Airport extreme and HDD and windows 7 file sharing, Airport extreme and HDD and windows 7 file sharing

Hi there I simply could not launch files sharing at home using airport extreme.

The disk must be formatted HFS+ ie the standard Mac format or it has to be FAT32.. people mention FAT16 but lets face it.. no one is going to go back that far.
NTFS is not readable.. Strongly recommend using HFS+ so format the disk on a Mac .. once plugged into the AE you can access it from windows over network.

Similar Messages

Setup Airport Extreme for the home wireless - MacBook Air, Pro, and iPad connect just fine. Wireless will not work to Windows 7 and Vista machines - network seen, tries to connect, but fails after entering WPA key.

Can't get Windows Vista or Windows 7 laptops to access internet via Airport Extreme. Works fine with security on MacBook Air, MacBook Pro, and iPad. Brand new Airport, bought today. Windows machines worked fine with existing, relatively modern Cisco home router. The Windows machines see the wireless network, prompt for password, and then cannot connect. Have tried all sorts of things with Windows machines, deleted existing networks, etc. even tried guest login with no security on the Airport - no luck. Windows XP machine directly (wire) connected works fine. Magic Jack works OK. Light is green on the front.

Thank you very much for your help @Sunshyn2005!!!!! I think we're good to go now!

Can I save windows 7 file into Airport Extreme's USB HDD

Hi,
I have one AirPort Extreme connected with a G-Technology 2 TB G drive using USB port. I have a new Windows 7 computer connected to the AirPort using ethernet cable but I cannot find the G-Technology drive in my Windows 7 explorer.
Some internet sites mention Windows NTFS format is not supported in this type of setup. Could someone please confirm this?
Thanks
Jason

Some internet sites mention Windows NTFS format is not supported in this type of setup. Could someone please confirm this
Confirmed In addition, Apple's support document confirms as well that formats of NTFS and exFAT are not supported with the AirPort Extreme.
AirPort base stations: About USB disks - Apple Support
Mac OS Extended (Journaled), also known as HFS+ is supported, as well as FAT16 and FAT32.

I want to share files between my MacBook Pro and G5, I am using an AirPort

I want to share files between my MacBook Pro and G5, I am using an AirPort Extreme Base Station. I can see the MacBook Pro on the G5 and vice versa, I have file sharing turned on both, as well as Screen Sharing. I currently am sharing using Target Disk Mode, I want to know what other wireless options are available to me?
I want to have the 2 computers able to see each other and be able to share files be drag and dropping, I also have another G4 on using Tiger I want to be a part of this happy Apple sharing family. Can someone please tell me how to accomplish my goal?
Thanks in advance for reading and replying to my post,
Sebastian

The mac help is: Finder window/Help/Mac Help. It provides answers to a lot of common questions, including file sharing.
As for the ethernet cable, you can either buy another one (inexpensive and available in many places including Walmart), or just unplug it from your modem temporarily and plug it back in when you're done.
As for Target disk mode, take a look at this Apple article:
http://docs.info.apple.com/article.html?artnum=58583
Apple online support pages are also a great way to find out how to do things.
As I mentioned, I prefer using the ethernet/file sharing method if I need to copy a lot of files; however, there is another way around if you have an external drive and just want to copy one or two files. Just plug the external into one computer, copy the file onto it, unplug, plug into the other computer and copy.

Can i connect to a HDD/printer on my Windows through my AirPort Extreme?

I have a Windows XP running machine, and i was wondering if i could set my external hard disk/printer to my AirPort Extreme and then use it for storage/printing. Not only with files from my Mac, but also with files from my Windows.
*My Windows is not a laptop, and is connected to the web through a kabel.*
Is it possible, and how ?

If the HDD is formatted HFS+ or FAT/FAT32, then yes. If the printer is one of those supported, then yes. You need to set up both devices via AirPort Utility. Check the setup guide to the Extreme.
http://www.apple.com/support/airport

Windows laptops wireless access to the Internet and not to any of my files?

TC late 2008. I want to give Windows laptops wireless access to the Internet and not to any of my files? I have tried to locate "Guest" accounts in my Airport Utility with no luck and I do not understand my options. Example: Could I add a Linksys Wireless-G Cable Gateway router before or after my TC and not have a security problem?

Merlin42 wrote:
TC late 2008. I want to give Windows laptops wireless access to the Internet and not to any of my files? I have tried to locate "Guest" accounts in my Airport Utility with no luck
Welcome to Apple's discussion groups.
Guest networking requires a "simultaneous dual-band" AirPort Extreme or Time Capsule. Those weren't introduced until 2009.
Are the files you want to protect on your Time Capsule or on your Mac? You can protect files on your Time Capsule with a password. In AirPort Utility look at the Disks panel, File Sharing tab.

