AirPort Extreme and AirPort Time Capsule not working

So heres the situation: I have 1 airport extreme in the house and another in the office separate from the house. The cable modem connects to the aiport express in the house through ehternet. An ethernet chord goes from the Aiport Extreme from in the house to the office in the back yard.
Decided to update my airport extremes with the new tall ones. Bought the normal one for the house and got the Airport Extreme Time capsule for the office.
But nothing works. Reseted the device, unpluged the modems power and cables and still nothing ... just blinks yellow
I feel like the NEW Aiport Extremes are not talking to the modem ... theres some diconnection between the airports and the modem.
So there both sitting on my desk until i can figure out what the problem is.
The modem is provided from Time Warner, Los Angeles area. Its maybe 1.5 to 2 years old
Any thoughts or suggestions would be much apprecaited, thanks!

The cable modem remembers your old AirPort Extreme and it will not associate with the new AirPort Extreme until it....the modem....is completely reset to the point where it has forgotten your old AirPort Extreme.
Power off the modem completely by pulling the power plug from the back of the device
Leave it off at least 30 minutes. longer will not hurt at all.
Power up the new AirPort Extreme for a few minutes
Hold in the reset button on the Extreme firmly for 10 seconds and release
Allow a full minute for the AirPort Extreme to restart
Now power off the AirPort Extreme
After the modem power down period is done, connect an Ethernet cable from the modem to the WAN "O" Port on the AirPort Extreme
Power up the modem and let it run for 10 minutes by itself
Power up the AirPort Extreme and let it run a few minutes
Now try to set up the AirPort Extreme using AirPort Utility
Post back on your progress and we will get the new Time Capsule set up next.

Similar Messages

Airport Extreme and a Time Capsule - config recommendations?

Hi!
So I find myself (in a fortunate position?!) with a new Airport Extreme and a Time Capsule.
I have very few requirements - I would like to be able to connect to the Internet wirelessly, and I'd like to be able to backup a couple of Macs using Time Machine (also wirelessly). I realise that the TC can provide me with that functionality nice and easily, but since I have an AE and a TC, I figure it would be good to make use of both, and so I wanted to ask if anyone had any recommendations for a useful configuration?
I think there are 2 basic options I could make use of (have I missed any?!):
1) Use AE as base station and connect the TC to it as an external HD
2) Use AE as base station and also make TC available for back up wirelessly
Does anyone have any thoughts on the above? If you'd recommend 2), what would be your suggested approach as I think I'm right in saying that 2) could be done in several ways? Roaming? WDS? Just setup TC as a stand-alone wireless box with no internet connection? (does this latter approach mean I could connect to the internet and backup at the same time - I'm guessing not?)
If 1) is the way to go, is it just a case of putting an ethernet cable between the 2 boxes?
Any thoughts would be hugely appreciated!
Many thanks

I would use the Time Capsule as the wireless base station connected to the modem. Then I'd use the Airport Extreme to extend the network or to create a roaming network (ethernet cable betwee the units), whichever worked best in the premises. Naturally, Time Capsule would be used for backups of all machines equipped with Time Machine. Have never hooked up any Apple equipment but from my understanding of it, this is what I'd try.

Using an Airport Extreme and a Time Capsule at the same time

Guys I have had an Airport Extreme and a Time Capsule running together for nearly a year now and over the last few days the TC has been behaving badly. I changed its settings and now I'm in a mess. No, I can't remember the previous settings
Does anyone have a definitive list of the settings I need please? I have an ethernet cable modem, and the Airport Extreme is plugged into that as the main router. Two computers and the Time Capsule are plugged into the Airport Extreme using ethernet. The Time Capsule at the moment is just used as a network drive for Time Machine, but at some point I want to move it, with a long ethernet cable, and use it for extending the wifi in the house.
1. Should I connect the TC using its WAN port or one of the other ethernet ports? At present it's one of the other ones.
2. What TC settings should I use to have it function purely as a hard drive? At the moment there's some kind of conflict and my internet connection drops every 30 minutes.
3. Then later, what settings will I need to get the ethernet connected TC to extend the range of my wifi?
I read the Apple doc about WDS and tried setting the TC up that way. Then I discovered there is no WDS option in the AE Wireless settings. Only "Create a wireless network" or "extend a wireless network". The same setting on the TC has these options: "Create a wireless network" "Participate in a WDS network" or "extend a wireless network". Both devices have firmware 7.5.2. It didn't work with only the TC set for WDS, of course, but after that I can't get it back the way it was - which wasn't reliable anyway
Any help in exactly what the Wireless and Internet settings should be would be massively useful. Thanks!

