Airport Extreme and its software.

Greetings,
Does the software for Airport Extreme need to be installed on all the Macs on the network. I other words I have two iMacs and a MacBook Pro. Do I need to install the software on each Mac? Also, on the network are two PCs. Do I need to install the Airport Extreme on the PCs also that will be on the same network?
I hope you understand this question.
Thanks in advance for your help and support.
Leigh

apple_d, Welcome to the discussion area!
Can I (or should I) install the software for AE on my main IMac and will it have the same authority to modify AE if necessary or does the MacBook have unique authority over AEBS since this was used to setup initially?
Any computer with AirPort Utility installed can access and modify the settings of the AirPort Extreme base station (AEBS).
Your iMac probably already has AirPort Utility installed. The only reason you would need to install it from the disc is if you have a very recent AEBS.

Similar Messages

New Airport Extreme and iPhone Issues

I've had the networking day from ****. I previously had a 3rd Gen Time Capsule at our restaurant, connected to a Cisco 26port gigabit POE switch and Comcast digital voice and internet. Over the past few days, employees have reported trouble accessing the the Wifi network. After several restarts and firmware upgrades (including the dreaded "firmware problem" to fine update), nothing worked. I changed channels, back to auto, back to specific channels, back to auto. Made open guest networks. Nothing worked consistently. My iPhone might connect and my friend's might not. Nor his laptop consistently. Our Axis network cameras might take a bit extra time to connect. All quite random and quite frustrating.
So I swap out an older Airport Extreme (4th gen I believe) using the same configuration as the TC (Time Capsule). It works fine, except for the last port not working as expected. No matter, I plug the mac mini into the Cisco switch and off we go. Nevertheless, I'm still told we are suffering random Wifi issues. So I buy a brand new AE (5th gen) today to replace that one. Should work like a charm I thought. Right....
Several hours later, I finally have the new AE working, but only after doing several hard resets/factory restores, the works. For some reason, the mac mini could not successfully update any of the connected AEs - whether connected directly into the same AE, or if the Mini was connected to the switch. Nothing worked. Every time I tried to update the AE, it would hang and force me to unplug and plug it back in. It would also never save setting changes. I finally resorted to a friend's macbook to be able to restore it successfully. And once that worked, the mini was able to update the AE flawlessly. Our Point of Sales (POS) machines connect fine, our cameras connect fine, wifi printer connects, and the mini connects, and everything has internet.
Except my iPhone 5. Of course. It gets a signal fine (full bars). It gets an IP address. But I can't surf the web. Or download email. Or iMessages. Anything. No internet access. I try hard restarts on my iphone. I try assigning IP addresses by MAC address. I try resetting the AE. I try renaming the WiFi name. Nothing. I can make a guest network that works (on a different IP table, btw - 172, not 192.) But other than that, no access. Grrrr.
So I have a "working" AE router where some devices successfully connect (through wifi and ethernet) and some dont' (wifi iPhone). My iPhone connects fine to my home TC. So shouldn't be anything to do with that. But I'm at a loss. I'm going to go back and restore everything and power cycle everything tonight or tomorrow night. I don't know if that will help, but it's worth a try. Lord knows it feels like I've tried everything else.
Anyone have any good ideas of where to start besides voodoo dolls and baseball bats?

I took mine back, because I was having these very same issues. We use contivity too. I was able to connect only to one of three of the servers we manage (in Europe). I couldn't connect to the servers in Asia or here in the USA.
Replaced the Airport Extreme with my trusty old d-link 624, and no issues connecting to any of the three hubs.
Otherwise, I liked the Airport Extreme, and I'll consider buying it again when and if they address this VPN issue. I work at home so its obviously a "deal breaker" for me.

Can I connect a 4 TB USB drive to the airport extreme and use it as a network drive for Time Machine

Can I connect a 4 TB USB drive to the airport extreme and use it as a network drive for Time Machine

Yes, if the drive is formatted in Mac OS Extended (Journaled).
The USB port on the Time Capsule is under powered, so you may need use a powered USB hub with the 4 TB drive...even if it has its own power supply.

