Airport Extreme and Multiple Expresses with iTunes

I have an airport extreme base station running a bgn network and six airport expresses connected (three wired and three wireless) to stereo systems throughout the house. They seem to stumble all over themselves with an IP address distribution or something that makes them cut in and out after playing for about 20 minutes. I've tried assigning IP addresses but it doesn't seem to work. I'm guessing that one of the wireless expresses loses signal for a second and that causes all the issues. Any thoughts?

So the airport extreme is setup and the wireless is going. But when I hook up the airport express, I've plugged it in and when I use airport utility through the desktop which is hardwired connected to the airport extreme, the express does not show up the devices list.
Can somebody explain to me how the airport express is used to boost the signal of the airport extreme using airport utility within windows vista? thanks!

Similar Messages

  • Just bought a brand new Airport Extreme and having trouble with it being recognized. I have a Mac version 10.5.8. Is my computer compatible?  I have the Airport Express now and it works fine.

    Just bought a brand new airport extreme and having trouble with it being recognized.  My mac is version 10.5.8.  What should I do?

    The new AirPort Extreme needs the 6.x version of AirPort Utility, which comes packed in with Lion 10.7.5 or Mountain Lion 10.8.x......or......you can also configure the device using an iPhone or iPad running a recent iOS.
    From Apple's Specifications:
    Setup and Administration
    iPhone, iPad, or iPod touch with iOS 5 or later and AirPort Utility 1.3
    Mac with OS X Lion v10.7.5 or later and AirPort Utility 6.3
    A few options.....
    Borrow another Mac running Lion or Mountain Lion for 10-15 minutes and set it up. The Mac running 10.5.8 will be able to connect to the wireless....but it will not be able to make any changes to the configuration of the Extreme.
    Update to Lion or Mountain Lion.....but check first to make sure that your Mac will support the operating system first.
    Use....or borrow an iPhone or iPad to set up the Extreme

  • TS1253 i have airport extreme, and printer works with my imac, but not with my mac book pro??

    i tried setting up the printer under my wireless network only, and using the printer information, tried both and nothing works, my imac's same settings for the printer, and just cant get it to work.
    i am ussing airport extreme, and it shows printer conecting etc. but then it says not programed correctly and it fails.
    i dont know what else to try, i have followed every step on the manual, and nothing works..
    someone help me

    Could you open System Profiler on the iMac and the MBPro and select the Printers entry. Then in the top right pane you can select the printers entry and the bottom right pane will show information about your setup. Can you copy this information from both Mac's and paste back here.

  • Setting up airport extreme and express

    i purchased both the airport extreme and the express. i have cable modem and use a router (to it i have connected vonage phone and an external drive). from the router, i have successfully hooked up my airport extreme.
    i now want to hook up my airport express in another room, so i can use it to connect to speakers and listen to music.
    when i plug in the airport express, i dont get a connextion (amber light blinking). i have not bought the speakers/system yet, so i dont have any cables hooked to it. could this be the reason as to why i am not getting a connetction?
    i also thought that i did not need to hook up anything to it, since this would just extend my wireless connection (i use a macbook and ibook)
    any thoughts?
    g5., imac, macbook   Mac OS X (10.4.8)   fairly new to apple

    You will want to set up the AX as a wireless client...
    To set up AirTunes on the AirPort Express Base Station (AX), using the AirPort Admin Utility, connect your computer directly (using an Ethernet cable) to the Ethernet port of the AX, and then, try these settings:
    AirPort tab
    - Base Station Name: <whatever you wish or use the default>
    - Wireless Mode: Join an Existing Wireless Network (Wireless Client)
    - Wireless Network: <select the existing wireless network>
    Music tab
    - Enable AirTunes on this base station (checked)
    - Enable AirTunes over the Ethernet port (optional)
    - iTunes Speaker Name: <whatever you wish>
    - iTunes Speaker Password (optional)
    In iTunes:
    iTunes > Preferences... > Advanced > General
    - Look for remote speakers connected with AirTunes (checked)