If you use the extreme as a router then the tc should be connected via its wan port to one of the lan ports on the extreme. Tc should be set up in bridge mode. Basically you could set it up to create another wireless network beside the one created by the extreme. There is no need to use WDS or extend the other network.
Use the same SSID and password for both machines. Computers will connect to the strongest signal.

If I have an airport extreme and a time capsule is it possible for seamless switching between the 2 when a signal is weak or drops Main reason is as I move from my first floor to my attic office and would like to place one (airport extreme)downstairs and

If I have an airport extreme and a time capsule is it possible for seamless switching between the 2 when a signal is weak or drops
Main reason is as I move from my first floor to my attic office and would like to place one (airport extreme)downstairs and time capsule upstairs to get complete coverage

In theory, yes. If you configure the two base station into either an extended or roaming network configuration, you should be able to walk a laptop between routers and the laptop should attempt to connect/reconnect to the base station providing the stronger signal ... but, in reality, this is not always 100% true.

Airport extreme and original Time Capsule

I currently own an original Time Capsule. I am considering purchasing a new Airport Extreme and connecting the two together. I would like to be able to use all the Ethernet ports on both, but the wireless on the new extreme. What would be the best way to connect them with my cable modem?
Billy

You can elect to connect either the Time Capsule (TC) or the new AirPort Extreme Base Station (AEBSn) directly to the modem.
If you desire to get use of the maximum number of Ethernet ports on the AEBSn, then I would suggest connecting the TC to the modem. Also, note that you can always add an Ethernet switch or two to either router as well to expand the number of available Ethernet ports for wired clients.

How does one sync the new time capsule with the old airport extreme and airport express in order to extend range?

How does one sync the new time capsule with the old airport extreme and airport express in order to extend range?

Thanks for the additional information.
Unfortunately, the AirPort Utility application in the Lion and Mountain Lion operating systems, which is used to configure the new Time Capsule does not support the older versions of the products that you have.
Even if it did, there are no settings on the older AirPorts to "Extend a wireless network", so they are not compatible with the new Time Capsule if you intend to extend the network only using wireless connections.
If you have the ability to connect each AirPort to the Time Capsule using a permanent wired Ethernet cable connection, it might be possible to use a complicated workaround to install an older version of AirPort Utility to configure the older AirPorts to work with the new Time Capsule.
If you have another Mac there that is using the Leopard or Snow Leoapard operating system, things would likely be simpler. I have not done this type of procedure to mix a new Time Capsule with older AirPorts, so I would not be able to say whether this would work or not.

How to Set Up Time Capsule With Airport Extreme and Airport Express

Just got a new 1TB Time Capsule. I want it to be the main base station for my network. I already have a network set up with an older Airport Extreme base station and an Airport Express to extend it. I am thinking that rather than setting up the Time Capsule to "join" the old network, the best approach is to disconnect the Airport Extreme and Airport Express and reset them. Then set up the Time Capsule as a brand new network and bring the reset Aiport Extreme and Express onto the new network as if my original network never existed.
Is that the right approach or am I complicating it? Can I just join the Time Capsule to the existing network and still make it the main base station for the network?

evelK wrote:
Just got a new 1TB Time Capsule. I want it to be the main base station for my network. I already have a network set up with an older Airport Extreme base station and an Airport Express to extend it. I am thinking that rather than setting up the Time Capsule to "join" the old network, the best approach is to disconnect the Airport Extreme and Airport Express and reset them. Then set up the Time Capsule as a brand new network and bring the reset Aiport Extreme and Express onto the new network as if my original network never existed.
Is that the right approach or am I complicating it? Can I just join the Time Capsule to the existing network and still make it the main base station for the network?
I'd first use AirPort Utility to "Save a Copy As" of your AirPort Extreme settings. Then disconnect it, connect the Time Capsule in its place, and use AirPort Utility's "Import" function to read those settings. (Both of those functions are under AirPort Utility's "File" menu.) You may have to adjust a few settings. Once you have the Time Capsule working as you want, you can reconfigure your AirPort Extreme unit as you wish.

Internet - AirPort Extreme (b/g) - Time Capsule - File Server

I've got a small office network where files are served off a Mac mini, and iMacs connected via 802.11n wifi to the wired mini via Time Capsule. I have a spare AEBS (b/g) that I was thinking of setting it up for iPhone and guest access of internet. To keep the mini and iMacs secure, the set-up would be:
Internet -> AirPort Extreme (b/g) -> Time Capsule -> Mac mini and iMacs
The only issue I'm contemplating - the slower Ethernet ports on the Extreme - which I don't think is a problem for connecting to the Internet. Is there anything else I should be concerned about regarding network performance?
Thanks in advance for the collective wisdom!
Message was edited by: openarchitecture

That would work. The Ethernet ports on the AirPort Extreme base station (AEBS) is faster than your internet connection so you shouldn't have a problem.

