And, now Time Machine is asking me if I want to use it as my Backup Disk. Cool! Now the only question is if I can share the disk so that my other Macs can also take advantage of this new Backup Disk. We'll see..
Thanks again so much!!

Airport Extreme and My Book Home Edition 1TB external drive

Connecting the My Book Drive to Airport Extreme and entering passcode for A.E. causes it to turn off. Is this normal? Western Digital also claims that this drive cannot be shared this way and that their network drive needs to be used. Any thoughts on this? Is there a list of compatible drives?
thanks in advance.

Sounds like I have a similar problem, although I am able to browse the network drive for a bit before it decides to disconnect. To reconnect I have to reset the AE. My drive is a seagate 'desktop', not sure if there is a compatible list, but I have tried others which did the same thing. Now I've decided to just use a USB hub to connect all my drives to, not ideal but it is simple

I'm having a hard time setting up my external hard from with my AirPort Extreme and Time Machine Backups.

I have been using a Mac Mini with an external hard and Time Machine. I bought an Airport Extreme and have had problem setting up the hard drive using the USB port on the Airport Extreme. I also just recently bought a Mac Book Air and hope to have both computers back up to the external hard drive using Time Machine and Airport Extreme. I have been using the optical drive from the Mac mini to load programs into the Mac Book Air. I think I'm just getting confused in Finder. I am just not seeing the hard drive. I ended up plugging the hard drive back into the Mac Mini and that is work fine again. How do I setting the external hard drive up to the AirPort Extreme and use for both computers? Or at least to start with the Mac mini.

It's critical to understand that Time Machine (TM) stores backups differently between local and network drives. That would mean the TM backup on your locally attached USB hard drive will not be directly useable when it is connected to the AirPort Extreme Base Station (AEBS). There is a way to copy a local version to a network version, but it is not fool-proof. When you do connect this drive and point TM to it, TM will start a brand new backup, leaving your existing backup as is.
If your current backup is critical to you, you may want to consider getting a second USB drive to attach to the Extreme and use your existing one as a backup ... or use TM's multi-backup process to backup to more than one destination drive alternatively.
So, at this point, you may want to make a decision on how you want to go forward to help provide a solution for you.
To directly answer your question, when you go to select a destination for a Time Machine backup, the drive(s) that show up under "Backup Disks" are those that TM already recognizes and has backed up to. Those listed under "Available Disks" are drives (either local or on the network) that TM can back up to.

Airport Extreme and external HDD - cannot be found under Windows (XP/Vista)

Dear All,
I am about to loose it. I have an Airport Extreme (7.4.2), most recent version (802.11n)connected to my cable modem. Attached is a 2TB HFS+ Formated HDD. I have a number of machines. My primary machine is a Dell XPS with Vista and MacDrive installed.
Now: On my AirPort utilities through the Dell the different HDD's connected via USB (I have tried half a dozen) are all visible. They are shared and I have tried all options, e.g. "with Disk Password" etc, tried to give and deny access to guests etc.
I have tried various things incl. switching off the firewall has not been a success either. I am basically ready to buy a Mac now, but I am worried that the problem will persist for all my Windows based PC's.
Who can help with a step to step guide? tried the TCP/IP settings on the XP machine as well (entering the IP address of both Airport Extreme and Express).

Hi!
I've got the same problem as of Friday when I upgraded my Notebook from XP to Windows 7.
It does not recognize the HDD anymore, neither on the Windows7 Notebook nor on 2 different XP- PC's.
I disabled the password functionality and removed the HDD several times, no change.
When I look to the data volumes overview in the system settings, all internal HDD's and the CD partition of the Toshiba drive are shown. The HDD partition of the drive is shown as "non allocated".
Is there any workaround to get access to the data????
Best regards,
Helmut

Airport Extreme and 500 Gig drive

I have 27 MacBook's in a mobile lab connected to a brand new Airport Extreme. The Airport Extreme serves up a 500 Gig drive that (during my tests) I can connect to flawlessly.
My laptops all have the user, "Student." In the dock on the Student account, I have a folder that is located on the AP Extreme hard drive that I want my students to access.
During my instruction to the students, I had them all click the folder in their docks so they could see the contents of said folder. There's only 6 sub folders, so it's not like a heavy load showing previews or anything.
20 computers connected to the disk successfully (there's no password to see the contents) and 7 didn't. The 7 that didn't asked for a password to the disk when there isn't one.
So I took one of the non-working computers from a student and tried to open a file in MS Word. I clicked on the base station in the list of available servers (on the left side of the open sheet). A message popped up on the screen that said I'd reached the maximum number of clients that can access that resource. ...so I opened up the Airport Utility and counted the computers connected to the base station. 27.
I've looked high and low for documentation from Apple that states that only 20 computers can use the "Air Disk" simultaneously. All of their documents say that 50 devices can connect to the base station wirelessly. Nothing about a lesser number connecting to the hard drive.
I really want to have made a mistake somewhere in my setup. Though it seems to be idiot proof.
Can anyone confirm or deny my findings? Or can someone point out some documentation that specifically says otherwise? And if so, how do I make this work?!
My intention was to keep the storage mobile with the lab and not have to put it on my server as the wired network is already substantially loaded down with other stuff. If I have to move it to my server, then that means quite a bit of work re-setting up all the laptops. It'd also chap my hide as the Airport Extreme advertises that it can handle 50.
Help!
-Graham
Message was edited by: gracoat

I did install the disk utility. How do I go about using the disk utility to set up the Hard Drive?
AirPort: How to mount an AirPort Extreme USB hard disk volume in Mac OS X and Windows
Should I install Bonjour for Windows? If so, where can I get it?
Only if you want to access a shared USB printer connected to the AirPort. You can get it here: Bonjour for Windows 1.0.4
Not sure what the drive is formatted in.
The AirPort Extreme (802.11n) supports USB storage devices that have a block size of 512 bytes, and are formatted as Mac OS Extended (HFS-plus), FAT16, or FAT32. It will NOT work with NTFS-formatted volumes.
(ref: AirPort Extreme (802.11n): USB storage device supported formats and protocols

Airport Extreme and adding a USB Hub

Similar Messages

Maybe you are looking for