  • How to Set Up Time Capsule With Airport Extreme and Airport Express

    Just got a new 1TB Time Capsule. I want it to be the main base station for my network. I already have a network set up with an older Airport Extreme base station and an Airport Express to extend it. I am thinking that rather than setting up the Time Capsule to "join" the old network, the best approach is to disconnect the Airport Extreme and Airport Express and reset them. Then set up the Time Capsule as a brand new network and bring the reset Aiport Extreme and Express onto the new network as if my original network never existed.
    Is that the right approach or am I complicating it? Can I just join the Time Capsule to the existing network and still make it the main base station for the network?

    evelK wrote:
    Just got a new 1TB Time Capsule. I want it to be the main base station for my network. I already have a network set up with an older Airport Extreme base station and an Airport Express to extend it. I am thinking that rather than setting up the Time Capsule to "join" the old network, the best approach is to disconnect the Airport Extreme and Airport Express and reset them. Then set up the Time Capsule as a brand new network and bring the reset Aiport Extreme and Express onto the new network as if my original network never existed.
    Is that the right approach or am I complicating it? Can I just join the Time Capsule to the existing network and still make it the main base station for the network?
    I'd first use AirPort Utility to "Save a Copy As" of your AirPort Extreme settings. Then disconnect it, connect the Time Capsule in its place, and use AirPort Utility's "Import" function to read those settings. (Both of those functions are under AirPort Utility's "File" menu.) You may have to adjust a few settings. Once you have the Time Capsule working as you want, you can reconfigure your AirPort Extreme unit as you wish.

  • How to setup a network with a time capsule, airport extreme and an airport express?

    Hello.
    First I want to make it clear all my knowledge off wireless networks is going on forums on the internet, before a couple of months ago I didn't realize wireless networking was so intricate so forgive my lack of experience.
    I just bought a time capsule (today, 4th generation), I have an airport extreme bought in January 2011 (they just got refreshed so mine is now one generation old) and the same with my airport express (bought in January). 
    I originally bought the airport extreme and setup a wireless network using the dual band setup.  I have no issues with the 5ghz network and most of my devices run on wireless n so I had no issues with them.  my only two wireless devices that can not use the 5ghz network is my iPhone 4's which use wireless n but it has to use the 2.4ghz signal.  Problem is in my apartment I am bombarded with other peoples 2.4ghz networks so my signal is terrible 10-15 feet from the airport extreme.  Near my extreme I am getting signal ranges around 15mb to 20 mb.  When Im about 15 minutes away in my bedroom (so one wall in between) my signal plummets to 1-2 mb. sometimes as low as 0.17mb which is not good.  I got the airport express to extend my range and placed it in my bedroom. .  After setting up the airport express the signal still was terrible.  I researched and realized that if the signal strength ***** then the airport express cant boost the signal as much which makes sense in hind sight.  I then researched setting up a roaming network or a WDS network.  Per research a WDS network was not recommended b/c I was not using a wireless g network.  I attempted to create a roaming network and then realized that you can not use an airport express in a roaming network.  This has led me to now buy a time capsule.
    First, in my setup do I or should I have the time capsule as the primary?  I believe its more powerful than the airport extreme but Im not sure if that matters in a network that is distributing wifi from ethernet (thats how I am connected the extreme and the time capsule)
    so can I do
    cable modem ETHERNET  Airport extreme(in the living room where its always been and works great in that immediate area) (3rd generation)  ETHERNET Time Capsule(in the bedroom where I usually get poor signal) (4th gen)  and then an airport express connecting to the 2.4ghz signal in the bedroom where the time capsule also is EXTENDING the wireless range?
    or should it be the time capsule first bc its more powerful? 
    I tried setting up this setup and everything is green but I don't know if what I am doing is actually working on full cylinders b/c I am confused on some aspects.  mainly  on the airport extreme which is the primary device I have under the wireless tab selected create a wireless network and on the time capsule it also is on create a wireless network with the network name being exactly the same.  Should it be changed to extend a wireless network? and then bridge mode?  Should I have different channels for the different devices that are on 2.4ghz? 
    I am open to hear ANY suggestions, or ideas to improve my setup.  PLEASE PLEASE HELP!!!!!!!, lol  its been 5 long months of poor internet in my bedroom where my wife has her setup with a roku box and wifi tv (I have those hardwired for now) but mainly for her iPad and iPhone b/c its so bad sometimes she has to turn wifi off and use 3G.  I have same issue in my bathroom, sometimes Im getting decent signal and sometimes its so bad I can't open the link on an RSS feed in safari which I have to assume doesn't require that much bandwith?
    I have no wireless g devices.  The only device I need 2.4ghz for is my iPhone 4's but they both use n also.  All my other deivices connect on 5ghz and my 5ghz network is decent, a lot better than the 2.4ghz network atleast.