Can I create separate folders to save media on my Airport Time Capsule? Issue is I have a 256GB HDD Mac Pro Retina which is almost full. TC will only take backup of my HDD. So where would I save my photos and videos from my iPhone and iPad?

Can I create separate folders to save media on my Airport Time Capsule? Issue is I have a 256GB HDD Mac Pro Retina which is almost full. TC will only take backup of my HDD. So where would I save my photos and videos from my iPhone and iPad?

It is a hard one.. laptops with small drives are a pain.
What you need is a home media server.
Some people use a PC running itunes for cost.. but that is nothing like as good as using a Mac mini.. they make great little HTPC device.. you can plug in large hard disks and store all your files and media. And share it with the network.. Read up apple's instructions on home sharing.
https://www.apple.com/au/support/homesharing/
For cost you can buy a mini from 2011 or 2012.. I would not recommend earlier ones.. the advantage of 2012 is they have USB3 ports. But you will pay more for them.. new mini is not as useful.. they have soldered in memory and you cannot upgrade.. the old mini was the most easily modified mac in the whole range. Uses little power and can be bought for a $300US for a good one second hand.. maybe less.

I just purchased a new airport extreme 802.11ac I set it up and runs fine when i put my mac to sleep i come back and it can not find my airport i have to restart

I PURCHASED THE NEW AIRPORT EXTREME 802.11AC I SET IT UP AFTER I PUT MY MAC TO SLEEP I COME BACK AND IT SAYS CAN NOT FIND AIRPORT EXTREME I HAVE TO RESTART AND IT FINDS IT.

Try the following, in order, until (hopefully) resolved:
1a. Delete Preferred Network(s)
System Preferences > Network > Wi-Fi > Advanced > Wi-Fi tab
Under "Preferred Networks," delete the network(s) you regularly use from the list.
1b. Delete AirPort Keychain Entries
Launch the "Keychain Access" application located in Applications/Utilties.
In the windows on the left side: Select login for Keychains and "All Items" for Category.
Click on the "Kind" filter at the top, and look for any "AirPort network password" entries...and delete them.
1c. Add Preferred Network(s)
System Preferences > Network > Wi-Fi > Advanced > Wi-Fi tab
Add the preferred network(s) using the "+" button.
Restart or log out then back in.
2. Move System Configuration Files
(Note: You will have to reestablish your network connections settings.)
Go to /Library/Preferences
Move the SystemConfiguration folder to the desktop.
Restart your Mac. (Note: OS X will rebuild the files that are now sitting on your desktop. If this doesn't resolve the issue, you can move the folder back to it's original location.)

New help with my mac air and airport extreme time capsule dont know how to save to time capsule and use as a external hd

new help with my mac air and airport extreme time capsule dont know how to save to time capsule and use as a external hd would like 2 store my home videos and pictures on the time machine (ONLY) as the MAC AIR has storage space limited space please help. THANK YOU.

See the info here about sharing or using the TC for data.
Q3 http://pondini.org/TM/Time_Capsule.html
It is extremely important you realise.. the Time Capsule was never designed for this.
It is a backup target for Time Machine.. that is the software on the computer that does backups.. it has no direct connection to the Time Capsule.
It has no ability to back itself up.. unlike all other NAS in the market. It is therefore likely one day you will lose all your files unless you seriously work out how to backup.
The TC is slow to spin up the hard disk and fast to spin down. iTunes and iPhoto will continually lose connection to their respective libraries.
iPhoto in particular is easy to corrupt when you move photos over wireless into the library.. once corrupted all is corrupt. A single photo will ruin it all.. so backup is utterly essential.
Time Machine cannot do backups of network drives. ie the TC. You will need a different backup software like CCC. You will then need another target to backup to..

How do i use file sharing with my microsoft pc and mac book?

I have a windows vista pc that my daughter uses and I have a macbook pro and we want to use file sharing for our itunes libararys. We connect to internet with my time capsule. I have both computers itunes file sharing turned on but I can't seem to be able to see them on the network. can someone give me some pointers on how to make this work. thanks

The best way I know is to sign up for iTunes Match. All your music is stored in the cloud and can be accessed by up to 10 devices.