How to Set Up Time Capsule With Airport Extreme and Airport Express

Just got a new 1TB Time Capsule. I want it to be the main base station for my network. I already have a network set up with an older Airport Extreme base station and an Airport Express to extend it. I am thinking that rather than setting up the Time Capsule to "join" the old network, the best approach is to disconnect the Airport Extreme and Airport Express and reset them. Then set up the Time Capsule as a brand new network and bring the reset Aiport Extreme and Express onto the new network as if my original network never existed.
Is that the right approach or am I complicating it? Can I just join the Time Capsule to the existing network and still make it the main base station for the network?

evelK wrote:
Just got a new 1TB Time Capsule. I want it to be the main base station for my network. I already have a network set up with an older Airport Extreme base station and an Airport Express to extend it. I am thinking that rather than setting up the Time Capsule to "join" the old network, the best approach is to disconnect the Airport Extreme and Airport Express and reset them. Then set up the Time Capsule as a brand new network and bring the reset Aiport Extreme and Express onto the new network as if my original network never existed.
Is that the right approach or am I complicating it? Can I just join the Time Capsule to the existing network and still make it the main base station for the network?
I'd first use AirPort Utility to "Save a Copy As" of your AirPort Extreme settings. Then disconnect it, connect the Time Capsule in its place, and use AirPort Utility's "Import" function to read those settings. (Both of those functions are under AirPort Utility's "File" menu.) You may have to adjust a few settings. Once you have the Time Capsule working as you want, you can reconfigure your AirPort Extreme unit as you wish.

My Airport Extreme and Time Capsule both cannot do not mount my Seagate USB external hard.

My Airport Extreme and Time Capsule both cannot do not mount my Seagate USB external hard.
I am running OS 10.7.5
Both the TC and AE are updated to 7.6.1
The Seagate drive in formatted: Journaled HFS+
I tried everything on Apple's Article: HT1331 and the basic reboots and restarts.
"Next"

It sounds like you may be confusing "mount" with "recognize".
Connect the drive to the USB port on the AirPort Extreme
Open Macintosh HD > Applications > Utilities > AirPort Utility
Click on the AirPort Extreme icon, then click Edit
Click the Disks tab
Does the AirPort Extreme "recognize" your hard drive? If yes, it will be displayed in the window.
See example below of a WD 500 GB drive connected to the AirPort Extreme.
If your drive is formatted HFS+ and it does not appear here, then you will almost certainly need to use a powered USB hub with the hard drive.....even if the hard drive has its own power supply. The USB port on the AirPort Extreme and Time Capsule is under powered.
Post back when the drive is "recognized" and we will next "mount" the drive.....although you likely already know how to do this.

How to setup a network with a time capsule, airport extreme and an airport express?