    You wrote so much that I find it hard to address all your concerns.  However, here are some thoughts:
    1) I'd configure the Time Capsule as the "main" router, connected directly to your cable modem.  Configure it to "create a wireless network" and to "Allow this network to be extended".  Configure the other devices to "Extend a wireless network".
    2) Put any device that's extending the network half way between the main router and the wireless clients.  If the signal from the main router is weak at the cllient's location, then the extending device will also receive a weak signal.

  • Using a current Time Capsule with Airport Extreme and Airport Express Older generation

    I am looking to achieve a fast local network that allows streaming of music and video. I have bought a Time Capsule to replace the Telstra router (Thomson Router) by linking it using ethernet cable and then set up a network that also uses and older airport extreme and express router (g standard).
    It would appear that the local network speed is slow - how can I assess the connection speed in the local network - both wireless and for ethernet?  I believe that there is a speed indication on my two older macs running OSX 10.5 but not in OSX 10.6.  Is there a tool to assess the local network speed?
    The current set up works less well than previously only using the Thomson router, so the initial results are very disappointing.  Not even streaming music seems to work and it stutters to halt.
    I had expected that the dual band functionality would allow fast local connections where needed.  What do I need to change?
    Thanks you.
    Tom

    Hi Bob,
    The two old airports (extreme and express) are connected wirelessly to the time capsule base station with the following use:
    - round extreme base station supports a printer only - remote WDS indicated in set up
    - airport express supports remote speakers - set up does not indicate WDS status
    I noticed in another note to provide a second network name to 5GHz network and connect the modern computers, ipad (seems to be able to connect) and apple tv to the 5 GHz network, leaving the other on the separate network.  Also the two computers, apart from the laptops are connected via ethernet to use the GB ethernet, but I am not sure whether that speed is achieved or whether a firewire connection between the two would be better. use examples are:
    1. Wirelessly I am trying to use three speakers - computer, apple tv and express - to have to listen to the same music in three rooms.
    2. Over ethernet, I am using the the powermac as a file server to mac mini, but would like to be bale to access photo libraries (both Iphoto and Aperture) ideally over the network.  It works well with starting the powermac in target disk mode but seems slow over what should be a very fast ethernet network.
    The connection with the service providers router and time capsule is bridged - seems to be the only way of providing internet access - however, it also seems to allow for shared devices to be visible across the two time capsule and the Thomson network. 
    Obviously, this will need some more experimentation but any input would be appreciated.
    Thank you and regards,
    Tom
    PS> Timezone wise I am currently living in Australia - must change my profile one day.....

  • Trouble with airport extreme and express

    Hey all. I recently bought a new airport extreme and I'm now having problems setting up a network with the airport express. the airport express that we have is connected to a very old G3 iMac because it doesn't have an airport card and is upstairs. I have so far managed to set up the airport extreme so my G4 iBook and my MacBook Pro are both connected via wireless. The trouble seems to be that I can't get the next step set up as i'm not very experienced with networks and I can't get the express to establish a connection with the extreme. i hope somebody could help me sort out the next step. On a side note, this new airport extreme doesn't allow my xbox 360 to connect to it and i wondered if there is any way I can get it to connect again via wireless, either by changing a setting or the security?
    Any help and feedback would be greatly appreciated,
    Thanks.

    applefan08, Welcome to the discussion area!
    To continue to use the AirPort Express (AX) to give Internet access to the iMac G3, you will need to configure the 2 devices to use WDS to wirelessly connect. The instructions start on Page 41 in "Designing AirPort Extreme 802.11n Networks" (http://manuals.info.apple.com/en/DesigningAirPortExtreme802.11nNetworks.pdf).