I used a partitioned HDD for time machine, using a partition already containing other data files. I am now no longer able to view that partition in Finder. Disk Utility shows it in grey and "not mounted". Any suggestions of how to access the files?

I used a partitioned HDD for time machine, using a partition already containing other data files. I am now no longer able to view that partition in Finder. Disk Utility shows it in grey and "not mounted". Any suggestions of how to access the files? Does using time machine mean that that partition is no longer able to be used as it used to be?
HDD is a Toshiba 1TB, partitioned into two 500GB partitions.
OS X version 10.9.2

Yes, sharing a TM disk is a bad idea, and disks are cheap enough so that you don't need to.
Now
Have you tried to repair the disk yet

Connecting DVR to Airport Extreme for remote viewing of my home 16 camera system. I have tried for 2 days and still stuck. I have secured a dyndns account and have had no luck for 2 days. A detailed list for an amateur would be much appreciated.

I have been trying for 2 days to connect my home camera dvr to the internet through my Airport Extreme. I have read several previous posts on this topic and have not been able to get this completed. I secured a Dyndns account and registered a host domain. I am not clear on which ip address to use and really which is which. Seems like the ip address for the router is different from the ip address that showed up when I secured my dyndns host name. I used the one that was listed on the signup that staed " your ip address is". I have read up on port forwarding and watched UTube and still no luck. Can someone walk me through a steo by step process on how to get this completed? I want to be able to watch my cameras from my iphone, ipad, macbook pro and the internet. I do have a manual that came with the DVR but it seems everything is setup for Windows and a different router, seems like the AE router had different settings. I can usually figure these things out eventually but I am really stuck this time. Any help at all would be greatly appreciated. Thank you in advance for any help you can offer.

Have you had any luck? I am currently attempting to do the same thing and running into similar issues.

I installed the latest version of iTunes (10.6.3.25) on a new Windows 7 PC. I can see ahred libraries on Shared but can't import as the line containing the Settings and Import buttons does not display. Any suggestions?

To move the iTunes library to this new computer I switched on Home Sharing and can see the other libraries on my home network. If I select tracks from a Shared library I can't import them as the strip containing "Show: All Items" and the "Settings" and "Import" buttons, does not display at the bottom of the screen. Goes straight from the list of tracks to the strip with Playlist icons and xxxx items, tttttt total time, yyyy GB.
Any suggestions for making the Import button appear?

I hvae the EXACT same issue
I built a new computer which is EXTREMELY fast overclocked i7 ect and.. ITUNES DOESNT WORK
I click on itunes which ive uninstalled and reinstalled and reset the winsock AND seen if there were any errors AAAAAAND ive check the Hkey to make sure bonjur was the only one in there which it is and all that happens is my cpu goes to 25% and i cant do anything except go into the task manager and close it! ANYTHING with itunes (everything else is premium speed).
what do i do
windows 7 64 bit

Partitioning previously used Windows NT File System for use with Mac and PC

With reference to this thread I found when searching for a solution: Can Windows NT File System(NTFS) format external hard drive work on iMac?
Below is the comment which led to me creating this new thread.
"rkaufmann87Sep 8, 2014 8:26 AM Re: Can Windows NT File System(NTFS) format external hard drive work on iMac?
in response to djj19
djj19 wrote:
Hi there,
I am about to follow your advice also for the same issue, the worry I have is that when I select partition 1, it says "To erase and partition the selected disk..." and so I am worried that if I do this it will erase the current contents of the hard disk drive (which were copied there from PCs in previous use).
If so, is there a way to use the hard disk drive with a mac without erasing the contents?
Thanks
Your case is different and NO do not partition the EHD yet unless you are prepared to completely erase your PC data. Before progressing though, do you intend to share the EHD with a PC and your Mac? If so this is not advisable but it is possible, however you will need to compromise. Please answer that question first and then we can proceed with some advice.
BTW it's generally not a good idea to ask a question in a thread that has already been answered, particularly one that is 3+ years old! In such a case it's normally better to create your own thread. "
The answer to the question in the above comment is that ideally I would like to use with both Mac and PC, why is this not advisable?
Please discuss my best options. I am wondering if I could transfer the current contents of the disk drive elsewhere, partition (which would erase) the disk drive, then put back the contents along with the new files which I have been trying to put on in the first place?
If this were to work would I then be tied down to only using this disk drive with a Mac?
Thank you.
Message was edited by: djj19

Ideally it is best to have seperate (discreet) EHD's for a PC and Mac due to their differences in HD formatting. However, this is not always feasable but there are alternative solutions availble. Among those are:
Creating and useing a Dropbox account that can be shared by PCs, Macs, IOS and Android devices. Dropbox allows for 2GB of free storage and additional storage is available for a small monthly fee.
Another possiblity is formating an EHD so that it may be shared by both a PC and Mac, this format is FAT 32. The downside of doing this is the size of the files written to the HD are limited to 4GB.