Hello.
First I want to make it clear all my knowledge off wireless networks is going on forums on the internet, before a couple of months ago I didn't realize wireless networking was so intricate so forgive my lack of experience.
I just bought a time capsule (today, 4th generation), I have an airport extreme bought in January 2011 (they just got refreshed so mine is now one generation old) and the same with my airport express (bought in January).
I originally bought the airport extreme and setup a wireless network using the dual band setup. I have no issues with the 5ghz network and most of my devices run on wireless n so I had no issues with them. my only two wireless devices that can not use the 5ghz network is my iPhone 4's which use wireless n but it has to use the 2.4ghz signal. Problem is in my apartment I am bombarded with other peoples 2.4ghz networks so my signal is terrible 10-15 feet from the airport extreme. Near my extreme I am getting signal ranges around 15mb to 20 mb. When Im about 15 minutes away in my bedroom (so one wall in between) my signal plummets to 1-2 mb. sometimes as low as 0.17mb which is not good. I got the airport express to extend my range and placed it in my bedroom. . After setting up the airport express the signal still was terrible. I researched and realized that if the signal strength ***** then the airport express cant boost the signal as much which makes sense in hind sight. I then researched setting up a roaming network or a WDS network. Per research a WDS network was not recommended b/c I was not using a wireless g network. I attempted to create a roaming network and then realized that you can not use an airport express in a roaming network. This has led me to now buy a time capsule.
First, in my setup do I or should I have the time capsule as the primary? I believe its more powerful than the airport extreme but Im not sure if that matters in a network that is distributing wifi from ethernet (thats how I am connected the extreme and the time capsule)
so can I do
cable modem ETHERNET Airport extreme(in the living room where its always been and works great in that immediate area) (3rd generation) ETHERNET Time Capsule(in the bedroom where I usually get poor signal) (4th gen) and then an airport express connecting to the 2.4ghz signal in the bedroom where the time capsule also is EXTENDING the wireless range?
or should it be the time capsule first bc its more powerful?
I tried setting up this setup and everything is green but I don't know if what I am doing is actually working on full cylinders b/c I am confused on some aspects. mainly on the airport extreme which is the primary device I have under the wireless tab selected create a wireless network and on the time capsule it also is on create a wireless network with the network name being exactly the same. Should it be changed to extend a wireless network? and then bridge mode? Should I have different channels for the different devices that are on 2.4ghz?
I am open to hear ANY suggestions, or ideas to improve my setup. PLEASE PLEASE HELP!!!!!!!, lol its been 5 long months of poor internet in my bedroom where my wife has her setup with a roku box and wifi tv (I have those hardwired for now) but mainly for her iPad and iPhone b/c its so bad sometimes she has to turn wifi off and use 3G. I have same issue in my bathroom, sometimes Im getting decent signal and sometimes its so bad I can't open the link on an RSS feed in safari which I have to assume doesn't require that much bandwith?
I have no wireless g devices. The only device I need 2.4ghz for is my iPhone 4's but they both use n also. All my other deivices connect on 5ghz and my 5ghz network is decent, a lot better than the 2.4ghz network atleast.

You wrote so much that I find it hard to address all your concerns. However, here are some thoughts:
1) I'd configure the Time Capsule as the "main" router, connected directly to your cable modem. Configure it to "create a wireless network" and to "Allow this network to be extended". Configure the other devices to "Extend a wireless network".
2) Put any device that's extending the network half way between the main router and the wireless clients. If the signal from the main router is weak at the cllient's location, then the extending device will also receive a weak signal.

Using an Airport Extreme and a Time Capsule at the same time

Guys I have had an Airport Extreme and a Time Capsule running together for nearly a year now and over the last few days the TC has been behaving badly. I changed its settings and now I'm in a mess. No, I can't remember the previous settings
Does anyone have a definitive list of the settings I need please? I have an ethernet cable modem, and the Airport Extreme is plugged into that as the main router. Two computers and the Time Capsule are plugged into the Airport Extreme using ethernet. The Time Capsule at the moment is just used as a network drive for Time Machine, but at some point I want to move it, with a long ethernet cable, and use it for extending the wifi in the house.
1. Should I connect the TC using its WAN port or one of the other ethernet ports? At present it's one of the other ones.
2. What TC settings should I use to have it function purely as a hard drive? At the moment there's some kind of conflict and my internet connection drops every 30 minutes.
3. Then later, what settings will I need to get the ethernet connected TC to extend the range of my wifi?
I read the Apple doc about WDS and tried setting the TC up that way. Then I discovered there is no WDS option in the AE Wireless settings. Only "Create a wireless network" or "extend a wireless network". The same setting on the TC has these options: "Create a wireless network" "Participate in a WDS network" or "extend a wireless network". Both devices have firmware 7.5.2. It didn't work with only the TC set for WDS, of course, but after that I can't get it back the way it was - which wasn't reliable anyway
Any help in exactly what the Wireless and Internet settings should be would be massively useful. Thanks!

If you use the extreme as a router then the tc should be connected via its wan port to one of the lan ports on the extreme. Tc should be set up in bridge mode. Basically you could set it up to create another wireless network beside the one created by the extreme. There is no need to use WDS or extend the other network.
Use the same SSID and password for both machines. Computers will connect to the strongest signal.