  • Speed issue with WDS, Airport Extreme, and Airport Express 802.11n

    I have a Airport network set up using WDS and two airport base stations: an Airport Extreme 802.11n, and an Airport Express 802.11n. The Extreme is configured to be WDS main and is connected to my cable modem and other computers, while the express is WDS relay and acts as a switch.
    I don't actually have any wireless clients connecting to the express. I'm using it to connect a mac with no airport card to the network by plugging it into the ethernet port on the express. For the most part, it works, and the mac gets a network address and can access the network. However, the connection speed from the Express to the Extreme seems slower than it should be.
    Since both are 802.11n, and the Mac is plugged into the Express's 10/100 ethernet port, I figure the theoretical top speed that the Mac should be able to communicate with another device plugged into the Extreme is at around the same speeds as 100 mbps ethernet, since the 100 mbps ethernet connection should be the bottleneck in this case. In reality, the speeds are much slower: when I transfer files between a machine connected to the extreme (via ethernet) and my mac, the speed tops out at about 2 megabytes a second, if that.
    I looked in the Airport Extreme's logs, and it indicates that the Express is only connected at 54 mbps, as though it were a 802.11g Express. I have no idea why this is! Also, the only wireless communication is between the Extreme and the Express, so one wireless device acting as a relay for another (and thus cutting the throughput in half) shouldn't be an issue.
    Does anyone know why the speeds are so slow, and if there's anything I can do to improve them?

    Hello Brian Kendall. Welcome to the Apple Discussions!
    I looked in the Airport Extreme's logs, and it indicates that the Express is only connected at 54 mbps, as though it were a 802.11g Express. I have no idea why this is!
    That is because you established a WDS which only runs in 802.11g. Since you have two 802.11n base station, you would want to take advantage of the "Extend a network" feature available with these base stations.
    Here's a typical setup:
    o If practical, place the base stations in near proximity to each other during the setup phase. Once done, move them to their desired locations.
    o Open AirPort Utility and select the base station that will connect to the Internet.
    o Choose Manual Setup from the Base Station menu, or double-click the base station to open the configuration in a separate window. Enter the base station password if necessary.
    o Click AirPort in the toolbar, and then click Wireless.
    o Choose “Create a wireless network” from the Wireless Mode pop-up menu, and then select the “Allow this network to be extended” checkbox.
    o Next, select the base station that will extend this network, and choose Manual Setup from the Base Station menu, or double-click the base station to open its configuration in a separate window. Enter the base station password if necessary.
    o Choose “Extend a wireless network” from the Wireless Mode pop-up menu, and then choose the network you want to extend from the Network Name pop-up menu.
    o Enter the base station network and base station password is necessary.
    o Click Update to update the base station with new network settings.
    (ref: Page 46 of "Designing AirPort Networks Using AirPort Utility.)

  • How does one sync the new time capsule with the old airport extreme and airport express in order to extend range?

    How does one sync the new time capsule with the old airport extreme and airport express in order to extend range?

    Thanks for the additional information.
    Unfortunately, the AirPort Utility application in the Lion and Mountain Lion operating systems, which is used to configure the new Time Capsule does not support the older versions of the products that you have.
    Even if it did, there are no settings on the older AirPorts to "Extend a wireless network", so they are not compatible with the new Time Capsule if you intend to extend the network only using wireless connections.
    If you have the ability to connect each AirPort to the Time Capsule using a permanent wired Ethernet cable connection, it might be possible to use a complicated workaround to install an older version of AirPort Utility to configure the older AirPorts to work with the new Time Capsule.
    If you have another Mac there that is using the Leopard or Snow Leoapard operating system, things would likely be simpler. I have not done this type of procedure to mix a new Time Capsule with older AirPorts, so I would not be able to say whether this would work or not.