What is the best way to hookup my airport extreme with my time capsule ?

what is the best way to hookup my airport extreme with my time capsule ?

It sounds like you have the AirPort Extreme configured as the "main" router on your network.
If that is the case, connect an Ethernet cable from one of the LAN <-> ports on the AirPort Extreme to the WAN "O" port on the Time Capsule
Power up the Time Capsule
Connect another spare Ethernet cable from your Mac to one of the LAN <-> ports on the Time Capsule
Open Macintosh HD > Applications > Utilities > AirPort Utility
Click on the Time Capsule, then click Manual Setup
Click the Wireless tab below the row of icons and make sure that the setting for Wireless Mode = Off
Click the Internet icon, the click the Internet tab
Insure that the setting for Connect Using = Ethernet
Insure that the setting for Connection Sharing = Off (Bridge Mode)
Click the Update button at the lower right of the window and wait a full minute for the Time Capsule to restart
Then power cycle the entire network by powering everything off....order of power down does not matter
Wait a minute
Power up the modem first, and let it run a few minutes by itself
Power up the AirPort Extreme next and let it run a full minute
Power up the Time Capsule next and let it run a full minute
Keep starting devices one at a time about a minute apart until the entire network is back up
You will need to reset the backup path from your Mac to the Time Capsule to get backups going again
Open System Preference (gear icon on the dock)
Open Time Machine
Click Select Disk
Click the Time Capsule to highlight it
Click Use for Backups or Use Disk and backups should begin again in a few minutes
If you do not want to leave the Mac connected to the Time Capsule by Ethernet, remove the Ethernet cable from the Mac to the Time Capsule, then log on to the AirPort Extreme wireless network

AirPort Extreme with 3T time capsule file security question

Right now I am using a MacMini with an external HD as a file server. I'm thinking g of using the new AirPort Extreme with 3T time capsule to do the same tho g (while also extended my wifi reach).
With the Mac mini I have fine control over who gets to see and do what to which folders and files. It seems that with the AirPort Extreme thee is no notion of permissions or access control -- if you can get on the wireless you can access the files. That is extremely insecure.
Is my understanding correct? Is there no way to secure files hosted on an AirPort Extreme so only certain users can access them??
- john

Are there any instructions for how to format and set HFS+ user permissions on the AP Extreme's HDD?
For the formatting part, you will need to temporarily connect the drive to your Mac, and then, use the Disk Utility (a part of the OS X operating system) to partition and format the drive. You should find this utility in the \Applications\Utilities folder. For HFS+, choose "Mac OS Extended (Journaled)" for the Format option.
For assigning user permissions using accounts, you will need to use the AirPort Utility.
Run the AirPort Utility
Select the Extreme, and then, click on Edit.
Select the Disks tab.
Select the HDD in the Partitions window.
Choose "With accounts" as the Secure Shared Disks option.
Click on the "+" button to add user accounts.
For each account desired, enter the Account Name, Password, and File Sharing Access type.
Click Save.
Click Update to write the new configuration information to the base station and wait for the station to restart.

Airport Extreme and Airport Express conflict and failure

I spent 2.5 hours on the phone with Apple and still could not get my Airport Extreme and Airport Express to function. My Apple TV failed as well:
* Connected AEX through Airport Utility to internet. Airport Utility replaced my old configuration on my LinkSystem router. Green light.
* Checked Apple TV. No connection available. Unplugged cable modem, waited 1 minute and tried again. Apple TV connected. No problem.
* Flashing amber light on Airport Express for Airtunes. Does not show up in wireless device list. I call Apple.
* Reset Express. Still no signal. Connect via Ethernet cable. Reconfigure. Green Light. Music works.
* Check internet connection, in order. Apple TV fails. No connection to server.
* Apple TV reset. No connection. No wireless network found.
* Reset Airport Express. Reconfigure channel specifications. No connection with ATV or Airport Express.
* Disconnect Airport Express. Reconfigure. With ATV disconnected I get Airport Express back. Green light but this time no music. Remote speakers appear on itunes, but no music is transmitted.
* Did a total wireless reset on Extreme, and now both Express and ATV are not working.
Frustrated and dissapointed I disconnected everything put back my 5 year old Linksys router and within 15 seconds both ATV and Airport Express worked flawlessly.
How can this happen? What is wrong with this device? It is my second one in a week. The first one made no wireless connection to my Mac at all.
After sulking for hours I tried again, this time leaving the Express out of the equation and reconfiguring the ATV to take over airtunes. After a reset it did fine. Now I have a pure n signal running at 5hz. ATV works again. So does internet.
Any suggestions? Is there something I did not try?
I tried the Firewall trick, the accept all incoming connections trick, the disabling of the iv6 trick, the join a wireless connection trick, and everything else Apple Care could think of.