Help With Airport Extreme and External Hard Drive

I just purchased the Airport Extreme and I couldn't have been happier. I have attached my western digital external hard drive, but I have run into a slight problem/dilemma which I'm hoping someone who is apple savvy can help me out.
I live in a house with a couple of other guys and so I put all of my movies and media onto the hard drive so we can stream it throughout the house, but how do I make sure that someone won't accidently delete the files (The copies on the hard drive are the only ones I have)? I have tried to right click "get info" and change the sharing & permissions properties on the folders that I don't want deleted, but it doesn't save the changes or even allow me to select another option other than Read & Write. I formated the hard drive with the disk utility before I connected it to the AirPort so I know that it has nothing to do with the format of the drive. I also tried to create different user accounts for each roomate so that they could view the files (Read Only) but I get an error message explaining that if I continue, the contents of the hard drive will not be accessible. I'm sure its something simple but I'm obviously missing it.
Thanks!

Airport Utility under Disks/File Sharing has guest access rights.

Printing with a USB printer using Airport Extreme and Vista

I have a airport extreme and it prints fine with all of my Macs.
I bought a VAIO installed with Vista and the lastest service pack. Here is what I have done
* Installed Bonjour Printing software on the Windows Machine
* Installed the print drivers on the Windows Machine
* Bonjour finds the printer and driver without any problem
* When I test the printer will print either one page or half of one page and then I get an error message.
* I enabled the UDP 5353 port in the Firewall
The printer is a Epson Photo R220
I have no problems with the Macintosh works great and I have no problems with the Windows machine connecting to the Airport for internet usage.
If anyone out there has a solution I would very appreciative.
Thanks

No help from the forum. I used Bonjour for Windows.

IPads, Airport Extreme and Printing

Hi all,
I bought an Airport Extreme and have plugged a printer into the USB. The instructions imply anything on the Airport network should be able to use the printer.
Both my desktop and laptop Macs can, but I was really surprised to find that our iPads can't see it. It is enabled in Airport, but I haven't done anything with Bonjour.
I've looked through posts on here and it seems that for some reason iPads can't connect to a printer on Airport Extreme... this seems really, really odd!
I have no intention of buying an HP printer, which seems to be the only straightforward option. I tried searching for an oft-mentioned App called "Printopia" but it's no longer on the (Canada) app store.
This really does beggar belief.... it's only printing, for goodness sake! Surely it's just a matter of streaming data to a printer... which the iPad should surely be able to do over the air to the Airport Extreme??
Does anyone have any ideas how I can print from an iPad, without buying another printer?
All advice appreciated!

Thanks both.
I didn't think about drivers as I haven't had to install one for Mac for (probably) years! Things all just work when plugged in!
I tried Canon but their software only works with their wireless printers, which doesn't help me.
I didn't realise Printopia works just from a Mac.... in which case I might as well carry on doing what I'm doing now... emailing or synching docs through iTunes and print from the Mac.
Lets hope other printer manufacturer's make AirPrint capable machines soon...

Airport Extreme and connecting a hard drive

Hello All,
Thank you ahead of time for your help! I have a couple of questions regarding the set up of my airport extreme and an external hard drive.
What I want to accomplish is using the airport extreme to ONLY share a hard drive for backup and sharing other files through out the house. My housemates already have the internet going through their router, so there is for the airport extreme. Can a macbook pro (13in intel) receive two wireless signals, one that is the internet and the other from my airport extreme (that shares my hard drive)? If so, how is this done?
Any assistance would be more that appreciated!!
Thanks!!

Hello njoza. Welcome to the Apple Discussions!
The simplest way to accomplish this would be to connect the 802.11n AirPort Extreme Base Station (AEBSn) to the Internet router by Ethernet; reconfigure the AEBSn as a bridge, and disable its wireless radios.
In this configuration, you can still share out the hard drive and only need to connect to the Internet router's wireless network for both drive & Internet access.

Airport extreme and HP printer over ethernet problem

I'm new here, so forgive me if this topic has been done to death. I'm running airport extreme and have an HP photosmart 2600 connected to it via ethernet. My wife has no trouble printing with her Macbook Pro (Snow Leopard), but my daughter's older iMac only prints very intermittantly and mostly not at all.I've tried all the sharing options and reinstalling/updating the HP software, but no luck. The printer is at the other end of the house from the Airport, so connecting via usb is not an option. Any assistance much appreciated, thanks.