  • HT4628 Intermittent reception when streaming music via Airport Extreme and Airport Express to powered speakers. Is this a problem with the Extreme?

    i get intermittent reception when I stream music from I Tunes via Airport Extreme and Airport Express to powered speakers. I Tunes continues to play uninterupted on the Mac.  The problem does not lie with the Express as it occurs on both of my 2 Express at the same time. is this a problem with the Extreme?

    Well, repying to my own post... Might have found the solution: I tried to do the same with a Macbook Pro 2010 using the very same setup. And it worked perfectly! No freeze, no nothing.
    One explanation I see:
    my iMac is dating back to May 2007, a Core 2 Duo 2,16Ghz with 2 Go of RAM.
    So the computer's characteristics (or the Wifi component or the combination of all of this) might be not robust enough to allow streaming to those 2 devices...
    Anyone's got anything to add?

  • Airport Extreme and Airport Express on Ethernet Wired Network

    I recently did work on my house and now have the house hard-wired for ethernet. I have an AirPort Extreme in my home office. That signal does not reach past the old part of the house (brick apparently blocks some of the signal). So I want to use my Airport Express in the new part of the house to have wireless in the new part as well.
    Currently, I have the Airport Extreme plugged into the network, with the Airport Express plugged into the network in the new room. I get wireless connection in the office, but not in the new room.
    I am not sure how to configure the base stations.
    -- Do I need to use WDS? I am not currently, because each wireless router has its own independent wired link to the network.
    -- Do I need to call the wireless networks by different names? Currently I have them both called the same thing.
    -- Do I need to set the Airports for a different channel? Currently I have one on 10 and one on 11.
    This should be very simple. Unfortunately, my experience has been that the Express base station is very difficult to configure, very quirky and not for the average user.
    BTW, the Express is hooked up to the stereo and iTunes plays through that-- but remember it is a hard wired connection. Also both Airports show up in the Admin Utility, so no problem there.
    Thanks.
    ~aviduser
    1. Macintosh SE (1988)
    2. PowerBook 180 (1993)
    3. PowerMacintosh 7600 (1996)
    4. PowerMacintosh G4 (2001)
    5. PowerBook G4 12" (2003)
    (Oh yeah, and there was the Newton MP2k)
    G4 867 Quicksilver Mac OS X (10.3.9)

    Do you have another router?
    If not:
    Connecting them together via Ethernet should be done like this:
    Internet -> [WAN] AEBS [LAN] --> AirPort Express
    The AirPort Express should so that the option to distribute IP addresses is disabled. The AEBS and Express should have the same network name and encryption configuration. The AEBS and Express should be on different channels.
    This configuration will put all the computers on the same subnet. All of the computers will get IP addresses from the AirPort Extreme base station (AEBS).
    OR connecting them via wireless should be done through WDS. The hardware connection should be done like this:
    Internet -> [WAN] AEBS
    The AirPort Express should not be connected to Ethernet.
    See KB 107454, AirPort Extreme and Express: Using WDS to create a network from multiple base stations.
    If you do have a router, then both AEBS and Express should be configured so that the option to distribute IP addresses is disabled. The hardware connections should be set up like this:
    Internet -> router -+-> [WAN] AEBS [LAN]
    ....................|-> AirPort Express
    The AEBS and Express should have the same network name and encryption configuration. The AEBS and Express should be on different channels.
    This configuration will put all the computers on the same subnet. All of the computers will get IP addresses from the router.

  • Difference between Airport Extreme and Airport Express

    What is the difference between Airport Extreme and Airport Express? My son is home from college and would like to use his Macbook for an online class. So I need a wireless router and I would also like to be able to play our iTunes over multiple speaker locations with my home stereo. Which one of these could accomplish this. Thanks in advance.

    If you can use just one device to both set up a WiFi network and connect to your stereo you have to use an Airport Express. If you have to use separate devices, for instance because your internet connection device and your stereo are not in the same location, you have to use an Express to stream to and you can use either an Express or an Extreme to set up the WiFi.
    By the way you have to use an Express for each stereo you would like to connect.