Maybe I was not clear enough on my post and configurations,
I had a Linksys before I purchased the airport extreme. My airport express joined the Linksys network for the purpose of airtunes. This worked flawlessly from day one.
Airport Extreme asked in the utility to take over an existing network or replace a router. If you chose this option it adopts all passwords, wpa/2 configurations for security and such.
I chose this option thinking that since it is an apple product it would take over everything and work. My airport express had origianlly been set to join my old Linksys network. Since the airport extreme took over this configuration it should work.
Apple stated many times that there seemed to be a conflict and kept asking me about the placement of my airport extreme.
My Linksys was never part of a bridge or a network within a network. It was removed before the Extreme was ever turned on.
After all the problems and hours of trying with Apple, i find it funny that all I had to do to restore eveything was plug my old Linksys back in and conect all the cables, and bam....it worked.
So what is wrong with the airport extreme, or is there something wrong with itunes 8 and its interface with the express? For whatever reason the extreme cannot make the express and my ATV work at the same time.

HT4628 Intermittent reception when streaming music via Airport Extreme and Airport Express to powered speakers. Is this a problem with the Extreme?

i get intermittent reception when I stream music from I Tunes via Airport Extreme and Airport Express to powered speakers. I Tunes continues to play uninterupted on the Mac. The problem does not lie with the Express as it occurs on both of my 2 Express at the same time. is this a problem with the Extreme?

Well, repying to my own post... Might have found the solution: I tried to do the same with a Macbook Pro 2010 using the very same setup. And it worked perfectly! No freeze, no nothing.
One explanation I see:
my iMac is dating back to May 2007, a Core 2 Duo 2,16Ghz with 2 Go of RAM.
So the computer's characteristics (or the Wifi component or the combination of all of this) might be not robust enough to allow streaming to those 2 devices...
Anyone's got anything to add?

How do airport extreme and airport express routers connect to modems?

I've heard that airport extreme and airport express are wifi routers, not modems. if they are routers, they need to connect to my modem. Do they connect using a wire or wirelessly?

It must be connected to your modem with an Ethernet cable.

Difference between Airport Extreme and Airport Express

What is the difference between Airport Extreme and Airport Express? My son is home from college and would like to use his Macbook for an online class. So I need a wireless router and I would also like to be able to play our iTunes over multiple speaker locations with my home stereo. Which one of these could accomplish this. Thanks in advance.

If you can use just one device to both set up a WiFi network and connect to your stereo you have to use an Airport Express. If you have to use separate devices, for instance because your internet connection device and your stereo are not in the same location, you have to use an Express to stream to and you can use either an Express or an Extreme to set up the WiFi.
By the way you have to use an Express for each stereo you would like to connect.

I m using apple mac pc, when we start windows 7 , apple mouse doesn't work properly it take to much time to gain signals from the pc and many times it not work but when we use mac it moves fastly and works properly. please suggest me. thanks ravi

i m using apple mac pc, when we start windows 7 , apple mouse doesn't work properly it take to much time to gain signals from the pc and many times it not work but when we use mac it moves fastly and works properly. please suggest me.
thanks
ravi
<Email removed by Host>

sounds more like Bluetooth rather than moue, but w/o knowing w/o posting mac model type/year we... will... not... know... what you have
All computers are personal computers, a PC though is also "non-Apple" in common usage.
Mac also is platform and OS.
Very confused reading what you are trying to tell us.

I recently bought iphone6, My imessage and face time is not working and still it charged me for normal text message multiple times and still not able to authorise the usage. Let me know how I can start using the same.

I recently bought iphone6, My imessage and face time is not working and still it charged me for normal text message multiple times and still not able to authorise the usage. Let me know how I can start using the same.

Hello vinay34,
If you are having issues with activating your Apple ID for FaceTime and iMessage, then take a look at the article below to get it sorted out. Make sure that you have the Date and Time set to Automatic as well as any other steps listed in the article.
iOS: Troubleshooting FaceTime and iMessage activation
http://support.apple.com/en-us/ts4268
Regards,
-Norm G.

AirPort Extreme and AirPort Time Capsule not working

Similar Messages

Maybe you are looking for