File Server For Both Mac OSX and Windows?

Hello All,
With HP discontinuing theier HP Server line, I've been browsing around for quite some time at a good box to use as a file server. My windows Home server is about to die i feel, and most PC based servers seem just as pricey as me acquiring a Mac Pro Server with Two 1TB Hard Drives and using OSX Lison Server.
However, before I take that plunge I was really wondering if anyone had had any success or stories that they can share about using a Lion Server with windows 7 PC's.
I use a MAC, but everyone else here uses windows. On my the home server box we bascially store all of our digital photographs, personal files and such as a backup. Granted the Apple time machines and mac mini's can be used as the same but you loose the redundant hard drives and stability of comintuing to upgrade if you run out of space.
So I'm hoping that its positive and pretty much flawless where the Mac Pro with Lion Server could just save and serve files galore without slow down or problems. With my past mac experience that's usually not the case. I just want to replace that box, have a new box that can store files off of the independent machiens with a here or there additional backup on it as needed.
The other plus if I take this plunge is I have a Mac Pro box for greater functionality at home over my Macbook Pro! So yeah, a little perk for me...
Thanks in advance for any news you can help or offer me... I know I'm probably asking something that a ton of others may have alredy asked and sorry for the duplication if thats the case

Mac OS X Server can do all that.
You can keep All the user accounts on the Server, or you can just use it for File Sharing. Does Windows SMB or Apple File System sharing without issue. Disk Utility can create Mirrored RAIDs right out of the box, that expensive RAID card is only needed for RAID 5.
I run a Server at home like a School Server with ALL User files on the Server (you log on at any Mac and your files appear, because they are on the Server). User files are on a pair of Mirrored RAID drives, and I use Time Machine to automatically back up all the User Files on the Server once an hour. Gigabit Ethernet Switches provide "Hard Drive-like" file access.

Sharing a Printer between XP and Windows 7 computers on a Wireless Network

Does anyone know if you can share a printer on a home network between a windows 7 and an XP SP3 computer?
I had a wireless netowork set up at home with an XP desktop hardwired to a cable modem and a printer with USB connection. I also had an XP laptop with wireless connection to the Internet. I was able to share files between the two compters and remotely connect to the printer (a recently purchased HP Photosmart C4600 series) from the laptop. Everything was fine until I had to replace the desktop.
I replaced the desktop with a laptop running windows 7. The first problem I had was the new laptop would not connect to the Internet through the existing newtork - neither hardwired or wireless. The problem turned out to be my existing router so I replaced it and the new laptop now connects to the Internet. I set up a new network.
The problem I am having is remotely connecting to the printer with the XP laptop. I have the printer connected to the windows 7 laptop via USB (it is not a wireless printer) and have gone through and set both computers to the same workgroup, turned on file and printer sharing and have tried everything I have read on the microsoft forums including turning on UDP and TCP ports. I turned off firewalls and uninstalled CA security software to eliminate any potential unseen conflicts. I even tired connecting the printer to the XP thinking windows 7 might be "smarter" than XP and I could print remotely from the windows 7 computer. That didn't work either.
I can see the XP computer and access shared folders from the windows 7 computer and vice versa. If I physically connect the XP laptop to the printer via USB I can print so I know the drivers are OK.
The printer icon appears when I bring up the Printers and Faxes window on the XP computer and I am able to view the queue and even change options when I go into Properties. It shows it is selected as the default.
When I try to print remotely from the XP computer I get a message "Windows cannot print due to a problem with the current priter setup" - then it lists 3 thing s to try which I have done. I also went through the XP printer troubleshooter program which was a dead end.
HELP!

If networking isn't working out for you, you may want to try out a swtich. Best Buy sells one by IOGEAR that allows for two USB connections to tie into one computer. So long as windows 7 can either download its own driver for the printer for basic features, or if you want to download canon's driver this solution will work. The only draw back is having to bring the laptop near the printer when you need to print.
IOGEAR SWITCH
MX860 Drivers and Support Page
My opinions do not in any way shape or form represent Best Buy's Official decisions.

Airport extreme and HDD and windows 7 file sharing, Airport extreme and HDD and windows 7 file sharing

Similar Messages

Maybe you are looking for