  • Some basic question of Airport Extreme and Airport Express

    As I know, my G4PB is installed Airport Extreme and it seems like working wireless Internet connection during travel. But which case do I need additional things like Airport Express (if I undestand this wireless technology correctly)?

    blue sky,If all really depends on what you are trying to achieve.
    If you wish to surf the Internet when you're out and about then you can just walk in to Starbucks, for example, and log-in - you already have all that is required.
    If you want to use the Internet wirelessly at home then the Apple Extreme Base Station, an Airport Express or much cheaper 3rd party gear can help (although some additional hardware may be required dependimg on how you connect to the Internet).
    If you want to surf wirelessly, stream music from iTunes to your home Hi-Fi and use a USB printer wirelessly then the Airport Express is the puppy.
    If you need to share an Internet connection as well as a network with many wired and wireless users then the Airport Extreme Base Station could help.
    Try reading the Airport Page to consolidate your ideas of what you want to achieve, or use this home networking wizard.
    Either way you should be aware that you don't have a Powerbook Titanium (On a Ti the ports are tidy on the back under a neat cover and it has a slim 1" thin design) but rather you have a PB Aluminium (ports scattered on either side and it's approx 1.25" thick!)
    mrtotes

  • Airport Extreme and Airport Express conflict and failure

    I spent 2.5 hours on the phone with Apple and still could not get my Airport Extreme and Airport Express to function. My Apple TV failed as well:
    * Connected AEX through Airport Utility to internet. Airport Utility replaced my old configuration on my LinkSystem router. Green light.
    * Checked Apple TV. No connection available. Unplugged cable modem, waited 1 minute and tried again. Apple TV connected. No problem.
    * Flashing amber light on Airport Express for Airtunes. Does not show up in wireless device list. I call Apple.
    * Reset Express. Still no signal. Connect via Ethernet cable. Reconfigure. Green Light. Music works.
    * Check internet connection, in order. Apple TV fails. No connection to server.
    * Apple TV reset. No connection. No wireless network found.
    * Reset Airport Express. Reconfigure channel specifications. No connection with ATV or Airport Express.
    * Disconnect Airport Express. Reconfigure. With ATV disconnected I get Airport Express back. Green light but this time no music. Remote speakers appear on itunes, but no music is transmitted.
    * Did a total wireless reset on Extreme, and now both Express and ATV are not working.
    Frustrated and dissapointed I disconnected everything put back my 5 year old Linksys router and within 15 seconds both ATV and Airport Express worked flawlessly.
    How can this happen? What is wrong with this device? It is my second one in a week. The first one made no wireless connection to my Mac at all.
    After sulking for hours I tried again, this time leaving the Express out of the equation and reconfiguring the ATV to take over airtunes. After a reset it did fine. Now I have a pure n signal running at 5hz. ATV works again. So does internet.
    Any suggestions? Is there something I did not try?
    I tried the Firewall trick, the accept all incoming connections trick, the disabling of the iv6 trick, the join a wireless connection trick, and everything else Apple Care could think of.

    Maybe I was not clear enough on my post and configurations,
    I had a Linksys before I purchased the airport extreme. My airport express joined the Linksys network for the purpose of airtunes. This worked flawlessly from day one.
    Airport Extreme asked in the utility to take over an existing network or replace a router. If you chose this option it adopts all passwords, wpa/2 configurations for security and such.
    I chose this option thinking that since it is an apple product it would take over everything and work. My airport express had origianlly been set to join my old Linksys network. Since the airport extreme took over this configuration it should work.
    Apple stated many times that there seemed to be a conflict and kept asking me about the placement of my airport extreme.
    My Linksys was never part of a bridge or a network within a network. It was removed before the Extreme was ever turned on.
    After all the problems and hours of trying with Apple, i find it funny that all I had to do to restore eveything was plug my old Linksys back in and conect all the cables, and bam....it worked.
    So what is wrong with the airport extreme, or is there something wrong with itunes 8 and its interface with the express? For whatever reason the extreme cannot make the express and my ATV work at the same time.

Maybe you are looking for