Using Ethernet should give the best results, plus it allows the use of more than just the print function, which USB would not. Proof of that should be the fact that this older HP model (it works with OS 9!!!) works well with your recent Mac's Snow Leopard OS.
If the iMac has OS X 10.5.8, the correct printer driver should have already been installed and no further update would have been needed. All that should have been needed was to open the Print & Fax panel of System Preferences and add the HP printer as the iMac's default printer.
When the iMac was first unable to print using the HP, did you consider any chance that the iMac was too far from the Extreme, or that there might have been some interference involved? Did you power cycle starting with the modem? When power cycling is necessary, printers seem to throw off unexplainable errors (such as out of paper or ink, paper jam - when none of these is true).

I have AirPort Extreme and cannot connect to the internet with a land line but the WiFi works

I have an AirPort Extreme and have been using for several months successfully, but as of two weeks ago, the line that I have hooked up to my desktop no longer provides internet service, but the WiFi works fine for the I-Pad and I-Pod.
I have checked with my service provider and my modem works successfully hooked up the the AirPort extreme or directly to the PC. When I am hooked in from the modem directly to my PC, I have internet for my desktop, but of course no WiFi.
If I connect the Modem to the Router and the router to my desktop, I have WiFi, but no internet service to my desktop.
I have replaced the network cable but to no avail.
Any suggestions?

It appears that there may be something amiss with the Ethernet switch that is built-in the 802.11n AirPort Extreme Base Station (AEBSn) or its configuration settings may be incorrect. I assume that you also tried using the other LAN ports on the AEBSn and the outcome was the same ... no Internet access via a wired connection.
One thing to try is to change the Ethernet adapter settings on the PC. It is possible that its current settings may be appropriate when connected directly to the Internet modem, but may be off for connecting to the AEBSn. If your PC's Ethernet adapter has options to control Speed, Duplex, & MTU, I would change these to the following respectively: 1000 Mbps, Full duplex, & 1500

I bought a airport-extreme but the software to program only works on Windows 7 to get it to work. Any work around?

I bought an Airport-Extreme but the software to program it only works on Windows 7 and above and I have an XP? Any work around?

Have you tried AirPort Utility 5.5.3 for Windows
You need to have XP SP3 installed on your PC to run this version of AirPort Utility.

Windows, Mac Non-wireless Mac, Airport Extreme and Printer

I bought a Canon Pixma MP500 printer at the Tice's Corner Apple Store. We wanted to put this in the back of our Airport Extreme and did so. Here is our hook up:
eMac Airport Extreme Cablevision Cable Modem
Printer
The eMac goes through the ethernet input, and the other ethernet input goes to the cable modem. We have a printer in the back hooked up as well. This Airport Extreme provides wireless security and working WiFi internet to the eMac, a wireless iBook G4 and a wireless HP-Compaq NC6220 Windows XP computer. We have the macs hooked up to printing correctly, just not the HP-Compaq. Thus it is wireless nad connects to our internet interface fine (yes, the wireless switch is on), it is a company computer with a VPN and firewall (that allows for printer installation). Note that the HP-Compaq nc6220 uses Intel ProSet Wireless as its wireless client. I tried installing Bonjour for Windows and the steps in the article in the link: http://docs.info.apple.com/article.html?artnum=107998and it did not work. Therefore, I cannot wirelessly print on all 3 computers. The main problem is the HP-Compaq. I am out of things to try.
If anyone has any advice, I would apreciate them to post back. Check back soon,
thatthaneguy
HP-Compaq nc6220 Windows XP Windows XP Professional

If the PC is connected to the work VPN then it is part of the work network and can no longer access local resources on your network such as a printer.
If the VPN is not operating then try these guides.
Printing from a Windows XP PC to a printer attached to an Airport Extreme Base Station or Airport Express
http://www.ifelix.co.uk/tech/1004.html
Printing from a Windows XP PC to a printer attached to an Airport Extreme Base Station or Airport Express using Bonjour
http://www.ifelix.co.uk/tech/1008.html
Problems with finding Printer Driver on Windows XP when using printer connected to Airport Extreme or Express
http://www.ifelix.co.uk/tech/1012.html
iFelix

Airport Extreme and its software.

Similar Messages

Maybe you are looking for